Sandip, I removed the code for adding vlan trunk from CVM and replaced the CVM is my setup. It’s based on the master-235. I couldn’t reproduce the issue by manually launching the VM’s. I wasn’t able to launch the test container since ci-repo(10.84.5.81:5010) in sunnyvale went down. Can you try reproducing the issue on my setup at 10.84.16.10. From Vmware testing we know that when your system was in failed state and any modification on VM PG manually used to bring the system out of the failed state. Master 235 steps you have listed below is programmatically doing the same thing which we where manually doing. But if we can re-produce the issue on my setup I can apply the modified patch with PG having trunking change and see if works consistently then at least it can be a work around. We will also try just the PG with trunk configuration with vlan override at PG create time to see if it works ( if this works then we can use this as fix, also ask VMware if it’s right configuration). This would be preferred fix if it works. Thanks, Ram From: Sandip Dey <