[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-34-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60-Ubuntu SMP Wed Aug 13 15:49:09 UTC 2014 (Ubuntu 3.13.0-34.60-generic 3.13.11.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aaabefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaabf000-0x00000000aaebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: TOSHIBA Satellite C845/Type2 - Board Product Name1, BIOS 1.20 03/01/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AB000000 mask FFF000000 uncachable [ 0.000000] 3 base 0AC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FF0000000 write-back [ 0.000000] 8 base 14F600000 mask FFFE00000 uncachable [ 0.000000] 9 base 14F800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x33ffffff] [ 0.000000] [mem 0x20200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c3c000-0x36e15fff] [ 0.000000] ACPI: RSDP 000fe020 000024 (v02 TOSQCI) [ 0.000000] ACPI: XSDT aaffe210 00009C (v01 TOSQCI TOSQCI00 00000001 01000013) [ 0.000000] ACPI: FACP aaffb000 00010C (v05 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT aafea000 00DDE7 (v01 TOSQCI TOSQCI00 00000000 ACPI 00040000) [ 0.000000] ACPI: FACS aafbb000 000040 [ 0.000000] ACPI: UEFI aaffd000 000236 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! aaffc000 0000A5 (v32 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET aaffa000 000038 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC aaff9000 00008C (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG aaff8000 00003C (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: SLIC aafe9000 000176 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: WDAT aafe8000 000224 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT aafe6000 001068 (v01 INSYDE CR CRB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT aafe4000 000028 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT aafdf000 000034 (v07 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: MSDM aafde000 000055 (v03 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT aafdc000 000044 (v01 TOSQCI TOSQCI00 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT aafdb000 0009D5 (v01 INSYDE CR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT aafda000 000A92 (v01 INSYDE CR CRB 00003000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4474MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x4f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xaaabefff] [ 0.000000] node 0: [mem 0xaafff000-0xaaffffff] [ 0.000000] node 0: [mem 0x00000000-0x4f5fffff] [ 0.000000] On node 0 totalpages: 1023068 [ 0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map f324c020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8949 pages used for memmap [ 0.000000] HighMem zone: 795330 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021284 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic root=UUID=485aa3c7-a5f9-4adb-851f-0b263095a170 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 10989560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0014f600) [ 0.000000] Memory: 4006532K/4092272K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 85740K reserved, 3181320K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b4000 - 0xc1a8e000 ( 872 kB) [ 0.000000] .data : 0xc1660632 - 0xc19b3e80 (3406 kB) [ 0.000000] .text : 0xc1000000 - 0xc1660632 (6529 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f2c0a000 soft=f2c0c000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2294.865 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.73 BogoMIPS (lpj=9179460) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000031] Security Framework initialized [ 0.000046] AppArmor: AppArmor initialized [ 0.000047] Yama: becoming mindful. [ 0.000087] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000089] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000272] Initializing cgroup subsys memory [ 0.000277] Initializing cgroup subsys devices [ 0.000278] Initializing cgroup subsys freezer [ 0.000280] Initializing cgroup subsys blkio [ 0.000281] Initializing cgroup subsys perf_event [ 0.000284] Initializing cgroup subsys hugetlb [ 0.000308] CPU: Physical Processor ID: 0 [ 0.000309] CPU: Processor Core ID: 0 [ 0.000313] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000313] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000316] mce: CPU supports 7 MCE banks [ 0.000327] CPU0: Thermal monitoring enabled (TM1) [ 0.000339] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000339] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000339] tlb_flushall_shift: 5 [ 0.000720] Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000) [ 0.001831] ACPI: Core revision 20131115 [ 0.001833] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.001927] ACPI: Forced DSDT copy: length 0x0DDE7 copied locally, original unmapped [ 0.009385] ACPI: All ACPI Tables successfully acquired [ 0.027390] ftrace: allocating 27783 entries in 55 pages [ 0.040880] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.041282] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080947] smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07) [ 0.080956] TSC deadline timer enabled [ 0.080971] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.080978] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.080980] ... version: 3 [ 0.080981] ... bit width: 48 [ 0.080983] ... generic registers: 4 [ 0.080984] ... value mask: 0000ffffffffffff [ 0.080985] ... max period: 0000ffffffffffff [ 0.080986] ... fixed-purpose events: 3 [ 0.080987] ... event mask: 000000070000000f [ 0.082543] CPU 1 irqstacks, hard=f2d60000 soft=f2d62000 [ 0.082545] x86: Booting SMP configuration: [ 0.092854] Initializing CPU#1 [ 0.095773] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.082546] .... node #0, CPUs: #1 [ 0.095859] CPU 2 irqstacks, hard=f2e38000 soft=f2e3a000 [ 0.106121] Initializing CPU#2 [ 0.095861] #2 [ 0.109091] CPU 3 irqstacks, hard=f2e7e000 soft=f2e80000 [ 0.119350] Initializing CPU#3 [ 0.109094] #3 [ 0.122247] x86: Booted up 1 node, 4 CPUs [ 0.122250] smpboot: Total of 4 processors activated (18358.92 BogoMIPS) [ 0.125620] devtmpfs: initialized [ 0.125799] EVM: security.selinux [ 0.125800] EVM: security.SMACK64 [ 0.125801] EVM: security.ima [ 0.125802] EVM: security.capability [ 0.125886] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes) [ 0.126839] pinctrl core: initialized pinctrl subsystem [ 0.126899] regulator-dummy: no parameters [ 0.126931] RTC time: 12:51:46, date: 08/16/14 [ 0.126969] NET: Registered protocol family 16 [ 0.127099] EISA bus registered [ 0.127101] cpuidle: using governor ladder [ 0.127102] cpuidle: using governor menu [ 0.127169] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.127171] ACPI: bus type PCI registered [ 0.127173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.127241] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.127243] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.127244] PCI: Using MMCONFIG for extended config space [ 0.127246] PCI: Using configuration type 1 for base access [ 0.128214] bio: create slab at 0 [ 0.128364] ACPI: Added _OSI(Module Device) [ 0.128365] ACPI: Added _OSI(Processor Device) [ 0.128367] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128368] ACPI: Added _OSI(Processor Aggregator Device) [ 0.156199] ACPI: Executed 1 blocks of module-level executable AML code [ 0.170700] ACPI: SSDT aae19018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.171216] ACPI: Dynamic OEM Table Load: [ 0.171219] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) [ 0.182566] ACPI: SSDT aae1aa98 000303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.183115] ACPI: Dynamic OEM Table Load: [ 0.183117] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123) [ 0.194425] ACPI: SSDT aae18d98 000119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.194930] ACPI: Dynamic OEM Table Load: [ 0.194931] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123) [ 0.207121] ACPI: Interpreter enabled [ 0.207133] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.207138] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.207152] ACPI: (supports S0 S3 S4 S5) [ 0.207154] ACPI: Using IOAPIC for interrupt routing [ 0.207181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.207477] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.214268] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.214273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.214403] \_SB_.PCI0:_OSC invalid UUID [ 0.214405] _OSC request data:1 1f 0 [ 0.214409] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.215186] PCI host bridge to bus 0000:00 [ 0.215189] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.215191] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.215193] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.215195] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.215197] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.215205] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.215303] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.215315] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.215321] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.215327] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.215437] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.215462] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit] [ 0.215538] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.215590] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.215626] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.215652] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit] [ 0.215732] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.215825] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.216084] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff] [ 0.217524] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.217593] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.217631] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.217650] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit] [ 0.217723] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.217777] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.217809] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.217893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.217949] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.217983] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.218067] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.218122] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.218155] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.218239] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.218298] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.218338] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.218588] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff] [ 0.220025] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.220091] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.220127] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.220313] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.220334] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.220343] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.220352] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.220361] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.220370] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.220380] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff] [ 0.220429] pci 0000:00:1f.2: PME# supported from D3hot [ 0.220507] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.220525] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit] [ 0.220547] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.220700] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.220814] pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000 [ 0.220848] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.220899] pci 0000:02:00.0: reg 0x18: [mem 0xc0500000-0xc0503fff 64bit] [ 0.221052] pci 0000:02:00.0: supports D1 D2 [ 0.221054] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.221101] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.226315] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.226326] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.226336] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc05fffff] [ 0.226544] pci 0000:03:00.0: [1969:2062] type 00 class 0x020000 [ 0.226639] pci 0000:03:00.0: reg 0x10: [mem 0xc0400000-0xc043ffff 64bit] [ 0.226689] pci 0000:03:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.227131] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.227228] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.234332] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.234343] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.234353] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff] [ 0.234423] pci_bus 0000:00: on NUMA node 0 [ 0.234958] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.235018] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.235075] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.235131] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.235187] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.235244] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.235300] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.235357] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.235779] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.235807] ACPI: \_SB_.PCI0: notify handler is installed [ 0.235874] Found 1 acpi root devices [ 0.235952] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62 [ 0.236042] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.236046] vgaarb: loaded [ 0.236047] vgaarb: bridge control possible 0000:00:02.0 [ 0.236225] SCSI subsystem initialized [ 0.236266] libata version 3.00 loaded. [ 0.236285] ACPI: bus type USB registered [ 0.236301] usbcore: registered new interface driver usbfs [ 0.236308] usbcore: registered new interface driver hub [ 0.236328] usbcore: registered new device driver usb [ 0.236430] PCI: Using ACPI for IRQ routing [ 0.243242] PCI: pci_cache_line_size set to 64 bytes [ 0.243300] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.243302] e820: reserve RAM buffer [mem 0xaaabf000-0xabffffff] [ 0.243304] e820: reserve RAM buffer [mem 0xab000000-0xabffffff] [ 0.243306] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff] [ 0.243389] NetLabel: Initializing [ 0.243391] NetLabel: domain hash size = 128 [ 0.243392] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.243402] NetLabel: unlabeled traffic allowed by default [ 0.243498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.243504] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.245535] Switched to clocksource hpet [ 0.251593] AppArmor: AppArmor Filesystem Enabled [ 0.251616] pnp: PnP ACPI init [ 0.251629] ACPI: bus type PNP registered [ 0.251667] pnp 00:00: [dma 4] [ 0.251692] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.251713] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.251811] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.251845] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.251891] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.251894] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.251896] system 00:04: [io 0xffff] has been reserved [ 0.251898] system 00:04: [io 0xffff] has been reserved [ 0.251900] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.251902] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.251904] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.251906] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.251909] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.251935] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.251982] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.251985] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.252016] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.252046] pnp 00:08: Plug and Play ACPI device, IDs TOS0310 PNP0f13 (active) [ 0.252184] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.252186] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.252188] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.252191] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.252193] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.252195] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.252197] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.252199] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.252201] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.252203] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.252206] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252488] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.252490] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved [ 0.252493] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.252570] pnp: PnP ACPI: found 11 devices [ 0.252572] ACPI: bus type PNP unregistered [ 0.252575] PnPBIOS: Disabled by ACPI PNP [ 0.288873] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.288888] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.288891] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.288897] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc05fffff] [ 0.288906] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.288909] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.288915] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff] [ 0.288924] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.288926] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.288928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.288930] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.288932] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.288934] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.288936] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.288938] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc04fffff] [ 0.288966] NET: Registered protocol family 2 [ 0.289101] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.289112] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.289128] TCP: Hash tables configured (established 8192 bind 8192) [ 0.289140] TCP: reno registered [ 0.289142] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.289147] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.289198] NET: Registered protocol family 1 [ 0.289209] pci 0000:00:02.0: Boot video device [ 0.321702] PCI: CLS 64 bytes, default 64 [ 0.321746] Trying to unpack rootfs image as initramfs... [ 0.653169] Freeing initrd memory: 18280K (f5c3c000 - f6e16000) [ 0.653241] Simple Boot Flag at 0x44 set to 0x1 [ 0.653467] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25 [ 0.653474] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25 [ 0.653483] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25 [ 0.653491] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25 [ 0.653558] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.653560] Scanning for low memory corruption every 60 seconds [ 0.653855] Initialise system trusted keyring [ 0.653892] audit: initializing netlink socket (disabled) [ 0.653901] type=2000 audit(1408193506.640:1): initialized [ 0.676402] bounce pool size: 64 pages [ 0.676411] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.677730] zbud: loaded [ 0.677788] VFS: Disk quotas dquot_6.5.2 [ 0.677831] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.678236] fuse init (API version 7.22) [ 0.678309] msgmni has been set to 1647 [ 0.678368] Key type big_key registered [ 0.678813] Key type asymmetric registered [ 0.678815] Asymmetric key parser 'x509' registered [ 0.678844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.678883] io scheduler noop registered [ 0.678885] io scheduler deadline registered (default) [ 0.678909] io scheduler cfq registered [ 0.679389] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.679403] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.679439] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.679440] vesafb: scrolling: redraw [ 0.679442] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.679676] vesafb: framebuffer at 0xb0000000, mapped to 0xf8480000, using 4160k, total 4160k [ 0.754776] Console: switching to colour frame buffer device 170x48 [ 0.829438] fb0: VESA VGA frame buffer device [ 0.829453] intel_idle: MWAIT substates: 0x21120 [ 0.829455] intel_idle: v0.4 model 0x2A [ 0.829456] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.829567] ipmi message handler version 39.2 [ 0.829680] ACPI: AC Adapter [ACAD] (on-line) [ 0.829791] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.829795] ACPI: Power Button [PWRB] [ 0.829829] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.829853] ACPI: Lid Switch [LID] [ 0.829883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.829886] ACPI: Power Button [PWRF] [ 0.830086] GHES: HEST is not enabled! [ 0.830148] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.830153] isapnp: Scanning for PnP cards... [ 0.830155] ACPI: Battery Slot [BAT1] (battery absent) [ 0.830176] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.831716] Linux agpgart interface v0.103 [ 0.833083] brd: module loaded [ 0.833842] loop: module loaded [ 0.834185] libphy: Fixed MDIO Bus: probed [ 0.834268] tun: Universal TUN/TAP device driver, 1.6 [ 0.834269] tun: (C) 1999-2004 Max Krasnyansky [ 0.834312] PPP generic driver version 2.4.2 [ 0.834352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.834360] ehci-pci: EHCI PCI platform driver [ 0.834481] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.834487] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.834501] ehci-pci 0000:00:1a.0: debug port 2 [ 0.838394] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.838411] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000 [ 0.849242] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.849281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.849283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.849285] usb usb1: Product: EHCI Host Controller [ 0.849287] usb usb1: Manufacturer: Linux 3.13.0-34-generic ehci_hcd [ 0.849288] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.849417] hub 1-0:1.0: USB hub found [ 0.849424] hub 1-0:1.0: 2 ports detected [ 0.849636] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.849641] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.849653] ehci-pci 0000:00:1d.0: debug port 2 [ 0.853551] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.853566] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000 [ 0.865238] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.865271] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.865272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.865274] usb usb2: Product: EHCI Host Controller [ 0.865276] usb usb2: Manufacturer: Linux 3.13.0-34-generic ehci_hcd [ 0.865277] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.865376] hub 2-0:1.0: USB hub found [ 0.865381] hub 2-0:1.0: 2 ports detected [ 0.865488] ehci-platform: EHCI generic platform driver [ 0.865497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.865498] ohci-pci: OHCI PCI platform driver [ 0.865506] ohci-platform: OHCI generic platform driver [ 0.865512] uhci_hcd: USB Universal Host Controller Interface driver [ 0.865631] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.865635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.865729] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.865751] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X [ 0.865814] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.865815] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.865817] usb usb3: Product: xHCI Host Controller [ 0.865819] usb usb3: Manufacturer: Linux 3.13.0-34-generic xhci_hcd [ 0.865820] usb usb3: SerialNumber: 0000:00:14.0 [ 0.865924] hub 3-0:1.0: USB hub found [ 0.865934] hub 3-0:1.0: 4 ports detected [ 0.866275] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.866279] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.866315] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.866317] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.866319] usb usb4: Product: xHCI Host Controller [ 0.866320] usb usb4: Manufacturer: Linux 3.13.0-34-generic xhci_hcd [ 0.866322] usb usb4: SerialNumber: 0000:00:14.0 [ 0.866415] hub 4-0:1.0: USB hub found [ 0.866424] hub 4-0:1.0: 4 ports detected [ 1.140459] isapnp: No Plug & Play device found [ 1.161115] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.161145] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.163551] i8042: Detected active multiplexing controller, rev 1.1 [ 1.165449] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.165454] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.165477] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.165493] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.165509] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.165678] mousedev: PS/2 mouse device common for all mice [ 1.165901] rtc_cmos 00:05: RTC can wake from S4 [ 1.166019] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.166048] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.166112] device-mapper: uevent: version 1.0.3 [ 1.166165] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.166182] platform eisa.0: Probing EISA bus 0 [ 1.166184] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.166186] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.166188] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.166190] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.166191] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.166193] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.166195] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.166196] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.166198] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.166200] platform eisa.0: EISA: Detected 0 cards [ 1.166204] cpufreq-nforce2: No nForce2 chipset. [ 1.166208] ledtrig-cpu: registered to indicate activity on CPUs [ 1.166320] TCP: cubic registered [ 1.166404] NET: Registered protocol family 10 [ 1.166577] NET: Registered protocol family 17 [ 1.166587] Key type dns_resolver registered [ 1.166800] Using IPI No-Shortcut mode [ 1.166990] Loading compiled-in X.509 certificates [ 1.170496] Loaded X.509 cert 'Magrathea: Glacier signing key: 1b7c0f16168c4b25c3a05a6a43091c8506e373df' [ 1.170506] registered taskstats version 1 [ 1.172989] Key type trusted registered [ 1.175093] Key type encrypted registered [ 1.176866] AppArmor: AppArmor sha1 policy hashing enabled [ 1.176869] IMA: No TPM chip found, activating TPM-bypass! [ 1.177208] regulator-dummy: disabling [ 1.177257] Magic number: 10:824:885 [ 1.177333] rtc_cmos 00:05: setting system clock to 2014-08-16 12:51:47 UTC (1408193507) [ 1.178031] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.178032] EDD information not available. [ 1.178078] PM: Hibernation image not present or could not be loaded. [ 1.178290] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000) [ 1.178336] Write protecting the kernel text: 6532k [ 1.178414] Write protecting the kernel read-only data: 2764k [ 1.178415] NX-protecting the kernel data: 5756k [ 1.182247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.190391] systemd-udevd[107]: starting version 204 [ 1.228755] ahci 0000:00:1f.2: version 3.0 [ 1.228938] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.228979] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.245086] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode [ 1.245093] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.254905] atl1c 0000:03:00.0: version 1.0.1.1-NAPI [ 1.261625] scsi0 : ahci [ 1.261773] scsi1 : ahci [ 1.261914] scsi2 : ahci [ 1.262051] scsi3 : ahci [ 1.262168] scsi4 : ahci [ 1.262304] scsi5 : ahci [ 1.262364] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 41 [ 1.262366] ata2: DUMMY [ 1.262368] ata3: DUMMY [ 1.262371] ata4: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617280 irq 41 [ 1.262374] ata5: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617300 irq 41 [ 1.262375] ata6: DUMMY [ 1.293647] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.293651] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.294035] hub 1-1:1.0: USB hub found [ 1.294134] hub 1-1:1.0: 6 ports detected [ 1.405132] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.537510] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.537521] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.537926] hub 2-1:1.0: USB hub found [ 1.537970] hub 2-1:1.0: 6 ports detected [ 1.580978] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.608097] ata1.00: ATA-8: TOSHIBA MK6475GSX, GT001M, max UDMA/100 [ 1.608102] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.608969] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.609030] ata1.00: configured for UDMA/100 [ 1.609285] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6475GS GT00 PQ: 0 ANSI: 5 [ 1.609487] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.609493] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.609529] sd 0:0:0:0: [sda] Write Protect is off [ 1.609532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.609552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.648882] tsc: Refined TSC clocksource calibration: 2294.787 MHz [ 1.681279] sda: sda1 sda2 < sda5 sda6 > [ 1.681904] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.832055] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b303 [ 1.832066] usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 1.832073] usb 1-1.4: Product: TOSHIBA Web Camera [ 1.832095] usb 1-1.4: Manufacturer: Alcor Micro, Corp. [ 1.928792] ata4: SATA link down (SStatus 0 SControl 300) [ 1.981503] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762 [ 1.981520] psmouse serio2: synaptics: Toshiba Satellite C845 detected, limiting rate to 40pps. [ 2.016064] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9 [ 2.248638] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.252661] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO03, max UDMA/100 [ 2.255634] ata5.00: configured for UDMA/100 [ 2.261770] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB TO03 PQ: 0 ANSI: 5 [ 2.265819] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.265830] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.266035] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.266124] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.648410] Switched to clocksource tsc [ 2.666079] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.299567] random: init urandom read with 109 bits of entropy available [ 3.592035] random: nonblocking pool is initialized [ 3.774011] init: plymouth-upstart-bridge main process (176) terminated with status 1 [ 3.774024] init: plymouth-upstart-bridge main process ended, respawning [ 3.776062] init: plymouth-upstart-bridge main process (188) terminated with status 1 [ 3.776078] init: plymouth-upstart-bridge main process ended, respawning [ 3.778028] init: plymouth-upstart-bridge main process (190) terminated with status 1 [ 3.778038] init: plymouth-upstart-bridge main process ended, respawning [ 3.779941] init: plymouth-upstart-bridge main process (191) terminated with status 1 [ 3.779957] init: plymouth-upstart-bridge main process ended, respawning [ 3.781578] init: plymouth-upstart-bridge main process (193) terminated with status 1 [ 3.781591] init: plymouth-upstart-bridge main process ended, respawning [ 3.783492] init: plymouth-upstart-bridge main process (194) terminated with status 1 [ 3.783507] init: plymouth-upstart-bridge main process ended, respawning [ 3.785419] init: plymouth-upstart-bridge main process (196) terminated with status 1 [ 3.785430] init: plymouth-upstart-bridge main process ended, respawning [ 3.787371] init: plymouth-upstart-bridge main process (197) terminated with status 1 [ 3.787387] init: plymouth-upstart-bridge main process ended, respawning [ 3.789071] init: plymouth-upstart-bridge main process (199) terminated with status 1 [ 3.789085] init: plymouth-upstart-bridge main process ended, respawning [ 3.790883] init: plymouth-upstart-bridge main process (200) terminated with status 1 [ 3.790894] init: plymouth-upstart-bridge main process ended, respawning [ 3.792565] init: plymouth-upstart-bridge main process (202) terminated with status 1 [ 3.792576] init: plymouth-upstart-bridge respawning too fast, stopped [ 10.508383] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k FS [ 10.559283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.642756] systemd-udevd[311]: starting version 204 [ 10.708085] lp: driver loaded but no devices found [ 10.715786] ppdev: user-space parallel port driver [ 10.772569] [drm] Initialized drm 1.1.0 20060810 [ 10.784575] wmi: Mapper loaded [ 10.796978] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 10.797046] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 10.813038] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 10.813152] input: Toshiba input device as /devices/virtual/input/input12 [ 10.820354] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X [ 10.834455] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 10.834464] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.834469] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 10.834474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.834476] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 10.834480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.834482] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.855563] cfg80211: Calling CRDA to update world regulatory domain [ 10.860235] [drm] Memory usable by graphics device = 2048M [ 10.860304] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 10.860307] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 10.860405] Console: switching to colour dummy device 80x25 [ 10.920559] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 10.920575] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.920577] [drm] Driver supports precise vblank timestamp query. [ 10.920650] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.975164] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin [ 11.001175] type=1400 audit(1408211517.326:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=406 comm="apparmor_parser" [ 11.001184] type=1400 audit(1408211517.326:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser" [ 11.001191] type=1400 audit(1408211517.326:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser" [ 11.001869] type=1400 audit(1408211517.326:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser" [ 11.001877] type=1400 audit(1408211517.326:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser" [ 11.002237] type=1400 audit(1408211517.326:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser" [ 11.011665] type=1400 audit(1408211517.334:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=409 comm="apparmor_parser" [ 11.011674] type=1400 audit(1408211517.334:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=409 comm="apparmor_parser" [ 11.011679] type=1400 audit(1408211517.334:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=409 comm="apparmor_parser" [ 11.014983] type=1400 audit(1408211517.338:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=411 comm="apparmor_parser" [ 11.031895] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 11.031899] [drm] This can cause pipe underruns and display issues. [ 11.031901] [drm] Please upgrade your BIOS to fix this. [ 11.044280] usb 1-1.3: new full-speed USB device number 4 using ehci-pci [ 11.049905] fbcon: inteldrmfb (fb0) is primary device [ 11.072234] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 11.072491] rtlwifi: wireless switch is on [ 11.138365] usb 1-1.3: New USB device found, idVendor=0930, idProduct=021d [ 11.138369] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.138373] usb 1-1.3: Product: RT Bluetooth Radio [ 11.138376] usb 1-1.3: Manufacturer: Realtek [ 11.138379] usb 1-1.3: SerialNumber: 00e04c000001 [ 11.178732] Bluetooth: Core ver 2.17 [ 11.178754] NET: Registered protocol family 31 [ 11.178755] Bluetooth: HCI device and connection manager initialized [ 11.178761] Bluetooth: HCI socket layer initialized [ 11.178763] Bluetooth: L2CAP socket layer initialized [ 11.178769] Bluetooth: SCO socket layer initialized [ 11.183805] usbcore: registered new interface driver btusb [ 11.240610] cfg80211: World regulatory domain updated: [ 11.240611] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.240613] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.240614] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.240614] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.240615] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.240616] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.388969] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.667771] Linux video capture interface: v2.00 [ 11.686334] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera (04f2:b303) [ 11.689489] input: TOSHIBA Web Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13 [ 11.689644] usbcore: registered new interface driver uvcvideo [ 11.689644] USB Video Class driver (1.1.1) [ 11.867748] Console: switching to colour frame buffer device 170x48 [ 11.871486] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.871488] i915 0000:00:02.0: registered panic notifier [ 11.892398] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.892866] acpi device:42: registered as cooling_device5 [ 11.892953] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14 [ 11.893055] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.893282] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 11.913726] hda_codec: CX20590: BIOS auto-probing. [ 11.914172] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 11.914176] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.914179] hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ 11.914181] mono: mono_out=0x0 [ 11.914182] inputs: [ 11.914185] Internal Mic=0x23 [ 11.914187] Mic=0x1a [ 11.915058] hda_codec: Enable sync_write for stable communication [ 11.925498] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 11.925602] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 11.925704] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 12.096100] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 12.799533] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 13.138873] init: failsafe main process (682) killed by TERM signal [ 13.508131] Bluetooth: RFCOMM TTY layer initialized [ 13.508140] Bluetooth: RFCOMM socket layer initialized [ 13.508145] Bluetooth: RFCOMM ver 1.11 [ 13.635755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.635760] Bluetooth: BNEP filters: protocol multicast [ 13.635769] Bluetooth: BNEP socket layer initialized [ 14.127812] init: cups main process (760) killed by HUP signal [ 14.127824] init: cups main process ended, respawning [ 15.237552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.241683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.256089] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X [ 15.272137] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.278285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.351072] init: samba-ad-dc main process (861) terminated with status 1 [ 16.313352] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 16.317726] vboxdrv: Found 4 processor cores. [ 16.318444] vboxdrv: fAsync=0 offMin=0x190 offMax=0xe95 [ 16.318516] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.318518] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007). [ 16.531441] vboxpci: IOMMU not found (not registered) [ 16.760871] init: plymouth-stop pre-start process (1251) terminated with status 1 [ 17.565007] wlan0: authenticate with f8:1a:67:ed:9f:bc [ 17.597052] wlan0: send auth to f8:1a:67:ed:9f:bc (try 1/3) [ 17.599088] wlan0: authenticated [ 17.600651] wlan0: associate with f8:1a:67:ed:9f:bc (try 1/3) [ 17.606326] wlan0: RX AssocResp from f8:1a:67:ed:9f:bc (capab=0x431 status=0 aid=2) [ 17.606601] wlan0: associated [ 17.606609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.606851] cfg80211: Calling CRDA for country: US [ 17.609714] cfg80211: Regulatory domain changed to country: US [ 17.609717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.609720] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 17.609721] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 17.609723] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.609724] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.609726] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.609727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 17.609728] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 17.633346] wlan0: deauthenticating from f8:1a:67:ed:9f:bc by local choice (reason=2) [ 17.669914] cfg80211: Calling CRDA to update world regulatory domain [ 17.669971] wlan0: authenticate with f8:1a:67:ed:9f:bc [ 17.686151] wlan0: send auth to f8:1a:67:ed:9f:bc (try 1/3) [ 17.686275] cfg80211: World regulatory domain updated: [ 17.686278] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.686281] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.686283] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.686284] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.686286] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.686287] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.136163] wlan0: send auth to f8:1a:67:ed:9f:bc (try 2/3) [ 19.138247] wlan0: authenticated [ 19.139896] wlan0: associate with f8:1a:67:ed:9f:bc (try 1/3) [ 19.143784] wlan0: RX AssocResp from f8:1a:67:ed:9f:bc (capab=0x431 status=0 aid=2) [ 19.144060] wlan0: associated [ 19.144116] cfg80211: Calling CRDA for country: US [ 19.146617] cfg80211: Regulatory domain changed to country: US [ 19.146620] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.146622] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 19.146624] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 19.146626] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.146627] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.146629] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.146630] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 19.146632] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 43.630019] audit_printk_skb: 126 callbacks suppressed [ 43.630023] type=1400 audit(1408211549.970:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1966 comm="apparmor_parser" [ 43.630030] type=1400 audit(1408211549.970:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1966 comm="apparmor_parser" [ 43.630535] type=1400 audit(1408211549.970:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1966 comm="apparmor_parser" [ 50.232144] wlan0: Connection to AP f8:1a:67:ed:9f:bc lost [ 50.352052] cfg80211: Calling CRDA to update world regulatory domain [ 50.354865] cfg80211: World regulatory domain updated: [ 50.354869] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 50.354871] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 50.354873] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 50.354874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 50.354876] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 50.354877] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.707827] wlan0: authenticate with f8:1a:67:ed:9f:bc [ 51.736548] wlan0: send auth to f8:1a:67:ed:9f:bc (try 1/3) [ 51.738581] wlan0: authenticated [ 51.739190] wlan0: associate with f8:1a:67:ed:9f:bc (try 1/3) [ 51.743238] wlan0: RX AssocResp from f8:1a:67:ed:9f:bc (capab=0x431 status=0 aid=2) [ 51.743531] wlan0: associated [ 51.743649] cfg80211: Calling CRDA for country: US [ 51.745957] cfg80211: Regulatory domain changed to country: US [ 51.745961] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.745963] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 51.745965] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 51.745966] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.745968] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.745969] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.745970] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 51.745972] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 833.545457] traps: multiqueue0:src[2281] general protection ip:b69f9e43 sp:b30fc3d0 error:0 in libc-2.19.so[b69c8000+1a9000] [ 1115.233678] usb 3-2: new low-speed USB device number 2 using xhci_hcd [ 1115.253373] usb 3-2: New USB device found, idVendor=093a, idProduct=2510 [ 1115.253378] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1115.253380] usb 3-2: Product: USB Optical Mouse [ 1115.253382] usb 3-2: Manufacturer: PixArt [ 1115.253527] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1115.337773] hidraw: raw HID events driver (C) Jiri Kosina [ 1115.365748] usbcore: registered new interface driver usbhid [ 1115.365752] usbhid: USB HID core driver [ 1115.371974] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input18 [ 1115.372105] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0