U-Boot 2009.11 (Dec 07 2011 - 20:26:08) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 0 Card did not respond to voltage select! MMC read single failed, err=-19 ** Can't read from device 1 ** ** Unable to use mmc 1:1 for fatload ** MMC read single failed, err=-19 ** Can't read from device 1 ** ** Unable to use mmc 1:1 for fatload ** Partition info retrieved Reading /boot.scr ** Unable to read "/boot.scr" from mmc 0:2 ** Partition info retrieved Reading /uImage 4681328 bytes read Booting from eMMC ... ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4681264 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.2.0-1000-ux500 (buildd@anacardiaceae) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #8-Ubuntu SMP PREEMPT Mon Mar 5 15:26:57 UTC 2012 [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ST-Ericsson Snowball platform [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DB8500 v2.2 [0x008500b2] [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1605000 s12064 r8192 d12512 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 200192 [ 0.000000] Kernel command line: console=ttyAMA2,115200n8 vmalloc=300M root=/dev/mmcblk0p2 rootwait mem=128M@0 mali.mali_mem=64M@128M hwmem=168M@192M mem=22M@360M mem_issw=1M@383M mem=640M@384M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 128MB 22MB 640MB = 790MB total [ 0.000000] Memory: 787792k/787792k available, 21168k reserved, 446464K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe5000000 - 0xf7800000 ( 296 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe4c00000 ( 588 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08f263c (9130 kB) [ 0.000000] .init : 0xc08f3000 - 0xc0948f20 ( 344 kB) [ 0.000000] .data : 0xc094a000 - 0xc09d12f8 ( 541 kB) [ 0.000000] .bss : 0xc09d131c - 0xc0dfbb2c (4267 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:640 [ 0.000000] PRCMU firmware version 3.4.9 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.149993] Calibrating delay using timer specific routine.. 4.80 BogoMIPS (lpj=24037) [ 0.150024] pid_max: default: 32768 minimum: 301 [ 0.150268] Security Framework initialized [ 0.150360] AppArmor: AppArmor initialized [ 0.150543] Mount-cache hash table entries: 512 [ 0.151641] Initializing cgroup subsys cpuacct [ 0.151763] CPU: Testing write buffer coherency: ok [ 0.151824] ftrace: allocating 24539 entries in 73 pages [ 0.174499] CPU0: thread -1, cpu 0, socket 3, mpidr 80000300 [ 0.174682] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.174774] L310 cache controller enabled [ 0.174774] l2x0: 8 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x7e060800, Cache size: 524288 B [ 0.275207] CPU1: Booted secondary processor [ 0.275238] CPU1: thread -1, cpu 1, socket 3, mpidr 80000301 [ 0.275299] Brought up 2 CPUs [ 0.275299] SMP: Total of 2 processors activated (9.61 BogoMIPS). [ 0.276000] devtmpfs: initialized [ 0.281372] print_constraints: dummy: [ 0.281768] NET: Registered protocol family 16 [ 0.284912] gpio gpio.0: Bits 0-31 at address f812e000 [ 0.285430] gpio gpio.1: Bits 32-63 at address f812e080 [ 0.286041] gpio gpio.2: Bits 64-95 at address f800e000 [ 0.286437] gpio gpio.3: Bits 96-127 at address f800e080 [ 0.287048] gpio gpio.4: Bits 128-159 at address f800e100 [ 0.287536] gpio gpio.5: Bits 160-191 at address f800e180 [ 0.288146] gpio gpio.6: Bits 192-223 at address f811e000 [ 0.288604] gpio gpio.7: Bits 224-255 at address f811e080 [ 0.289093] gpio gpio.8: Bits 256-287 at address fa3fe000 [ 0.294769] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.294799] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.296844] stm stm: STM-Trace driver probed successfully [ 0.297607] print_constraints: db8500-vape: [ 0.297882] print_constraints: db8500-varm: [ 0.298126] print_constraints: db8500-vmodem: [ 0.298339] print_constraints: db8500-vpll: [ 0.298583] print_constraints: db8500-vsmps1: [ 0.298797] print_constraints: db8500-vsmps2: [ 0.299041] print_constraints: db8500-vsmps3: [ 0.299255] print_constraints: db8500-vrf1: [ 0.299499] print_constraints: db8500-sva-mmdsp: [ 0.299530] set_supply: db8500-sva-mmdsp: supplied by db8500-vape [ 0.299804] print_constraints: db8500-sva-mmdsp-ret: [ 0.300048] print_constraints: db8500-sva-pipe: [ 0.300079] set_supply: db8500-sva-pipe: supplied by db8500-vape [ 0.300323] print_constraints: db8500-sia-mmdsp: [ 0.300354] set_supply: db8500-sia-mmdsp: supplied by db8500-vape [ 0.300628] print_constraints: db8500-sia-mmdsp-ret: [ 0.300842] print_constraints: db8500-sia-pipe: [ 0.300872] set_supply: db8500-sia-pipe: supplied by db8500-vape [ 0.301177] print_constraints: db8500-sga: [ 0.301177] set_supply: db8500-sga: supplied by db8500-vape [ 0.301452] print_constraints: db8500-b2r2-mcde: [ 0.301483] set_supply: db8500-b2r2-mcde: supplied by db8500-vape [ 0.301757] print_constraints: db8500-esram12: [ 0.301788] set_supply: db8500-esram12: supplied by db8500-vape [ 0.302062] print_constraints: db8500-esram12-ret: [ 0.302307] print_constraints: db8500-esram34: [ 0.302307] set_supply: db8500-esram34: supplied by db8500-vape [ 0.302612] print_constraints: db8500-esram34-ret: [ 0.302886] DB8500 PRCMU initialized [ 0.303192] ab8500-i2c ab8500-i2c.0: detected chip, revision: 0x30 [ 0.303253] ab8500-i2c ab8500-i2c.0: switch off status: 0x0 [ 0.336578] bio: create slab at 0 [ 0.337463] dma40 dma40.0: managed by runtime pm: regulator [ 0.337554] dma40 dma40.0: hardware revision: 3 @ 0x801c0000 [ 0.337615] dma40 dma40.0: 6 of 8 physical DMA channels available [ 0.337615] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigured (0) [ 0.337646] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigured (0) [ 0.337646] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigured (0) [ 0.348602] dma40 dma40.0: initialized [ 0.349304] print_constraints: EN-3V3: 3300 mV [ 0.349792] print_constraints: WLAN-VBAT: 3600 mV [ 0.351867] print_constraints: ab8500-ext-supply3: 3400 mV [ 0.352203] print_constraints: V-DISPLAY: 2800 <--> 3300 mV at 2800 mV [ 0.352264] set_supply: V-DISPLAY: supplied by ab8500-ext-supply3 [ 0.352600] print_constraints: V-eMMC1: 1100 <--> 3300 mV at 2900 mV normal idle [ 0.352630] set_supply: V-eMMC1: supplied by ab8500-ext-supply3 [ 0.352966] print_constraints: V-MMC-SD: 1200 <--> 2910 mV at 2910 mV normal idle [ 0.352996] set_supply: V-MMC-SD: supplied by ab8500-ext-supply3 [ 0.353302] print_constraints: V-INTCORE: 1250 <--> 1350 mV at 1250 mV normal idle [ 0.353607] print_constraints: V-TVOUT: 2000 mV [ 0.353881] print_constraints: LDO-USB: 3300 mV [ 0.354125] print_constraints: V-AUD: 2000 mV [ 0.354370] print_constraints: V-AMIC1: 2050 mV [ 0.354644] print_constraints: V-AMIC2: 2050 mV [ 0.354888] print_constraints: V-DMIC: 1800 mV [ 0.355194] print_constraints: V-CSI-DSI: 1200 mV [ 0.355468] print_constraints: V-SYSCLKREQ-2: 0 mV [ 0.355712] print_constraints: V-SYSCLKREQ-4: 0 mV [ 0.357543] Serial: AMBA PL011 UART driver [ 0.357727] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a PL011 rev3 [ 0.375152] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a PL011 rev3 [ 0.405151] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a PL011 rev3 [ 1.095092] console [ttyAMA2] enabled [ 1.127136] hwmem hwmem.0: Probed OK [ 1.133239] SCSI subsystem initialized [ 1.137054] ssp-pl022 ssp0: managed by runtime pm: regulator [ 1.142852] ssp-pl022 ssp0: ARM PL022 driver, device ID: 0x01080022 [ 1.149139] pl022: mapped registers from 0x80002000 to e5040000 [ 1.155059] ssp-pl022 ssp0: Unbalanced pm_runtime_enable! [ 1.160552] ssp-pl022 ssp0: setup for DMA on RX dma0chan0, TX dma0chan1 [ 1.167510] ssp-pl022 ssp0: runtime pm suspend before resume [ 1.174041] usbcore: registered new interface driver usbfs [ 1.179687] usbcore: registered new interface driver hub [ 1.185180] usbcore: registered new device driver usb [ 1.190795] ab8500-usb ab8500-usb.0: managed by runtime pm: pins [ 1.197723] ab8500-usb ab8500-usb.0: revision 0x30 driver initialized [ 1.204162] prcmu qos: get cpufreq policy failed (cpu0) [ 1.209411] prcmu qos: get cpufreq policy failed (cpu1) [ 1.215820] nmk-i2c nmk-i2c.0: managed by runtime pm: pins [ 1.221527] nmk-i2c nmk-i2c.0: initialize Nomadik I2C0 at 80004000 on virtual base e5042000 [ 1.230316] nmk-i2c nmk-i2c.1: managed by runtime pm: pins [ 1.235992] nmk-i2c nmk-i2c.1: initialize Nomadik I2C1 at 80122000 on virtual base e5044000 [ 1.244567] nmk-i2c nmk-i2c.2: managed by runtime pm: pins [ 1.250274] nmk-i2c nmk-i2c.2: initialize Nomadik I2C2 at 80128000 on virtual base e5046000 [ 1.258666] power state: unbalanced enable/disable calls [ 1.264190] nmk-i2c nmk-i2c.3: managed by runtime pm: pins [ 1.269866] nmk-i2c nmk-i2c.3: initialize Nomadik I2C3 at 80110000 on virtual base e5048000 [ 1.279785] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.287139] Bluetooth: Core ver 2.16 [ 1.290863] NET: Registered protocol family 31 [ 1.295318] Bluetooth: HCI device and connection manager initialized [ 1.301666] Bluetooth: HCI socket layer initialized [ 1.306549] Bluetooth: L2CAP socket layer initialized [ 1.311614] Bluetooth: SCO socket layer initialized [ 1.316955] cfg80211: Calling CRDA to update world regulatory domain [ 1.323486] NetLabel: Initializing [ 1.326904] NetLabel: domain hash size = 128 [ 1.331268] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.336242] NetLabel: unlabeled traffic allowed by default [ 1.366607] ab8500-btemp ab8500-btemp.0: Battery identified as unknown, resistance 258823 Ohm [ 1.375122] ab8500-btemp ab8500-btemp.0: failed to identify the battery [ 1.393798] Switching to clocksource dbx500-prcmu-timer [ 1.413208] AppArmor: AppArmor Filesystem Enabled [ 1.417938] MCDE subsystem init begin [ 1.421783] mcde mcde: MCDE iomap: 0xA0350000->0xE504A000 [ 1.427185] mcde mcde: MCDE DSI0 iomap: 0xA0351000->0xE504C000 [ 1.433044] mcde mcde: MCDE DSI1 iomap: 0xA0352000->0xE504E000 [ 1.438873] mcde mcde: MCDE DSI2 iomap: 0xA0353000->0xE5050000 [ 1.444915] mcde mcde: Probe HW [ 1.448120] mcde mcde: MCDE HW revision 3.0.8.0 [ 1.452728] mcde mcde: V2 HW [ 1.457061] MCDE subsystem init done [ 1.477569] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 1.484344] musb-hdrc musb-hdrc: USB OTG mode controller at e5060000 using DMA, IRQ 55 [ 1.492675] NET: Registered protocol family 2 [ 1.497283] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 1.505157] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.513153] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 1.520660] TCP: Hash tables configured (established 65536 bind 65536) [ 1.527160] TCP reno registered [ 1.530334] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.536163] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.542724] NET: Registered protocol family 1 [ 1.547332] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.555908] ux500-product: JTAG is enabled [ 1.562194] audit: initializing netlink socket (disabled) [ 1.567626] type=2000 audit(0.870:1): initialized [ 1.584716] highmem bounce pool size: 64 pages [ 1.589569] VFS: Disk quotas dquot_6.5.2 [ 1.593719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.601043] Installing v9fs 9p2000 file system support [ 1.606231] msgmni has been set to 666 [ 1.610839] io scheduler noop registered [ 1.614776] io scheduler deadline registered (default) [ 1.619995] io scheduler cfq registered [ 1.623901] mcde_display_generic_init [ 1.627960] mcde_display_sony_acx424akp_init [ 1.638092] av8100 0-0070: chip version:2 [ 1.704406] i2c-core: driver [av8100] using legacy suspend method [ 1.710510] i2c-core: driver [av8100] using legacy resume method [ 1.716522] b2r2_init [ 1.721557] B2R2_MEM: Creating heap for size 16384 bytes [ 1.727996] uart-pl011 uart0: no DMA platform data [ 1.732818] uart-pl011 uart1: no DMA platform data [ 1.737609] uart-pl011 uart2: no DMA platform data [ 1.742828] [drm] Initialized drm 1.1.0 20060810 [ 1.748443] Mali<2>: [ 1.750732] Mali<2>: Inserting Mali v8 device driver. [ 1.755859] Mali<2>: Compiled: Mar 5 2012, time: 17:00:11. [ 1.761444] Mali<2>: Svn revision: [ 1.764923] Mali<2>: MMU memory system initializing [ 1.769836] Mali<2>: Rendercore: subsystem global mutex initialized [ 1.776092] Mali<2>: Core: subsystem_init: Mali-400 PP [ 1.781249] Mali<2>: Core: subsystem_init: Mali-400 GP [ 1.786376] Mali<2>: Mali L2 cache system initializing [ 1.791534] Mali<1>: Overriding arch resource[4] : [ 1.796325] Mali<1>: Type: MEMORY, base: 8000000, size 4000000 [ 1.802246] create_regulator: db8500-sga: Failed to create debugfs directory [ 1.809570] Mali<2>: MMU registered [ 1.813049] Mali<2>: MMU registered [ 1.816558] Mali<2>: Mali OS memory allocator created with max allocation size of 0x8000000 bytes, cpu_usage_adjust 0x00000000 [ 1.827972] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x00000000, size==0x7FF00000, cpu_adjust==0x00000000 [ 1.841125] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache [ 1.846954] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) : [ 1.856964] Mali<1>: 0: Mali SDRAM [ 1.860473] Mali<1>: 5: Linux kernel memory [ 1.865692] Mali<2>: Attach mmu: 0xe4424e60 to core: Mali-400 PP in subsystem: Mali-400 PP [ 1.873962] Mali<2>: Attach mmu: 0xe4424ec0 to core: Mali-400 GP in subsystem: Mali-400 GP [ 1.882232] Mali<2>: Mali L2 cache system load complete [ 1.887481] Mali: Mali device driver loaded [ 1.902404] brd: module loaded [ 1.911254] loop: module loaded [ 1.914611] dispdev_init [ 1.917816] create_regulator: db8500-vape: Failed to create debugfs directory [ 1.925415] create_regulator: db8500-vape: Failed to create debugfs directory [ 1.932983] create_regulator: db8500-vape: Failed to create debugfs directory [ 1.952728] tun: Universal TUN/TAP device driver, 1.6 [ 1.957763] tun: (C) 1999-2004 Max Krasnyansky [ 1.964477] smsc911x: Driver version 2008-10-21 [ 1.969085] smsc911x smsc911x.0: (unregistered net_device): smsc911x_request_resources: Failed to get regulator 'vddvario' [ 2.009704] smsc911x-mdio: probed [ 2.013153] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01, irq=-1) [ 2.022949] smsc911x smsc911x.0: eth0: MAC Address: 2e:46:4b:5b:75:ef [ 2.029693] PPP generic driver version 2.4.2 [ 2.034912] PPP MPPE Compression module registered [ 2.040374] usbcore: registered new interface driver cdc_acm [ 2.046020] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.054046] Initializing USB Mass Storage driver... [ 2.059112] usbcore: registered new interface driver usb-storage [ 2.065124] USB Mass Storage support registered. [ 2.069946] usbcore: registered new interface driver libusual [ 2.076599] cyttsp_spi_init: Cypress TrueTouch(R) Standard Product SPI Touchscreen Driver (Built Mar 5 2012 @ 17:07:50) returned 0 [ 2.088836] input: AB8500 Hs Button as /devices/platform/ab8500-i2c.0/ab8500-acc-det.0/input/input0 [ 2.098999] input: AB8500 POn(PowerOn) Key as /devices/platform/ab8500-i2c.0/ab8500-poweron-key.0/input/input1 [ 2.109771] lps001wp_prs_sysfs: probe start. [ 2.115875] lps001wp_prs_sysfs 2-005c: lps001wp_prs_sysfs: probed [ 2.124481] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0 [ 2.131866] i2c /dev entries driver [ 2.137298] lirc_dev: IR Remote Control driver registered, major 250 [ 2.143768] IR NEC protocol handler initialized [ 2.148315] IR RC5(x) protocol handler initialized [ 2.153106] IR RC6 protocol handler initialized [ 2.157653] IR JVC protocol handler initialized [ 2.162170] IR Sony protocol handler initialized [ 2.166809] IR RC5 (streamzap) protocol handler initialized [ 2.172393] IR MCE Keyboard/mouse protocol handler initialized [ 2.178222] IR LIRC bridge handler initialized [ 2.182678] Linux video capture interface: v2.00 [ 2.190093] regulator_check_drms: V-DISPLAY: operation not allowed [ 2.196655] lsm303dlh_m lsm303dlh.1: Magnetometer, ID : 48:34:33 [ 2.203033] regulator_check_drms: V-DISPLAY: operation not allowed [ 2.209564] lsm303dlhc_a lsm303dlh.0: 3-Axis Accelerometer, ID : 51 [ 2.216491] l3g4200d l3g4200d: 3-Axis Gyroscope device identification: 211 [ 2.224060] u8500_wdt u8500_wdt: initialized [ 2.228637] device-mapper: uevent: version 1.0.3 [ 2.233642] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.242187] Bluetooth: HCI UART driver ver 2.2 [ 2.246673] dbx500-cpufreq : Available frequencies: [ 2.251586] 200 Mhz [ 2.253845] 400 Mhz [ 2.256103] 800 Mhz [ 2.258361] 1000 Mhz [ 2.261108] cpuidle: using governor ladder [ 2.265197] cpuidle: using governor menu [ 2.269317] mmci-pl18x sdi4: managed by runtime pm: pins [ 2.274993] mmci-pl18x sdi4: Provided ocr_mask/setpower will not be used (using regulator instead) [ 2.284027] mmci-pl18x sdi4: Unbalanced pm_runtime_enable! [ 2.289550] mmci-pl18x sdi4: mmc0: PL180 manf 80 rev4 at 0x80114000 irq 131,-1 (pio) [ 2.297302] mmci-pl18x sdi4: no DMA platform data [ 2.303314] mmci-pl18x sdi0: managed by runtime pm: pins [ 2.308929] mmci-pl18x sdi0: Provided ocr_mask/setpower will not be used (using regulator instead) [ 2.318023] mmci-pl18x sdi0: Unbalanced pm_runtime_enable! [ 2.323577] mmci-pl18x sdi0: mmc1: PL180 manf 80 rev4 at 0x80126000 irq 92,-1 (pio) [ 2.331268] mmci-pl18x sdi0: no DMA platform data [ 2.337249] mmci-pl18x sdi1: managed by runtime pm: pins [ 2.342834] mmci-pl18x sdi1: Unbalanced pm_runtime_enable! [ 2.348327] mmci-pl18x sdi1: mmc2: PL180 manf 80 rev4 at 0x80118000 irq 82,-1 (pio) [ 2.356018] mmci-pl18x sdi1: no DMA platform data [ 2.364227] hash1 hash1: managed by runtime pm: regulator [ 2.370147] hash1 hash1: [ux500_hash_probe] successfully probed [ 2.376861] usbcore: registered new interface driver usbhid [ 2.382507] usbhid: USB HID core driver [ 2.390075] platform cg2900.0: CG2900 initialized [ 2.395111] cg2900 cg2900.0: CG2900 Core driver started [ 2.401031] cg2900-test cg2900-test.0: CG2900 test char device driver started [ 2.408386] cg2900-chip cg2900-chip.0: CG2900 chip driver started [ 2.414733] stlc2690-chip stlc2690-chip.0: STLC2690 chip driver started [ 2.422729] Bluetooth: HCI UART driver ver 2.3 [ 2.427368] mmio_init [ 2.430267] adp1653 2-0030: adp1653_probe: No platform data supplied. [ 2.436737] adp1653: probe of 2-0030 failed with error -22 [ 2.438262] mmc0: new high speed MMC card at address 0001 [ 2.447998] camera_flash driver initialized with minor=57 [ 2.448028] mmcblk0: mmc0:0001 3.53 GiB [ 2.448242] mmcblk0boot0: mmc0:0001 partition 1 2.00 MiB [ 2.448455] mmcblk0boot1: mmc0:0001 partition 2 2.00 MiB [ 2.469787] mmcblk0: p1 p2 p3 [ 2.482330] mmcblk0boot1: unknown partition table [ 2.494659] mmcblk0boot0: unknown partition table [ 2.551086] Initialize NMF 2.10.118 Component Manager...... [ 2.556671] [ CM Linux Driver 2.10.117 ] [ 2.562042] usbcore: registered new interface driver snd-usb-audio [ 2.569000] ab5500_init called. [ 2.572387] ab8500_codec_platform_driver_init: Enter. [ 2.577514] ab8500_codec_driver_probe: Register codec. [ 2.583435] ux500_msp_drv_probe: Enter (idx: 0, dev-name: i2s.0, drv-name: i2s). [ 2.590911] ux500_msp_drv_probe: Enter (idx: 1, dev-name: i2s.1, drv-name: i2s). [ 2.598297] ux500_msp_drv_probe: Enter (idx: 2, dev-name: i2s.2, drv-name: i2s). [ 2.605743] ux500_msp_drv_probe: Enter (idx: 3, dev-name: i2s.3, drv-name: i2s). [ 2.613616] av8100_codec_drv_probe: Init codec private data.. [ 2.619354] av8100_codec_drv_probe: Register codec. [ 2.624511] cg29xx_codec_driver_probe: Init codec private data.. [ 2.630523] cg29xx_codec_driver_probe: Register codec. [ 2.636077] ux500_pcm_drv_probe: Register ux500-pcm SoC platform driver. [ 2.650146] ab8500-codec ab8500-codec.0: ASoC: Failed to create AD_OUT4 debugfs file [ 2.659637] asoc: av8100-codec-dai <-> i2s.2 mapping ok [ 2.665161] asoc: ab8500-codec-dai.0 <-> i2s.1 mapping ok [ 2.670867] asoc: ab8500-codec-dai.1 <-> i2s.3 mapping ok [ 2.676452] asoc: cg29xx-codec-dai.1 <-> i2s.0 mapping ok [ 2.683654] input: U8500-card AB8500 Hs Status as /devices/platform/soc-audio/sound/card0/input2 [ 2.693481] ALSA device list: [ 2.696441] #0: U8500-card [ 2.699493] Netfilter messages via NETLINK v0.30. [ 2.704437] nf_conntrack version 0.5.0 (12309 buckets, 49236 max) [ 2.710937] ctnetlink v0.93: registering with nfnetlink. [ 2.717651] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.723175] TCP cubic registered [ 2.726531] NET: Registered protocol family 10 [ 2.733398] NET: Registered protocol family 17 [ 2.737854] NET: Registered protocol family 15 [ 2.742492] Bluetooth: RFCOMM TTY layer initialized [ 2.747375] Bluetooth: RFCOMM socket layer initialized [ 2.752563] Bluetooth: RFCOMM ver 1.11 [ 2.756347] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.761657] Bluetooth: BNEP filters: protocol multicast [ 2.766876] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.773101] NET: Registered protocol family 35 [ 2.777709] Installing 9P2000 support [ 2.781555] NET: Registered protocol family 37 [ 2.786010] Registering the dns_resolver key type [ 2.790863] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 2.798583] Registering SWP/SWPB emulation handler [ 2.804016] ux500: performance: Fail to schedudle mmc work [ 2.809967] l2x0-prefetch: initialized. [ 2.814971] mcde_display_hdmi_init [ 2.818511] av8100_hdmi av8100_hdmi.3: HDMI display probed [ 2.825286] regulator_init_complete: db8500-esram34: disabling [ 2.831237] regulator_init_complete: db8500-esram12: disabling [ 2.837921] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 2.845031] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 2.852539] input: gpio-keys as /devices/platform/gpio-keys/input/input3 [ 2.860443] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-01 00:41:05 UTC (946687265) [ 3.163391] VFS: Mounted root (vfat filesystem) on device 179:2. [ 3.169555] devtmpfs: error mounting -2 [ 3.174560] Freeing init memory: 340K [ 3.178619] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 3.191314] [] (unwind_backtrace+0x0/0x144) from [] (dump_stack+0x20/0x24) [ 3.200073] [] (dump_stack+0x20/0x24) from [] (panic+0x84/0x1b4) [ 3.207916] [] (panic+0x84/0x1b4) from [] (init_post+0xb4/0xd8) [ 3.215698] [] (init_post+0xb4/0xd8) from [] (kernel_init+0x114/0x144) [ 3.224121] CPU 0 will stop doing anything useful since another CPU has crashed [ 3.231964] Loading crashdump kernel... [ 3.235809] Software reset on panic!