[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-1-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-1ubuntu2) ) #3-Ubuntu SMP Tue Oct 29 18:41:32 UTC 2013 (Ubuntu 3.12.0-1.3-generic 3.12.0-rc7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-1-generic root=UUID=c20d236a-1afa-4f57-ab2b-af0e19e7c083 ro persistent quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff87fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff88000-0x00000000cffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-M/USB3, BIOS 1501 08/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff] [ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff] [ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff6ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff6ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35c5c000-0x36e25fff] [ 0.000000] ACPI: RSDP 00000000000fb570 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 080912 XSDT1645 20120809 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 080912 FACP1645 20120809 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff70450 0E36E (v01 A1642 A1642001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff88000 00040 [ 0.000000] ACPI: APIC 00000000cff70390 0007C (v01 080912 APIC1645 20120809 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff70410 0003C (v01 080912 OEMMCFG 20120809 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff88040 00072 (v01 080912 OEMB1645 20120809 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff7f8a0 000C8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff7f970 00038 (v01 080912 OEMHPET 20120809 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff7f9b0 00458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff] [ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xcff6ffff] [ 0.000000] node 0: [mem 0x100000000-0x21fffffff] [ 0.000000] On node 0 totalpages: 2031373 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13246 pages used for memmap [ 0.000000] DMA32 zone: 847728 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff70000-0xcff87fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff88000-0xcffcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xff9fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021fc00000 s86592 r8192 d24000 u262144 [ 0.000000] pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999610 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-1-generic root=UUID=c20d236a-1afa-4f57-ab2b-af0e19e7c083 ro persistent quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 7831436K/8125492K available (7295K kernel code, 1125K rwdata, 3328K rodata, 1324K init, 1416K bss, 294056K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 32505856 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3114.015 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.03 BogoMIPS (lpj=12456060) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000027] Security Framework initialized [ 0.000041] AppArmor: AppArmor initialized [ 0.000042] Yama: becoming mindful. [ 0.000512] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002424] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003277] Mount-cache hash table entries: 256 [ 0.003441] Initializing cgroup subsys memory [ 0.003468] Initializing cgroup subsys devices [ 0.003470] Initializing cgroup subsys freezer [ 0.003471] Initializing cgroup subsys blkio [ 0.003473] Initializing cgroup subsys perf_event [ 0.003475] Initializing cgroup subsys hugetlb [ 0.003491] tseg: 0000000000 [ 0.003497] CPU: Physical Processor ID: 0 [ 0.003498] CPU: Processor Core ID: 0 [ 0.003499] mce: CPU supports 6 MCE banks [ 0.003503] LVT offset 0 assigned for vector 0xf9 [ 0.003507] process: using AMD E400 aware idle routine [ 0.003508] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.003508] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.003508] tlb_flushall_shift: 4 [ 0.003585] Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000) [ 0.004232] ACPI: Core revision 20130725 [ 0.007763] ACPI: All ACPI Tables successfully acquired [ 0.111102] ftrace: allocating 28094 entries in 110 pages [ 0.121439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.161145] smpboot: CPU0: AMD Athlon(tm) II X2 255 Processor (fam: 10, model: 06, stepping: 03) [ 0.269064] Performance Events: AMD PMU driver. [ 0.269068] ... version: 0 [ 0.269069] ... bit width: 48 [ 0.269070] ... generic registers: 4 [ 0.269071] ... value mask: 0000ffffffffffff [ 0.269072] ... max period: 00007fffffffffff [ 0.269072] ... fixed-purpose events: 0 [ 0.269073] ... event mask: 000000000000000f [ 0.270396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.270472] smpboot: Booting Node 0, Processors # 1 OK [ 0.283524] Brought up 2 CPUs [ 0.283526] smpboot: Total of 2 processors activated (12456.06 BogoMIPS) [ 0.283875] process: System has AMD C1E enabled [ 0.283888] process: Switch to broadcast mode on CPU1 [ 0.284039] process: Switch to broadcast mode on CPU0 [ 0.284115] devtmpfs: initialized [ 0.287045] EVM: security.selinux [ 0.287046] EVM: security.SMACK64 [ 0.287047] EVM: security.capability [ 0.287115] PM: Registering ACPI NVS region [mem 0xcff88000-0xcffcffff] (294912 bytes) [ 0.287944] pinctrl core: initialized pinctrl subsystem [ 0.288015] regulator-dummy: no parameters [ 0.288037] RTC time: 19:46:05, date: 11/02/13 [ 0.288075] NET: Registered protocol family 16 [ 0.288172] cpuidle: using governor ladder [ 0.288173] cpuidle: using governor menu [ 0.288177] node 0 link 0: io port [1000, ffffff] [ 0.288179] TOM: 00000000d0000000 aka 3328M [ 0.288181] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.288183] node 0 link 0: mmio [a0000, bffff] [ 0.288185] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.288187] node 0 link 0: mmio [f0000000, fe6fffff] [ 0.288189] node 0 link 0: mmio [fe700000, fe8fffff] [ 0.288190] node 0 link 0: mmio [fe900000, ffdfffff] [ 0.288192] TOM2: 0000000230000000 aka 8960M [ 0.288193] bus: [bus 00-07] on node 0 link 0 [ 0.288194] bus: 00 [io 0x0000-0xffff] [ 0.288196] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.288197] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.288197] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.288199] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.288244] ACPI: bus type PCI registered [ 0.288246] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.288291] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.288292] PCI: not using MMCONFIG [ 0.288294] PCI: Using configuration type 1 for base access [ 0.288294] PCI: Using configuration type 1 for extended access [ 0.288451] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.288452] mtrr: probably your BIOS does not setup all CPUs. [ 0.288453] mtrr: corrected configuration. [ 0.289131] bio: create slab at 0 [ 0.289291] ACPI: Added _OSI(Module Device) [ 0.289293] ACPI: Added _OSI(Processor Device) [ 0.289294] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.289295] ACPI: Added _OSI(Processor Aggregator Device) [ 0.290416] ACPI: EC: Look up EC in DSDT [ 0.291652] ACPI: Executed 3 blocks of module-level executable AML code [ 0.500594] ACPI: Interpreter enabled [ 0.500607] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.500619] ACPI: (supports S0 S1 S3 S4 S5) [ 0.500620] ACPI: Using IOAPIC for interrupt routing [ 0.500640] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.502096] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.509587] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.509684] ACPI: No dock devices found. [ 0.554756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.554880] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) [ 0.554980] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted [ 0.555226] ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5) [ 0.555228] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5) [ 0.555230] PCI host bridge to bus 0000:00 [ 0.555232] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.555234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.555236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.555237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.555239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.555241] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff] [ 0.555242] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.555251] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.555335] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400 [ 0.555408] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.555437] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.555472] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.555496] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.555525] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.555558] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.555580] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.555610] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.555642] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.555673] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.555688] pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007] [ 0.555695] pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003] [ 0.555702] pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007] [ 0.555710] pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003] [ 0.555717] pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f] [ 0.555724] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff] [ 0.555739] pci 0000:00:11.0: set SATA to AHCI mode [ 0.555815] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.555826] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff] [ 0.555894] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.555921] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.555935] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff] [ 0.555996] pci 0000:00:12.2: supports D1 D2 [ 0.555997] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.556035] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.556064] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.556074] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff] [ 0.556143] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.556174] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.556188] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff] [ 0.556249] pci 0000:00:13.2: supports D1 D2 [ 0.556250] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.556284] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.556310] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.556400] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.556410] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.556417] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.556425] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.556432] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.556439] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 0.556504] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.556520] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f8000-0xfe6fbfff 64bit] [ 0.556569] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.556601] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.556622] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.556717] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.556769] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.556790] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.556800] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff] [ 0.556868] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.556893] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.556903] pci 0000:00:16.0: reg 0x10: [mem 0xfe6f7000-0xfe6f7fff] [ 0.556972] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.556998] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.557012] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff] [ 0.557073] pci 0000:00:16.2: supports D1 D2 [ 0.557075] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.557108] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.557133] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.557183] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.557229] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.557277] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.557328] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.557413] pci 0000:01:05.0: [1002:9715] type 00 class 0x030000 [ 0.557421] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.557425] pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff] [ 0.557429] pci 0000:01:05.0: reg 0x18: [mem 0xfe8f0000-0xfe8fffff] [ 0.557437] pci 0000:01:05.0: reg 0x24: [mem 0xfe700000-0xfe7fffff] [ 0.557452] pci 0000:01:05.0: supports D1 D2 [ 0.557477] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 0.557484] pci 0000:01:05.1: reg 0x10: [mem 0xfe8e8000-0xfe8ebfff] [ 0.557511] pci 0000:01:05.1: supports D1 D2 [ 0.557554] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.557557] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.557559] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.557562] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.557603] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.557617] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff 64bit] [ 0.557685] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.564074] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.564082] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.564177] pci 0000:03:00.0: [1106:0415] type 00 class 0x010185 [ 0.564199] pci 0000:03:00.0: reg 0x10: [io 0xdc00-0xdc07] [ 0.564214] pci 0000:03:00.0: reg 0x14: [io 0xd880-0xd883] [ 0.564229] pci 0000:03:00.0: reg 0x18: [io 0xd800-0xd807] [ 0.564243] pci 0000:03:00.0: reg 0x1c: [io 0xd480-0xd483] [ 0.564258] pci 0000:03:00.0: reg 0x20: [io 0xd400-0xd40f] [ 0.564286] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref] [ 0.564359] pci 0000:03:00.0: supports D1 D2 [ 0.564361] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.572084] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.572090] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.572093] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.572176] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.572189] pci 0000:04:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.572209] pci 0000:04:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.572221] pci 0000:04:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.572274] pci 0000:04:00.0: supports D1 D2 [ 0.572276] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.572302] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.580084] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.580091] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.580095] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.580156] pci 0000:05:05.0: [168c:0029] type 00 class 0x028000 [ 0.580175] pci 0000:05:05.0: reg 0x10: [mem 0xfebf0000-0xfebfffff] [ 0.580258] pci 0000:05:05.0: PME# supported from D0 D3hot [ 0.580320] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.580325] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.580328] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.580330] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.580332] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.580333] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.580335] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.580336] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.596709] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.596763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.596814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 0.596864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 *10 11 14 15) [ 0.596904] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 14 15) [ 0.596937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.596970] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.597003] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.597160] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.597166] ACPI: \_SB_.PCI0: notify handler is installed [ 0.597206] Found 1 acpi root devices [ 0.597237] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.597365] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.597367] vgaarb: loaded [ 0.597368] vgaarb: bridge control possible 0000:01:05.0 [ 0.597510] SCSI subsystem initialized [ 0.597581] libata version 3.00 loaded. [ 0.597593] ACPI: bus type USB registered [ 0.597608] usbcore: registered new interface driver usbfs [ 0.597614] usbcore: registered new interface driver hub [ 0.597651] usbcore: registered new device driver usb [ 0.597768] PCI: Using ACPI for IRQ routing [ 0.603902] PCI: pci_cache_line_size set to 64 bytes [ 0.603956] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.603958] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff] [ 0.604043] NetLabel: Initializing [ 0.604044] NetLabel: domain hash size = 128 [ 0.604045] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.604053] NetLabel: unlabeled traffic allowed by default [ 0.604128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.604132] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.606190] Switched to clocksource hpet [ 0.610777] AppArmor: AppArmor Filesystem Enabled [ 0.610802] pnp: PnP ACPI init [ 0.610815] ACPI: bus type PNP registered [ 0.610946] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.626318] pnp 00:01: [dma 4] [ 0.626361] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.626390] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.626409] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.626429] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.626639] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.626889] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.626891] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.626894] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.627066] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.627068] system 00:07: [io 0x040b] has been reserved [ 0.627070] system 00:07: [io 0x04d6] has been reserved [ 0.627071] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.627073] system 00:07: [io 0x0c14] has been reserved [ 0.627075] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.627076] system 00:07: [io 0x0c52] has been reserved [ 0.627078] system 00:07: [io 0x0c6c] has been reserved [ 0.627080] system 00:07: [io 0x0c6f] has been reserved [ 0.627082] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.627083] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.627085] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.627087] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.627088] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.627090] system 00:07: [io 0x0b00-0x0b3f] has been reserved [ 0.627092] system 00:07: [io 0x0800-0x089f] could not be reserved [ 0.627094] system 00:07: [io 0x0b00-0x0b1f] has been reserved [ 0.627095] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.627097] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.627099] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.627101] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.627103] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.627105] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.627106] system 00:07: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.627108] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.627110] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.627243] system 00:08: [io 0x0230-0x023f] has been reserved [ 0.627247] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.627249] system 00:08: [io 0x0300-0x030f] has been reserved [ 0.627251] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.627253] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.627305] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.627307] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.627407] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.627409] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.627411] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.627413] system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.627414] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.627416] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.627487] pnp: PnP ACPI: found 11 devices [ 0.627488] ACPI: bus type PNP unregistered [ 0.633953] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.633955] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.633958] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.633961] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.633964] pci 0000:00:07.0: PCI bridge to [bus 02] [ 0.633966] pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.633970] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.633972] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.633974] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.633977] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.633979] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.633982] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.633985] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.633989] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.633996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.633997] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.633999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.634000] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.634002] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.634003] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.634005] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.634006] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff] [ 0.634008] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.634010] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.634011] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.634013] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.634015] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.634016] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.634018] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.634019] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.634021] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.634022] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.634024] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.634025] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.634027] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.634056] NET: Registered protocol family 2 [ 0.634232] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.634520] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.634743] TCP: Hash tables configured (established 65536 bind 65536) [ 0.634780] TCP: reno registered [ 0.634793] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.634837] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.634941] NET: Registered protocol family 1 [ 0.634952] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.694954] pci 0000:01:05.0: Boot video device [ 1.698844] PCI: CLS 64 bytes, default 64 [ 1.698893] Trying to unpack rootfs image as initramfs... [ 1.951436] Freeing initrd memory: 18216K (ffff880035c5c000 - ffff880036e26000) [ 1.951730] PCI-DMA: Disabling AGP. [ 1.951802] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.951803] PCI-DMA: using GART IOMMU. [ 1.951806] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.954480] LVT offset 1 assigned for vector 0x400 [ 1.954490] IBS: LVT offset 1 assigned [ 1.954512] perf: AMD IBS detected (0x0000001f) [ 1.954542] Scanning for low memory corruption every 60 seconds [ 1.954780] Initialise module verification [ 1.954845] audit: initializing netlink socket (disabled) [ 1.954855] type=2000 audit(1383421566.668:1): initialized [ 1.978135] bounce pool size: 64 pages [ 1.978145] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.979411] zbud: loaded [ 1.979622] VFS: Disk quotas dquot_6.5.2 [ 1.979660] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.980130] fuse init (API version 7.22) [ 1.980242] msgmni has been set to 15460 [ 1.980742] Key type asymmetric registered [ 1.980743] Asymmetric key parser 'x509' registered [ 1.980769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.980801] io scheduler noop registered [ 1.980802] io scheduler deadline registered (default) [ 1.980823] io scheduler cfq registered [ 1.980937] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 1.981073] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X [ 1.981175] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 1.981233] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 1.981235] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.981237] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 1.981246] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 1.981248] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.981250] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 1.981259] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 1.981261] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.981263] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 1.981273] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.981284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.162593] Console: switching to colour frame buffer device 175x65 [ 2.342736] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 2.342865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.342871] ACPI: Power Button [PWRB] [ 2.342898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.342900] ACPI: Power Button [PWRF] [ 2.342955] ACPI: processor limited to max C-state 1 [ 2.343427] GHES: HEST is not enabled! [ 2.343540] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.344807] Linux agpgart interface v0.103 [ 2.345950] brd: module loaded [ 2.346742] loop: module loaded [ 2.347058] libphy: Fixed MDIO Bus: probed [ 2.347121] tun: Universal TUN/TAP device driver, 1.6 [ 2.347122] tun: (C) 1999-2004 Max Krasnyansky [ 2.347219] PPP generic driver version 2.4.2 [ 2.347288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.347292] ehci-pci: EHCI PCI platform driver [ 2.347401] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.347406] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.347410] QUIRK: Enable AMD PLL fix [ 2.347412] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.347421] ehci-pci 0000:00:12.2: debug port 1 [ 2.347459] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800 [ 2.359052] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.359106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.359108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.359109] usb usb1: Product: EHCI Host Controller [ 2.359111] usb usb1: Manufacturer: Linux 3.12.0-1-generic ehci_hcd [ 2.359112] usb usb1: SerialNumber: 0000:00:12.2 [ 2.359238] hub 1-0:1.0: USB hub found [ 2.359245] hub 1-0:1.0: 5 ports detected [ 2.359490] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.359497] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.359500] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.359509] ehci-pci 0000:00:13.2: debug port 1 [ 2.359535] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400 [ 2.371034] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.371088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.371089] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.371091] usb usb2: Product: EHCI Host Controller [ 2.371092] usb usb2: Manufacturer: Linux 3.12.0-1-generic ehci_hcd [ 2.371094] usb usb2: SerialNumber: 0000:00:13.2 [ 2.371220] hub 2-0:1.0: USB hub found [ 2.371228] hub 2-0:1.0: 5 ports detected [ 2.371474] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.371479] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.371482] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.371491] ehci-pci 0000:00:16.2: debug port 1 [ 2.371517] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000 [ 2.383039] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.383097] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.383099] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.383101] usb usb3: Product: EHCI Host Controller [ 2.383102] usb usb3: Manufacturer: Linux 3.12.0-1-generic ehci_hcd [ 2.383103] usb usb3: SerialNumber: 0000:00:16.2 [ 2.383234] hub 3-0:1.0: USB hub found [ 2.383241] hub 3-0:1.0: 4 ports detected [ 2.383367] ehci-platform: EHCI generic platform driver [ 2.383380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.383381] ohci-platform: OHCI generic platform driver [ 2.383387] uhci_hcd: USB Universal Host Controller Interface driver [ 2.383505] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.383516] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 2.383649] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X [ 2.383655] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X [ 2.383660] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X [ 2.383748] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.383749] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.383751] usb usb4: Product: xHCI Host Controller [ 2.383753] usb usb4: Manufacturer: Linux 3.12.0-1-generic xhci_hcd [ 2.383754] usb usb4: SerialNumber: 0000:02:00.0 [ 2.383873] hub 4-0:1.0: USB hub found [ 2.383881] hub 4-0:1.0: 2 ports detected [ 2.383950] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.383952] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5 [ 2.387035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.387037] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.387038] usb usb5: Product: xHCI Host Controller [ 2.387040] usb usb5: Manufacturer: Linux 3.12.0-1-generic xhci_hcd [ 2.387041] usb usb5: SerialNumber: 0000:02:00.0 [ 2.387173] hub 5-0:1.0: USB hub found [ 2.387185] hub 5-0:1.0: 2 ports detected [ 2.395132] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.395483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.395488] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.395618] mousedev: PS/2 mouse device common for all mice [ 2.395735] rtc_cmos 00:02: RTC can wake from S4 [ 2.395866] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.395888] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.395949] device-mapper: uevent: version 1.0.3 [ 2.396033] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 2.396039] ledtrig-cpu: registered to indicate activity on CPUs [ 2.396103] TCP: cubic registered [ 2.396170] NET: Registered protocol family 10 [ 2.396320] NET: Registered protocol family 17 [ 2.396327] Key type dns_resolver registered [ 2.396571] Loading module verification certificates [ 2.397431] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d1348473db6fbce21fc4a2b07f89a50676c41014' [ 2.397439] registered taskstats version 1 [ 2.399655] Key type trusted registered [ 2.401255] Key type encrypted registered [ 2.403095] AppArmor: AppArmor sha1 policy hashing enabled [ 2.403384] Magic number: 5:432:798 [ 2.403471] rtc_cmos 00:02: setting system clock to 2013-11-02 19:46:07 UTC (1383421567) [ 2.403543] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.403768] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.403769] EDD information not available. [ 2.403795] PM: Hibernation image not present or could not be loaded. [ 2.404899] Freeing unused kernel memory: 1324K (ffffffff81d1b000 - ffffffff81e66000) [ 2.404902] Write protecting the kernel read-only data: 12288k [ 2.406965] Freeing unused kernel memory: 888K (ffff880001722000 - ffff880001800000) [ 2.408647] Freeing unused kernel memory: 768K (ffff880001b40000 - ffff880001c00000) [ 2.424133] systemd-udevd[106]: starting version 204 [ 2.440003] libahci: module verification failed: signature and/or required key missing - tainting kernel [ 2.440450] ahci 0000:00:11.0: version 3.0 [ 2.440619] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.440622] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.442363] ohci-pci: OHCI PCI platform driver [ 2.443907] scsi0 : ahci [ 2.443992] pata_via 0000:03:00.0: version 0.3.4 [ 2.446636] scsi1 : ahci [ 2.446695] scsi2 : pata_via [ 2.448720] scsi3 : ahci [ 2.448769] scsi4 : pata_via [ 2.448795] ata5: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 2.448797] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 2.448809] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.449017] r8169 0000:04:00.0: irq 46 for MSI/MSI-X [ 2.449146] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xffffc90000c3c000, bc:ae:c5:90:3e:a4, XID 0c200000 IRQ 46 [ 2.449148] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.450599] scsi5 : ahci [ 2.450647] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19 [ 2.450650] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19 [ 2.450652] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19 [ 2.450654] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19 [ 2.450958] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.450965] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.450991] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000 [ 2.507118] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.507122] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.507124] usb usb6: Product: OHCI PCI host controller [ 2.507126] usb usb6: Manufacturer: Linux 3.12.0-1-generic ohci_hcd [ 2.507127] usb usb6: SerialNumber: 0000:00:12.0 [ 2.507268] hub 6-0:1.0: USB hub found [ 2.507277] hub 6-0:1.0: 5 ports detected [ 2.507508] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.507513] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.507527] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000 [ 2.567144] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.567147] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.567149] usb usb7: Product: OHCI PCI host controller [ 2.567150] usb usb7: Manufacturer: Linux 3.12.0-1-generic ohci_hcd [ 2.567151] usb usb7: SerialNumber: 0000:00:13.0 [ 2.567298] hub 7-0:1.0: USB hub found [ 2.567306] hub 7-0:1.0: 5 ports detected [ 2.567532] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.567537] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 2.567554] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000 [ 2.627195] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.627199] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.627200] usb usb8: Product: OHCI PCI host controller [ 2.627202] usb usb8: Manufacturer: Linux 3.12.0-1-generic ohci_hcd [ 2.627203] usb usb8: SerialNumber: 0000:00:14.5 [ 2.627324] hub 8-0:1.0: USB hub found [ 2.627332] hub 8-0:1.0: 2 ports detected [ 2.627534] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.627540] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 2.627555] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f7000 [ 2.687208] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.687212] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.687214] usb usb9: Product: OHCI PCI host controller [ 2.687215] usb usb9: Manufacturer: Linux 3.12.0-1-generic ohci_hcd [ 2.687217] usb usb9: SerialNumber: 0000:00:16.0 [ 2.687357] hub 9-0:1.0: USB hub found [ 2.687365] hub 9-0:1.0: 4 ports detected [ 2.687598] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 2.687843] scsi6 : pata_atiixp [ 2.688426] scsi7 : pata_atiixp [ 2.688462] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.688463] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.763224] ata3: SATA link down (SStatus 0 SControl 300) [ 2.935300] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.936952] ata2.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100 [ 2.938920] ata2.00: configured for UDMA/100 [ 2.939293] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.940113] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.940116] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 2.940118] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.940455] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.940541] ata1.00: configured for UDMA/133 [ 2.940755] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5 [ 2.941116] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.941173] sd 0:0:0:0: [sda] Write Protect is off [ 2.941176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.941193] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.941413] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.942673] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5 [ 2.943153] sda: sda1 sda2 sda3 sda4 [ 2.943288] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.943611] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.944602] ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 [ 2.944606] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.944824] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.944828] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.945053] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.945197] ata4.00: configured for UDMA/133 [ 2.945547] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.945672] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5 [ 2.945790] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.945804] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.945806] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 2.945866] sd 5:0:0:0: [sdb] Write Protect is off [ 2.945868] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.945885] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.951268] tsc: Refined TSC clocksource calibration: 3113.846 MHz [ 2.979563] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.006739] sdb: sdb1 [ 3.006996] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.095362] usb 7-1: new full-speed USB device number 2 using ohci-pci [ 3.196271] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.261251] systemd-udevd[296]: starting version 204 [ 3.270491] usb 7-1: New USB device found, idVendor=046d, idProduct=c52b [ 3.270495] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.270497] usb 7-1: Product: USB Receiver [ 3.270499] usb 7-1: Manufacturer: Logitech [ 3.333850] lp: driver loaded but no devices found [ 3.351383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.361527] wmi: Mapper loaded [ 3.369552] [drm] Initialized drm 1.1.0 20060810 [ 3.402989] hidraw: raw HID events driver (C) Jiri Kosina [ 3.403727] [drm] radeon kernel modesetting enabled. [ 3.403801] checking generic (d0000000 5a4000) vs hw (d0000000 10000000) [ 3.403802] fb: conflicting fb hw usage radeondrmfb vs simple - removing generic driver [ 3.403821] Console: switching to colour dummy device 80x25 [ 3.404022] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E). [ 3.404035] [drm] register mmio base: 0xFE8F0000 [ 3.404036] [drm] register mmio size: 65536 [ 3.404552] ATOM BIOS: 113 [ 3.404571] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 3.404573] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 3.404577] [drm] Detected VRAM RAM=256M, BAR=256M [ 3.404578] [drm] RAM width 32bits DDR [ 3.405714] [TTM] Zone kernel: Available graphics memory: 3959306 kiB [ 3.405717] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.405718] [TTM] Initializing pool allocator [ 3.405722] [TTM] Initializing DMA pool allocator [ 3.405741] [drm] radeon: 256M of VRAM memory ready [ 3.405742] [drm] radeon: 512M of GTT memory ready. [ 3.405755] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.410302] [drm] Loading RS780 Microcode [ 3.419671] usbcore: registered new interface driver usbhid [ 3.419674] usbhid: USB HID core driver [ 3.449241] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 3.457083] radeon 0000:01:05.0: WB enabled [ 3.457089] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8802135cec00 [ 3.457092] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8802135cec0c [ 3.457095] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.457096] [drm] Driver supports precise vblank timestamp query. [ 3.457111] [drm] radeon: irq initialized. [ 3.457354] radeon 0000:01:05.0: setting latency timer to 64 [ 3.467251] type=1400 audit(1383421568.557:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=367 comm="apparmor_parser" [ 3.467257] type=1400 audit(1383421568.557:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser" [ 3.467260] type=1400 audit(1383421568.557:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser" [ 3.468218] type=1400 audit(1383421568.561:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser" [ 3.468222] type=1400 audit(1383421568.561:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser" [ 3.468483] type=1400 audit(1383421568.561:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser" [ 3.490420] [drm] ring test on 0 succeeded in 1 usecs [ 3.490478] [drm] ring test on 3 succeeded in 1 usecs [ 3.490643] [drm] Enabling audio 0 support [ 3.490726] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.490739] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.490927] [drm] Radeon Display Connectors [ 3.490928] [drm] Connector 0: [ 3.490929] [drm] VGA-1 [ 3.490930] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 3.490931] [drm] Encoders: [ 3.490932] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.490933] [drm] Connector 1: [ 3.490934] [drm] HDMI-A-1 [ 3.490935] [drm] HPD3 [ 3.490936] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 3.490937] [drm] Encoders: [ 3.490938] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 3.490956] [drm] radeon: power management initialized [ 3.496611] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130725/utaddress-251) [ 3.496618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.497856] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 3.497904] sp5100_tco: PCI Revision ID: 0x42 [ 3.497933] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 3.497943] sp5100_tco: Last reboot was not triggered by watchdog. [ 3.498108] sp5100_tco: initialized (0xffffc90000c4cb00). heartbeat=60 sec (nowayout=0) [ 3.694443] [drm] fb mappable at 0xD0141000 [ 3.694447] [drm] vram apper at 0xD0000000 [ 3.694448] [drm] size 8294400 [ 3.694449] [drm] fb depth is 24 [ 3.694450] [drm] pitch is 7680 [ 3.694511] fbcon: radeondrmfb (fb0) is primary device [ 3.694829] hda-intel 0000:00:14.2: Using LPIB position fix [ 3.698297] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 3.699498] cfg80211: Calling CRDA to update world regulatory domain [ 3.702425] Console: switching to colour frame buffer device 240x67 [ 3.720233] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.897619] MCE: In-kernel MCE decoding enabled. [ 3.899556] EDAC MC: Ver: 3.0.0 [ 3.905134] AMD64 EDAC driver v3.4.0 [ 3.970447] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 3.970449] radeon 0000:01:05.0: registered panic notifier [ 3.970568] Switched to clocksource tsc [ 3.972084] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0 [ 3.972332] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 4.015342] microcode: CPU0: patch_level=0x010000b6 [ 4.018549] microcode: CPU0: new patch_level=0x010000c8 [ 4.018579] microcode: CPU1: patch_level=0x010000b6 [ 4.018585] microcode: CPU1: new patch_level=0x010000c8 [ 4.043907] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 5.297828] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2 [ 5.300730] input: Logitech Unifying Device. Wireless PID:4011 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input2 [ 5.300917] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4011] on usb-0000:00:13.0-1:2 [ 5.302680] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input3 [ 5.302806] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:13.0-1:1 [ 5.532384] [sched_delayed] sched: RT throttling activated [ 5.534840] ath: EEPROM regdomain: 0x10 [ 5.534841] ath: EEPROM indicates we should expect a direct regpair map [ 5.534842] ath: Country alpha2 being used: CO [ 5.534843] ath: Regpair used: 0x10 [ 5.538262] kvm: Nested Virtualization enabled [ 5.538265] kvm: Nested Paging enabled [ 5.543419] SKU: Nid=0x1d sku_cfg=0x4005e601 [ 5.543419] SKU: port_connectivity=0x1 [ 5.543419] SKU: enable_pcbeep=0x0 [ 5.543420] SKU: check_sum=0x00000005 [ 5.543420] SKU: customization=0x000000e6 [ 5.543420] SKU: external_amp=0x0 [ 5.543421] SKU: platform_type=0x0 [ 5.543421] SKU: swap=0x0 [ 5.543421] SKU: override=0x1 [ 5.543917] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.543918] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.543919] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.543919] mono: mono_out=0x0 [ 5.543920] dig-out=0x11/0x1e [ 5.543920] inputs: [ 5.543921] Front Mic=0x19 [ 5.543921] Rear Mic=0x18 [ 5.543922] Line=0x1a [ 5.543923] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d [ 5.543923] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892 [ 5.580353] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 5.580685] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 5.580759] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 5.580824] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 5.580889] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 5.580953] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 5.581158] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 5.581240] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 5.587717] hda-intel 0000:01:05.1: Using LPIB position fix [ 5.587745] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [ 5.587766] EDAC amd64: DRAM ECC disabled. [ 5.587774] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 5.587774] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 5.587774] (Note that use of the override may cause unknown side effects.) [ 5.593771] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.596038] hda-intel 0000:01:05.1: Enable sync_write for stable communication [ 5.602922] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input12 [ 5.622151] XFS (sdb1): Mounting Filesystem [ 5.652183] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.652514] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90011620000, irq=20 [ 5.718688] cfg80211: World regulatory domain updated: [ 5.718692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.718694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.718696] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.718697] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.718698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.718700] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.718892] cfg80211: Calling CRDA for country: CO [ 5.721670] cfg80211: Regulatory domain changed to country: CO [ 5.721673] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.721675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 5.721677] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 5.721678] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 5.721679] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 5.751516] XFS (sdb1): Ending clean mount [ 9.987611] init: failsafe main process (736) killed by TERM signal [ 10.043205] init: flush-early-job-log main process (741) terminated with status 1 [ 10.085986] Bluetooth: Core ver 2.16 [ 10.088812] NET: Registered protocol family 31 [ 10.088815] Bluetooth: HCI device and connection manager initialized [ 10.089200] Bluetooth: HCI socket layer initialized [ 10.089203] Bluetooth: L2CAP socket layer initialized [ 10.089208] Bluetooth: SCO socket layer initialized [ 10.092998] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.093001] Bluetooth: BNEP filters: protocol multicast [ 10.093011] Bluetooth: BNEP socket layer initialized [ 10.134126] Bluetooth: RFCOMM TTY layer initialized [ 10.134138] Bluetooth: RFCOMM socket layer initialized [ 10.134140] Bluetooth: RFCOMM ver 1.11 [ 10.240486] init: avahi-cups-reload main process (857) terminated with status 1 [ 10.245949] ppdev: user-space parallel port driver [ 10.285289] type=1400 audit(1383421575.374:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=894 comm="apparmor_parser" [ 10.285295] type=1400 audit(1383421575.374:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=894 comm="apparmor_parser" [ 10.285864] type=1400 audit(1383421575.374:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=894 comm="apparmor_parser" [ 10.308020] type=1400 audit(1383421575.398:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=908 comm="apparmor_parser" [ 10.308027] type=1400 audit(1383421575.398:12): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=908 comm="apparmor_parser" [ 10.308450] type=1400 audit(1383421575.398:13): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=908 comm="apparmor_parser" [ 10.313198] type=1400 audit(1383421575.402:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=907 comm="apparmor_parser" [ 10.313204] type=1400 audit(1383421575.402:15): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=907 comm="apparmor_parser" [ 10.313638] type=1400 audit(1383421575.402:16): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=907 comm="apparmor_parser" [ 10.317120] type=1400 audit(1383421575.406:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=909 comm="apparmor_parser" [ 10.402418] r8169 0000:04:00.0 eth0: link down [ 10.402490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.402904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.420304] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.420520] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.606953] /dev/vmmon[992]: Module vmmon: registered with major=10 minor=165 [ 10.606959] /dev/vmmon[992]: Module vmmon: initialized [ 10.626446] Guest personality initialized and is inactive [ 10.627400] VMCI host device registered (name=vmci, major=10, minor=57) [ 10.627403] Initialized host personality [ 10.727333] NET: Registered protocol family 40 [ 11.512381] /dev/vmnet: open called by PID 1228 (vmnet-netifup) [ 11.512390] /dev/vmnet: hub 1 does not exist, allocating memory. [ 11.512403] /dev/vmnet: port on hub 1 successfully opened [ 11.546904] /dev/vmnet: open called by PID 1234 (vmnet-dhcpd) [ 11.546917] /dev/vmnet: port on hub 1 successfully opened [ 11.558055] /dev/vmnet: open called by PID 1243 (vmnet-natd) [ 11.558065] /dev/vmnet: hub 8 does not exist, allocating memory. [ 11.558079] /dev/vmnet: port on hub 8 successfully opened [ 11.560735] /dev/vmnet: open called by PID 1245 (vmnet-netifup) [ 11.560748] /dev/vmnet: port on hub 8 successfully opened [ 11.598697] /dev/vmnet: open called by PID 1252 (vmnet-dhcpd) [ 11.598712] /dev/vmnet: port on hub 8 successfully opened [ 11.847673] wlan0: authenticate with 10:6f:3f:26:66:85 [ 11.877542] wlan0: send auth to 10:6f:3f:26:66:85 (try 1/3) [ 11.880531] wlan0: authenticated [ 11.883302] wlan0: associate with 10:6f:3f:26:66:85 (try 1/3) [ 11.890260] wlan0: RX AssocResp from 10:6f:3f:26:66:85 (capab=0x411 status=0 aid=1) [ 11.890321] wlan0: associated [ 11.890345] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 11.904469] /dev/vmnet: open called by PID 1142 (vmnet-bridge) [ 11.904480] /dev/vmnet: hub 0 does not exist, allocating memory. [ 11.904493] /dev/vmnet: port on hub 0 successfully opened [ 11.904504] bridge-wlan0: device is wireless, enabling SMAC [ 11.904506] bridge-wlan0: up [ 11.904508] bridge-wlan0: attached [ 12.104494] userif-2: sent link down event. [ 12.104498] userif-2: sent link up event. [ 12.459797] vboxdrv: Found 2 processor cores. [ 12.465225] vboxdrv: fAsync=0 offMin=0x5c7 offMax=0x1c40 [ 12.467277] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 12.467281] vboxdrv: Successfully loaded version 4.3.0 (interface 0x001a0005). [ 12.690150] vboxpci: IOMMU not found (not registered) [ 13.181216] userif-2: sent link down event. [ 13.181222] userif-2: sent link up event. [ 13.452023] NET: Unregistered protocol family 40 [ 13.540660] /dev/vmmon[1832]: Module vmmon: unloaded [ 13.589880] bridge-wlan0: disabling the bridge [ 13.604109] bridge-wlan0: down [ 13.604118] bridge-wlan0: detached [ 25.346782] /dev/vmmon[3268]: Module vmmon: registered with major=10 minor=165 [ 25.346788] /dev/vmmon[3268]: Module vmmon: initialized [ 25.372340] Guest personality initialized and is inactive [ 25.372397] VMCI host device registered (name=vmci, major=10, minor=57) [ 25.372399] Initialized host personality [ 25.401906] NET: Registered protocol family 40 [ 25.520611] /dev/vmnet: open called by PID 3349 (vmnet-bridge) [ 25.520621] /dev/vmnet: hub 0 does not exist, allocating memory. [ 25.520634] /dev/vmnet: port on hub 0 successfully opened [ 25.520644] bridge-wlan0: device is wireless, enabling SMAC [ 25.520646] bridge-wlan0: up [ 25.520649] bridge-wlan0: attached [ 26.532398] /dev/vmnet: open called by PID 3406 (vmnet-netifup) [ 26.532408] /dev/vmnet: hub 1 does not exist, allocating memory. [ 26.532421] /dev/vmnet: port on hub 1 successfully opened [ 26.563131] /dev/vmnet: open called by PID 3410 (vmnet-dhcpd) [ 26.563145] /dev/vmnet: port on hub 1 successfully opened [ 26.567634] /dev/vmnet: open called by PID 3417 (vmnet-natd) [ 26.567645] /dev/vmnet: hub 8 does not exist, allocating memory. [ 26.567659] /dev/vmnet: port on hub 8 successfully opened [ 26.568721] userif-3: sent link down event. [ 26.568724] userif-3: sent link up event. [ 26.570478] /dev/vmnet: open called by PID 3419 (vmnet-netifup) [ 26.570499] /dev/vmnet: port on hub 8 successfully opened [ 26.609211] /dev/vmnet: open called by PID 3421 (vmnet-dhcpd) [ 26.609232] /dev/vmnet: port on hub 8 successfully opened [ 28.227559] init: plymouth-stop pre-start process (3636) terminated with status 1 [ 28.758188] deprecated_sysctl_warning: 144 callbacks suppressed [ 28.758195] warning: process `vmware-hostd' used the deprecated sysctl system call with 1.1. [ 31.459720] systemd-hostnamed[3722]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!