[ 9.327896] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 9.405957] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.406226] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.412244] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [ 9.412446] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [ 9.557841] Adding 8388604k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8388604k SSFS [ 10.575575] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.575581] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 10.575615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.872969] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 13.346308] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 13.589700] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17 [ 15.911654] wlan0: authenticate with 00:25:5e:d7:5f:18 [ 15.916115] wlan0: send auth to 00:25:5e:d7:5f:18 (try 1/3) [ 15.918273] wlan0: authenticated [ 15.918369] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 15.918372] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 15.918374] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 15.921173] wlan0: associate with 00:25:5e:d7:5f:18 (try 1/3) [ 15.923553] wlan0: RX AssocResp from 00:25:5e:d7:5f:18 (capab=0x11 status=0 aid=2) [ 15.926821] wlan0: associated [ 15.926844] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3138.424046] wlan0: deauthenticating from 00:25:5e:d7:5f:18 by local choice (reason=3) [ 3138.442602] cfg80211: Calling CRDA to update world regulatory domain [ 3138.447325] cfg80211: World regulatory domain updated: [ 3138.447331] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3138.447335] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3138.447338] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3138.447340] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3138.447343] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3138.447345] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3138.887814] PM: Syncing filesystems ... done. [ 3138.892811] PM: Preparing system for mem sleep [ 3138.893021] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3138.894340] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 3138.894958] PM: Entering mem sleep [ 3138.894998] Suspending console(s) (use no_console_suspend to debug) [ 3139.046012] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3139.046932] sd 0:0:0:0: [sda] Stopping disk [ 3139.275637] mei_me 0000:00:16.0: suspend [ 3139.291231] i915 0000:00:02.0: power state changed by ACPI to D3cold [ 3139.329465] PM: suspend of devices complete after 434.081 msecs [ 3139.329594] PM: late suspend of devices complete after 0.127 msecs [ 3139.343341] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 3139.359245] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold [ 3139.359448] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 3139.375255] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold [ 3139.375284] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 3139.407303] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3139.423285] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [ 3139.423308] PM: noirq suspend of devices complete after 93.651 msecs [ 3139.423480] ACPI: Preparing to enter system sleep state S3 [ 3139.425615] PM: Saving platform NVS memory [ 3139.426211] Disabling non-boot CPUs ... [ 3139.427614] smpboot: CPU 1 is now offline [ 3139.531355] smpboot: CPU 2 is now offline [ 3139.635435] smpboot: CPU 3 is now offline [ 3139.636547] ACPI: Low-level resume complete [ 3139.636584] PM: Restoring platform NVS memory [ 3139.637041] Enabling non-boot CPUs ... [ 3139.637076] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3139.728942] CPU1 is up [ 3139.728974] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 3139.821003] CPU2 is up [ 3139.821021] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 3139.913064] CPU3 is up [ 3139.915967] ACPI: Waking up from system sleep state S3 [ 3139.979517] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking [ 3139.981128] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! [ 3139.981982] i915 0000:00:02.0: power state changed by ACPI to D0 [ 3139.997062] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 3140.013117] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3140.061139] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0 [ 3140.077151] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 3140.093389] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0 [ 3140.109172] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3140.141425] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 3140.157606] PM: noirq resume of devices complete after 175.537 msecs [ 3140.157708] PM: early resume of devices complete after 0.082 msecs [ 3140.157732] i915 0000:00:02.0: setting latency timer to 64 [ 3140.157736] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 3140.157760] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [ 3140.157778] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 3140.157799] e1000e 0000:00:19.0: setting latency timer to 64 [ 3140.157818] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 3140.157838] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 3140.157902] ahci 0000:00:1f.2: setting latency timer to 64 [ 3140.158068] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 3140.158167] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 3140.205208] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [ 3140.369413] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [ 3140.463110] btusb 1-1.4:1.0: no reset_resume for driver btusb? [ 3140.463113] btusb 1-1.4:1.1: no reset_resume for driver btusb? [ 3140.477382] ata2: SATA link down (SStatus 0 SControl 300) [ 3140.481386] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3140.485381] ata5: SATA link down (SStatus 0 SControl 300) [ 3140.533534] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 3140.697677] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 3140.832885] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3140.832889] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3140.852862] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3140.852866] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3140.861863] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [ 3140.862905] ata1.00: configured for UDMA/133 [ 3140.877714] sd 0:0:0:0: [sda] Starting disk [ 3141.069983] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 3141.085975] usb 3-4: device firmware changed [ 3141.087144] PM: resume of devices complete after 928.820 msecs [ 3141.087418] ------------[ cut here ]------------ [ 3141.087425] WARNING: CPU: 2 PID: 229 at /build/buildd/linux-3.11.0/drivers/base/firmware_class.c:1085 _request_firmware+0x948/0xa60() [ 3141.087452] Modules linked in: dm_crypt pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) parport_pc ppdev rfcomm bnep nfsd auth_rpcgss binfmt_misc nfs_acl nfs lockd sunrpc fscache x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev snd_hda_codec_hdmi snd_hda_codec_realtek cdc_mbim snd_hda_intel uvcvideo snd_hda_codec videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hwdep cdc_ncm thinkpad_acpi videodev cdc_acm usbnet cdc_wdm snd_pcm mii nvram btusb snd_seq_midi wacom snd_seq_midi_event bluetooth arc4 snd_page_alloc iwldvm mac80211 snd_rawmidi iwlwifi snd_seq snd_seq_device snd_timer psmouse cfg80211 snd mei_me microcode mei serio_raw soundcore lpc_ich tpm_tis mac_hid lp parport hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper e1000e ahci drm sdhci_pci libahci ptp sdhci pps_core wmi video [ 3141.087461] CPU: 2 PID: 229 Comm: kworker/u17:1 Tainted: GF O 3.11.0-18-generic #32-Ubuntu [ 3141.087461] Hardware name: LENOVO 34382AG/34382AG, BIOS GCET92WW (2.52 ) 02/25/2013 [ 3141.087472] Workqueue: hci0 hci_power_on [bluetooth] [ 3141.087475] 0000000000000009 ffff880112cf3c78 ffffffff816e8571 0000000000000000 [ 3141.087478] ffff880112cf3cb0 ffffffff81061e2d ffff880112cf3d8c 00000000fffffff5 [ 3141.087481] ffff8800c3eda8c0 ffff880112cf3d80 0000000000000220 ffff880112cf3cc0 [ 3141.087482] Call Trace: [ 3141.087486] [] dump_stack+0x45/0x56 [ 3141.087490] [] warn_slowpath_common+0x7d/0xa0 [ 3141.087492] [] warn_slowpath_null+0x1a/0x20 [ 3141.087494] [] _request_firmware+0x948/0xa60 [ 3141.087497] [] request_firmware+0x34/0x50 [ 3141.087500] [] btusb_setup_patchram+0x72/0x1c0 [btusb] [ 3141.087507] [] hci_dev_open+0x255/0x360 [bluetooth] [ 3141.087512] [] hci_power_on+0x31/0xf0 [bluetooth] [ 3141.087515] [] process_one_work+0x17c/0x430 [ 3141.087517] [] worker_thread+0x11c/0x3c0 [ 3141.087519] [] ? manage_workers.isra.25+0x2a0/0x2a0 [ 3141.087522] [] kthread+0xc0/0xd0 [ 3141.087524] [] ? kthread_create_on_node+0x120/0x120 [ 3141.087527] [] ret_from_fork+0x7c/0xb0 [ 3141.087530] [] ? kthread_create_on_node+0x120/0x120 [ 3141.087530] ---[ end trace 8bf3e4141028add6 ]--- [ 3141.087532] usb 1-1.4: firmware: fw-0a5c_21e6.hcd will not be loaded [ 3141.087533] Bluetooth: can't load firmware, may not work correctly [ 3141.087559] PM: Finishing wakeup. [ 3141.088401] usb 3-4: USB disconnect, device number 3 [ 3141.088798] cdc_ncm 3-4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:14.0-4, Mobile Broadband Network Device [ 3141.087561] Restarting tasks ... done. [ 3141.100219] video LNXVIDEO:00: Restoring backlight state [ 3141.126236] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3d80 [ 3141.126239] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3dc0 [ 3141.126241] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3e00 [ 3141.126242] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3e40 [ 3141.126243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3f00 [ 3141.126244] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3f40 [ 3141.126246] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b0580 [ 3141.126247] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3e80 [ 3141.126248] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131f3ec0 [ 3141.126249] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b0500 [ 3141.126250] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b0540 [ 3141.126252] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b04c0 [ 3141.126253] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b0480 [ 3141.126254] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801131b0440 [ 3141.237899] usb 3-4: new high-speed USB device number 4 using xhci_hcd [ 3141.254265] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1912 [ 3141.254272] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=5 [ 3141.254276] usb 3-4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w [ 3141.254279] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [ 3141.255325] usbhid 3-4:1.0: can't add hid device: -71 [ 3141.255356] usbhid: probe of 3-4:1.0 failed with error -71 [ 3141.255472] usb 3-4: USB disconnect, device number 4 [ 3141.532721] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 3141.634233] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 3141.634491] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3141.636038] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 3141.643286] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 3141.730905] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3141.890320] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 3142.294611] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 3142.317662] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1911 [ 3142.317670] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3142.317674] usb 3-4: Product: F5521gw [ 3142.317677] usb 3-4: Manufacturer: Lenovo [ 3142.317680] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [ 3142.350374] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [ 3142.354116] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [ 3142.362729] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [ 3142.377785] usb 3-4: MAC-Address: 02:80:37:ec:02:00 [ 3142.378301] cdc_ncm 3-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 3142.379428] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device [ 3142.379879] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 3143.229479] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 3143.229489] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 3143.229542] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3143.246891] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [ 3143.247127] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [ 3148.185938] wlan0: authenticate with 00:25:5e:d7:5f:18 [ 3148.189081] wlan0: send auth to 00:25:5e:d7:5f:18 (try 1/3) [ 3148.191374] wlan0: authenticated [ 3148.191601] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 3148.191609] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 3148.191614] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 3148.194482] wlan0: associate with 00:25:5e:d7:5f:18 (try 1/3) [ 3148.197054] wlan0: RX AssocResp from 00:25:5e:d7:5f:18 (capab=0x11 status=0 aid=2) [ 3148.203424] wlan0: associated [ 3148.203489] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [16199.139767] systemd-hostnamed[4801]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [16649.064858] wlan0: deauthenticating from 00:25:5e:d7:5f:18 by local choice (reason=3) [16649.084331] cfg80211: Calling CRDA to update world regulatory domain [16649.089664] cfg80211: World regulatory domain updated: [16649.089670] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [16649.089673] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16649.089676] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16649.089679] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [16649.089681] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16649.089684] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [16649.528862] PM: Syncing filesystems ... done. [16649.542159] PM: Preparing system for mem sleep [16649.542430] Freezing user space processes ... (elapsed 0.001 seconds) done. [16649.543847] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [16649.545011] PM: Entering mem sleep [16649.545053] Suspending console(s) (use no_console_suspend to debug) [16649.699913] sd 0:0:0:0: [sda] Synchronizing SCSI cache [16649.700953] sd 0:0:0:0: [sda] Stopping disk [16649.949948] mei_me 0000:00:16.0: suspend [16649.965308] i915 0000:00:02.0: power state changed by ACPI to D3cold [16650.003701] PM: suspend of devices complete after 458.244 msecs [16650.003829] PM: late suspend of devices complete after 0.126 msecs [16650.017392] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [16650.033264] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold [16650.033496] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [16650.049271] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold [16650.049349] e1000e 0000:00:19.0: System wakeup enabled by ACPI [16650.081365] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [16650.097302] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [16650.097358] PM: noirq suspend of devices complete after 93.465 msecs [16650.097811] ACPI: Preparing to enter system sleep state S3 [16650.100925] PM: Saving platform NVS memory [16650.101544] Disabling non-boot CPUs ... [16650.205374] smpboot: CPU 1 is now offline [16650.309441] smpboot: CPU 2 is now offline [16650.309793] Broke affinity for irq 16 [16650.309795] Broke affinity for irq 23 [16650.309798] Broke affinity for irq 43 [16650.413537] smpboot: CPU 3 is now offline [16650.415334] ACPI: Low-level resume complete [16650.415392] PM: Restoring platform NVS memory [16650.416019] Enabling non-boot CPUs ... [16650.416079] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16650.459764] CPU1 is up [16650.459780] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16650.503790] CPU2 is up [16650.503805] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16650.547817] CPU3 is up [16650.550824] ACPI: Waking up from system sleep state S3 [16650.614140] thinkpad_acpi: EC reports that Thermal Table has changed [16650.617872] i915 0000:00:02.0: power state changed by ACPI to D0 [16650.631816] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [16650.647869] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [16650.695888] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0 [16650.711897] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [16650.728126] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0 [16650.743919] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [16650.776094] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [16650.792414] PM: noirq resume of devices complete after 174.459 msecs [16650.792523] PM: early resume of devices complete after 0.085 msecs [16650.792542] i915 0000:00:02.0: setting latency timer to 64 [16650.792555] xhci_hcd 0000:00:14.0: setting latency timer to 64 [16650.792631] e1000e 0000:00:19.0: System wakeup disabled by ACPI [16650.792642] e1000e 0000:00:19.0: setting latency timer to 64 [16650.792670] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [16650.792688] ehci-pci 0000:00:1a.0: setting latency timer to 64 [16650.792771] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [16650.792821] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X [16650.792907] ehci-pci 0000:00:1d.0: setting latency timer to 64 [16650.792925] ahci 0000:00:1f.2: setting latency timer to 64 [16650.835957] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [16651.004147] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [16651.136146] ata5: SATA link down (SStatus 0 SControl 300) [16651.136188] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [16651.144148] ata2: SATA link down (SStatus 0 SControl 300) [16651.168292] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [16651.262097] btusb 1-1.4:1.0: no reset_resume for driver btusb? [16651.262100] btusb 1-1.4:1.1: no reset_resume for driver btusb? [16651.332433] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [16651.350350] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16651.350354] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16651.370331] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [16651.370333] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [16651.380359] ata1.00: configured for UDMA/133 [16651.396405] sd 0:0:0:0: [sda] Starting disk [16651.540621] usb 3-4: reset high-speed USB device number 5 using xhci_hcd [16651.556622] usb 3-4: device firmware changed [16651.556733] PM: resume of devices complete after 763.703 msecs [16651.556992] ------------[ cut here ]------------ [16651.556998] WARNING: CPU: 2 PID: 3063 at /build/buildd/linux-3.11.0/drivers/base/firmware_class.c:1085 _request_firmware+0x948/0xa60() [16651.557026] Modules linked in: dm_crypt pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) parport_pc ppdev rfcomm bnep nfsd auth_rpcgss binfmt_misc nfs_acl nfs lockd sunrpc fscache x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev snd_hda_codec_hdmi snd_hda_codec_realtek cdc_mbim snd_hda_intel uvcvideo snd_hda_codec videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hwdep cdc_ncm thinkpad_acpi videodev cdc_acm usbnet cdc_wdm snd_pcm mii nvram btusb snd_seq_midi wacom snd_seq_midi_event bluetooth arc4 snd_page_alloc iwldvm mac80211 snd_rawmidi iwlwifi snd_seq snd_seq_device snd_timer psmouse cfg80211 snd mei_me microcode mei serio_raw soundcore lpc_ich tpm_tis mac_hid lp parport hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper e1000e ahci drm sdhci_pci libahci ptp sdhci pps_core wmi video [16651.557039] CPU: 2 PID: 3063 Comm: kworker/u17:2 Tainted: GF W O 3.11.0-18-generic #32-Ubuntu [16651.557040] Hardware name: LENOVO 34382AG/34382AG, BIOS GCET92WW (2.52 ) 02/25/2013 [16651.557051] Workqueue: hci0 hci_power_on [bluetooth] [16651.557054] 0000000000000009 ffff8800bcf77c78 ffffffff816e8571 0000000000000000 [16651.557057] ffff8800bcf77cb0 ffffffff81061e2d ffff8800bcf77d8c 00000000fffffff5 [16651.557061] ffff8800bb576620 ffff8800bcf77d80 0000000000000220 ffff8800bcf77cc0 [16651.557061] Call Trace: [16651.557066] [] dump_stack+0x45/0x56 [16651.557069] [] warn_slowpath_common+0x7d/0xa0 [16651.557071] [] warn_slowpath_null+0x1a/0x20 [16651.557073] [] _request_firmware+0x948/0xa60 [16651.557076] [] request_firmware+0x34/0x50 [16651.557079] [] btusb_setup_patchram+0x72/0x1c0 [btusb] [16651.557086] [] hci_dev_open+0x255/0x360 [bluetooth] [16651.557092] [] hci_power_on+0x31/0xf0 [bluetooth] [16651.557095] [] process_one_work+0x17c/0x430 [16651.557097] [] worker_thread+0x11c/0x3c0 [16651.557099] [] ? manage_workers.isra.25+0x2a0/0x2a0 [16651.557102] [] kthread+0xc0/0xd0 [16651.557104] [] ? kthread_create_on_node+0x120/0x120 [16651.557107] [] ret_from_fork+0x7c/0xb0 [16651.557110] [] ? kthread_create_on_node+0x120/0x120 [16651.557111] ---[ end trace 8bf3e4141028add7 ]--- [16651.557112] usb 1-1.4: firmware: fw-0a5c_21e6.hcd will not be loaded [16651.557114] Bluetooth: can't load firmware, may not work correctly [16651.557128] PM: Finishing wakeup. [16651.557757] usb 1-1.2: USB disconnect, device number 3 [16651.560738] usb 3-2: USB disconnect, device number 2 [16651.557129] Restarting tasks ... done. [16651.568658] video LNXVIDEO:00: Restoring backlight state [16651.600960] usb 3-4: USB disconnect, device number 5 [16651.604121] cdc_ncm 3-4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:14.0-4, Mobile Broadband Network Device [16651.633345] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63ba80 [16651.633350] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63bac0 [16651.633352] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b900 [16651.633354] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b940 [16651.633356] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b880 [16651.633359] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b8c0 [16651.633361] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4424200 [16651.633362] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b780 [16651.633364] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb63b7c0 [16651.633366] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4424180 [16651.633368] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c44241c0 [16651.633370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4424140 [16651.633372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4424100 [16651.633373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c44240c0 [16651.800569] usb 3-4: new high-speed USB device number 6 using xhci_hcd [16651.817236] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1912 [16651.817242] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=5 [16651.817246] usb 3-4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w [16651.817249] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [16651.818359] usbhid 3-4:1.0: can't add hid device: -71 [16651.818374] usbhid: probe of 3-4:1.0 failed with error -71 [16651.818479] usb 3-4: USB disconnect, device number 6 [16651.824827] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [16651.928703] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [16651.928908] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [16651.929776] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [16651.936717] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [16652.023483] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [16652.328951] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [16652.829343] usb 3-4: new high-speed USB device number 7 using xhci_hcd [16652.852033] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1911 [16652.852042] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [16652.852046] usb 3-4: Product: F5521gw [16652.852049] usb 3-4: Manufacturer: Lenovo [16652.852052] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [16652.884703] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [16652.887551] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [16652.895880] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [16652.911335] usb 3-4: MAC-Address: 02:80:37:ec:02:00 [16652.911762] cdc_ncm 3-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [16652.912782] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device [16652.913275] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [16653.137608] e1000e 0000:00:19.0: setting latency timer to 64 [16653.137687] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [16657.029955] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [16657.030246] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [16662.728578] wlan0: authenticate with 00:1f:1f:cd:74:a0 [16662.733947] wlan0: send auth to 00:1f:1f:cd:74:a0 (try 1/3) [16662.744091] wlan0: authenticated [16662.747890] wlan0: associate with 00:1f:1f:cd:74:a0 (try 1/3) [16662.766245] wlan0: RX AssocResp from 00:1f:1f:cd:74:a0 (capab=0x401 status=0 aid=2) [16662.769769] wlan0: associated [16662.769850] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [16663.128241] IPv6: wlan0: IPv6 duplicate address fe80::863a:4bff:feae:8e8c detected! [16952.389014] audit_printk_skb: 162 callbacks suppressed [16952.389020] type=1400 audit(1394800756.201:66): apparmor="STATUS" operation="profile_replace" parent=9733 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=9737 comm="apparmor_parser" [16952.389036] type=1400 audit(1394800756.201:67): apparmor="STATUS" operation="profile_replace" parent=9733 profile="unconfined" name="/usr/sbin/cupsd" pid=9737 comm="apparmor_parser" [16952.390218] type=1400 audit(1394800756.205:68): apparmor="STATUS" operation="profile_replace" parent=9733 profile="unconfined" name="/usr/sbin/cupsd" pid=9737 comm="apparmor_parser" [19861.029176] wlan0: deauthenticating from 00:1f:1f:cd:74:a0 by local choice (reason=3) [19861.266493] cfg80211: Calling CRDA to update world regulatory domain [19861.270984] cfg80211: World regulatory domain updated: [19861.270990] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [19861.270993] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19861.270996] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19861.270999] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [19861.271001] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19861.271004] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [19861.847319] PM: Syncing filesystems ... done. [19861.856006] PM: Preparing system for mem sleep [19861.856243] Freezing user space processes ... (elapsed 0.001 seconds) done. [19861.857882] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [19861.858932] PM: Entering mem sleep [19861.858972] Suspending console(s) (use no_console_suspend to debug) [19862.012828] sd 0:0:0:0: [sda] Synchronizing SCSI cache [19862.014064] sd 0:0:0:0: [sda] Stopping disk [19862.231844] mei_me 0000:00:16.0: suspend [19862.247104] i915 0000:00:02.0: power state changed by ACPI to D3cold [19862.286869] PM: suspend of devices complete after 427.510 msecs [19862.286980] PM: late suspend of devices complete after 0.109 msecs [19862.303262] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [19862.319130] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold [19862.319363] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [19862.335138] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold [19862.335213] e1000e 0000:00:19.0: System wakeup enabled by ACPI [19862.367233] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [19862.383170] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [19862.383227] PM: noirq suspend of devices complete after 96.180 msecs [19862.383413] ACPI: Preparing to enter system sleep state S3 [19862.386628] PM: Saving platform NVS memory [19862.387267] Disabling non-boot CPUs ... [19862.491253] smpboot: CPU 1 is now offline [19862.595327] smpboot: CPU 2 is now offline [19862.699375] smpboot: CPU 3 is now offline [19862.701182] ACPI: Low-level resume complete [19862.701235] PM: Restoring platform NVS memory [19862.701887] Enabling non-boot CPUs ... [19862.701942] smpboot: Booting Node 0 Processor 1 APIC 0x1 [19862.745618] CPU1 is up [19862.745635] smpboot: Booting Node 0 Processor 2 APIC 0x2 [19862.789642] CPU2 is up [19862.789657] smpboot: Booting Node 0 Processor 3 APIC 0x3 [19862.833672] CPU3 is up [19862.836698] ACPI: Waking up from system sleep state S3 [19862.902932] i915 0000:00:02.0: power state changed by ACPI to D0 [19862.917665] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [19862.933721] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [19862.981729] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0 [19862.997753] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [19863.013991] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0 [19863.029774] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [19863.061971] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [19863.078258] PM: noirq resume of devices complete after 175.241 msecs [19863.078363] PM: early resume of devices complete after 0.082 msecs [19863.078393] i915 0000:00:02.0: setting latency timer to 64 [19863.078399] xhci_hcd 0000:00:14.0: setting latency timer to 64 [19863.078422] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [19863.078464] e1000e 0000:00:19.0: System wakeup disabled by ACPI [19863.078473] e1000e 0000:00:19.0: setting latency timer to 64 [19863.078504] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [19863.078560] ahci 0000:00:1f.2: setting latency timer to 64 [19863.078740] ehci-pci 0000:00:1a.0: setting latency timer to 64 [19863.078882] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [19863.078967] ehci-pci 0000:00:1d.0: setting latency timer to 64 [19863.121812] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [19863.289973] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [19863.397981] ata2: SATA link down (SStatus 0 SControl 300) [19863.398007] ata5: SATA link down (SStatus 0 SControl 300) [19863.401982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [19863.454113] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci [19863.547915] btusb 1-1.4:1.0: no reset_resume for driver btusb? [19863.547918] btusb 1-1.4:1.1: no reset_resume for driver btusb? [19863.613052] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [19863.613056] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [19863.618267] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci [19863.633021] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [19863.633025] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [19863.643074] ata1.00: configured for UDMA/133 [19863.658222] sd 0:0:0:0: [sda] Starting disk [19863.826482] usb 3-4: reset high-speed USB device number 7 using xhci_hcd [19863.842450] usb 3-4: device firmware changed [19863.842549] PM: resume of devices complete after 763.678 msecs [19863.842806] ------------[ cut here ]------------ [19863.842812] WARNING: CPU: 0 PID: 3063 at /build/buildd/linux-3.11.0/drivers/base/firmware_class.c:1085 _request_firmware+0x948/0xa60() [19863.842843] Modules linked in: dm_crypt pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) parport_pc ppdev rfcomm bnep nfsd auth_rpcgss binfmt_misc nfs_acl nfs lockd sunrpc fscache x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev snd_hda_codec_hdmi snd_hda_codec_realtek cdc_mbim snd_hda_intel uvcvideo snd_hda_codec videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hwdep cdc_ncm thinkpad_acpi videodev cdc_acm usbnet cdc_wdm snd_pcm mii nvram btusb snd_seq_midi wacom snd_seq_midi_event bluetooth arc4 snd_page_alloc iwldvm mac80211 snd_rawmidi iwlwifi snd_seq snd_seq_device snd_timer psmouse cfg80211 snd mei_me microcode mei serio_raw soundcore lpc_ich tpm_tis mac_hid lp parport hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper e1000e ahci drm sdhci_pci libahci ptp sdhci pps_core wmi video [19863.842854] CPU: 0 PID: 3063 Comm: kworker/u17:2 Tainted: GF W O 3.11.0-18-generic #32-Ubuntu [19863.842854] Hardware name: LENOVO 34382AG/34382AG, BIOS GCET92WW (2.52 ) 02/25/2013 [19863.842867] Workqueue: hci0 hci_power_on [bluetooth] [19863.842871] 0000000000000009 ffff8800bcf77c78 ffffffff816e8571 0000000000000000 [19863.842876] ffff8800bcf77cb0 ffffffff81061e2d ffff8800bcf77d8c 00000000fffffff5 [19863.842880] ffff8800acb18620 ffff8800bcf77d80 0000000000000220 ffff8800bcf77cc0 [19863.842881] Call Trace: [19863.842886] [] dump_stack+0x45/0x56 [19863.842890] [] warn_slowpath_common+0x7d/0xa0 [19863.842893] [] warn_slowpath_null+0x1a/0x20 [19863.842896] [] _request_firmware+0x948/0xa60 [19863.842899] [] request_firmware+0x34/0x50 [19863.842903] [] btusb_setup_patchram+0x72/0x1c0 [btusb] [19863.842910] [] hci_dev_open+0x255/0x360 [bluetooth] [19863.842917] [] hci_power_on+0x31/0xf0 [bluetooth] [19863.842921] [] process_one_work+0x17c/0x430 [19863.842923] [] worker_thread+0x11c/0x3c0 [19863.842926] [] ? manage_workers.isra.25+0x2a0/0x2a0 [19863.842929] [] kthread+0xc0/0xd0 [19863.842932] [] ? kthread_create_on_node+0x120/0x120 [19863.842936] [] ret_from_fork+0x7c/0xb0 [19863.842939] [] ? kthread_create_on_node+0x120/0x120 [19863.842940] ---[ end trace 8bf3e4141028add8 ]--- [19863.842942] usb 1-1.4: firmware: fw-0a5c_21e6.hcd will not be loaded [19863.842944] Bluetooth: can't load firmware, may not work correctly [19863.842978] PM: Finishing wakeup. [19863.844447] usb 3-4: USB disconnect, device number 7 [19863.844843] cdc_ncm 3-4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:14.0-4, Mobile Broadband Network Device [19863.842979] Restarting tasks ... done. [19863.860118] video LNXVIDEO:00: Restoring backlight state [19863.887098] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375c00 [19863.887103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375c40 [19863.887105] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375e00 [19863.887107] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375e40 [19863.887109] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375780 [19863.887111] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800703757c0 [19863.887113] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43c980 [19863.887115] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375e80 [19863.887116] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880070375ec0 [19863.887118] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43c300 [19863.887120] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43c0c0 [19863.887122] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43c440 [19863.887124] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43c700 [19863.887126] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bb43ce00 [19864.054435] usb 3-4: new high-speed USB device number 8 using xhci_hcd [19864.070798] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1912 [19864.070807] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=5 [19864.070814] usb 3-4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w [19864.070819] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [19864.072052] usbhid 3-4:1.0: can't add hid device: -71 [19864.072069] usbhid: probe of 3-4:1.0 failed with error -71 [19864.072154] usb 3-4: USB disconnect, device number 8 [19864.356195] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [19864.458713] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [19864.459363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [19864.461200] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [19864.466737] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [19864.468177] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [19864.557593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [19865.083159] usb 3-4: new high-speed USB device number 9 using xhci_hcd [19865.105919] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1911 [19865.105927] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19865.105931] usb 3-4: Product: F5521gw [19865.105934] usb 3-4: Manufacturer: Lenovo [19865.105937] usb 3-4: SerialNumber: DB4367DBEE8CD7D0 [19865.141017] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [19865.143811] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [19865.152251] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [19865.167419] usb 3-4: MAC-Address: 02:80:37:ec:02:00 [19865.167863] cdc_ncm 3-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [19865.169116] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device [19865.169704] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [19865.663545] e1000e 0000:00:19.0: setting latency timer to 64 [19865.663588] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [19866.072787] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [19866.073069] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready [19871.008600] wlan0: authenticate with 00:1f:1f:cd:74:a0 [19871.011387] wlan0: send auth to 00:1f:1f:cd:74:a0 (try 1/3) [19871.038071] wlan0: authenticated [19871.039072] wlan0: associate with 00:1f:1f:cd:74:a0 (try 1/3) [19871.138249] wlan0: RX AssocResp from 00:1f:1f:cd:74:a0 (capab=0x401 status=0 aid=2) [19871.144739] wlan0: associated [19871.144815] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [19871.909688] IPv6: wlan0: IPv6 duplicate address fe80::863a:4bff:feae:8e8c detected!