[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-14-generic root=UUID=b67e01ec-1845-4d7a-a6c0-ba6df646e66e ro single
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[    0.000000]  BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[    0.000000]  BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-14-generic root=UUID=b67e01ec-1845-4d7a-a6c0-ba6df646e66e ro single
[    0.000000]   #38 [0001d53480 - 0001d534e4]         BOOTMEM
[    0.000000]   #39 [0001d53500 - 0001d53564]         BOOTMEM
[    0.000000] Detected 2333.067 MHz processor.
[    0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.13 BogoMIPS (lpj=23330670)
[    0.000014] pid_max: default: 32768 minimum: 301
[    0.000039] Security Framework initialized
[    0.000059] AppArmor: AppArmor initialized
[    0.000062] Yama: becoming mindful.
[    0.010716] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014125] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015687] Mount-cache hash table entries: 256
[    0.015832] Initializing cgroup subsys ns
[    0.015841] Initializing cgroup subsys cpuacct
[    0.015846] Initializing cgroup subsys memory
[    0.015855] Initializing cgroup subsys devices
[    0.015859] Initializing cgroup subsys freezer
[    0.015863] Initializing cgroup subsys net_cls
[    0.015892] CPU: Physical Processor ID: 0
[    0.015895] CPU: Processor Core ID: 0
[    0.015899] mce: CPU supports 6 MCE banks
[    0.015908] CPU0: Thermal monitoring enabled (TM2)
[    0.015914] using mwait in idle threads.
[    0.015917] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.015926] ... version:                2
[    0.015929] ... bit width:              40
[    0.015932] ... generic registers:      2
[    0.015935] ... value mask:             000000ffffffffff
[    0.015938] ... max period:             000000007fffffff
[    0.015941] ... fixed-purpose events:   3
[    0.015944] ... event mask:             0000000700000003
[    0.018446] ACPI: Core revision 20100428
[    0.030016] ftrace: allocating 22642 entries in 89 pages
[    0.040054] Setting APIC routing to flat
[    0.040361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.140421] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.650012] Total of 4 processors activated (18664.57 BogoMIPS).
[    0.651428] devtmpfs: initialized
[    0.651428] regulator: core version 0.5
[    0.651428] Time: 18:07:01  Date: 08/11/10
[    0.651428] NET: Registered protocol family 16
[    0.651428] ACPI: bus type pci registered
[    0.651428] Trying to unpack rootfs image as initramfs...
[    0.651428] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.651428] PCI: not using MMCONFIG
[    0.651428] PCI: Using configuration type 1 for base access
[    0.651523] bio: create slab <bio-0> at 0
[    0.651523] ACPI: EC: Look up EC in DSDT
[    0.652703] ACPI: Executed 1 blocks of module-level executable AML code
[    0.667349] ACPI: Interpreter enabled
[    0.667354] ACPI: (supports S0 S1 S3 S4 S5)
[    0.667377] ACPI: Using IOAPIC for interrupt routing
[    0.667431] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.669366] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.716720] ACPI Warning: Incorrect checksum in table [OEMB] - 0xCE, should be 0xCD (20100428/tbutils-314)
[    0.716901] ACPI: No dock devices found.
[    0.716905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.717053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.717341] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.717346] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.717351] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.717355] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.717360] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
[    0.717365] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.717432] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.717435] pci 0000:00:01.0: PME# disabled
[    0.717492] pci 0000:00:1a.0: reg 20: [io  0x9800-0x981f]
[    0.717549] pci 0000:00:1a.1: reg 20: [io  0x9880-0x989f]
[    0.717606] pci 0000:00:1a.2: reg 20: [io  0x9c00-0x9c1f]
[    0.717662] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[    0.717709] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.717714] pci 0000:00:1a.7: PME# disabled
[    0.717742] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[    0.717778] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.717782] pci 0000:00:1b.0: PME# disabled
[    0.717839] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.717843] pci 0000:00:1c.0: PME# disabled
[    0.717902] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.717905] pci 0000:00:1c.4: PME# disabled
[    0.717964] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.717968] pci 0000:00:1c.5: PME# disabled
[    0.718011] pci 0000:00:1d.0: reg 20: [io  0x9080-0x909f]
[    0.718068] pci 0000:00:1d.1: reg 20: [io  0x9400-0x941f]
[    0.718127] pci 0000:00:1d.2: reg 20: [io  0x9480-0x949f]
[    0.718183] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[    0.718231] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.718235] pci 0000:00:1d.7: PME# disabled
[    0.718337] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.718344] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.718349] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.718401] pci 0000:00:1f.2: reg 10: [io  0x8c00-0x8c07]
[    0.718406] pci 0000:00:1f.2: reg 14: [io  0x8880-0x8883]
[    0.718411] pci 0000:00:1f.2: reg 18: [io  0x8800-0x8807]
[    0.718416] pci 0000:00:1f.2: reg 1c: [io  0x8480-0x8483]
[    0.718421] pci 0000:00:1f.2: reg 20: [io  0x8400-0x841f]
[    0.718426] pci 0000:00:1f.2: reg 24: [mem 0xf9ffe800-0xf9ffefff]
[    0.718453] pci 0000:00:1f.2: PME# supported from D3hot
[    0.718456] pci 0000:00:1f.2: PME# disabled
[    0.718481] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[    0.718493] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.718546] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.718554] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.718561] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.718566] pci 0000:01:00.0: reg 24: [io  0xac00-0xac7f]
[    0.718571] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
[    0.718609] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.718614] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.718617] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.718621] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.718657] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.718663] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.718667] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.718672] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.718774] pci 0000:03:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
[    0.718783] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.718812] pci 0000:03:00.0: PME# supported from D3hot
[    0.718817] pci 0000:03:00.0: PME# disabled
[    0.718861] pci 0000:03:00.1: reg 10: [io  0xcc00-0xcc07]
[    0.718869] pci 0000:03:00.1: reg 14: [io  0xc880-0xc883]
[    0.718878] pci 0000:03:00.1: reg 18: [io  0xc800-0xc807]
[    0.718886] pci 0000:03:00.1: reg 1c: [io  0xc480-0xc483]
[    0.718894] pci 0000:03:00.1: reg 20: [io  0xc400-0xc40f]
[    0.718951] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.718967] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.718972] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.718976] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.718981] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.719047] pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.719055] pci 0000:02:00.0: reg 18: [io  0xbc00-0xbc7f]
[    0.719108] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.719113] pci 0000:02:00.0: PME# disabled
[    0.719132] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.719144] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.719149] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.719153] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.719158] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.719202] pci 0000:05:00.0: reg 10: [io  0xe880-0xe8bf]
[    0.719243] pci 0000:05:00.0: supports D1 D2
[    0.719267] pci 0000:05:00.1: reg 10: [io  0xec00-0xec07]
[    0.719307] pci 0000:05:00.1: supports D1 D2
[    0.719334] pci 0000:05:00.2: reg 10: [mem 0xfebff800-0xfebfffff]
[    0.719340] pci 0000:05:00.2: reg 14: [mem 0xfebf8000-0xfebfbfff]
[    0.719379] pci 0000:05:00.2: supports D1 D2
[    0.719380] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot
[    0.719384] pci 0000:05:00.2: PME# disabled
[    0.719419] pci 0000:05:01.0: reg 10: [io  0xe800-0xe80f]
[    0.719426] pci 0000:05:01.0: reg 14: [io  0xe480-0xe48f]
[    0.719432] pci 0000:05:01.0: reg 18: [io  0xe400-0xe40f]
[    0.719439] pci 0000:05:01.0: reg 1c: [io  0xe080-0xe08f]
[    0.719445] pci 0000:05:01.0: reg 20: [io  0xe000-0xe01f]
[    0.719451] pci 0000:05:01.0: reg 24: [io  0xd800-0xd8ff]
[    0.719457] pci 0000:05:01.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[    0.719514] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.719520] pci 0000:00:1e.0:   bridge window [io  0xd000-0xefff]
[    0.719523] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.719528] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.719531] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.719533] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.719535] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.719538] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.719540] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.719542] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.719562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.719686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.719741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.719851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.719915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.720018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.735503] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.735616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.735728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.735840] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.735951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.736064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.736175] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.736286] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.736336] HEST: Table is not found!
[    0.736414] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.736423] vgaarb: loaded
[    0.736551] SCSI subsystem initialized
[    0.736570] libata version 3.00 loaded.
[    0.736570] usbcore: registered new interface driver usbfs
[    0.736570] usbcore: registered new interface driver hub
[    0.736570] usbcore: registered new device driver usb
[    0.736570] ACPI: WMI: Mapper loaded
[    0.736570] PCI: Using ACPI for IRQ routing
[    0.736570] PCI: pci_cache_line_size set to 64 bytes
[    0.736570] reserve RAM buffer: 000000000009e400 - 000000000009ffff 
[    0.736570] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff 
[    0.736570] NetLabel: Initializing
[    0.736570] NetLabel:  domain hash size = 128
[    0.736570] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.736570] NetLabel:  unlabeled traffic allowed by default
[    0.736570] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.736570] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.736570] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.750155] Switching to clocksource tsc
[    0.758703] AppArmor: AppArmor Filesystem Enabled
[    0.758728] pnp: PnP ACPI init
[    0.758752] ACPI: bus type pnp registered
[    0.761767] pnp: PnP ACPI: found 15 devices
[    0.761772] ACPI: ACPI bus type pnp unregistered
[    0.761786] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.761794] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.761801] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.761805] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.761810] system 00:07: [io  0x0500-0x057f] could not be reserved
[    0.761814] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.761819] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.761823] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.761828] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.761835] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[    0.761842] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.761846] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.761853] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.761860] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.761864] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
[    0.761869] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.761873] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.761878] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.766600] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    0.766606] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.766612] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.766617] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.766622] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.766626] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.766632] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.766637] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.766643] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.766647] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.766653] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.766658] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.766666] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.766671] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.766676] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.766682] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.766690] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.766694] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.766700] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.766705] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.766714] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.766718] pci 0000:00:1e.0:   bridge window [io  0xd000-0xefff]
[    0.766724] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.766729] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.766742]   alloc irq_desc for 16 on node -1
[    0.766744]   alloc kstat_irqs on node -1
[    0.766749] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.766755] pci 0000:00:01.0: setting latency timer to 64
[    0.766762] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.766767]   alloc irq_desc for 17 on node -1
[    0.766768]   alloc kstat_irqs on node -1
[    0.766771] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.766777] pci 0000:00:1c.0: setting latency timer to 64
[    0.766784] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.766789] pci 0000:00:1c.4: setting latency timer to 64
[    0.766796] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.766801] pci 0000:00:1c.5: setting latency timer to 64
[    0.766807] pci 0000:00:1e.0: setting latency timer to 64
[    0.766810] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.766812] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.766814] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.766816] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.766818] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.766820] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.766823] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.766825] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[    0.766827] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.766829] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.766831] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.766833] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.766835] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.766837] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.766839] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.766842] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.766844] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.766846] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.766848] pci_bus 0000:05: resource 0 [io  0xd000-0xefff]
[    0.766850] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.766852] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.766854] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.766856] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.766858] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.766860] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.766862] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[    0.766897] NET: Registered protocol family 2
[    0.767120] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.768425] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.771779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.772192] TCP: Hash tables configured (established 524288 bind 65536)
[    0.772197] TCP reno registered
[    0.772216] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.772282] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.772447] NET: Registered protocol family 1
[    0.772623] pci 0000:01:00.0: Boot video device
[    0.772643] PCI: CLS 32 bytes, default 64
[    0.772645] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.772650] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[    0.772655] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[    0.772940] Scanning for low memory corruption every 60 seconds
[    0.773071] audit: initializing netlink socket (disabled)
[    0.773085] type=2000 audit(1281550020.760:1): initialized
[    0.786319] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.787547] VFS: Disk quotas dquot_6.5.2
[    0.787600] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.788086] fuse init (API version 7.14)
[    0.788158] msgmni has been set to 15964
[    0.788389] alg: No test for stdrng (krng)
[    0.788435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.788442] io scheduler noop registered
[    0.788445] io scheduler deadline registered
[    0.788479] io scheduler cfq registered (default)
[    0.788582] pcieport 0000:00:01.0: setting latency timer to 64
[    0.788603]   alloc irq_desc for 40 on node -1
[    0.788605]   alloc kstat_irqs on node -1
[    0.788614] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.788662] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.788687]   alloc irq_desc for 41 on node -1
[    0.788692]   alloc kstat_irqs on node -1
[    0.788698] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.788760] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.788786]   alloc irq_desc for 42 on node -1
[    0.788788]   alloc kstat_irqs on node -1
[    0.788793] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.788861] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.788887]   alloc irq_desc for 43 on node -1
[    0.788889]   alloc kstat_irqs on node -1
[    0.788895] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.788974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.789061] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.789333] vesafb: framebuffer at 0xfb12c000, mapped to 0xffffc90011800000, using 1216k, total 1216k
[    0.789339] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.789342] vesafb: scrolling: redraw
[    0.789345] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.798001] Console: switching to colour frame buffer device 80x30
[    0.806838] fb0: VESA VGA frame buffer device
[    0.807123] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.807471] ACPI: Power Button [PWRB]
[    0.807658] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.811142] ACPI: Power Button [PWRF]
[    0.813363] ACPI: acpi_idle registered with cpuidle
[    0.815900] ERST: Table is not found!
[    0.819094] Linux agpgart interface v0.103
[    0.821336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.823909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.826877] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.830673] brd: module loaded
[    0.833984] loop: module loaded
[    0.837145] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.843834] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.843847] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.847732] Fixed MDIO Bus: probed
[    0.851507] PPP generic driver version 2.4.2
[    0.855424] tun: Universal TUN/TAP device driver, 1.6
[    0.859491] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.863885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.868435]   alloc irq_desc for 18 on node -1
[    0.868437]   alloc kstat_irqs on node -1
[    0.868444] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.873246] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.873249] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.878109] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.888235] ehci_hcd 0000:00:1a.7: debug port 1
[    0.897465] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.897481] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.919674] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.925175] hub 1-0:1.0: USB hub found
[    0.930478] hub 1-0:1.0: 6 ports detected
[    0.935681]   alloc irq_desc for 23 on node -1
[    0.935683]   alloc kstat_irqs on node -1
[    0.935687] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.940937] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.940940] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.946106] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.956092] ehci_hcd 0000:00:1d.7: debug port 1
[    0.964999] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.965012] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.989673] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.994796] hub 2-0:1.0: USB hub found
[    0.995312] Freeing initrd memory: 16708k freed
[    1.006308] hub 2-0:1.0: 6 ports detected
[    1.011155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.016044] uhci_hcd: USB Universal Host Controller Interface driver
[    1.021078] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.026077] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.026080] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.030962] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.040629] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[    1.045725] hub 3-0:1.0: USB hub found
[    1.050681] hub 3-0:1.0: 2 ports detected
[    1.055575]   alloc irq_desc for 21 on node -1
[    1.055577]   alloc kstat_irqs on node -1
[    1.055580] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.060558] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.060561] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.065409] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.075078] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[    1.080062] hub 4-0:1.0: USB hub found
[    1.084908] hub 4-0:1.0: 2 ports detected
[    1.089760] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.094830] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.094833] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.099795] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.109804] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
[    1.115013] hub 5-0:1.0: USB hub found
[    1.120088] hub 5-0:1.0: 2 ports detected
[    1.125033] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.130143] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.130146] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.135231] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.145429] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[    1.150788] hub 6-0:1.0: USB hub found
[    1.155991] hub 6-0:1.0: 2 ports detected
[    1.161151]   alloc irq_desc for 19 on node -1
[    1.161152]   alloc kstat_irqs on node -1
[    1.161157] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.166416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.166419] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.171589] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.181872] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[    1.187151] hub 7-0:1.0: USB hub found
[    1.192265] hub 7-0:1.0: 2 ports detected
[    1.197317] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.202720] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.202723] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.207884] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.218176] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[    1.223496] hub 8-0:1.0: USB hub found
[    1.228598] hub 8-0:1.0: 2 ports detected
[    1.233731] PNP: No PS/2 controller found. Probing ports directly.
[    1.241395] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.246553] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.251610] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.251659] mice: PS/2 mouse device common for all mice
[    1.251729] rtc_cmos 00:03: RTC can wake from S4
[    1.251760] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.251782] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.251861] device-mapper: uevent: version 1.0.3
[    1.252032] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    1.252212] device-mapper: multipath: version 1.1.1 loaded
[    1.252230] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.252668] cpuidle: using governor ladder
[    1.252670] cpuidle: using governor menu
[    1.252937] TCP cubic registered
[    1.253045] NET: Registered protocol family 10
[    1.253385] lo: Disabled Privacy Extensions
[    1.253551] NET: Registered protocol family 17
[    1.333601] PM: Resume from disk failed.
[    1.333614] registered taskstats version 1
[    1.338743]   Magic number: 6:811:139
[    1.343536] block ram4: hash matches
[    1.348352] acpi device:10: hash matches
[    1.353099] rtc_cmos 00:03: setting system clock to 2010-08-11 18:07:01 UTC (1281550021)
[    1.362731] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.367649] EDD information not available.
[    1.372558] Freeing unused kernel memory: 908k freed
[    1.377636] Write protecting the kernel read-only data: 10240k
[    1.382843] Freeing unused kernel memory: 416k freed
[    1.388030] Freeing unused kernel memory: 1604k freed
[    1.414582] ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
[    1.425152] ramzswap: Unknown parameter `disksize_kb'
[    1.491103] udev: starting version 151
[    1.527658] sata_via 0000:05:01.0: version 2.6
[    1.527677] sata_via 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.528118] ahci 0000:00:1f.2: version 3.0
[    1.528129] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.539303] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.539317] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.549177] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.564561] sata_via 0000:05:01.0: routed to hard irq line 11
[    1.567406]   alloc irq_desc for 44 on node -1
[    1.567409]   alloc kstat_irqs on node -1
[    1.567423] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.567480] ahci: SSS flag set, parallel bus scan disabled
[    1.567518] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.567521] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    1.567525] ahci 0000:00:1f.2: setting latency timer to 64
[    1.568434] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.568522] scsi0 : pata_jmicron
[    1.569047] scsi1 : pata_jmicron
[    1.569632] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[    1.569635] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[    1.625257] scsi2 : sata_via
[    1.631116] scsi3 : sata_via
[    1.636859] scsi4 : sata_via
[    1.642531] ata3: SATA max UDMA/133 port i16@0xe800 bmdma 0xe000 irq 17
[    1.648250] ata4: SATA max UDMA/133 port i16@0xe480 bmdma 0xe008 irq 17
[    1.653794] ata5: PATA max UDMA/133 port i16@0xe400 bmdma 0xe010 irq 17
[    1.659334] firewire_ohci 0000:05:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.671319] scsi5 : ahci
[    1.676610] scsi6 : ahci
[    1.681704] scsi7 : ahci
[    1.686545] scsi8 : ahci
[    1.691126] scsi9 : ahci
[    1.695481] scsi10 : ahci
[    1.699810] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 44
[    1.708331] ata7: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 44
[    1.716934] ata8: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 44
[    1.725634] ata9: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 44
[    1.734647] ata10: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 44
[    1.734668] firewire_ohci: Added fw-ohci device 0000:05:00.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
[    1.752878] ata11: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 44
[    1.763204] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.773058] ata1.00: ATAPI: Optiarc DVD RW AD-7173A, 1-O3, max UDMA/66
[    1.778263] ata1.01: ATAPI: _NEC DVD_RW ND-4570A, 1.03, max UDMA/33
[    1.780042] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.780045] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.780051] ahci 0000:03:00.0: setting latency timer to 64
[    1.780195] scsi11 : ahci
[    1.780270] scsi12 : ahci
[    1.780346] ata12: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    1.780349] ata13: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    1.873050] ata1.00: configured for UDMA/66
[    1.913049] ata1.01: configured for UDMA/33
[    1.922048] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7173A  1-O3 PQ: 0 ANSI: 5
[    1.937615] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.950572] Uniform CD-ROM driver Revision: 3.20
[    1.957344] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.957404] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.963437] Initializing USB Mass Storage driver...
[    1.963572] scsi13 : usb-storage 1-3:1.0
[    1.963659] usbcore: registered new interface driver usb-storage
[    1.963660] USB Mass Storage support registered.
[    1.989708] scsi 0:0:1:0: CD-ROM            _NEC     DVD_RW ND-4570A  1.03 PQ: 0 ANSI: 5
[    2.012476] ata3: SATA link down (SStatus 0 SControl 310)
[    2.020409] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.032188] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    2.032264] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.130026] ata13: SATA link down (SStatus 0 SControl 300)
[    2.131273] ata12: SATA link down (SStatus 0 SControl 300)
[    2.232572] firewire_core: created device fw0: GUID 00023c0151106c70, S400
[    2.291261] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.301866] ata6.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[    2.307464] ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.318095] ata6.00: configured for UDMA/133
[    2.560900] ata4: SATA link down (SStatus 0 SControl 310)
[    2.720010] usb 6-1: new full speed USB device using uhci_hcd and address 2
[    2.741833] ata5.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
[    2.747525] ata5.00: 398297088 sectors, multi 16: LBA48 
[    2.780484] ata5.00: configured for UDMA/133
[    2.786108] scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6Y200P0   YAR4 PQ: 0 ANSI: 5
[    2.797640] sd 4:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[    2.797650] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.797774] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.797899] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.797938] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    2.797947] sd 5:0:0:0: [sdb] Write Protect is off
[    2.797950] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.797970] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.798130]  sdb: sdb1 sdb2
[    2.861764] sd 4:0:0:0: [sda] Write Protect is off
[    2.861766] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.861787] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.884365]  sdb3
[    2.889915]  sda:
[    2.898761] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.910660]  sda1
[    2.916308] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.979083] scsi 13:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    2.996057] scsi 13:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    3.013187] scsi 13:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    3.030310] scsi 13:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    3.042018] sd 13:0:0:0: Attached scsi generic sg4 type 0
[    3.047803] sd 13:0:0:1: Attached scsi generic sg5 type 0
[    3.053383] sd 13:0:0:2: Attached scsi generic sg6 type 0
[    3.058715] sd 13:0:0:3: Attached scsi generic sg7 type 0
[    3.065183] sd 13:0:0:0: [sdc] Attached SCSI removable disk
[    3.071563] sd 13:0:0:1: [sdd] Attached SCSI removable disk
[    3.076919] sd 13:0:0:2: [sde] Attached SCSI removable disk
[    3.082178] sd 13:0:0:3: [sdf] Attached SCSI removable disk
[    3.193759] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    3.660012] usb 7-2: new full speed USB device using uhci_hcd and address 3
[    3.723762] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.729834] ata7.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[    3.734206] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.739628] ata7.00: configured for UDMA/133
[    3.760109] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[    3.769203] sd 6:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.769208] sd 6:0:0:0: Attached scsi generic sg8 type 0
[    3.783627] sd 6:0:0:0: [sdg] Write Protect is off
[    3.788539] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    3.788560] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.798549]  sdg: sdg1
[    3.814684] sd 6:0:0:0: [sdg] Attached SCSI disk
[    4.130012] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    4.373403] usbcore: registered new interface driver hiddev
[    4.391699] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[    4.401356] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0
[    4.442510] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3
[    4.453247] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1
[    4.464822] usbcore: registered new interface driver usbhid
[    4.470815] usbhid: USB HID core driver
[    4.603760] usb 8-2: new low speed USB device using uhci_hcd and address 3
[    4.710016] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.727245] ata8.00: HPA unlocked: 586112591 -> 586114704, native 586114704
[    4.733848] ata8.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
[    4.740383] ata8.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
[    4.749872] ata8.00: configured for UDMA/133
[    4.770112] scsi 7:0:0:0: Direct-Access     ATA      Maxtor 6L300S0   BANC PQ: 0 ANSI: 5
[    4.783091] sd 7:0:0:0: [sdh] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[    4.783173] sd 7:0:0:0: Attached scsi generic sg9 type 0
[    4.802433] sd 7:0:0:0: [sdh] Write Protect is off
[    4.808849] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[    4.808871] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.821903]  sdh:
[    4.836693] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[    4.845646]  sdh1
[    4.862384] generic-usb 0003:045E:0047.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[    4.862747] sd 7:0:0:0: [sdh] Attached SCSI disk
[    5.721262] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.728590] ata9.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
[    5.735026] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.742331] ata9.00: configured for UDMA/133
[    5.760092] scsi 8:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[    5.772532] sd 8:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.785002] sd 8:0:0:0: Attached scsi generic sg10 type 0
[    5.785071] sd 8:0:0:0: [sdi] Write Protect is off
[    5.785074] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[    5.785094] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.785216]  sdi: sdi1
[    5.815702] sd 8:0:0:0: [sdi] Attached SCSI disk
[    6.152514] ata10: SATA link down (SStatus 0 SControl 300)
[    7.100016] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.110031] ata11.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
[    7.115868] ata11.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    7.125920] ata11.00: configured for UDMA/133
[    7.152583] scsi 10:0:0:0: Direct-Access     ATA      SAMSUNG HD401LJ  ZZ10 PQ: 0 ANSI: 5
[    7.164436] sd 10:0:0:0: [sdj] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    7.164537] sd 10:0:0:0: Attached scsi generic sg11 type 0
[    7.182602] sd 10:0:0:0: [sdj] Write Protect is off
[    7.188503] sd 10:0:0:0: [sdj] Mode Sense: 00 3a 00 00
[    7.188524] sd 10:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.200272]  sdj: sdj1
[    7.209738] sd 10:0:0:0: [sdj] Attached SCSI disk
[    7.629488] xor: automatically using best checksumming function: generic_sse
[    7.673753]    generic_sse:  8686.400 MB/sec
[    7.673926] xor: using function: generic_sse (8686.400 MB/sec)
[    7.676174] device-mapper: dm-raid45: initialized v0.2594b
[    8.040695] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[    8.040974] EXT4-fs (sdb2): write access will be enabled during recovery
[    8.105683] EXT4-fs (sdb2): recovery complete
[    8.106157] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   19.646457] udev: starting version 151
[   19.657951] lp: driver loaded but no devices found
[   19.729898] Adding 5858300k swap on /dev/sdb1.  Priority:-1 extents:1 across:5858300k 
[   19.798063] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x106D
[   19.798089] usbcore: registered new interface driver usblp
[   19.841297] Linux video capture interface: v2.00
[   19.845858] gspca: main v2.9.0 registered
[   19.846878] gspca: probing 041e:4053
[   19.846881] zc3xx: Sensor Tas5130 (VF0250)
[   19.851257] input: zc3xx as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/input/input5
[   19.851409] gspca: video0 created
[   19.851412] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[   19.851484] usbcore: registered new interface driver zc3xx
[   19.851486] zc3xx: registered
[   19.853038] gameport gameport0: EMU10K1 is pci0000:05:00.1/gameport0, io 0xec00, speed 1020kHz
[   19.915815]   alloc irq_desc for 22 on node -1
[   19.915819]   alloc kstat_irqs on node -1
[   19.915828] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   19.915885]   alloc irq_desc for 45 on node -1
[   19.915887]   alloc kstat_irqs on node -1
[   19.915895] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   19.915921] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   19.959809] EMU10K1_Audigy 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.963815] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[   19.981571] usbcore: registered new interface driver snd-usb-audio
[   19.995444] type=1400 audit(1281550040.138:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=865 comm="apparmor_parser"
[   19.996070] type=1400 audit(1281550040.138:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser"
[   19.996403] type=1400 audit(1281550040.138:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser"
[   20.015065] hda_codec: ALC1200: BIOS auto-probing.
[   20.072115] [drm] Initialized drm 1.1.0 20060810
[   20.197265] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.197271] nouveau 0000:01:00.0: setting latency timer to 64
[   20.201145] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086100a2)
[   20.201149] checking generic (fb12c000 130000) vs hw (d0000000 10000000)
[   20.201151] checking generic (fb12c000 130000) vs hw (fa000000 2000000)
[   20.201153] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   20.201541] Console: switching to colour dummy device 80x25
[   20.208029] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   20.256008] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   20.256012] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   20.256015] [drm] nouveau 0000:01:00.0: Bios version 60.86.39.00
[   20.256018] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[   20.256020] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[   20.256022] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   20.256025] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000310 00000028
[   20.256028] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[   20.256030] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011302 00000030
[   20.256032] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080
[   20.256034] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[   20.256037] [drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[   20.256040] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[   20.256042] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   20.256044] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   20.256047] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   20.256054] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBD6B
[   20.331850] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC091
[   20.411258] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCCD2
[   20.411265] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCDC4
[   20.428070] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCFB1
[   20.428073] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD016
[   20.450062] [drm] nouveau 0000:01:00.0: 0xD016: Condition still not met after 20ms, skipping following opcodes
[   20.450069] [drm] nouveau 0000:01:00.0: 0xAFF4: parsing output script 0
[   20.450072] [drm] nouveau 0000:01:00.0: 0xA66A: parsing output script 0
[   20.450078] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[   20.522330] [TTM] Zone  kernel: Available graphics memory: 4096812 kiB.
[   20.522332] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[   20.522334] [TTM] Initializing pool allocator.
[   20.537075] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   20.537083] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   20.537292] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[   20.540600] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[   20.541308] [drm] nouveau 0000:01:00.0: Detected a DAC output
[   20.541311] [drm] nouveau 0000:01:00.0: Detected a DAC output
[   20.541314] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[   20.541316] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[   20.541318] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[   20.541406] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[   20.541483] [drm] nouveau 0000:01:00.0: Detected a TV connector
[   20.541510] [drm] nouveau 0000:01:00.0:   no encoders, ignoring
[   20.664394] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[   20.724142] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40250000, bo ffff880215646c00
[   20.724560] Console: switching to colour frame buffer device 210x65
[   20.725016] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
[   20.725036] [drm] nouveau 0000:01:00.0: 0xAFF8: parsing output script 1
[   20.725057] [drm] nouveau 0000:01:00.0: 0x8197: parsing clock script 0
[   20.726356] fb0: nouveaufb frame buffer device
[   20.726358] drm: registered panic notifier
[   20.726361] Slow work thread pool: Starting up
[   20.726447] Slow work thread pool: Ready
[   20.726459] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   20.798795] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[   20.955804] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   20.971759] EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
[   20.984500] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
[   20.995193] EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
[   21.305728]   alloc irq_desc for 46 on node -1
[   21.305732]   alloc kstat_irqs on node -1
[   21.305750] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[   21.305894] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   21.306738] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.307607] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.312134] type=1400 audit(1281550041.448:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1277 comm="apparmor_parser"
[   21.312373] type=1400 audit(1281550041.448:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1278 comm="apparmor_parser"
[   21.312993] type=1400 audit(1281550041.448:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1278 comm="apparmor_parser"
[   21.313335] type=1400 audit(1281550041.448:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1278 comm="apparmor_parser"
[   21.314219] type=1400 audit(1281550041.458:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1282 comm="apparmor_parser"
[   21.314979] type=1400 audit(1281550041.458:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1282 comm="apparmor_parser"
[   21.315829] type=1400 audit(1281550041.458:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1281 comm="apparmor_parser"
[   31.500008] eth0: no IPv6 routers present
[   64.053005] ata5.00: configured for UDMA/133
[   64.053012] ata5: EH complete
[   64.230872] ata6.00: configured for UDMA/133
[   64.230881] ata6: EH complete
[   64.441953] ata7.00: configured for UDMA/133
[   64.441959] ata7: EH complete
[   64.486834] ata8.00: configured for UDMA/133
[   64.486838] ata8: EH complete
[   64.668305] ata9.00: configured for UDMA/133
[   64.668309] ata9: EH complete
[   64.737769] ata11.00: configured for UDMA/133
[   64.737776] ata11: EH complete
[   65.182555] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   65.185583] EXT4-fs (sdg1): re-mounted. Opts: commit=0
[   65.717813] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[   66.022459] EXT4-fs (sda1): re-mounted. Opts: commit=0
[   66.080665] EXT4-fs (sdj1): re-mounted. Opts: commit=0
[   66.130083] EXT4-fs (sdh1): re-mounted. Opts: commit=0
[   66.134255] EXT4-fs (sdi1): re-mounted. Opts: commit=0