There you go (please help) (I have to add that the test page is being printed without any problems): " > caelinux@piotr-laptop:~$ hp-check -t > > HP Linux Imaging and Printing System (ver. 3.9.8) > Dependency/Version Check Utility ver. 14.3 > > Copyright (c) 2001-9 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Note: hp-check can be run in three modes: > 1. Compile-time check mode (-c or --compile): Use this mode before > compiling the > HPLIP supplied tarball (.tar.gz or .run) to determine if the proper > dependencies > are installed to successfully compile HPLIP. > 2. Run-time check mode (-r or --run): Use this mode to determine if a > distro > supplied package (.deb, .rpm, etc) or an already built HPLIP supplied > tarball > has the proper dependencies installed to successfully run. > 3. Both compile- and run-time check mode (-b or --both) (Default): This > mode > will check both of the above cases (both compile- and run-time > dependencies). > > Saving output in log file: hp-check.log > > Initializing. Please wait... > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux piotr-laptop 2.6.24-25-generic #1 SMP Tue Oct 20 06:49:12 UTC 2009 > x86_64 GNU/Linux > > Distribution: > ubuntu 8.04 > > Checking Python version... > OK, version 2.5.2 installed > > Checking PyQt 4.x version... > OK, version 4.3.3 installed. > > Checking for CUPS... > Status: scheduler is running > Version: 1.3.7 > error_log is set to level: warn > > Checking for dbus/python-dbus... > dbus daemon is running. > python-dbus version: 0.82.4 > > > ------------------------------------ > | COMPILE AND RUNTIME DEPENDENCIES | > ------------------------------------ > > note: To check for compile-time only dependencies, re-run hp-check with > the -c parameter (ie, hp-check -c). > note: To check for run-time only dependencies, re-run hp-check with the > -r parameter (ie, hp-check -r). > > Checking for dependency: CUPS - Common Unix Printing System... > OK, found. > > Checking for dependency: CUPS DDK - CUPS driver development kit... > OK, found. > > Checking for dependency: CUPS devel- Common Unix Printing System > development files... > OK, found. > > Checking for dependency: CUPS image - CUPS image development files... > OK, found. > > Checking for dependency: DBus - Message bus system... > OK, found. > > Checking for dependency: gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency: GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency: libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency: libjpeg - JPEG library... > OK, found. > > Checking for dependency: libnetsnmp-devel - SNMP networking library > development files... > OK, found. > > Checking for dependency: libpthread - POSIX threads library... > OK, found. > > Checking for dependency: libtool - Library building support services... > OK, found. > > Checking for dependency: libusb - USB library... > OK, found. > > Checking for dependency: make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency: PIL - Python Imaging Library (required for > commandline scanning with hp-scan)... > OK, found. > > Checking for dependency: PolicyKit - Administrative policy framework... > OK, found. > > Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... > OK, found. > > Checking for dependency: Python DBus - Python bindings for DBus... > OK, found. > > Checking for dependency: Python devel - Python development files... > OK, found. > > Checking for dependency: Python libnotify - Python bindings for the > libnotify Desktop notifications... > OK, found. > > Checking for dependency: Python XML libraries... > OK, found. > > Checking for dependency: Python 2.3 or greater - Required for fax > functionality... > OK, found. > > Checking for dependency: Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency: Reportlab - PDF library for Python... > OK, found. > > Checking for dependency: SANE - Scanning library... > OK, found. > > Checking for dependency: SANE - Scanning library development files... > OK, found. > > Checking for dependency: scanimage - Shell scanning program... > OK, found. > > Checking for dependency: xsane - Graphical scanner frontend for SANE... > OK, found. > > > ---------------------- > | HPLIP INSTALLATION | > ---------------------- > > > Currently installed HPLIP version... > HPLIP 3.9.8 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf. Generated from hplip.conf.in by configure. > > [hplip] > version=3.9.8 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > ppdbase=/usr/share/ppd > doc=/usr/share/doc/hplip-3.9.8 > icon=/usr/share/applications > cupsbackend=/usr/lib/cups/backend > cupsfilter=/usr/lib/cups/filter > drv=/usr/share/cups/drv/hp > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=yes > pp-build=no > gui-build=yes > scanner-build=yes > fax-build=yes > dbus-build=yes > cups11-build=no > doc-build=yes > shadow-build=no > hpijs-install=no > foomatic-drv-install=no > foomatic-ppd-install=no > foomatic-rip-hplip-install=no > hpcups-install=yes > cups-drv-install=no > cups-ppd-install=yes > internal-tag=3.9.8.36 > restricted-build=no > ui-toolkit=qt4 > qt3=no > qt4=yes > policy-kit=yes > hpijs-only-build=no > lite-build=no > udev-acl-rules=no > > > Current contents of '/var/lib/hp/hplip.state' file: > # hplip.state - HPLIP runtime persistent variables. > > [plugin] > installed=0 > eula=0 > > > Current contents of '~/.hplip/hplip.conf' file: > [last_used] > printer_name = > working_dir = . > device_uri = "hp:/usb/Deskjet_F4200_series?serial=CN96P580TY05BR" > > [commands] > scan = /usr/bin/xsane -V %SANE_URI% > > [installation] > version = 3.9.8.36 > date_time = 11/01/2009 15:23:09 > > [settings] > systray_messages = 0 > systray_visible = 0 > > [fax] > email_address = > voice_phone = > > [refresh] > rate = 30 > enable = false > type = 1 > > [polling] > enable = false > device_list = > interval = 5 > > > -------------------------- > | DISCOVERED USB DEVICES | > -------------------------- > > Device URI Model > -------------------------------- ----------------------- > hp:/usb/Deskjet_F4200_series?ser HP Deskjet F4200 series > ial=CN96P580TY05BR > > --------------------------------- > | INSTALLED CUPS PRINTER QUEUES | > --------------------------------- > > > Deskjet_F4200 > ------------- > Type: Printer > Device URI: hp:/usb/Deskjet_F4200_series?serial=CN96P580TY05BR > PPD: /etc/cups/ppd/Deskjet_F4200.ppd > PPD Description: HP Deskjet f4200 Series, hpcups 3.9.8.36 > Printer status: printer Deskjet_F4200 is idle. enabled since Sun 01 Nov > 2009 01:12:14 PM KST > > HP Linux Imaging and Printing System (ver. 3.9.8) > System Tray Status Service ver. 2.0 > > Copyright (c) 2001-9 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Communication status: Good > > Deskjet_F4200_series > -------------------- > Type: Printer > Device URI: hp:/usb/Deskjet_F4200_series?serial=CN96P580TY05BR > PPD: /etc/cups/ppd/Deskjet_F4200_series.ppd > PPD Description: HP DeskJet F4100 Foomatic/hpijs, hpijs 2.8.2 > Printer status: printer Deskjet_F4200_series is idle. enabled since Sun > 01 Nov 2009 01:/usr/lib/cups/backend/hp failed > Communication status: Good > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in '/etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > device `hpaio:/usb/Deskjet_F4200_series?serial=CN96P580TY05BR' is a > Hewlett-Packard Deskjet_F4200_series all-in-one > device `hpoj:mlc:usb:Deskjet_F4200_series' is a HP Deskjet F4200 series > multi-function peripheral > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > Checking 'hpmudext' I/O extension... > OK, found. > > Checking 'scanext' SANE scanning extension... > OK, found. > > > > ----------------- > | USB I/O SETUP | > ----------------- > > Checking for permissions of USB attached printers... > > HP Device 0x2504 at 004:004: > Device URI: hp:/usb/Deskjet_F4200_series?serial=CN96P580TY05BR > Device node: /dev/bus/usb/004/004 > Mode: 0660 > getfacl: Removing leading '/' from absolute path names > # file: dev/bus/usb/004/004 > # owner: lp > # group: lp > user::rw- > user:caelinux:rw- > group::rw- > mask::rw- > other::--- > > > --------------- > | USER GROUPS | > --------------- > > caelinux adm dialout cdrom floppy audio dip video plugdev fuse lpadmin > admin sambashare > > > ----------- > | SUMMARY | > ----------- > > No errors or warnings. > > Done. > " > > BR > Peter > > > Dnia 1-11-2009 o godz. 6:53 Naga Samrat napisał(a): > > Please run "hp-check -t" and post the result. > > > > Thank you for supporting HPLIP, > > Naga Samrat. > > > > -- > > no printing , no scanning > > https://bugs.launchpad.net/bugs/467906 > > You received this bug notification because you are a direct subscriber > > of the bug. > > > > Status in HP Linux Imaging and Printing: New > > > > Bug description: > > installed; No bugs; device detected. > > When trying to scan - I get the message: Device busy > > When trying to print, I get the cynical message: "Job completed", but > > nothing happens. > > > > restarting everything didn't help. In other words I have a fully > > operational scanner/printer that doesn't work. > > > > Configuration: > > > > CAELINUX - Ubuntu 8.04 > > DELL Inspiron 1525 > > Printer: HP Deskjet F4250 (All in one) > > > > Thank you for your help in advance. > > ---------------------------------------------------- > Stwórz własną stronę startową! > Zbierz najciekawsze treści w jednym miejscu! > Internet od nowa! > http://klik.wp.pl/?adr=http%3A%2F%2Fpozbierane.pl&sid=902 > > -- > no printing , no scanning > https://bugs.launchpad.net/bugs/467906 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in HP Linux Imaging and Printing: New > > Bug description: > installed; No bugs; device detected. > When trying to scan - I get the message: Device busy > When trying to print, I get the cynical message: "Job completed", but > nothing happens. > > restarting everything didn't help. In other words I have a fully > operational scanner/printer that doesn't work. > > Configuration: > > CAELINUX - Ubuntu 8.04 > DELL Inspiron 1525 > Printer: HP Deskjet F4250 (All in one) > > Thank you for your help in advance. ---------------------------------------------------- Stwórz własną stronę startową! Zbierz najciekawsze treści w jednym miejscu! Internet od nowa! http://klik.wp.pl/?adr=http%3A%2F%2Fpozbierane.pl&sid=902