| 2016-07-11 18:33:58 |
Jack Beckitt-Marshall |
description |
I have a problem with my HP Officejet Pro 8600 within CentOS 7. Essentially, when I try to print from certain programs (such as Firefox), prints come out stretched, and do not appear on the page as they are supposed to. The attached JPEG shows my problem. This problem does not exist under Windows, so it is not a problem with the printer itself, but it seems a little strange.
hp-check output:
Saving output in log file: /home/jack/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.5)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run
time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 23-7.2.1511 version is not supported. Using 23-any versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 GNU/Linux
Host: localhost.localdomain
Proc: 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 GNU/Linux
Distribution: 23 7.2.1511
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.5
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 23 distro 7.2.1511 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.5
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.16.5
html=/usr/share/doc/hplip-3.16.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
latest_available_version = 3.16.5
notify_upgrade = false
last_upgraded_time = 1468159710
pending_upgrade_time = 0
[last_used]
device_uri = "hp:/net/HP_Officejet_Pro_8620?ip=192.168.0.148"
printer_name =
working_dir = .
[settings]
systray_visible = 0
systray_messages = 0
[commands]
scan =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 11/07/16 19:25:11
version = 3.16.5
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 4.8.5 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 3.82 OK -
libtool libtool - Library building support services REQUIRED - 2.4.2 OK -
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK -
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.2 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.10.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.17 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.5 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 1.6.3 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.1.1 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 2.5 OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.10.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 1.6.3 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.5 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.5 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.5 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.07 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 1.6.3 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.14 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.112 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.6.12 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.16.5 OK -
cupsext CUPS-Extension REQUIRED - 3.16.5 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/net/HP_Officejet_Pro_8620?ip=192.168.0.148' is a Hewlett-Packard HP_Officejet_Pro_8620 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_Officejet_Pro_8620
---------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.0.148
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620.ppd
PPD Description: HP Officejet Pro 8620, hpcups 3.16.5
Printer status: printer HP_Officejet_Pro_8620 is idle. enabled since Mon 11 Jul 2ready to printST
Communication status: Good
HP_Officejet_Pro_8620_fax
-------------------------
Type: Fax
Device URI: hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.0.148
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620_fax.ppd
PPD Description: HP Fax4 hpcups
Printer status: printer HP_Officejet_Pro_8620_fax is idle. enabled since Sun 10 Jul 2016 15:08:19 BST
Communication status: Good
--------------
| PERMISSION |
--------------
No errors or warnings.
Done. |
I have a problem with my HP Officejet Pro 8620 within CentOS 7. Essentially, when I try to print from certain programs (such as Firefox), prints come out stretched, and do not appear on the page as they are supposed to. The attached JPEG shows my problem. This problem does not exist under Windows, so it is not a problem with the printer itself, but it seems a little strange.
hp-check output:
Saving output in log file: /home/jack/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.5)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run
time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 23-7.2.1511 version is not supported. Using 23-any versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 GNU/Linux
Host: localhost.localdomain
Proc: 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 GNU/Linux
Distribution: 23 7.2.1511
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.5
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 23 distro 7.2.1511 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.5
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.16.5
html=/usr/share/doc/hplip-3.16.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
latest_available_version = 3.16.5
notify_upgrade = false
last_upgraded_time = 1468159710
pending_upgrade_time = 0
[last_used]
device_uri = "hp:/net/HP_Officejet_Pro_8620?ip=192.168.0.148"
printer_name =
working_dir = .
[settings]
systray_visible = 0
systray_messages = 0
[commands]
scan =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 11/07/16 19:25:11
version = 3.16.5
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 4.8.5 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 3.82 OK -
libtool libtool - Library building support services REQUIRED - 2.4.2 OK -
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK -
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.2 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.10.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.17 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.5 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 1.6.3 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.1.1 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 2.5 OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.10.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 1.6.3 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.5 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.5 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.5 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.07 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 1.6.3 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.14 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.112 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.6.12 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.16.5 OK -
cupsext CUPS-Extension REQUIRED - 3.16.5 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/net/HP_Officejet_Pro_8620?ip=192.168.0.148' is a Hewlett-Packard HP_Officejet_Pro_8620 all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_Officejet_Pro_8620
---------------------
Type: Printer
Device URI: hp:/net/HP_Officejet_Pro_8620?ip=192.168.0.148
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620.ppd
PPD Description: HP Officejet Pro 8620, hpcups 3.16.5
Printer status: printer HP_Officejet_Pro_8620 is idle. enabled since Mon 11 Jul 2ready to printST
Communication status: Good
HP_Officejet_Pro_8620_fax
-------------------------
Type: Fax
Device URI: hpfax:/net/HP_Officejet_Pro_8620?ip=192.168.0.148
PPD: /etc/cups/ppd/HP_Officejet_Pro_8620_fax.ppd
PPD Description: HP Fax4 hpcups
Printer status: printer HP_Officejet_Pro_8620_fax is idle. enabled since Sun 10 Jul 2016 15:08:19 BST
Communication status: Good
--------------
| PERMISSION |
--------------
No errors or warnings.
Done. |
|
