PCI-e controller: VIA, VL80x xHCI USB 3.0 Controller (rev 03) will cause freeze while booting, or during runtime on any device connecting

[Bortnyák Roland]

I have the following 4 port USB 3 PCI-e bus/controller device:
03:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 03)

If I connect my LUKS encrypted WD 1 TB external HDD device, using an USB 3 cable, it will freeze the computer, or won't boot, if it was plugged in.

If I don't plug anything to that USB 3 bus, it will not make any trouble, so the PCI-e card itself is not a problematic, what's more, it is working with exactly the same setup for Windows 7. Furthermore, another USB 2 Linux laptop can use that external HDD without problems.

On boot time, it writes this (sdb is an old PATA 300GB HDD, sdc is the mentioned 1 TB WD external HDD):

    sd 0:0:0:0: [sdb] No Caching mode page present
    sd 0:0:0:0: [sdb] Assuming drive cache: write through
    sd 7:0:0:0: [sdc] No Caching mode page present
    sd 7:0:0:0: [sdc] Assuming drive cache: write through

And this (I had an USB 2 pendrive connected, the cable can't be wrong, I was run it as a live Ubuntu a minute ago):

    usb 1-1-port3: cannot reset port 5 (err = -110)
     [... 5 times the previous ...]
    usb 1-1-port3: Cannot enable port 5. Maybe the USB cable is bad?

Should I add something to /etc/fstab, or how can this be solved?

Thank you!