[    18.974] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    18.974] X Protocol Version 11, Revision 0
[    18.974] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[    18.974] Current Operating System: Linux one 2.6.35-27-generic #47-Ubuntu SMP Fri Feb 11 21:01:29 UTC 2011 i686
[    18.975] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-27-generic root=UUID=6efa30cb-978e-4d8e-ac04-c6713a1e91d2 ro pci=nocrs quiet splash
[    18.975] Build Date: 09 January 2011  12:14:58PM
[    18.975] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
[    18.975] Current version of pixman: 0.18.4
[    18.975] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.975] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.976] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 19 11:51:54 2011
[    18.984] (==) Using config file: "/etc/X11/xorg.conf"
[    18.984] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.986] (==) No Layout section.  Using the first Screen section.
[    18.986] (==) No screen section available. Using defaults.
[    18.986] (**) |-->Screen "Default Screen Section" (0)
[    18.986] (**) |   |-->Monitor "<default monitor>"
[    18.987] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    18.987] (**) |   |-->Device "Configured Video Device"
[    18.987] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.988] (==) Automatically adding devices
[    18.988] (==) Automatically enabling devices
[    18.988] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.988] 	Entry deleted from font path.
[    19.014] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[    19.014] 	Entry deleted from font path.
[    19.014] 	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[    19.014] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    19.014] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    19.014] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.014] (II) Loader magic: 0x81f9b00
[    19.014] (II) Module ABI versions:
[    19.014] 	X.Org ANSI C Emulation: 0.4
[    19.014] 	X.Org Video Driver: 8.0
[    19.014] 	X.Org XInput driver : 11.0
[    19.014] 	X.Org Server Extension : 4.0
[    19.017] (--) PCI:*(0:0:2:0) 8086:8108:1025:0244 rev 7, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8
[    19.017] (II) Open ACPI successful (/var/run/acpid.socket)
[    19.018] (II) LoadModule: "extmod"
[    19.036] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    19.037] (II) Module extmod: vendor="X.Org Foundation"
[    19.037] 	compiled for 1.9.0, module version = 1.0.0
[    19.037] 	Module class: X.Org Server Extension
[    19.037] 	ABI class: X.Org Server Extension, version 4.0
[    19.037] (II) Loading extension MIT-SCREEN-SAVER
[    19.037] (II) Loading extension XFree86-VidModeExtension
[    19.037] (II) Loading extension XFree86-DGA
[    19.038] (II) Loading extension DPMS
[    19.038] (II) Loading extension XVideo
[    19.038] (II) Loading extension XVideo-MotionCompensation
[    19.038] (II) Loading extension X-Resource
[    19.038] (II) LoadModule: "dbe"
[    19.039] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    19.039] (II) Module dbe: vendor="X.Org Foundation"
[    19.039] 	compiled for 1.9.0, module version = 1.0.0
[    19.039] 	Module class: X.Org Server Extension
[    19.040] 	ABI class: X.Org Server Extension, version 4.0
[    19.040] (II) Loading extension DOUBLE-BUFFER
[    19.040] (II) LoadModule: "glx"
[    19.041] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.041] (II) Module glx: vendor="X.Org Foundation"
[    19.041] 	compiled for 1.9.0, module version = 1.0.0
[    19.041] 	ABI class: X.Org Server Extension, version 4.0
[    19.041] (==) AIGLX enabled
[    19.042] (II) Loading extension GLX
[    19.042] (II) LoadModule: "record"
[    19.042] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    19.043] (II) Module record: vendor="X.Org Foundation"
[    19.043] 	compiled for 1.9.0, module version = 1.13.0
[    19.043] 	Module class: X.Org Server Extension
[    19.043] 	ABI class: X.Org Server Extension, version 4.0
[    19.043] (II) Loading extension RECORD
[    19.043] (II) LoadModule: "dri"
[    19.043] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.044] (II) Module dri: vendor="X.Org Foundation"
[    19.044] 	compiled for 1.9.0, module version = 1.0.0
[    19.044] 	ABI class: X.Org Server Extension, version 4.0
[    19.044] (II) Loading extension XFree86-DRI
[    19.044] (II) LoadModule: "dri2"
[    19.045] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.045] (II) Module dri2: vendor="X.Org Foundation"
[    19.045] 	compiled for 1.9.0, module version = 1.2.0
[    19.045] 	ABI class: X.Org Server Extension, version 4.0
[    19.045] (II) Loading extension DRI2
[    19.046] (II) LoadModule: "psb"
[    19.072] (II) Loading /usr/lib/xorg/modules/drivers/psb_drv.so
[    19.073] (II) Module psb: vendor="X.Org Foundation"
[    19.073] 	compiled for 1.9.0, module version = 0.32.0
[    19.073] 	Module class: X.Org Video Driver
[    19.073] 	ABI class: X.Org Video Driver, version 8.0
[    19.073] (II) PSB: driver for Intel GMA500 chipsets: Intel GMA500
[    19.073] (++) using VT number 7

[    19.074] (WW) Falling back to old probe method for psb
[    19.074] (--) Assigning device section with no busID to primary device
[    19.074] (--) Chipset Intel GMA500 found
[    19.074] (II) PSB(0): psb_drv - 2.2.0.32L.0027
[    19.075] (II) Loading sub module "vbe"
[    19.075] (II) LoadModule: "vbe"
[    19.077] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    19.077] (II) Module vbe: vendor="X.Org Foundation"
[    19.077] 	compiled for 1.9.0, module version = 1.1.0
[    19.077] 	ABI class: X.Org Video Driver, version 8.0
[    19.077] (II) PSB(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    19.078] (==) PSB(0): Depth 24, (--) framebuffer bpp 32
[    19.078] (II) Loading sub module "fb"
[    19.078] (II) LoadModule: "fb"
[    19.080] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.080] (II) Module fb: vendor="X.Org Foundation"
[    19.080] 	compiled for 1.9.0, module version = 1.0.0
[    19.080] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.080] (--) PSB(0): Linear framebuffer at 0x0
[    19.080] (==) PSB(0): RGB weight 888
[    19.080] (==) PSB(0): Default visual is TrueColor
[    19.080] (==) PSB(0): Use hardware cursor.
[    19.081] (==) PSB(0): Not using ACPI for LVDS detection.
[    19.081] (II) Loading sub module "dri"
[    19.081] (II) LoadModule: "dri"
[    19.082] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[    19.082] (II) Loading sub module "Xpsb"
[    19.082] (II) LoadModule: "Xpsb"
[    19.083] (II) Loading /usr/lib/xorg/modules/drivers/Xpsb.so
[    19.083] (II) Module Xpsb: vendor="Tungsten Graphics Inc."
[    19.084] 	compiled for 1.6.0, module version = 0.1.0
[    19.084] (II) Loading sub module "vgahw"
[    19.084] (II) LoadModule: "vgahw"
[    19.085] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    19.085] (II) Module vgahw: vendor="X.Org Foundation"
[    19.085] 	compiled for 1.9.0, module version = 0.1.0
[    19.085] 	ABI class: X.Org Video Driver, version 8.0
[    19.086] (--) PSB(0): Mapped PCI MMIO at physical address 0xb0080000
	with size 512 kiB
[    19.087] (EE) PSB(0): the stolenBase is:0x3f800000
[    19.087] (--) PSB(0): Detected 7932 kiB of "stolen" memory set aside as video RAM.
[    19.087] (EE) PSB(0): screnIndex is:0;fbPhys is:0x3f800000; fbsize is:0x007bf000
[    19.097] (--) PSB(0): Mapped graphics aperture at physical address 0x3f800000
	with size 7 MiB
[    19.098] (II) PSB(0): Poulsbo MemClock 533, CoreClock 200
[    19.098] (II) PSB(0): Poulsbo Latencies 324 744 210 450
[    19.098] (II) PSB(0): sku_value is 0x00800000, sku_bSDVOEnable is 1, sku_bMaxResEnableInt is 0
[    19.098] (II) PSB(0): Output LVDS0 has no monitor section
[    19.098] (II) PSB(0): I2C bus "LVDSBLC_B" initialized.
[    19.098] (II) PSB(0): I2C bus "LVDSDDC_C" initialized.
[    19.098] (II) PSB(0): I2C device "LVDSBLC_B:BLC Control" registered at address 0x58.
[    19.099] (II) PSB(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[    19.183] (II) PSB(0): EDID for output LVDS0
[    19.183] (II) PSB(0): Manufacturer: AUO  Model: 205c  Serial#: 0
[    19.183] (II) PSB(0): Year: 2008  Week: 1
[    19.183] (II) PSB(0): EDID Version: 1.3
[    19.184] (II) PSB(0): Digital Display Input
[    19.184] (II) PSB(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    19.184] (II) PSB(0): Gamma: 2.20
[    19.184] (II) PSB(0): No DPMS capabilities specified
[    19.184] (II) PSB(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.184] (II) PSB(0): First detailed timing is preferred mode
[    19.184] (II) PSB(0): redX: 0.584 redY: 0.333   greenX: 0.338 greenY: 0.571
[    19.184] (II) PSB(0): blueX: 0.158 blueY: 0.133   whiteX: 0.313 whiteY: 0.329
[    19.185] (II) PSB(0): Manufacturer's mask: 0
[    19.185] (II) PSB(0): Supported detailed timing:
[    19.185] (II) PSB(0): clock: 72.0 MHz   Image Size:  256 x 144 mm
[    19.185] (II) PSB(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1494 h_border: 0
[    19.185] (II) PSB(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 803 v_border: 0
[    19.185] (II) PSB(0): Unknown vendor-specific block f
[    19.185] (II) PSB(0):  AUO
[    19.185] (II) PSB(0):  B116XW02 V0
[    19.185] (II) PSB(0): EDID (in hex):
[    19.186] (II) PSB(0): 	00ffffffffffff0006af5c2000000000
[    19.186] (II) PSB(0): 	01120103801a0e780a99859555569228
[    19.186] (II) PSB(0): 	22505400000001010101010101010101
[    19.186] (II) PSB(0): 	010101010101201c5680500023303020
[    19.186] (II) PSB(0): 	36000090100000180000000f00000000
[    19.186] (II) PSB(0): 	00000000000000000020000000fe0041
[    19.186] (II) PSB(0): 	554f0a202020202020202020000000fe
[    19.186] (II) PSB(0): 	004231313658573032205630200a00be
[    19.186] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    19.186] (II) PSB(0): Printing DDC gathered Modelines:
[    19.187] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    19.187] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    19.187] (II) Loading sub module "int10"
[    19.187] (II) LoadModule: "int10"
[    19.188] (II) Loading /usr/lib/xorg/modules/libint10.so
[    19.188] (II) Module int10: vendor="X.Org Foundation"
[    19.188] 	compiled for 1.9.0, module version = 1.0.0
[    19.188] 	ABI class: X.Org Video Driver, version 8.0
[    19.188] (II) PSB(0): initializing int10
[    19.190] (II) PSB(0): Bad V_BIOS checksum
[    19.190] (II) PSB(0): Primary V_BIOS segment is: 0xc000
[    19.191] (II) PSB(0): VESA BIOS detected
[    19.191] (II) PSB(0): VESA VBE Version 3.0
[    19.191] (II) PSB(0): VESA VBE Total Mem: 7872 kB
[    19.191] (II) PSB(0): VESA VBE OEM: Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS
[    19.191] (II) PSB(0): VESA VBE OEM Software Rev: 1.0
[    19.191] (II) PSB(0): VESA VBE OEM Vendor: Intel Corporation
[    19.191] (II) PSB(0): VESA VBE OEM Product: Intel(r)Poulsbo Graphics Controller
[    19.191] (II) PSB(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[    19.191] (II) PSB(0): Found panel mode in BIOS VBT tables:
[    19.191] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 (48.2 kHz)
[    19.192] (II) PSB(0): BLC Data in BIOS VBT tables: datasize=0 paneltype=15                      type=0x02 pol=0x00 freq=0x03e8 minlevel=0x00                         i2caddr=0x58 cmd=0xaa 
[    19.192] (WW) PSB(0): BIOS panel mode data doesn't match probed data, continuing with probed.
[    19.192] (II) PSB(0): BIOS mode:
[    19.192] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 (48.2 kHz)
[    19.192] (II) PSB(0): probed mode:
[    19.192] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    19.192] xf86TokenToOptinfo: table is NULL
[    19.192] (II) PSB(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
[    19.192] (II) PSB(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
[    19.275] (II) PSB(0): I2C bus "SDVOB DDC Bus" initialized.
[    19.422] (II) PSB(0): Output SDVO-1 has no monitor section
[    19.436] (II) PSB(0): SDVO device VID/DID: 02:42.02, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[    19.436] (++) PSB(0): i830_psbSaveHWState
[    19.439] (II) PSB(0): Current clock rate multiplier: 1
[    19.615] (==) PSB(0): Shadow framebuffer disabled
[    19.615] (II) Loading sub module "exa"
[    19.615] (II) LoadModule: "exa"
[    19.625] (II) Loading /usr/lib/xorg/modules/libexa.so
[    19.625] (II) Module exa: vendor="X.Org Foundation"
[    19.625] 	compiled for 1.9.0, module version = 2.5.0
[    19.625] 	ABI class: X.Org Video Driver, version 8.0
[    19.626] (==) PSB(0): Acceleration enabled
[    19.626] (==) PSB(0): [EXA] Allocate 32768 kiB for EXA pixmap cache.
[    19.626] (==) PSB(0): [EXA] Allocate 4 kiB for scratch memory.
[    19.626] (II) PSB(0): Output "SDVO-1" is assigned to this screen.
[    19.626] (II) PSB(0): Output "LVDS0" is assigned to this screen.
[    19.626] (II) PSB(0): Searching for matching Poulsbo mode(s):
[    19.690] (II) PSB(0): EDID for output LVDS0
[    19.690] (II) PSB(0): Manufacturer: AUO  Model: 205c  Serial#: 0
[    19.690] (II) PSB(0): Year: 2008  Week: 1
[    19.690] (II) PSB(0): EDID Version: 1.3
[    19.690] (II) PSB(0): Digital Display Input
[    19.690] (II) PSB(0): Max Image Size [cm]: horiz.: 26  vert.: 14
[    19.691] (II) PSB(0): Gamma: 2.20
[    19.691] (II) PSB(0): No DPMS capabilities specified
[    19.691] (II) PSB(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.691] (II) PSB(0): First detailed timing is preferred mode
[    19.691] (II) PSB(0): redX: 0.584 redY: 0.333   greenX: 0.338 greenY: 0.571
[    19.691] (II) PSB(0): blueX: 0.158 blueY: 0.133   whiteX: 0.313 whiteY: 0.329
[    19.691] (II) PSB(0): Manufacturer's mask: 0
[    19.691] (II) PSB(0): Supported detailed timing:
[    19.691] (II) PSB(0): clock: 72.0 MHz   Image Size:  256 x 144 mm
[    19.691] (II) PSB(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1494 h_border: 0
[    19.691] (II) PSB(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 803 v_border: 0
[    19.691] (II) PSB(0): Unknown vendor-specific block f
[    19.692] (II) PSB(0):  AUO
[    19.692] (II) PSB(0):  B116XW02 V0
[    19.692] (II) PSB(0): EDID (in hex):
[    19.692] (II) PSB(0): 	00ffffffffffff0006af5c2000000000
[    19.692] (II) PSB(0): 	01120103801a0e780a99859555569228
[    19.692] (II) PSB(0): 	22505400000001010101010101010101
[    19.692] (II) PSB(0): 	010101010101201c5680500023303020
[    19.692] (II) PSB(0): 	36000090100000180000000f00000000
[    19.692] (II) PSB(0): 	00000000000000000020000000fe0041
[    19.692] (II) PSB(0): 	554f0a202020202020202020000000fe
[    19.692] (II) PSB(0): 	004231313658573032205630200a00be
[    19.692] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    19.692] (II) PSB(0): Printing DDC gathered Modelines:
[    19.692] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    19.693] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    19.693] (II) PSB(0): Printing probed modes for output LVDS0
[    19.693] (II) PSB(0): Modeline "1366x768"x60.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    19.744] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    19.982] (II) PSB(0): EDID for output SDVO-1
[    19.982] (II) PSB(0): Output LVDS0 connected
[    19.982] (II) PSB(0): Output SDVO-1 disconnected
[    19.982] (II) PSB(0): Using exact sizes for initial modes
[    19.982] (II) PSB(0): Output LVDS0 using initial mode 1366x768
[    19.983] (II) PSB(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.983] (**) PSB(0): Display dimensions: (260, 140) mm
[    19.983] (**) PSB(0): DPI set to (133, 247)
[    19.983] (--) Depth 24 pixmap format is 32 bpp
[    19.983] drmOpenDevice: node name is /dev/dri/card0
[    19.991] drmOpenDevice: open result is -1, (No such device or address)
[    19.999] drmOpenDevice: open result is -1, (No such device or address)
[    19.999] drmOpenDevice: Open failed
[    19.999] drmOpenDevice: node name is /dev/dri/card0
[    20.007] drmOpenDevice: open result is -1, (No such device or address)
[    20.015] drmOpenDevice: open result is -1, (No such device or address)
[    20.015] drmOpenDevice: Open failed
[    22.126] drmOpenByBusid: Searching for BusID PCI:0:2:0
[    22.126] drmOpenDevice: node name is /dev/dri/card0
[    22.126] drmOpenDevice: open result is 11, (OK)
[    22.126] drmOpenByBusid: drmOpenMinor returns 11
[    22.126] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    22.126] (II) [drm] loaded kernel module for "psb" driver.
[    22.126] (II) [drm] DRM interface version 1.3
[    22.127] (II) [drm] DRM open master succeeded.
[    22.127] (II) PSB(0): [drm] Using the DRM lock SAREA also for drawables.
[    22.127] (II) PSB(0): [drm] framebuffer handle = 0x3f800000
[    22.127] (II) PSB(0): [drm] added 1 reserved context for kernel
[    22.127] (II) PSB(0): X context handle = 0x1
[    22.127] (II) PSB(0): [drm] installed DRM signal handler
[    22.128] (II) PSB(0): [drm] Allocated device DRM context 2.
[    22.128] (II) [drm] Irq handler installed for IRQ 16.
[    22.368] (II) PSB(0): Using default MigrationHeuristic: greedy
[    22.369] (II) EXA(0): Driver allocated offscreen pixmaps
[    22.369] (II) EXA(0): Driver registered support for the following operations:
[    22.369] (II)         Solid
[    22.369] (II)         Copy
[    22.369] (II)         Composite (RENDER acceleration)
[    22.369] (II)         UploadToScreen
[    22.369] (==) PSB(0): Backing store disabled
[    22.369] (==) PSB(0): Silken mouse enabled
[    22.369] (==) PSB(0): DPMS enabled
[    22.369] (II) PSB(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.409] (II) PSB(0): [DRI] installation complete
[    22.409] Xpsb - 5.0.1.0046
[    22.544] (II) PSB(0): [Xpsb] Disable hog plug daemon in PSB driver.
[    22.544] (II) PSB(0): [Xpsb] Started kernel request thread.
[    22.544] (II) PSB(0): Xpsb extension for 3D engine acceleration enabled.
[    22.544] (II) PSB(0): Set up textured video
[    22.544] (II) PSB(0): Xv video acceleration enabled.
[    22.544] (II) PSB(0): Initializing HW Cursor.
[    22.544] (EE) PSB(0): has_fbdev is true
[    22.545] (++) PSB(0): i830_psbSaveHWState
[    22.548] (II) PSB(0): Current clock rate multiplier: 1
[    23.491] (II) PSB(0): xxi830_Output configuration:
[    23.491] (II) PSB(0):   Pipe A is off
[    23.491] (II) PSB(0):   Display plane A is now disabled and connected to pipe A.
[    23.491] (II) PSB(0):   Pipe B is on
[    23.491] (II) PSB(0):   Display plane B is now enabled and connected to pipe B.
[    23.491] (II) PSB(0):   Output LVDS0 is connected to pipe B
[    23.492] (II) PSB(0):   Output SDVO-1 is connected to pipe none
[    23.492] (--) RandR disabled
[    23.492] (II) Initializing built-in extension Generic Event Extension
[    23.492] (II) Initializing built-in extension SHAPE
[    23.492] (II) Initializing built-in extension MIT-SHM
[    23.492] (II) Initializing built-in extension XInputExtension
[    23.492] (II) Initializing built-in extension XTEST
[    23.492] (II) Initializing built-in extension BIG-REQUESTS
[    23.492] (II) Initializing built-in extension SYNC
[    23.492] (II) Initializing built-in extension XKEYBOARD
[    23.492] (II) Initializing built-in extension XC-MISC
[    23.492] (II) Initializing built-in extension SECURITY
[    23.492] (II) Initializing built-in extension XINERAMA
[    23.492] (II) Initializing built-in extension XFIXES
[    23.492] (II) Initializing built-in extension RENDER
[    23.492] (II) Initializing built-in extension RANDR
[    23.493] (II) Initializing built-in extension COMPOSITE
[    23.493] (II) Initializing built-in extension DAMAGE
[    23.493] (II) Initializing built-in extension GESTURE
[    23.529] (II) AIGLX: Screen 0 is not DRI2 capable
[    23.529] drmOpenDevice: node name is /dev/dri/card0
[    23.529] drmOpenDevice: open result is 13, (OK)
[    23.529] drmOpenByBusid: Searching for BusID PCI:0:2:0
[    23.530] drmOpenDevice: node name is /dev/dri/card0
[    23.530] drmOpenDevice: open result is 13, (OK)
[    23.530] drmOpenByBusid: drmOpenMinor returns 13
[    23.530] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.547] (II) AIGLX: enabled GLX_SGI_make_current_read
[    23.547] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.547] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.547] (II) AIGLX: Loaded and initialized /usr/lib/dri/psb_dri.so
[    23.547] (II) GLX: Initialized DRI GL provider for screen 0
[    23.549] (II) PSB(0): Setting screen physical size to 361 x 203
[    23.786] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    23.814] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    23.815] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    23.815] (II) LoadModule: "evdev"
[    23.815] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.816] (II) Module evdev: vendor="X.Org Foundation"
[    23.816] 	compiled for 1.9.0, module version = 2.3.2
[    23.816] 	Module class: X.Org XInput Driver
[    23.816] 	ABI class: X.Org XInput driver, version 11.0
[    23.817] (**) Video Bus: always reports core events
[    23.817] (**) Video Bus: Device: "/dev/input/event6"
[    23.828] (II) Video Bus: Found keys
[    23.828] (II) Video Bus: Configuring as keyboard
[    23.828] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    23.829] (**) Option "xkb_rules" "evdev"
[    23.829] (**) Option "xkb_model" "evdev"
[    23.829] (**) Option "xkb_layout" "it"
[    23.838] (II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
[    23.845] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    23.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.845] (**) Power Button: always reports core events
[    23.845] (**) Power Button: Device: "/dev/input/event1"
[    23.856] (II) Power Button: Found keys
[    23.856] (II) Power Button: Configuring as keyboard
[    23.856] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    23.857] (**) Option "xkb_rules" "evdev"
[    23.857] (**) Option "xkb_model" "evdev"
[    23.857] (**) Option "xkb_layout" "it"
[    23.860] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    23.860] (II) No input driver/identifier specified (ignoring)
[    23.861] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    23.861] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    23.861] (**) Sleep Button: always reports core events
[    23.861] (**) Sleep Button: Device: "/dev/input/event2"
[    23.876] (II) Sleep Button: Found keys
[    23.876] (II) Sleep Button: Configuring as keyboard
[    23.876] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    23.877] (**) Option "xkb_rules" "evdev"
[    23.877] (**) Option "xkb_model" "evdev"
[    23.877] (**) Option "xkb_layout" "it"
[    23.886] (II) config/udev: Adding input device WebCam (/dev/input/event4)
[    23.886] (**) WebCam: Applying InputClass "evdev keyboard catchall"
[    23.886] (**) WebCam: always reports core events
[    23.886] (**) WebCam: Device: "/dev/input/event4"
[    23.896] (II) WebCam: Found keys
[    23.896] (II) WebCam: Configuring as keyboard
[    23.896] (II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD)
[    23.897] (**) Option "xkb_rules" "evdev"
[    23.897] (**) Option "xkb_model" "evdev"
[    23.897] (**) Option "xkb_layout" "it"
[    23.906] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    23.906] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    23.906] (**) AT Translated Set 2 keyboard: always reports core events
[    23.906] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    23.916] (II) AT Translated Set 2 keyboard: Found keys
[    23.916] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    23.916] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    23.917] (**) Option "xkb_rules" "evdev"
[    23.917] (**) Option "xkb_model" "evdev"
[    23.917] (**) Option "xkb_layout" "it"
[    23.920] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    23.920] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    23.920] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    23.920] (II) LoadModule: "synaptics"
[    23.921] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    23.921] (II) Module synaptics: vendor="X.Org Foundation"
[    23.921] 	compiled for 1.9.0, module version = 1.2.2
[    23.921] 	Module class: X.Org XInput Driver
[    23.921] 	ABI class: X.Org XInput driver, version 11.0
[    23.922] (II) Synaptics touchpad driver version 1.2.2
[    23.922] (**) Option "Device" "/dev/input/event5"
[    23.968] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    23.968] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5012
[    23.968] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    23.968] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[    23.969] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[    24.004] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    24.004] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.020] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    24.020] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.021] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    24.021] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.021] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.052] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    24.054] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    24.054] (II) No input driver/identifier specified (ignoring)
[    24.167] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    25.771] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    25.771] (II) PSB(0): Printing DDC gathered Modelines:
[    25.772] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    25.772] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    25.811] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    26.116] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.116] (II) PSB(0): Printing DDC gathered Modelines:
[    26.116] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    26.116] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.157] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    26.466] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.467] (II) PSB(0): Printing DDC gathered Modelines:
[    26.467] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    26.467] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.507] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    26.844] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.844] (II) PSB(0): Printing DDC gathered Modelines:
[    26.844] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    26.844] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    26.883] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    27.418] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    27.418] (II) PSB(0): Printing DDC gathered Modelines:
[    27.419] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    27.419] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    27.463] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!
[    34.854] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    34.855] (II) PSB(0): Printing DDC gathered Modelines:
[    34.855] (II) PSB(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1494  768 771 777 803 -hsync -vsync (48.2 kHz)
[    34.855] (II) PSB(0): EDID vendor "AUO", prod id 8284
[    34.941] (EE) PSB(0): First SDVO output reported failure to sync or input is not trainded!!!