Drill ON if exercise exited with drill ON (Ubuntu v.0.2.6)

[JohanO]

If a mouse case is launched, drill is turned ON and left ON when the case is exited, the drill will still be turned ON when a haptic case is launced.

Steps to reproduce:
1) Start FsWisdom and login
2) Launch a mouse/haptic case
3) Turn drill ON
4) Press Exit button and no/yes
5) Launch a mouse/haptic (opposite to what was selected in step 2!!) case

<The drill is still turned ON even though the drill hasn't been turned ON yet>

[Ulrika Dreifaldt (ulrika-dreifaldt)]

Almost solved. If the above steps to reproduce is followed the drillspeed is now set to 0 (good!). But in the case if mouse launch--> drill ON--> haptic launch the haptic device "shakes" as if it was drilling, but no material is removed. In the Advanced tab the Force is not 0 even if the drill isn't touching any "force material". This is also valid for haptic launch--> drill ON--> mouse launch. To set Force = 0 the drill has to be activated once (space button).

[JohanO (johan-olofsson)]

For the comment above the lp:~forsslundsystems/forssim/forssim_0.2.7 branch was used.

[jocke (jocke-karlsson)]

Should be solved in forssim_0.2.7 with a last minute fix.
Please retest.

[JohanO (johan-olofsson)]

Not possible to retest in v.0.2.7-Windows due to the fact that it is not possible to launch a second case. Hopefully retest with v.0.2.8.