[   71.021781] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   71.025289] NET: Registered protocol family 8
[   71.025294] NET: Registered protocol family 20
[   71.025465] pnp: 00:0b: ioport range 0x800-0x89f has been reserved
[   71.025471] pnp: 00:0b: ioport range 0x500-0x501 has been reserved
[   71.025477] pnp: 00:0b: ioport range 0x8a0-0x8af has been reserved
[   71.025483] pnp: 00:0b: ioport range 0xc00-0xcd7 has been reserved
[   71.025489] pnp: 00:0b: ioport range 0xf50-0xf58 has been reserved
[   71.025864] Time: tsc clocksource has been installed.
[   71.056131] PCI: Bridge: 0000:01:02.0
[   71.056137]   IO window: disabled.
[   71.056145]   MEM window: disabled.
[   71.056152]   PREFETCH window: disabled.
[   71.056191] NET: Registered protocol family 2
[   71.093903] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   71.094155] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   71.100963] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   71.102999] TCP: Hash tables configured (established 131072 bind 65536)
[   71.103010] TCP reno registered
[   71.114167] checking if image is initramfs... it is
[   71.557620] Switched to high resolution mode on CPU 0
[   71.955153] Freeing initrd memory: 4936k freed
[   71.956027] audit: initializing netlink socket (disabled)
[   71.956057] audit(1191591511.144:1): initialized
[   71.956203] highmem bounce pool size: 64 pages
[   71.960922] VFS: Disk quotas dquot_6.5.1
[   71.961074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   71.961330] io scheduler noop registered
[   71.961336] io scheduler anticipatory registered
[   71.961341] io scheduler deadline registered
[   71.961428] io scheduler cfq registered (default)
[   71.961460] Boot video device is 0000:00:0e.0
[   71.961896] isapnp: Scanning for PnP cards...
[   72.315190] isapnp: No Plug & Play device found
[   72.377014] Real Time Clock Driver v1.12ac
[   72.377292] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   72.377451] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   72.377889] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   72.379139] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   72.379687] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   72.381349] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   72.381826] input: Macintosh mouse button emulation as /class/input/input0
[   72.382001] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   72.384633] serio: i8042 KBD port at 0x60,0x64 irq 1
[   72.384647] serio: i8042 AUX port at 0x60,0x64 irq 12
[   72.385033] mice: PS/2 mouse device common for all mice
[   72.385283] EISA: Probing bus 0 at eisa.0
[   72.385294] EISA: Cannot allocate resource for mainboard
[   72.385341] EISA: Detected 0 cards.
[   72.385542] TCP cubic registered
[   72.385579] NET: Registered protocol family 1
[   72.385637] Using IPI No-Shortcut mode
[   72.385944]   Magic number: 11:358:634
[   72.386039]   hash matches device ptycd
[   72.386759] Freeing unused kernel memory: 364k freed
[   72.451364] input: AT Translated Set 2 keyboard as /class/input/input1
[   73.724018] SCSI subsystem initialized
[   73.742428] libata version 2.21 loaded.
[   73.747252] scsi0 : pata_serverworks
[   73.747350] scsi1 : pata_serverworks
[   73.747397] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000108b0 irq 14
[   73.747405] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x000108b8 irq 15
[   73.794794] usbcore: registered new interface driver usbfs
[   73.794846] usbcore: registered new interface driver hub
[   73.794891] usbcore: registered new device driver usb
[   73.797573] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   73.945000] Floppy drive(s): fd0 is 1.44M
[   74.032733] FDC 0 is a National Semiconductor PC87306
[   74.064581] ata1.00: ATAPI: TEAC CD-ROM CD-224E, 3.7D, max UDMA/33
[   74.228490] ata1.00: configured for UDMA/33
[   74.384719] scsi 0:0:0:0: CD-ROM            TEAC     CD-224E          3.7D PQ: 0 ANSI: 5
[   74.391896] ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10
[   74.391918] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10
[   74.391942] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[   74.392171] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[   74.392231] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe200000
[   74.414346] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[   74.414359] Uniform CD-ROM driver Revision: 3.20
[   74.414801] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   74.423384] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   74.450514] usb usb1: configuration #1 chosen from 1 choice
[   74.450585] hub 1-0:1.0: USB hub found
[   74.450603] hub 1-0:1.0: 2 ports detected
[   74.510317] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[   74.635745] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[   75.564087] usbcore: registered new interface driver usbkbd
[   75.564406] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver
[   75.585260] usbcore: registered new interface driver hiddev
[   75.587043] usbcore: registered new interface driver usbhid
[   75.587362] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   75.598747] usbcore: registered new interface driver usbserial
[   75.600577] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[   75.602389] usbcore: registered new interface driver usbserial_generic
[   75.602407] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   75.892711] vga16fb: initializing
[   75.893025] vga16fb: mapped to 0xc00a0000
[   75.894887] fb0: VGA16 VGA frame buffer device
[   76.038691] Console: switching to colour frame buffer device 80x30
[  103.177958] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  103.178275] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  103.235593] usbcore: registered new interface driver libusual
[  103.242683] Initializing USB Mass Storage driver...
[  103.244533] usbcore: registered new interface driver usb-storage
[  103.244848] USB Mass Storage support registered.
[  104.168993] ide0: I/O resource 0x3F6-0x3F6 not free.
[  104.169004] ide0: ports already in use, skipping probe
[  104.169010] ide1: I/O resource 0x376-0x376 not free.
[  104.169014] ide1: ports already in use, skipping probe
[  104.224145] ide-floppy driver 0.99.newide
[  104.558698] Intel ISA PCIC probe: not found.
[  109.620315] ISO 9660 Extensions: Microsoft Joliet Level 3
[  109.634063] Unable to load NLS charset cp437
[  109.647688] Unable to load NLS charset cp437
[  109.735737] ISO 9660 Extensions: RRIP_1991A
[  156.975120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  156.975139] ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 129024 in
[  156.975143]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[  156.975157] ata1: soft resetting port
[  157.459045] ata1.00: configured for UDMA/33
[  157.459073] ata1: EH complete
[  187.443953] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  187.443972] ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 129024 in
[  187.443976]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[  187.443990] ata1: soft resetting port
[  187.927880] ata1.00: configured for UDMA/33
[  187.927906] ata1: EH complete
ting
[   71.021781] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   71.025289] NET: Registered protocol family 8
[   71.025294] NET: Registered protocol family 20
[   71.025465] pnp: 00:0b: ioport range 0x800-0x89f has been reserved
[   71.025471] pnp: 00:0b: ioport range 0x500-0x501 has been reserved
[   71.025477] pnp: 00:0b: ioport range 0x8a0-0x8af has been reserved
[   71.025483] pnp: 00:0b: ioport range 0xc00-0xcd7 has been reserved
[   71.025489] pnp: 00:0b: ioport range 0xf50-0xf58 has been reserved
[   71.025864] Time: tsc clocksource has been installed.
[   71.056131] PCI: Bridge: 0000:01:02.0
[   71.056137]   IO window: disabled.
[   71.056145]   MEM window: disabled.
[   71.056152]   PREFETCH window: disabled.
[   71.056191] NET: Registered protocol family 2
[   71.093903] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   71.094155] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   71.100963] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   71.102999] TCP: Hash tables configured (established 131072 bind 65536)
[   71.103010] TCP reno registered
[   71.114167] checking if image is initramfs... it is
[   71.557620] Switched to high resolution mode on CPU 0
[   71.955153] Freeing initrd memory: 4936k freed
[   71.956027] audit: initializing netlink socket (disabled)
[   71.956057] audit(1191591511.144:1): initialized
[   71.956203] highmem bounce pool size: 64 pages
[   71.960922] VFS: Disk quotas dquot_6.5.1
[   71.961074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   71.961330] io scheduler noop registered
[   71.961336] io scheduler anticipatory registered
[   71.961341] io scheduler deadline registered
[   71.961428] io scheduler cfq registered (default)
[   71.961460] Boot video device is 0000:00:0e.0
[   71.961896] isapnp: Scanning for PnP cards...
[   72.315190] isapnp: No Plug & Play device found
[   72.377014] Real Time Clock Driver v1.12ac
[   72.377292] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   72.377451] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   72.377889] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   72.379139] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   72.379687] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   72.381349] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   72.381826] input: Macintosh mouse button emulation as /class/input/input0
[   72.382001] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   72.384633] serio: i8042 KBD port at 0x60,0x64 irq 1
[   72.384647] serio: i8042 AUX port at 0x60,0x64 irq 12
[   72.385033] mice: PS/2 mouse device common for all mice
[   72.385283] EISA: Probing bus 0 at eisa.0
[   72.385294] EISA: Cannot allocate resource for mainboard
[   72.385341] EISA: Detected 0 cards.
[   72.385542] TCP cubic registered
[   72.385579] NET: Registered protocol family 1
[   72.385637] Using IPI No-Shortcut mode
[   72.385944]   Magic number: 11:358:634
[   72.386039]   hash matches device ptycd
[   72.386759] Freeing unused kernel memory: 364k freed
[   72.451364] input: AT Translated Set 2 keyboard as /class/input/input1
[   73.724018] SCSI subsystem initialized
[   73.742428] libata version 2.21 loaded.
[   73.747252] scsi0 : pata_serverworks
[   73.747350] scsi1 : pata_serverworks
[   73.747397] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000108b0 irq 14
[   73.747405] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x000108b8 irq 15
[   73.794794] usbcore: registered new interface driver usbfs
[   73.794846] usbcore: registered new interface driver hub
[   73.794891] usbcore: registered new device driver usb
[   73.797573] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   73.945000] Floppy drive(s): fd0 is 1.44M
[   74.032733] FDC 0 is a National Semiconductor PC87306
[   74.064581] ata1.00: ATAPI: TEAC CD-ROM CD-224E, 3.7D, max UDMA/33
[   74.228490] ata1.00: configured for UDMA/33
[   74.384719] scsi 0:0:0:0: CD-ROM            TEAC     CD-224E          3.7D PQ: 0 ANSI: 5
[   74.391896] ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10
[   74.391918] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10
[   74.391942] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[   74.392171] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[   74.392231] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe200000
[   74.414346] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[   74.414359] Uniform CD-ROM driver Revision: 3.20
[   74.414801] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   74.423384] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   74.450514] usb usb1: configuration #1 chosen from 1 choice
[   74.450585] hub 1-0:1.0: USB hub found
[   74.450603] hub 1-0:1.0: 2 ports detected
[   74.510317] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[   74.635745] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[   75.564087] usbcore: registered new interface driver usbkbd
[   75.564406] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver
[   75.585260] usbcore: registered new interface driver hiddev
[   75.587043] usbcore: registered new interface driver usbhid
[   75.587362] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   75.598747] usbcore: registered new interface driver usbserial
[   75.600577] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[   75.602389] usbcore: registered new interface driver usbserial_generic
[   75.602407] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   75.892711] vga16fb: initializing
[   75.893025] vga16fb: mapped to 0xc00a0000
[   75.894887] fb0: VGA16 VGA frame buffer device
[   76.038691] Console: switching to colour frame buffer device 80x30
[  103.177958] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  103.178275] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  103.235593] usbcore: registered new interface driver libusual
[  103.242683] Initializing USB Mass Storage driver...
[  103.244533] usbcore: registered new interface driver usb-storage
[  103.244848] USB Mass Storage support registered.
[  104.168993] ide0: I/O resource 0x3F6-0x3F6 not free.
[  104.169004] ide0: ports already in use, skipping probe
[  104.169010] ide1: I/O resource 0x376-0x376 not free.
[  104.169014] ide1: ports already in use, skipping probe
[  104.224145] ide-floppy driver 0.99.newide
[  104.558698] Intel ISA PCIC probe: not found.
[  109.620315] ISO 9660 Extensions: Microsoft Joliet Level 3
[  109.634063] Unable to load NLS charset cp437
[  109.647688] Unable to load NLS charset cp437
[  109.735737] ISO 9660 Extensions: RRIP_1991A
[  156.975120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  156.975139] ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 129024 in
[  156.975143]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[  156.975157] ata1: soft resetting port
[  157.459045] ata1.00: configured for UDMA/33
[  157.459073] ata1: EH complete
[  187.443953] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[  187.443972] ata1.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 129024 in
[  187.443976]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[  187.443990] ata1: soft resetting port
[  187.927880] ata1.00: configured for UDMA/33
[  187.927906] ata1: EH complete