[    0.000345] Initializing cgroup subsys memory
[    0.000356] Initializing cgroup subsys devices
[    0.000359] Initializing cgroup subsys freezer
[    0.000363] Initializing cgroup subsys blkio
[    0.000371] Initializing cgroup subsys perf_event
[    0.000409] CPU: Physical Processor ID: 0
[    0.000411] CPU: Processor Core ID: 0
[    0.000420] mce: CPU supports 9 MCE banks
[    0.000434] CPU0: Thermal monitoring handled by SMI
[    0.000445] using mwait in idle threads.
[    0.003814] ACPI: Core revision 20110623
[    0.037331] ftrace: allocating 26573 entries in 53 pages
[    0.051080] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.051596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.091282] CPU0: Intel(R) Core(TM) i3 CPU       U 380  @ 1.33GHz stepping 05
[    0.195667] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.195679] ... version:                3
[    0.195681] ... bit width:              48
[    0.195683] ... generic registers:      4
[    0.195686] ... value mask:             0000ffffffffffff
[    0.195688] ... max period:             000000007fffffff
[    0.195691] ... fixed-purpose events:   3
[    0.195693] ... event mask:             000000070000000f
[    0.195920] NMI watchdog enabled, takes one hw-pmu counter.
[    0.196051] CPU 1 irqstacks, hard=f7512000 soft=f7514000
[    0.196055] Booting Node   0, Processors  #1
[    0.196058] smpboot cpu 1: start_ip = 98000
[    0.206408] Initializing CPU#1
[    0.283701] CPU1: Thermal monitoring handled by SMI
[    0.303870] NMI watchdog enabled, takes one hw-pmu counter.
[    0.304006] CPU 2 irqstacks, hard=f7520000 soft=f7522000
[    0.304009]  #2
[    0.304012] smpboot cpu 2: start_ip = 98000
[    0.314205] Initializing CPU#2
[    0.327675] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4294781006 >=post_end=10453494
[    0.391711] CPU2: Thermal monitoring handled by SMI
[    0.411878] NMI watchdog enabled, takes one hw-pmu counter.
[    0.412038] CPU 3 irqstacks, hard=f7554000 soft=f7556000
[    0.412041]  #3 Ok.
[    0.412044] smpboot cpu 3: start_ip = 98000
[    0.422236] Initializing CPU#3
[    0.499715] CPU3: Thermal monitoring handled by SMI
[    0.519848] NMI watchdog enabled, takes one hw-pmu counter.
[    0.519908] Brought up 4 CPUs
[    0.519911] Total of 4 processors activated (10639.51 BogoMIPS).
[    0.524004] devtmpfs: initialized
[    0.524199] EVM: security.selinux
[    0.524201] EVM: security.SMACK64
[    0.524203] EVM: security.capability
[    0.524246] PM: Registering ACPI NVS region at bb470000 (528384 bytes)
[    0.524270] PM: Registering ACPI NVS region at bb77f000 (131072 bytes)
[    0.525914] print_constraints: dummy: 
[    0.525955] RTC time:  8:34:28, date: 03/15/12
[    0.526016] NET: Registered protocol family 16
[    0.526170] Trying to unpack rootfs image as initramfs...
[    0.526190] EISA bus registered
[    0.526219] ACPI: bus type pci registered
[    0.526334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.526340] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.526343] PCI: Using MMCONFIG for extended config space
[    0.526346] PCI: Using configuration type 1 for base access
[    0.528019] bio: create slab <bio-0> at 0
[    0.528152] ACPI: Added _OSI(Module Device)
[    0.528156] ACPI: Added _OSI(Processor Device)
[    0.528162] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.528165] ACPI: Added _OSI(Processor Aggregator Device)
[    0.531611] ACPI: EC: Look up EC in DSDT
[    0.543190] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.543792] ACPI: SSDT bb71ac18 002A6 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.544639] ACPI: Dynamic OEM Table Load:
[    0.544644] ACPI: SSDT   (null) 002A6 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.544898] ACPI: SSDT bb718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.545707] ACPI: Dynamic OEM Table Load:
[    0.545711] ACPI: SSDT   (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.612189] ACPI: SSDT bb719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.613139] ACPI: Dynamic OEM Table Load:
[    0.613144] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.643920] ACPI: SSDT bb717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.644790] ACPI: Dynamic OEM Table Load:
[    0.644795] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.677505] ACPI: Interpreter enabled
[    0.677519] ACPI: (supports S0 S3 S4 S5)
[    0.677560] ACPI: Using IOAPIC for interrupt routing
[    0.689369] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.689669] ACPI: No dock devices found.
[    0.689672] HEST: Table not found.
[    0.689679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.690328] \_SB_.PCI0:_OSC invalid UUID
[    0.690331] _OSC request data:1 8 1f 
[    0.690338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.691344] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.691349] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.691353] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.691358] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.691361] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.691365] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.691370] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    0.691392] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.691424] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.691460] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.691480] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.691492] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.691501] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
[    0.691605] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.691653] pci 0000:00:16.0: reg 10: [mem 0xf0704000-0xf070400f 64bit]
[    0.691812] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.691820] pci 0000:00:16.0: PME# disabled
[    0.691881] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.691920] pci 0000:00:1a.0: reg 10: [mem 0xf0706000-0xf07063ff]
[    0.692079] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.692086] pci 0000:00:1a.0: PME# disabled
[    0.692132] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.692163] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.692305] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.692312] pci 0000:00:1b.0: PME# disabled
[    0.692352] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.692504] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.692511] pci 0000:00:1c.0: PME# disabled
[    0.692554] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.692705] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.692712] pci 0000:00:1c.1: PME# disabled
[    0.692759] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    0.692909] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.692916] pci 0000:00:1c.4: PME# disabled
[    0.692957] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    0.693109] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.693116] pci 0000:00:1c.5: PME# disabled
[    0.693169] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.693206] pci 0000:00:1d.0: reg 10: [mem 0xf0707000-0xf07073ff]
[    0.693365] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.693373] pci 0000:00:1d.0: PME# disabled
[    0.693407] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.693530] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    0.693718] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    0.693758] pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
[    0.693774] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
[    0.693790] pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
[    0.693806] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
[    0.693822] pci 0000:00:1f.2: reg 20: [io  0x1820-0x183f]
[    0.693839] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.693940] pci 0000:00:1f.2: PME# supported from D3hot
[    0.693946] pci 0000:00:1f.2: PME# disabled
[    0.693982] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.694013] pci 0000:00:1f.3: reg 10: [mem 0xf0709000-0xf07090ff 64bit]
[    0.694056] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    0.694127] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.694169] pci 0000:00:1f.6: reg 10: [mem 0xf070a000-0xf070afff 64bit]
[    0.694397] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.694531] pci 0000:03:00.0: [10ec:8176] type 0 class 0x000280
[    0.694562] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
[    0.694612] pci 0000:03:00.0: reg 18: [mem 0xf0400000-0xf0403fff 64bit]
[    0.694769] pci 0000:03:00.0: supports D1 D2
[    0.694773] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.694781] pci 0000:03:00.0: PME# disabled
[    0.699732] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.699740] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.699747] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.699840] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[    0.700026] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
[    0.700099] pci 0000:09:00.0: reg 10: [io  0x3000-0x30ff]
[    0.700223] pci 0000:09:00.0: reg 18: [mem 0xf0804000-0xf0804fff 64bit pref]
[    0.700300] pci 0000:09:00.0: reg 20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    0.700351] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.700640] pci 0000:09:00.0: supports D1 D2
[    0.700643] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.700673] pci 0000:09:00.0: PME# disabled
[    0.700856] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    0.700863] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.700877] pci 0000:00:1c.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.700989] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[    0.701007] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.701011] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.701015] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.701019] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.701023] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.701027] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.701032] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.701077] pci_bus 0000:00: on NUMA node 0
[    0.701083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.701426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.701655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.701753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.701856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.701951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.702126] \_SB_.PCI0:_OSC invalid UUID
[    0.702129] _OSC request data:1 1f 1f 
[    0.702136]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.702195] \_SB_.PCI0:_OSC invalid UUID
[    0.702197] _OSC request data:1 0 1d 
[    0.702204]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.702207] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.710192] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.710310] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    0.710349] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.710386] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.710418] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.710450] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.710481] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.710530] pci_bus 0000:ff: on NUMA node 0
[    0.710543]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    0.710548]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.710551] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.710987] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.711067] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.711145] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.711221] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.711300] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.711377] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.711455] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.711532] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.711733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.711750] vgaarb: loaded
[    0.711752] vgaarb: bridge control possible 0000:00:02.0
[    0.711923] i2c-core: driver [aat2870] using legacy suspend method
[    0.711926] i2c-core: driver [aat2870] using legacy resume method
[    0.712049] SCSI subsystem initialized
[    0.712138] libata version 3.00 loaded.
[    0.712207] usbcore: registered new interface driver usbfs
[    0.712225] usbcore: registered new interface driver hub
[    0.712269] usbcore: registered new device driver usb
[    0.712412] PCI: Using ACPI for IRQ routing
[    0.724439] PCI: pci_cache_line_size set to 64 bytes
[    0.724580] reserve RAM buffer: 000000000009c400 - 000000000009ffff 
[    0.724584] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff 
[    0.724593] reserve RAM buffer: 00000000bb3ed000 - 00000000bbffffff 
[    0.724600] reserve RAM buffer: 00000000bb46f000 - 00000000bbffffff 
[    0.724607] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff 
[    0.724613] reserve RAM buffer: 00000000bb77f000 - 00000000bbffffff 
[    0.724618] reserve RAM buffer: 00000000bb7e1000 - 00000000bbffffff 
[    0.724622] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff 
[    0.724781] NetLabel: Initializing
[    0.724784] NetLabel:  domain hash size = 128
[    0.724787] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.724802] NetLabel:  unlabeled traffic allowed by default
[    0.724894] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.724905] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.726935] Switching to clocksource hpet
[    0.738434] AppArmor: AppArmor Filesystem Enabled
[    0.738476] pnp: PnP ACPI init
[    0.738503] ACPI: bus type pnp registered
[    0.739084] pnp 00:00: [bus 00-fe]
[    0.739089] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.739093] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.739097] pnp 00:00: [io  0x0d00-0xffff window]
[    0.739100] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.739104] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.739107] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.739111] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.739114] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.739118] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.739121] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.739125] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.739128] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.739132] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.739135] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.739139] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.739142] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.739146] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.739149] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    0.739153] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.739280] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.739349] pnp 00:01: [io  0x0000-0x001f]
[    0.739353] pnp 00:01: [io  0x0081-0x0091]
[    0.739356] pnp 00:01: [io  0x0093-0x009f]
[    0.739359] pnp 00:01: [io  0x00c0-0x00df]
[    0.739363] pnp 00:01: [dma 4]
[    0.739410] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.739424] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.739467] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.739590] pnp 00:03: [irq 0 disabled]
[    0.739607] pnp 00:03: [irq 8]
[    0.739610] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.739657] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.739674] pnp 00:04: [io  0x00f0]
[    0.739683] pnp 00:04: [irq 13]
[    0.739730] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.739749] pnp 00:05: [io  0x002e-0x002f]
[    0.739753] pnp 00:05: [io  0x004e-0x004f]
[    0.739755] pnp 00:05: [io  0x0061]
[    0.739758] pnp 00:05: [io  0x0063]
[    0.739761] pnp 00:05: [io  0x0065]
[    0.739764] pnp 00:05: [io  0x0067]
[    0.739766] pnp 00:05: [io  0x0070]
[    0.739769] pnp 00:05: [io  0x0080]
[    0.739772] pnp 00:05: [io  0x0092]
[    0.739775] pnp 00:05: [io  0x00b2-0x00b3]
[    0.739778] pnp 00:05: [io  0x0680-0x069f]
[    0.739781] pnp 00:05: [io  0x0500-0x050f]
[    0.739784] pnp 00:05: [io  0x0600-0x0603]
[    0.739787] pnp 00:05: [io  0xffff]
[    0.739789] pnp 00:05: [io  0x0400-0x047f]
[    0.739793] pnp 00:05: [io  0x1180-0x11ff]
[    0.739796] pnp 00:05: [io  0x1600-0x16fe]
[    0.739798] pnp 00:05: [io  0xfe00]
[    0.739801] pnp 00:05: [io  0x0068]
[    0.739804] pnp 00:05: [io  0x006c]
[    0.739807] pnp 00:05: [io  0x0700-0x070f]
[    0.739909] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.739914] system 00:05: [io  0x0500-0x050f] has been reserved
[    0.739918] system 00:05: [io  0x0600-0x0603] has been reserved
[    0.739922] system 00:05: [io  0xffff] has been reserved
[    0.739926] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.739930] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.739934] system 00:05: [io  0x1600-0x16fe] has been reserved
[    0.739938] system 00:05: [io  0xfe00] has been reserved
[    0.739942] system 00:05: [io  0x0700-0x070f] has been reserved
[    0.739947] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.739996] pnp 00:06: [io  0x06a0-0x06af]
[    0.740000] pnp 00:06: [io  0x06b0-0x06ff]
[    0.740070] system 00:06: [io  0x06a0-0x06af] has been reserved
[    0.740074] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    0.740079] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.740125] pnp 00:07: [io  0x0070-0x0077]
[    0.740180] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.740198] pnp 00:08: [io  0x0060]
[    0.740201] pnp 00:08: [io  0x0064]
[    0.740209] pnp 00:08: [irq 1]
[    0.740256] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.740275] pnp 00:09: [irq 12]
[    0.740326] pnp 00:09: Plug and Play ACPI device, IDs LEN0019 PNP0f13 (active)
[    0.740786] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.740790] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[    0.740793] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.740797] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.740800] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.740804] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.740808] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[    0.740811] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.740815] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[    0.740818] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    0.740822] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    0.740825] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.740828] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.740933] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.740938] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.740942] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.740946] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.740953] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.740958] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.740962] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.740967] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.740971] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.740975] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.740980] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.740985] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.741235] pnp 00:0b: [bus ff]
[    0.741310] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.741655] pnp: PnP ACPI: found 12 devices
[    0.741658] ACPI: ACPI bus type pnp unregistered
[    0.741663] PnPBIOS: Disabled by ACPI PNP
[    0.780838] PCI: max bus depth: 1 pci_try_num: 2
[    0.780931] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0000000-0xc00fffff]
[    0.780938] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0000000-0xc04fffff]
[    0.780944] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0500000-0xc06fffff]
[    0.780951] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.780959] pci 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
[    0.780965] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0900000-0xc0afffff 64bit pref]
[    0.780971] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0b00000-0xc0cfffff]
[    0.780978] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0d00000-0xc0efffff 64bit pref]
[    0.780984] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.780988] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.780994] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.781003] pci 0000:00:1c.0:   bridge window [mem 0xc0b00000-0xc0cfffff]
[    0.781011] pci 0000:00:1c.0:   bridge window [mem 0xc0d00000-0xc0efffff 64bit pref]
[    0.781023] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.781028] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.781038] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.781046] pci 0000:00:1c.1:   bridge window [mem 0xc0900000-0xc0afffff 64bit pref]
[    0.781057] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[    0.781062] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.781072] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc06fffff]
[    0.781080] pci 0000:00:1c.4:   bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.781094] pci 0000:09:00.0: BAR 6: assigned [mem 0xf0820000-0xf083ffff pref]
[    0.781098] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    0.781104] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.781113] pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc04fffff]
[    0.781120] pci 0000:00:1c.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.781132] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[    0.781182] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.781191] pci 0000:00:1c.0: setting latency timer to 64
[    0.781209] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.781216] pci 0000:00:1c.1: setting latency timer to 64
[    0.781228] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.781235] pci 0000:00:1c.4: setting latency timer to 64
[    0.781246] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.781253] pci 0000:00:1c.5: setting latency timer to 64
[    0.781266] pci 0000:00:1e.0: setting latency timer to 64
[    0.781273] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.781276] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.781280] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.781284] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.781287] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.781291] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.781294] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[    0.781298] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.781302] pci_bus 0000:02: resource 1 [mem 0xc0b00000-0xc0cfffff]
[    0.781306] pci_bus 0000:02: resource 2 [mem 0xc0d00000-0xc0efffff 64bit pref]
[    0.781310] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.781313] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.781317] pci_bus 0000:03: resource 2 [mem 0xc0900000-0xc0afffff 64bit pref]
[    0.781321] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.781325] pci_bus 0000:08: resource 1 [mem 0xc0500000-0xc06fffff]
[    0.781328] pci_bus 0000:08: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.781332] pci_bus 0000:09: resource 0 [io  0x3000-0x3fff]
[    0.781336] pci_bus 0000:09: resource 1 [mem 0xc0000000-0xc04fffff]
[    0.781339] pci_bus 0000:09: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.781344] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
[    0.781347] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
[    0.781351] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[    0.781354] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.781358] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.781361] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
[    0.781365] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfeafffff]
[    0.781425] NET: Registered protocol family 2
[    0.781520] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.781804] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.782255] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.782440] TCP: Hash tables configured (established 131072 bind 65536)
[    0.782444] TCP reno registered
[    0.782447] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.782456] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.782544] NET: Registered protocol family 1
[    0.782564] pci 0000:00:02.0: Boot video device
[    0.782582] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.782624] pci 0000:00:1a.0: PCI INT A disabled
[    0.782662] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.782687] pci 0000:00:1d.0: PCI INT A disabled
[    0.782735] PCI: CLS 64 bytes, default 64
[    0.782743] Simple Boot Flag at 0x36 set to 0x1
[    0.783609] audit: initializing netlink socket (disabled)
[    0.783622] type=2000 audit(1331800468.596:1): initialized
[    0.829979] highmem bounce pool size: 64 pages
[    0.829988] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.845878] VFS: Disk quotas dquot_6.5.2
[    0.846001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.846910] fuse init (API version 7.17)
[    0.847074] msgmni has been set to 1605
[    0.847798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.847851] io scheduler noop registered
[    0.847856] io scheduler deadline registered
[    0.847868] io scheduler cfq registered (default)
[    0.848372] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.848408] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.848504] intel_idle: MWAIT substates: 0x1120
[    0.848507] intel_idle: v0.4 model 0x25
[    0.848509] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.949397] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.048005] ACPI: AC Adapter [ACAD] (off-line)
[    1.048222] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.048851] ACPI: Lid Switch [LID]
[    1.048932] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.048939] ACPI: Power Button [PWRB]
[    1.049006] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.049011] ACPI: Power Button [PWRF]
[    1.256858] Freeing initrd memory: 19580k freed
[    1.779345] Refined TSC clocksource calibration: 1329.990 MHz.
[    1.779354] Switching to clocksource tsc
[    2.561262] thermal LNXTHERM:00: registered as thermal_zone0
[    2.561267] ACPI: Thermal Zone [TZ00] (58 C)
[    2.561328] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    2.561341] ACPI: Battery Slot [BAT1] (battery present)
[    2.561389] ERST: Table is not found!
[    2.561393] GHES: HEST is not enabled!
[    2.561544] isapnp: Scanning for PnP cards...
[    2.561609] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.916195] isapnp: No Plug & Play device found
[    3.110181] ACPI: Battery Slot [BAT1] (battery present)
[    3.116479] Linux agpgart interface v0.103
[    3.116638] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.116858] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.118365] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.118567] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    3.120977] brd: module loaded
[    3.122176] loop: module loaded
[    3.122391] ahci 0000:00:1f.2: version 3.0
[    3.122425] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.122502] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    3.122546] ahci: SSS flag set, parallel bus scan disabled
[    3.122591] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[    3.122597] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    3.122606] ahci 0000:00:1f.2: setting latency timer to 64
[    3.128163] scsi0 : ahci
[    3.128296] scsi1 : ahci
[    3.128405] scsi2 : ahci
[    3.128515] scsi3 : ahci
[    3.128625] scsi4 : ahci
[    3.128964] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[    3.128968] ata2: DUMMY
[    3.128970] ata3: DUMMY
[    3.128972] ata4: DUMMY
[    3.128976] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[    3.129600] Fixed MDIO Bus: probed
[    3.129637] tun: Universal TUN/TAP device driver, 1.6
[    3.129640] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.129707] PPP generic driver version 2.4.2
[    3.129845] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.129869] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.129893] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.129899] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    3.129967] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.130004] ehci_hcd 0000:00:1a.0: debug port 2
[    3.133915] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    3.133939] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0706000
[    3.147435] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.147644] hub 1-0:1.0: USB hub found
[    3.147651] hub 1-0:1.0: 3 ports detected
[    3.147756] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.147776] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.147781] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    3.147844] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.147881] ehci_hcd 0000:00:1d.0: debug port 2
[    3.151768] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    3.151789] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0707000
[    3.167436] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.167630] hub 2-0:1.0: USB hub found
[    3.167639] hub 2-0:1.0: 3 ports detected
[    3.167740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.167760] uhci_hcd: USB Universal Host Controller Interface driver
[    3.167835] usbcore: registered new interface driver libusual
[    3.167909] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.172032] i8042: Detected active multiplexing controller, rev 1.1
[    3.174461] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.174470] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.174519] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.174556] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.174594] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.174768] mousedev: PS/2 mouse device common for all mice
[    3.175015] rtc_cmos 00:07: RTC can wake from S4
[    3.175152] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    3.175190] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.175280] device-mapper: uevent: version 1.0.3
[    3.175387] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.175442] EISA: Probing bus 0 at eisa.0
[    3.175446] EISA: Cannot allocate resource for mainboard
[    3.175449] Cannot allocate resource for EISA slot 1
[    3.175452] Cannot allocate resource for EISA slot 2
[    3.175454] Cannot allocate resource for EISA slot 3
[    3.175457] Cannot allocate resource for EISA slot 4
[    3.175459] Cannot allocate resource for EISA slot 5
[    3.175462] Cannot allocate resource for EISA slot 6
[    3.175465] Cannot allocate resource for EISA slot 7
[    3.175467] Cannot allocate resource for EISA slot 8
[    3.175470] EISA: Detected 0 cards.
[    3.175482] cpufreq-nforce2: No nForce2 chipset.
[    3.175664] cpuidle: using governor ladder
[    3.175944] cpuidle: using governor menu
[    3.175947] EFI Variables Facility v0.08 2004-May-17
[    3.176285] TCP cubic registered
[    3.176487] NET: Registered protocol family 10
[    3.177254] NET: Registered protocol family 17
[    3.177276] Registering the dns_resolver key type
[    3.177304] Using IPI No-Shortcut mode
[    3.177552] PM: Hibernation image not present or could not be loaded.
[    3.177576] registered taskstats version 1
[    3.204303]   Magic number: 4:982:573
[    3.204561] rtc_cmos 00:07: setting system clock to 2012-03-15 08:34:31 UTC (1331800471)
[    3.206719] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.206722] EDD information not available.
[    3.216452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    3.447542] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.448470] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.448478] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.448967] ata1.00: ATA-8: HITACHI HTS545050B9A300, PB4ZC61H, max UDMA/100
[    3.448973] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.450118] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.450125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.450614] ata1.00: configured for UDMA/100
[    3.450856] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54505 PB4Z PQ: 0 ANSI: 5
[    3.451122] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.451133] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.451301] sd 0:0:0:0: [sda] Write Protect is off
[    3.451309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.451380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.459530] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    3.509559]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    3.511377] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.592686] hub 1-1:1.0: USB hub found
[    3.592881] hub 1-1:1.0: 6 ports detected
[    3.703599] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    3.767566] ata5: SATA link down (SStatus 0 SControl 300)
[    3.767846] Freeing unused kernel memory: 740k freed
[    3.768209] Write protecting the kernel text: 5824k
[    3.768287] Write protecting the kernel read-only data: 2376k
[    3.768289] NX-protecting the kernel data: 4416k
[    3.800233] udevd[109]: starting version 175
[    3.836797] hub 2-1:1.0: USB hub found
[    3.836986] hub 2-1:1.0: 8 ports detected
[    3.907839] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[    4.023271] Initializing USB Mass Storage driver...
[    4.023340] usbcore: registered new interface driver usb-storage
[    4.023343] USB Mass Storage support registered.
[    4.091820] usb 1-1.6: new full-speed USB device number 4 using ehci_hcd
[    4.259832] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[    4.468068] [drm] Initialized drm 1.1.0 20060810
[    4.482819] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.482830] i915 0000:00:02.0: setting latency timer to 64
[    4.484491] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.484534] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.484644] r8169 0000:09:00.0: setting latency timer to 64
[    4.485198] r8169 0000:09:00.0: irq 41 for MSI/MSI-X
[    4.486812] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xf842e000, 60:eb:69:d9:bc:66, XID 083000c0 IRQ 41
[    4.486820] r8169 0000:09:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.527522] usbcore: registered new interface driver uas
[    4.542006] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    4.542016] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.542019] [drm] Driver supports precise vblank timestamp query.
[    4.542069] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.546444] scsi5 : usb-storage 1-1.4:1.0
[    4.546610] usbcore: registered new interface driver ums-realtek
[    4.675443] usb 1-1.4: USB disconnect, device number 3
[    5.064329] fbcon: inteldrmfb (fb0) is primary device
[    5.064412] Console: switching to colour frame buffer device 170x48
[    5.064462] fb0: inteldrmfb frame buffer device
[    5.064465] drm: registered panic notifier
[    5.088696] acpi device:06: registered as cooling_device4
[    5.089168] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[    5.089301] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.089352] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.850965] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.480498] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.492973] udevd[365]: starting version 175
[   15.526538] lp: driver loaded but no devices found
[   15.758057] Non-volatile memory driver v1.3
[   15.788328] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   15.789074] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.789086] mei 0000:00:16.0: setting latency timer to 64
[   15.789201] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[   15.797302] cfg80211: Calling CRDA to update world regulatory domain
[   15.826429] type=1400 audit(1331796884.116:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
[   15.827649] type=1400 audit(1331796884.116:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
[   15.828354] type=1400 audit(1331796884.116:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[   15.829633] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[   15.829677] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   15.834409] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   15.841639] rtl8192ce 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.841655] rtl8192ce 0000:03:00.0: setting latency timer to 64
[   15.871080] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.871197] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   15.871254] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   15.897155] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[   15.897161] thinkpad_acpi: http://ibm-acpi.sf.net/
[   15.897166] thinkpad_acpi: ThinkPad BIOS 84ET23WW (1.07 ), EC 84HT19WW-1.165000
[   15.897171] thinkpad_acpi: Lenovo ThinkPad Edge, model 02173BG
[   15.898726] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   15.942373] thinkpad_acpi: radio switch found; radios are enabled
[   15.942405] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   15.947120] thinkpad_acpi: asked for hotkey mask 0x04018070, but firmware forced it to 0x00018070
[   15.951307] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[   15.951476] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.045178] Bluetooth: Core ver 2.16
[   16.045503] NET: Registered protocol family 31
[   16.045508] Bluetooth: HCI device and connection manager initialized
[   16.045514] Bluetooth: HCI socket layer initialized
[   16.045519] Bluetooth: L2CAP socket layer initialized
[   16.045530] Bluetooth: SCO socket layer initialized
[   16.046260] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   16.068262] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   16.068857] usbcore: registered new interface driver btusb
[   16.069862] Registered led device: tpacpi::thinklight
[   16.069977] Registered led device: tpacpi::power
[   16.070013] Registered led device: tpacpi::standby
[   16.070054] Registered led device: tpacpi::thinkvantage
[   16.078990] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   16.079402] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   16.086665] Linux video capture interface: v2.00
[   16.087637] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1fc)
[   16.089396] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[   16.094286] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input7
[   16.094795] usbcore: registered new interface driver uvcvideo
[   16.094800] USB Video Class driver (1.1.1)
[   16.107496] cfg80211: World regulatory domain updated:
[   16.107502] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.107509] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.107515] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.107520] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.107526] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.107532] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.138405] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   16.138414] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138420] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   16.138426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138432] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   16.138438] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138443] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   16.138449] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138453] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   16.138457] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138461] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   16.138465] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138468] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   16.138473] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138476] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   16.138480] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138483] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   16.138488] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138491] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   16.138495] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138498] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   16.138503] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138506] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   16.138510] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138513] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   16.138518] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.138521] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   16.138813] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   16.142641] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   16.143544] rtlwifi: wireless switch is on
[   16.187302] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   16.839383] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[   16.839399] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   16.887395] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   16.888310] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.220492] usb 1-1.6: USB disconnect, device number 4
[   17.220713] Bluetooth: hci0 urb f1bdccc0 submission failed
[   17.284750] Bluetooth: RFCOMM TTY layer initialized
[   17.284761] Bluetooth: RFCOMM socket layer initialized
[   17.284764] Bluetooth: RFCOMM ver 1.11
[   17.348402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.348410] Bluetooth: BNEP filters: protocol multicast
[   17.386247] ppdev: user-space parallel port driver
[   17.472994] bluetoothd[891]: segfault at 4 ip b76efedc sp bff995a0 error 4 in bluetoothd[b769c000+d2000]
[   17.490169] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   17.830107] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.831130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.900419] r8169 0000:09:00.0: eth0: link down
[   17.901151] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.901593] init: bluetooth main process (891) killed by SEGV signal
[   17.901645] init: bluetooth main process ended, respawning
[   17.901883] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.063992] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   18.683011] Adding 3905532k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:3905532k 
[   18.890790] type=1400 audit(1331796887.180:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=909 comm="apparmor_parser"
[   19.269409] type=1400 audit(1331796887.560:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=910 comm="apparmor_parser"
[   19.269667] type=1400 audit(1331796887.560:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=910 comm="apparmor_parser"
[   19.269853] type=1400 audit(1331796887.560:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=910 comm="apparmor_parser"
[   19.475806] type=1400 audit(1331796887.764:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=946 comm="apparmor_parser"
[   19.476553] type=1400 audit(1331796887.764:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=946 comm="apparmor_parser"
[   21.312689] audit_printk_skb: 9 callbacks suppressed
[   21.312694] type=1400 audit(1331796889.600:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1026 comm="apparmor_parser"
[   21.313304] type=1400 audit(1331796889.604:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1026 comm="apparmor_parser"
[   23.306139] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   23.557016] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input9
[   33.024263] type=1400 audit(1331796901.312:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=911 comm="apparmor_parser"
[   33.025384] type=1400 audit(1331796901.312:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=911 comm="apparmor_parser"
[   33.025846] type=1400 audit(1331796901.312:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=911 comm="apparmor_parser"
[   33.027221] type=1400 audit(1331796901.316:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=911 comm="apparmor_parser"
[   33.028090] type=1400 audit(1331796901.316:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=911 comm="apparmor_parser"
[   33.028551] type=1400 audit(1331796901.316:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=911 comm="apparmor_parser"
[   33.029373] type=1400 audit(1331796901.316:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=911 comm="apparmor_parser"
[   33.029974] type=1400 audit(1331796901.316:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=911 comm="apparmor_parser"
[   33.150751] init: failsafe main process (846) killed by TERM signal
[   33.156550] init: hybrid-gfx main process (1112) terminated with status 127
[   33.342303] vboxdrv: Found 4 processor cores.
[   33.342537] vboxdrv: fAsync=0 offMin=0x232 offMax=0xb9e
[   33.342651] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   33.342655] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[   33.556129] vboxpci: IOMMU not found (not registered)
[   34.906663] init: plymouth-stop pre-start process (1596) terminated with status 1
[   38.192440] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   68.195311] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[  108.199066] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[  158.203762] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[  180.016908] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[  181.225688] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[  181.227545] wlan0: authenticated
[  181.250794] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[  181.264198] wlan0: RX AssocResp from 06:0b:0a:fa:55:39 (capab=0x11 status=0 aid=100)
[  181.264206] wlan0: associated
[  181.264931] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  181.265078] cfg80211: Calling CRDA for country: DK
[  181.279285] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  181.279292] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279297] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  181.279301] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279304] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  181.279309] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279312] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  181.279316] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279320] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  181.279324] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279327] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  181.279331] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279335] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  181.279339] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279342] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  181.279346] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279350] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  181.279354] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279357] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  181.279361] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279365] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  181.279369] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279372] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  181.279377] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279380] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  181.279384] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  181.279388] cfg80211: Disabling freq 2484 MHz
[  181.279394] cfg80211: Regulatory domain changed to country: DK
[  181.279397] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  181.279401] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  181.279404] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  181.279408] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  181.279411] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  192.072486] wlan0: no IPv6 routers present
[ 2949.349848] wlan0: deauthenticating from 06:0b:0a:fa:55:39 by local choice (reason=3)
[ 2949.489274] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2949.489290] cfg80211: Restoring regulatory settings
[ 2949.489303] cfg80211: Calling CRDA to update world regulatory domain
[ 2949.502669] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2949.502677] cfg80211: World regulatory domain updated:
[ 2949.502680] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2949.502686] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2949.502692] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2949.502697] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2949.502702] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2949.502708] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2949.549872] r8169 0000:09:00.0: PME# enabled
[ 2950.573821] r8169 0000:09:00.0: PME# disabled
[ 2952.819448] PM: Syncing filesystems ... done.
[ 2952.834702] PM: Preparing system for mem sleep
[ 2953.521785] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2953.537611] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
[ 2953.569585] PM: Entering mem sleep
[ 2953.569651] Suspending console(s) (use no_console_suspend to debug)
[ 2953.727530] PM: suspend of drv:psmouse dev:serio5 complete after 157.683 msecs
[ 2953.727850] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2953.727992] sd 0:0:0:0: [sda] Stopping disk
[ 2953.833603] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 2953.833612] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 2953.890145] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 2953.905625] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 117.156 msecs
[ 2954.155234] PM: suspend of drv:sd dev:0:0:0:0 complete after 427.354 msecs
[ 2954.155324] PM: suspend of drv:scsi dev:target0:0:0 complete after 427.397 msecs
[ 2954.155402] PM: suspend of drv:scsi dev:host0 complete after 367.183 msecs
[ 2954.169648] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 381.309 msecs
[ 2954.169670] PM: suspend of drv: dev:pci0000:00 complete after 381.000 msecs
[ 2954.169714] PM: suspend of devices complete after 599.845 msecs
[ 2954.169719] PM: suspend devices took 0.600 seconds
[ 2954.170184] r8169 0000:09:00.0: PME# enabled
[ 2954.170263] r8169 0000:09:00.0: wake-up capability enabled by ACPI
[ 2954.201881] ehci_hcd 0000:00:1d.0: PME# enabled
[ 2954.201931] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 2954.217678] ehci_hcd 0000:00:1a.0: PME# enabled
[ 2954.217733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 2954.249663] PM: late suspend of devices complete after 79.930 msecs
[ 2954.249883] ACPI: Preparing to enter system sleep state S3
[ 2954.433695] PM: Saving platform NVS memory
[ 2954.434930] Disabling non-boot CPUs ...
[ 2954.537732] CPU 1 is now offline
[ 2954.641660] CPU 2 is now offline
[ 2954.643106] Broke affinity for irq 1
[ 2954.643134] Broke affinity for irq 16
[ 2954.745668] CPU 3 is now offline
[ 2954.746240] Extended CMOS year: 2000
[ 2954.746520] ACPI: Low-level resume complete
[ 2954.746590] PM: Restoring platform NVS memory
[ 2954.747085] CPU0: Thermal monitoring handled by SMI
[ 2954.747150] Extended CMOS year: 2000
[ 2954.747219] Enabling non-boot CPUs ...
[ 2954.747398] Booting Node 0 Processor 1 APIC 0x4
[ 2954.747401] smpboot cpu 1: start_ip = 98000
[ 2954.757678] Initializing CPU#1
[ 2954.758435] Calibrating delay loop (skipped) already calibrated this CPU
[ 2954.758467] CPU1: Thermal monitoring handled by SMI
[ 2954.778936] NMI watchdog enabled, takes one hw-pmu counter.
[ 2954.779367] CPU1 is up
[ 2954.779484] Booting Node 0 Processor 2 APIC 0x1
[ 2954.779486] smpboot cpu 2: start_ip = 98000
[ 2954.789681] Initializing CPU#2
[ 2954.790564] Calibrating delay loop (skipped) already calibrated this CPU
[ 2954.790600] CPU2: Thermal monitoring handled by SMI
[ 2954.811202] NMI watchdog enabled, takes one hw-pmu counter.
[ 2954.811682] CPU2 is up
[ 2954.811820] Booting Node 0 Processor 3 APIC 0x5
[ 2954.811822] smpboot cpu 3: start_ip = 98000
[ 2954.822015] Initializing CPU#3
[ 2954.822854] Calibrating delay loop (skipped) already calibrated this CPU
[ 2954.822888] CPU3: Thermal monitoring handled by SMI
[ 2954.843824] NMI watchdog enabled, takes one hw-pmu counter.
[ 2954.844509] CPU3 is up
[ 2954.848642] ACPI: Waking up from system sleep state S3
[ 2955.002795] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 2955.002807] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x1801)
[ 2955.002813] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
[ 2955.002818] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0000004)
[ 2955.002825] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407)
[ 2955.002928] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 2955.002955] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0706000)
[ 2955.002967] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 2955.003030] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 2955.003038] ehci_hcd 0000:00:1a.0: PME# disabled
[ 2955.003067] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 2955.003095] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0700004)
[ 2955.003103] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2955.003112] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
[ 2955.003163] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
[ 2955.003181] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc0e1c0d1)
[ 2955.003188] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xc0c0c0b0)
[ 2955.003196] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[ 2955.003203] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x10107, writing 0x20200)
[ 2955.003214] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2955.003223] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.003282] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 2955.003300] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc0a1c091)
[ 2955.003307] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
[ 2955.003315] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[ 2955.003328] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2955.003338] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.003396] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[ 2955.003413] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xc081c071)
[ 2955.003421] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xc060c050)
[ 2955.003428] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 2955.003441] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2955.003451] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.003508] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 2955.003525] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xf081f081)
[ 2955.003532] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xc040c000)
[ 2955.003540] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[ 2955.003553] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2955.003562] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.003615] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 2955.003643] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0707000)
[ 2955.003654] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 2955.003709] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 2955.003717] ehci_hcd 0000:00:1d.0: PME# disabled
[ 2955.003733] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[ 2955.003750] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 2955.003758] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 2955.003765] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 2955.003782] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.003873] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 2955.003906] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 2955.004006] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 2955.004103] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 2955.004134] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf0400004)
[ 2955.004146] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
[ 2955.004154] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2955.004166] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 2955.004316] r8169 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 2955.004374] r8169 0000:09:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf080000c)
[ 2955.004398] r8169 0000:09:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf080400c)
[ 2955.004423] r8169 0000:09:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
[ 2955.004439] r8169 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2955.004464] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 2955.004850] PM: early resume of devices complete after 2.131 msecs
[ 2955.005208] i915 0000:00:02.0: setting latency timer to 64
[ 2955.005221] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2955.005237] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2955.005271] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 2955.005286] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2955.005298] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 2955.005371] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2955.005407] rtlwifi: wireless switch is on
[ 2955.005474] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2955.005487] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2955.005508] pci 0000:00:1e.0: setting latency timer to 64
[ 2955.005572] ahci 0000:00:1f.2: setting latency timer to 64
[ 2955.005627] r8169 0000:09:00.0: wake-up capability disabled by ACPI
[ 2955.005651] r8169 0000:09:00.0: PME# disabled
[ 2955.007990] sd 0:0:0:0: [sda] Starting disk
[ 2955.109232] PM: resume of drv:ac dev:ACPI0003:00 complete after 103.959 msecs
[ 2955.182577] PM: resume of drv:hub dev:1-1:1.0 complete after 174.575 msecs
[ 2955.182587] PM: resume of drv: dev:ep_00 complete after 174.396 msecs
[ 2955.183749] PM: resume of drv: dev:ep_81 complete after 175.629 msecs
[ 2955.183756] PM: resume of drv: dev:ep_00 complete after 175.284 msecs
[ 2955.183765] PM: resume of drv:hub dev:2-1:1.0 complete after 175.419 msecs
[ 2955.183781] PM: resume of drv: dev:ep_81 complete after 175.406 msecs
[ 2955.258848] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 2955.330642] ata5: SATA link down (SStatus 0 SControl 300)
[ 2955.361257] PM: resume of drv: dev:ep_00 complete after 352.446 msecs
[ 2955.361264] PM: resume of drv:uvcvideo dev:2-1.4:1.1 complete after 352.475 msecs
[ 2955.361274] PM: resume of drv:uvcvideo dev:2-1.4:1.0 complete after 352.539 msecs
[ 2955.361292] PM: resume of drv: dev:ep_81 complete after 352.536 msecs
[ 2955.496635] PM: resume of drv:i915 dev:0000:00:02.0 complete after 491.402 msecs
[ 2957.174857] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2957.175949] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2957.175956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2957.181126] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2957.181132] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2957.181774] ata1.00: configured for UDMA/100
[ 2957.212177] PM: resume of drv:sd dev:0:0:0:0 complete after 2206.241 msecs
[ 2957.212254] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2204.074 msecs
[ 2957.212268] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2023.757 msecs
[ 2957.215867] PM: resume of devices complete after 2210.675 msecs
[ 2957.215997] PM: resume devices took 2.212 seconds
[ 2957.216046] PM: Finishing wakeup.
[ 2957.216049] Restarting tasks ... done.
[ 2957.276657] video LNXVIDEO:01: Restoring backlight state
[ 2958.422393] r8169 0000:09:00.0: PME# enabled
[ 2958.534358] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 2958.874923] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2958.891409] r8169 0000:09:00.0: PME# disabled
[ 2958.940473] r8169 0000:09:00.0: eth0: link down
[ 2958.940870] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2959.034239] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 2979.498707] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 2994.045472] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3000.249017] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3006.447881] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3012.651602] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3013.862106] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 3013.867898] wlan0: authenticated
[ 3013.870425] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 3014.067908] wlan0: associate with 06:0b:0a:fa:55:39 (try 2)
[ 3014.267901] wlan0: associate with 06:0b:0a:fa:55:39 (try 3)
[ 3014.467925] wlan0: association with 06:0b:0a:fa:55:39 timed out
[ 3019.548478] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3025.746181] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3026.945259] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 3027.145094] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 2)
[ 3027.345092] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 3)
[ 3027.545314] wlan0: authentication with 06:0b:0a:fa:55:39 timed out
[ 3032.575441] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3038.783302] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3044.981886] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3046.186499] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 3046.188053] wlan0: authenticated
[ 3046.188350] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 3046.194782] wlan0: RX AssocResp from 06:0b:0a:fa:55:39 (capab=0x411 status=0 aid=25)
[ 3046.194790] wlan0: associated
[ 3046.195553] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3046.195680] cfg80211: Calling CRDA for country: DK
[ 3046.212135] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212144] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212150] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212156] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212161] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212167] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212173] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212180] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212186] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212192] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212197] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212204] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212209] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212215] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212220] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212227] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212232] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212239] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212252] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212258] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212264] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212271] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212276] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212283] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212288] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3046.212294] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3046.212299] cfg80211: Disabling freq 2484 MHz
[ 3046.212309] cfg80211: Regulatory domain changed to country: DK
[ 3046.212314] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3046.212320] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3046.212325] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3046.212330] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3046.212335] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3048.860515] wlan0: deauthenticating from 06:0b:0a:fa:55:39 by local choice (reason=3)
[ 3048.911226] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3048.911237] cfg80211: Restoring regulatory settings
[ 3048.911251] cfg80211: Calling CRDA to update world regulatory domain
[ 3048.924009] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3048.924019] cfg80211: World regulatory domain updated:
[ 3048.924023] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3048.924030] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.924036] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3048.924042] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3048.924047] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.924052] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3049.504423] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3052.946190] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3054.141921] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 3054.146526] wlan0: authenticated
[ 3054.157659] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 3054.355513] wlan0: associate with 06:0b:0a:fa:55:39 (try 2)
[ 3054.555568] wlan0: associate with 06:0b:0a:fa:55:39 (try 3)
[ 3054.755552] wlan0: association with 06:0b:0a:fa:55:39 timed out
[ 3059.772727] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 3060.970552] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 3060.974980] wlan0: authenticated
[ 3060.975289] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 3060.980115] wlan0: RX ReassocResp from 06:0b:0a:fa:55:39 (capab=0x411 status=0 aid=25)
[ 3060.980123] wlan0: associated
[ 3060.980993] cfg80211: Calling CRDA for country: DK
[ 3060.990135] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990145] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990151] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990157] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990162] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990169] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990174] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990181] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990186] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990192] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990197] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990204] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990209] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990215] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990220] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990227] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990232] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990238] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990244] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990250] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990255] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990261] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990266] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990273] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990278] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3060.990284] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 3060.990289] cfg80211: Disabling freq 2484 MHz
[ 3060.990298] cfg80211: Regulatory domain changed to country: DK
[ 3060.990302] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3060.990308] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3060.990313] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3060.990319] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3060.990324] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3071.621052] wlan0: no IPv6 routers present
[ 6953.528252] wlan0: deauthenticating from 06:0b:0a:fa:55:39 by local choice (reason=3)
[ 6953.611119] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 6953.611131] cfg80211: Restoring regulatory settings
[ 6953.611145] cfg80211: Calling CRDA to update world regulatory domain
[ 6953.620001] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 6953.620009] cfg80211: World regulatory domain updated:
[ 6953.620013] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6953.620019] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6953.620025] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6953.620031] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6953.620037] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6953.620042] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6956.035874] r8169 0000:09:00.0: PME# enabled
[ 6956.191731] r8169 0000:09:00.0: PME# disabled
[ 6957.720886] PM: Syncing filesystems ... done.
[ 6957.882439] PM: Preparing system for mem sleep
[ 6958.655778] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6958.671461] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
[ 6958.703449] PM: Entering mem sleep
[ 6958.703529] Suspending console(s) (use no_console_suspend to debug)
[ 6958.865564] PM: suspend of drv:psmouse dev:serio5 complete after 161.830 msecs
[ 6958.865882] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6958.866082] sd 0:0:0:0: [sda] Stopping disk
[ 6958.971466] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 6958.971473] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 6959.028005] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 6959.043459] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.546 msecs
[ 6959.289519] PM: suspend of drv:sd dev:0:0:0:0 complete after 423.606 msecs
[ 6959.289598] PM: suspend of drv:scsi dev:target0:0:0 complete after 423.495 msecs
[ 6959.289622] PM: suspend of drv:scsi dev:host0 complete after 365.988 msecs
[ 6959.303527] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 379.752 msecs
[ 6959.303553] PM: suspend of drv: dev:pci0000:00 complete after 379.404 msecs
[ 6959.303609] PM: suspend of devices complete after 599.858 msecs
[ 6959.303613] PM: suspend devices took 0.600 seconds
[ 6959.304079] r8169 0000:09:00.0: PME# enabled
[ 6959.304162] r8169 0000:09:00.0: wake-up capability enabled by ACPI
[ 6959.335741] ehci_hcd 0000:00:1d.0: PME# enabled
[ 6959.335791] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 6959.351793] ehci_hcd 0000:00:1a.0: PME# enabled
[ 6959.351842] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 6959.383525] PM: late suspend of devices complete after 79.898 msecs
[ 6959.383746] ACPI: Preparing to enter system sleep state S3
[ 6959.563589] PM: Saving platform NVS memory
[ 6959.564850] Disabling non-boot CPUs ...
[ 6959.667538] CPU 1 is now offline
[ 6959.771590] CPU 2 is now offline
[ 6959.773607] Broke affinity for irq 23
[ 6959.875520] CPU 3 is now offline
[ 6959.876084] Extended CMOS year: 2000
[ 6959.876363] ACPI: Low-level resume complete
[ 6959.876433] PM: Restoring platform NVS memory
[ 6959.876928] CPU0: Thermal monitoring handled by SMI
[ 6959.876992] Extended CMOS year: 2000
[ 6959.877061] Enabling non-boot CPUs ...
[ 6959.877232] Booting Node 0 Processor 1 APIC 0x4
[ 6959.877235] smpboot cpu 1: start_ip = 98000
[ 6959.887511] Initializing CPU#1
[ 6959.888267] Calibrating delay loop (skipped) already calibrated this CPU
[ 6959.888300] CPU1: Thermal monitoring handled by SMI
[ 6959.908765] NMI watchdog enabled, takes one hw-pmu counter.
[ 6959.909199] CPU1 is up
[ 6959.909315] Booting Node 0 Processor 2 APIC 0x1
[ 6959.909317] smpboot cpu 2: start_ip = 98000
[ 6959.919514] Initializing CPU#2
[ 6959.920351] Calibrating delay loop (skipped) already calibrated this CPU
[ 6959.920387] CPU2: Thermal monitoring handled by SMI
[ 6959.940995] NMI watchdog enabled, takes one hw-pmu counter.
[ 6959.941477] CPU2 is up
[ 6959.941607] Booting Node 0 Processor 3 APIC 0x5
[ 6959.941610] smpboot cpu 3: start_ip = 98000
[ 6959.951805] Initializing CPU#3
[ 6959.952642] Calibrating delay loop (skipped) already calibrated this CPU
[ 6959.952676] CPU3: Thermal monitoring handled by SMI
[ 6959.973765] NMI watchdog enabled, takes one hw-pmu counter.
[ 6959.974239] CPU3 is up
[ 6959.978381] ACPI: Waking up from system sleep state S3
[ 6960.128651] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 6960.128663] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x1801)
[ 6960.128669] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
[ 6960.128675] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0000004)
[ 6960.128681] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407)
[ 6960.128783] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 6960.128809] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0706000)
[ 6960.128820] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 6960.128883] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 6960.128892] ehci_hcd 0000:00:1a.0: PME# disabled
[ 6960.128921] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6960.128949] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0700004)
[ 6960.128956] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 6960.128966] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
[ 6960.129017] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
[ 6960.129034] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc0e1c0d1)
[ 6960.129042] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xc0c0c0b0)
[ 6960.129049] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005050)
[ 6960.129056] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x10107, writing 0x20200)
[ 6960.129068] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 6960.129077] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.129136] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 6960.129153] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc0a1c091)
[ 6960.129160] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
[ 6960.129168] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[ 6960.129181] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 6960.129190] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.129248] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[ 6960.129266] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xc081c071)
[ 6960.129273] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xc060c050)
[ 6960.129280] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20004040)
[ 6960.129294] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 6960.129304] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.129361] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 6960.129379] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xf081f081)
[ 6960.129387] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xc040c000)
[ 6960.129394] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[ 6960.129407] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 6960.129416] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.129468] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6960.129496] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0707000)
[ 6960.129508] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 6960.129563] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 6960.129570] ehci_hcd 0000:00:1d.0: PME# disabled
[ 6960.129586] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[ 6960.129603] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 6960.129611] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 6960.129618] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 6960.129636] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.129726] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 6960.129759] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 6960.129860] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 6960.129958] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 6960.129990] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf0400004)
[ 6960.130002] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
[ 6960.130010] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 6960.130022] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6960.130173] r8169 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 6960.130232] r8169 0000:09:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf080000c)
[ 6960.130257] r8169 0000:09:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf080400c)
[ 6960.130281] r8169 0000:09:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
[ 6960.130298] r8169 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 6960.130322] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 6960.130714] PM: early resume of devices complete after 2.140 msecs
[ 6960.131000] i915 0000:00:02.0: setting latency timer to 64
[ 6960.131065] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6960.131076] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6960.131082] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6960.131098] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6960.131138] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6960.131148] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 6960.131156] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6960.131194] pci 0000:00:1e.0: setting latency timer to 64
[ 6960.131207] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6960.131224] ahci 0000:00:1f.2: setting latency timer to 64
[ 6960.131304] rtlwifi: wireless switch is on
[ 6960.131551] r8169 0000:09:00.0: wake-up capability disabled by ACPI
[ 6960.131569] r8169 0000:09:00.0: PME# disabled
[ 6960.131610] sd 0:0:0:0: [sda] Starting disk
[ 6960.308466] PM: resume of drv:hub dev:1-1:1.0 complete after 151.956 msecs
[ 6960.308475] PM: resume of drv: dev:ep_00 complete after 151.941 msecs
[ 6960.308488] PM: resume of drv: dev:ep_81 complete after 151.967 msecs
[ 6960.308494] PM: resume of drv:hub dev:2-1:1.0 complete after 151.955 msecs
[ 6960.308500] PM: resume of drv: dev:ep_00 complete after 151.949 msecs
[ 6960.308507] PM: resume of drv: dev:ep_81 complete after 151.960 msecs
[ 6960.380637] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 6960.386309] PM: resume of drv:ac dev:ACPI0003:00 complete after 254.593 msecs
[ 6960.448476] ata5: SATA link down (SStatus 0 SControl 300)
[ 6960.483179] Extended CMOS year: 2000
[ 6960.486692] PM: resume of drv:uvcvideo dev:2-1.4:1.0 complete after 306.835 msecs
[ 6960.486711] PM: resume of drv:uvcvideo dev:2-1.4:1.1 complete after 306.778 msecs
[ 6960.486732] PM: resume of drv: dev:ep_00 complete after 306.737 msecs
[ 6960.486740] PM: resume of drv: dev:ep_81 complete after 306.867 msecs
[ 6960.642462] PM: resume of drv:i915 dev:0000:00:02.0 complete after 511.424 msecs
[ 6962.304660] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6962.305777] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6962.305783] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6962.319172] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6962.319178] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6962.319711] ata1.00: configured for UDMA/100
[ 6962.350242] PM: resume of drv:sd dev:0:0:0:0 complete after 2218.429 msecs
[ 6962.350332] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2218.457 msecs
[ 6962.350347] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1866.943 msecs
[ 6962.352847] PM: resume of devices complete after 2221.790 msecs
[ 6962.352959] PM: resume devices took 2.224 seconds
[ 6962.353008] PM: Finishing wakeup.
[ 6962.353011] Restarting tasks ... done.
[ 6962.432750] video LNXVIDEO:01: Restoring backlight state
[ 6963.810548] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 6964.157808] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6964.218867] r8169 0000:09:00.0: eth0: link down
[ 6964.229107] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6964.393582] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 6982.840004] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 6989.047971] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 6990.255217] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 6990.257491] wlan0: authenticated
[ 6990.259965] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 6990.262351] wlan0: RX AssocResp from 06:0b:0a:fa:55:39 (capab=0x411 status=0 aid=32)
[ 6990.262359] wlan0: associated
[ 6990.263172] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6990.263296] cfg80211: Calling CRDA for country: DK
[ 6990.272553] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272562] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272568] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272574] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272580] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272587] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272592] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272598] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272603] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272610] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272614] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272620] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272625] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272631] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272636] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272642] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272647] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272653] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272658] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272665] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272670] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272676] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272681] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272687] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272692] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 6990.272698] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 6990.272703] cfg80211: Disabling freq 2484 MHz
[ 6990.272713] cfg80211: Regulatory domain changed to country: DK
[ 6990.272717] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6990.272723] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6990.272728] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6990.272733] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6990.272739] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 7001.184107] wlan0: no IPv6 routers present
[ 7103.212813] empathy-chat[798]: segfault at 0 ip b51b5eea sp bff3ae18 error 4 in libglib-2.0.so.0.3120.0[b517f000+f7000]
[ 7538.394778] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 7538.394791] cfg80211: Restoring regulatory settings
[ 7538.394799] cfg80211: Calling CRDA to update world regulatory domain
[ 7538.404755] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7538.404762] cfg80211: World regulatory domain updated:
[ 7538.404765] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7538.404770] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7538.404774] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7538.404778] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7538.404782] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7538.404785] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7538.465556] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 7544.640474] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 7550.835844] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 7554.238428] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7557.026807] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 7563.234209] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 7564.432813] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 7564.434476] wlan0: authenticated
[ 7564.434829] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 7564.440780] wlan0: RX ReassocResp from 06:0b:0a:fa:55:39 (capab=0x411 status=0 aid=32)
[ 7564.440788] wlan0: associated
[ 7564.445158] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7564.445285] cfg80211: Calling CRDA for country: DK
[ 7564.456493] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456502] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456506] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456512] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456517] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456523] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456527] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456532] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456536] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456542] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456546] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456552] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456556] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456563] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456567] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456573] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456577] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456583] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456587] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456592] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456597] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456602] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456607] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456613] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456618] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 7564.456624] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7564.456629] cfg80211: Disabling freq 2484 MHz
[ 7564.456639] cfg80211: Regulatory domain changed to country: DK
[ 7564.456643] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7564.456649] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7564.456654] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7564.456659] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7564.456665] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 7575.373736] wlan0: no IPv6 routers present
[ 7698.758895] type=1400 audit(1331821224.471:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=7893 comm="apparmor_parser"
[ 7698.759635] type=1400 audit(1331821224.475:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=7893 comm="apparmor_parser"
[ 7698.864631] type=1400 audit(1331821224.579:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=7933 comm="apparmor_parser"
[ 7698.865511] type=1400 audit(1331821224.579:27): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=7933 comm="apparmor_parser"
[ 7715.936827] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 7715.941175] SGI XFS Quota Management subsystem
[ 7715.960004] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7716.032218] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 7716.091728] QNX4 filesystem 0.2.3 registered.
[ 7716.178667] Btrfs loaded
[ 7737.458643] init: modemmanager main process (9351) terminated with status 255
[ 7737.458727] init: modemmanager main process ended, respawning
[ 7737.478760] init: modemmanager main process (9354) terminated with status 255
[ 7737.478821] init: modemmanager main process ended, respawning
[ 7737.497492] init: modemmanager main process (9356) terminated with status 255
[ 7737.497538] init: modemmanager main process ended, respawning
[ 7737.514351] init: modemmanager main process (9358) terminated with status 255
[ 7737.514413] init: modemmanager main process ended, respawning
[ 7737.528418] init: modemmanager main process (9360) terminated with status 255
[ 7737.528485] init: modemmanager main process ended, respawning
[ 7737.542035] init: modemmanager main process (9362) terminated with status 255
[ 7737.542102] init: modemmanager main process ended, respawning
[ 7737.556984] init: modemmanager main process (9364) terminated with status 255
[ 7737.557043] init: modemmanager main process ended, respawning
[ 7737.571235] init: modemmanager main process (9366) terminated with status 255
[ 7737.571277] init: modemmanager main process ended, respawning
[ 7737.585480] init: modemmanager main process (9368) terminated with status 255
[ 7737.585547] init: modemmanager main process ended, respawning
[ 7737.600416] init: modemmanager main process (9370) terminated with status 255
[ 7737.600471] init: modemmanager main process ended, respawning
[ 7737.613320] init: modemmanager main process (9372) terminated with status 255
[ 7737.613375] init: modemmanager respawning too fast, stopped
[ 8519.194458] wlan0: deauthenticating from 06:0b:0a:fa:55:39 by local choice (reason=3)
[ 8519.298101] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 8519.298112] cfg80211: Restoring regulatory settings
[ 8519.298139] cfg80211: Calling CRDA to update world regulatory domain
[ 8519.314126] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8519.314135] cfg80211: World regulatory domain updated:
[ 8519.314139] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8519.314150] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8519.314155] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8519.314161] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8519.314166] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8519.314172] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8522.197807] PM: Syncing filesystems ... done.
[ 8522.383157] PM: Preparing system for mem sleep
[ 8523.754045] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8523.769960] Freezing remaining freezable tasks ... (elapsed 0.06 seconds) done.
[ 8523.833917] PM: Entering mem sleep
[ 8523.833999] Suspending console(s) (use no_console_suspend to debug)
[ 8523.996912] PM: suspend of drv:psmouse dev:serio5 complete after 162.685 msecs
[ 8523.997227] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8523.998298] sd 0:0:0:0: [sda] Stopping disk
[ 8524.101889] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 8524.101894] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 8524.158417] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 8524.173895] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.224 msecs
[ 8524.422132] PM: suspend of drv:sd dev:0:0:0:0 complete after 424.874 msecs
[ 8524.422238] PM: suspend of drv:scsi dev:target0:0:0 complete after 424.930 msecs
[ 8524.422268] PM: suspend of drv:scsi dev:host0 complete after 366.778 msecs
[ 8524.437910] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 382.332 msecs
[ 8524.438016] PM: suspend of drv: dev:pci0000:00 complete after 382.089 msecs
[ 8524.438029] PM: suspend of devices complete after 603.788 msecs
[ 8524.438034] PM: suspend devices took 0.604 seconds
[ 8524.438564] r8169 0000:09:00.0: PME# enabled
[ 8524.438661] r8169 0000:09:00.0: wake-up capability enabled by ACPI
[ 8524.470231] ehci_hcd 0000:00:1d.0: PME# enabled
[ 8524.470294] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 8524.486262] ehci_hcd 0000:00:1a.0: PME# enabled
[ 8524.486320] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 8524.517963] PM: late suspend of devices complete after 79.911 msecs
[ 8524.518208] ACPI: Preparing to enter system sleep state S3
[ 8524.698028] PM: Saving platform NVS memory
[ 8524.699525] Disabling non-boot CPUs ...
[ 8524.702519] CPU 1 is now offline
[ 8524.805993] CPU 2 is now offline
[ 8524.807837] Broke affinity for irq 23
[ 8524.909928] CPU 3 is now offline
[ 8524.910592] Extended CMOS year: 2000
[ 8524.910885] ACPI: Low-level resume complete
[ 8524.910954] PM: Restoring platform NVS memory
[ 8524.911450] CPU0: Thermal monitoring enabled (TM1)
[ 8524.911514] Extended CMOS year: 2000
[ 8524.911584] Enabling non-boot CPUs ...
[ 8524.911771] Booting Node 0 Processor 1 APIC 0x4
[ 8524.911773] smpboot cpu 1: start_ip = 98000
[ 8524.922050] Initializing CPU#1
[ 8524.922820] Calibrating delay loop (skipped) already calibrated this CPU
[ 8524.922853] CPU1: Thermal monitoring handled by SMI
[ 8524.943307] NMI watchdog enabled, takes one hw-pmu counter.
[ 8524.943742] CPU1 is up
[ 8524.943855] Booting Node 0 Processor 2 APIC 0x1
[ 8524.943858] smpboot cpu 2: start_ip = 98000
[ 8524.954052] Initializing CPU#2
[ 8524.954892] Calibrating delay loop (skipped) already calibrated this CPU
[ 8524.954928] CPU2: Thermal monitoring handled by SMI
[ 8524.975550] NMI watchdog enabled, takes one hw-pmu counter.
[ 8524.976005] CPU2 is up
[ 8524.976122] Booting Node 0 Processor 3 APIC 0x5
[ 8524.976125] smpboot cpu 3: start_ip = 98000
[ 8524.986319] Initializing CPU#3
[ 8524.987157] Calibrating delay loop (skipped) already calibrated this CPU
[ 8524.987190] CPU3: Thermal monitoring handled by SMI
[ 8525.008008] NMI watchdog enabled, takes one hw-pmu counter.
[ 8525.008639] CPU3 is up
[ 8525.012771] ACPI: Waking up from system sleep state S3
[ 8525.163095] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8525.163106] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x1801)
[ 8525.163112] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
[ 8525.163118] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0000004)
[ 8525.163125] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407)
[ 8525.163226] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8525.163253] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0706000)
[ 8525.163265] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 8525.163330] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 8525.163338] ehci_hcd 0000:00:1a.0: PME# disabled
[ 8525.163367] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 8525.163395] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0700004)
[ 8525.163403] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8525.163412] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
[ 8525.163463] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
[ 8525.163481] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xc0e1c0d1)
[ 8525.163488] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xc0c0c0b0)
[ 8525.163495] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[ 8525.163503] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x10107, writing 0x20200)
[ 8525.163514] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8525.163524] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.163582] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 8525.163599] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc0a1c091)
[ 8525.163606] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
[ 8525.163614] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[ 8525.163627] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8525.163637] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.163694] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[ 8525.163711] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xc081c071)
[ 8525.163719] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xc060c050)
[ 8525.163726] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 8525.163740] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8525.163750] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.163807] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x4020a)
[ 8525.163825] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xf081f081)
[ 8525.163833] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xc040c000)
[ 8525.163840] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[ 8525.163853] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 8525.163863] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.163915] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 8525.163943] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0707000)
[ 8525.163955] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 8525.164010] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 8525.164018] ehci_hcd 0000:00:1d.0: PME# disabled
[ 8525.164034] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[ 8525.164052] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 8525.164059] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 8525.164066] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 8525.164083] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.164174] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 8525.164207] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 8525.164308] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 8525.164405] rtl8192ce 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 8525.164436] rtl8192ce 0000:03:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf0400004)
[ 8525.164447] rtl8192ce 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
[ 8525.164456] rtl8192ce 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8525.164468] rtl8192ce 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 8525.164619] r8169 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 8525.164673] r8169 0000:09:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf080000c)
[ 8525.164697] r8169 0000:09:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf080400c)
[ 8525.164722] r8169 0000:09:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001)
[ 8525.164739] r8169 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 8525.164763] r8169 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 8525.165154] PM: early resume of devices complete after 2.136 msecs
[ 8525.165297] i915 0000:00:02.0: setting latency timer to 64
[ 8525.165469] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8525.165484] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8525.165524] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 8525.165530] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8525.165544] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8525.165581] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8525.165596] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8525.165628] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8525.165642] pci 0000:00:1e.0: setting latency timer to 64
[ 8525.165670] ahci 0000:00:1f.2: setting latency timer to 64
[ 8525.165675] rtlwifi: wireless switch is on
[ 8525.165749] r8169 0000:09:00.0: wake-up capability disabled by ACPI
[ 8525.165771] r8169 0000:09:00.0: PME# disabled
[ 8525.165853] sd 0:0:0:0: [sda] Starting disk
[ 8525.342931] PM: resume of drv:hub dev:1-1:1.0 complete after 177.033 msecs
[ 8525.342938] PM: resume of drv:hub dev:2-1:1.0 complete after 176.920 msecs
[ 8525.342947] PM: resume of drv: dev:ep_00 complete after 176.982 msecs
[ 8525.342956] PM: resume of drv: dev:ep_81 complete after 177.021 msecs
[ 8525.342961] PM: resume of drv: dev:ep_81 complete after 176.824 msecs
[ 8525.342980] PM: resume of drv: dev:ep_00 complete after 176.699 msecs
[ 8525.367704] PM: resume of drv:ac dev:ACPI0003:00 complete after 202.269 msecs
[ 8525.415004] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 8525.476858] Extended CMOS year: 2000
[ 8525.494938] ata5: SATA link down (SStatus 0 SControl 300)
[ 8525.516571] PM: resume of drv:uvcvideo dev:2-1.4:1.0 complete after 350.206 msecs
[ 8525.516587] PM: resume of drv: dev:ep_00 complete after 350.121 msecs
[ 8525.516593] PM: resume of drv:uvcvideo dev:2-1.4:1.1 complete after 350.151 msecs
[ 8525.516602] PM: resume of drv: dev:ep_81 complete after 350.215 msecs
[ 8525.728910] PM: resume of drv:i915 dev:0000:00:02.0 complete after 563.570 msecs
[ 8527.387111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8527.388218] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8527.388225] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8527.393305] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8527.393312] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8527.393859] ata1.00: configured for UDMA/100
[ 8527.424397] PM: resume of drv:sd dev:0:0:0:0 complete after 2258.347 msecs
[ 8527.424464] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2258.409 msecs
[ 8527.424473] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1947.383 msecs
[ 8527.427113] PM: resume of devices complete after 2261.662 msecs
[ 8527.427233] PM: resume devices took 2.264 seconds
[ 8527.427281] PM: Finishing wakeup.
[ 8527.427284] Restarting tasks ... done.
[ 8527.517918] video LNXVIDEO:01: Restoring backlight state
[ 8528.808642] r8169 0000:09:00.0: PME# enabled
[ 8528.899353] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8529.345408] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8529.363749] r8169 0000:09:00.0: PME# disabled
[ 8529.412826] r8169 0000:09:00.0: eth0: link down
[ 8529.413613] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8529.525043] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8550.083390] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8558.222553] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8559.422980] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 8559.621973] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 2)
[ 8559.822015] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 3)
[ 8560.022005] wlan0: authentication with 06:0b:0a:fa:55:39 timed out
[ 8565.061503] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8566.265059] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 8566.462606] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 2)
[ 8566.662583] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 3)
[ 8566.862620] wlan0: authentication with 06:0b:0a:fa:55:39 timed out
[ 8571.892131] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8573.094446] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 8573.291223] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 2)
[ 8573.491203] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 3)
[ 8573.691298] wlan0: authentication with 06:0b:0a:fa:55:39 timed out
[ 8578.698862] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8579.898220] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 8579.903629] wlan0: authenticated
[ 8579.908033] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 8580.107821] wlan0: associate with 06:0b:0a:fa:55:39 (try 2)
[ 8580.307853] wlan0: associate with 06:0b:0a:fa:55:39 (try 3)
[ 8580.507846] wlan0: association with 06:0b:0a:fa:55:39 timed out
[ 8585.603369] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8588.572772] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd
[ 8593.491469] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8593.831869] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8598.367818] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 8599.568007] wlan0: authenticate with 06:0b:0a:fa:55:39 (try 1)
[ 8599.581168] wlan0: authenticated
[ 8599.595659] wlan0: associate with 06:0b:0a:fa:55:39 (try 1)
[ 8599.599221] wlan0: RX AssocResp from 06:0b:0a:fa:55:39 (capab=0x11 status=0 aid=84)
[ 8599.599228] wlan0: associated
[ 8599.599989] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8599.600120] cfg80211: Calling CRDA for country: DK
[ 8599.614806] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614815] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614821] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614828] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614834] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614841] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614845] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614851] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614856] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614863] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614867] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614874] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614879] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614886] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614891] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614897] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614902] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614909] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614914] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614920] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614925] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614932] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614937] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614943] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614948] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 8599.614954] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8599.614959] cfg80211: Disabling freq 2484 MHz
[ 8599.614969] cfg80211: Regulatory domain changed to country: DK
[ 8599.614973] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8599.614979] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8599.614985] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8599.614990] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8599.614995] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 8610.602533] wlan0: no IPv6 routers present