USB_ModeSwitch log from Sun Nov 27 13:03:16 2011

Using global config file: /etc/usb_modeswitch.conf

Raw args from udev: /4-2:1.0

Bus ID for device not given by udev.
 Trying to determine it from kernel name (4-2:1.0) ...

USB dir exists: /sys/bus/usb/devices/4-2
Warning: USB attribute "serial" not readable.

SCSI dir exists: /sys/bus/usb/devices/4-2
Warning: SCSI attribute "vendor" not readable.
Warning: SCSI attribute "model" not readable.
Warning: SCSI attribute "rev" not readable.
----------------
USB values from sysfs:
  idVendor	12d1
  idProduct	1003
  manufacturer	HUAWEI Technologies
  product	HUAWEI Mobile
  serial	(null)
  bNumConfigurations	1
----------------
bNumConfigurations is 1 - don't check for active configuration
Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz
Searching entries named: /usr/share/usb_modeswitch/12d1:1003*
Searching overriding entries named: /etc/usb_modeswitch.d/12d1:1003*
SCSI attributes not needed, moving on.

Extracting config 12d1:1003 from collection /usr/share/usb_modeswitch/configPack.tar.gz
! matched, now switching
 (running command: /usr/sbin/usb_modeswitch -I -W -D -c /var/lib/usb_modeswitch/current_cfg -u -1 2>&1)

Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are expected in the process)
--------------------------------

Reading config file: /var/lib/usb_modeswitch/current_cfg

 * usb_modeswitch: handle USB devices with multiple modes
 * Version 1.1.9 (C) Josua Dietze 2011
 * Based on libusb0 (0.1.12 and above)

 ! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=  0x12d1
DefaultProduct= 0x1003
TargetVendor=   not set
TargetProduct=  not set
TargetClass=    0xff
TargetProductList=""

DetachStorageOnly=0
HuaweiMode=1
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint=  not set
MessageContent=""
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled


Looking for target devices ...
 No devices in target mode or class found
Looking for default devices ...
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 04f2:b044
  searching devices, found USB ID 1d6b:0002
  searching devices, found USB ID 1d6b:0002
 No devices in default mode found. Nothing to do. Bye.

--------------------------------
(end of usb_modeswitch output)

USB dir exists: /sys/bus/usb/devices/4-2
Warning: USB attribute "serial" not readable.

All done, exiting