| 2007-04-26 22:14:10 |
PerToft |
bug |
|
|
added bug |
| 2007-04-26 22:14:38 |
PerToft |
bug |
|
|
added attachment 'lspci' (lspci) |
| 2007-04-26 22:15:04 |
PerToft |
bug |
|
|
added attachment 'dmesg' (dmesg) |
| 2007-04-26 22:20:11 |
PerToft |
bug |
|
|
added attachment 'dmesg-after-modprobe' (dmesg-after-modprobe) |
| 2007-04-26 22:23:39 |
PerToft |
description |
Binary package hint: linux-source-2.6.20
Ubuntu wont install/boot unless it gets irqpoll pci=noacpi options at boot.
Hardware:
HP Pavilion tx1040ea
AMD Turion X2 1,6
nForce chipset
The problem for the wireless card and the graphics card is the IRQ routning.
e.g. Interrupt: pin A routed to IRQ 0
03:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 1361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: e4 14 12 43 07 00 10 00 01 00 80 02 10 00 00 00
10: 00 00 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 61 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 |
Binary package hint: linux-source-2.6.20
Hardware:
HP Pavilion tx1040ea
AMD Turion X2 1,6
Ubuntu wont install/boot unless it gets irqpoll pci=noacpi options at boot.
If no extra options the kernel freezes at after theese lines:
dmesg:
...
[ 0.000001] CPU#0 had -156 usecs TSC skew, fixed it up.
[ 0.000004] CPU#1 had 156 usecs TSC skew, fixed it up.
if i only use pci=noacpi the system can boot and i can login at gdm but the xorg hangs when gnome startes (before the splash screen).
I can see that it is the hald which hangs due to irq problems.
The problem for the wireless card and the graphics card is the IRQ routning.
e.g. Interrupt: pin A routed to IRQ 0
03:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 1361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: e4 14 12 43 07 00 10 00 01 00 80 02 10 00 00 00
10: 00 00 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 61 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 |
|
| 2007-05-09 11:51:39 |
PerToft |
title |
ACPI IRQ problem - no network or graphics etc. |
ACPI IRQ problem - System hangs and no network or graphics etc. |
|
| 2007-05-16 14:01:39 |
PerToft |
bug |
|
|
assigned to linux-source-2.6.20 (Debian) |
| 2007-05-16 14:01:53 |
PerToft |
bug |
|
|
assigned to linux-source-2.6.20 (Fedora) |
| 2007-05-16 14:02:26 |
PerToft |
bug |
|
|
assigned to linux-source-2.6.20 (Suse) |
| 2007-05-16 14:03:05 |
PerToft |
description |
Binary package hint: linux-source-2.6.20
Hardware:
HP Pavilion tx1040ea
AMD Turion X2 1,6
Ubuntu wont install/boot unless it gets irqpoll pci=noacpi options at boot.
If no extra options the kernel freezes at after theese lines:
dmesg:
...
[ 0.000001] CPU#0 had -156 usecs TSC skew, fixed it up.
[ 0.000004] CPU#1 had 156 usecs TSC skew, fixed it up.
if i only use pci=noacpi the system can boot and i can login at gdm but the xorg hangs when gnome startes (before the splash screen).
I can see that it is the hald which hangs due to irq problems.
The problem for the wireless card and the graphics card is the IRQ routning.
e.g. Interrupt: pin A routed to IRQ 0
03:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 1361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: e4 14 12 43 07 00 10 00 01 00 80 02 10 00 00 00
10: 00 00 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 61 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 |
Binary package hint: linux-source-2.6.20, linux-source-2.6.21
Hardware:
HP Pavilion tx1040ea
AMD Turion X2 1,6
Ubuntu wont install/boot unless it gets irqpoll pci=noacpi options at boot.
If no extra options the kernel freezes at after theese lines:
dmesg:
...
[ 0.000001] CPU#0 had -156 usecs TSC skew, fixed it up.
[ 0.000004] CPU#1 had 156 usecs TSC skew, fixed it up.
if i only use pci=noacpi the system can boot and i can login at gdm but the xorg hangs when gnome startes (before the splash screen).
I can see that it is the hald which hangs due to irq problems.
The problem for the wireless card and the graphics card is the IRQ routning.
e.g. Interrupt: pin A routed to IRQ 0
03:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 1361
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: e4 14 12 43 07 00 10 00 01 00 80 02 10 00 00 00
10: 00 00 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 61 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00 |
|
| 2007-05-16 14:04:32 |
PerToft |
title |
ACPI IRQ problem - System hangs and no network or graphics etc. |
HP Pavilion Laptop - System freezes due to IRQ interrupt problems |
|
| 2008-10-08 04:02:39 |
Daniel T Chen |
bug |
|
|
assigned to linux (Ubuntu) |
| 2008-10-08 04:02:56 |
Daniel T Chen |
linux: status |
New |
Incomplete |
|
| 2008-10-08 04:02:56 |
Daniel T Chen |
linux: statusexplanation |
|
Is this symptom still reproducible in 8.10 beta? |
|
| 2008-10-21 02:02:39 |
Leann Ogasawara |
linux-source-2.6.20: status |
New |
Won't Fix |
|
| 2008-10-21 02:02:39 |
Leann Ogasawara |
linux-source-2.6.20: statusexplanation |
|
The 18 month support period for Feisty Fawn 6.10 has reached it's end of life - http://www.ubuntu.com/news/ubuntu-7.04-end-of-life . As a result, we are closing the linux-source-2.6.20 kernel task. However, this will remain open against the actively developed kernel. If someone could confirm this with the 2.6.27 Intrepid Ibex kernel that would be great. Thanks. |
|
| 2009-05-12 20:49:00 |
Steve Conklin |
linux (Ubuntu): status |
Incomplete |
Won't Fix |
|
| 2010-09-15 12:16:15 |
rusivi2 |
linux-source-2.6.20 (Debian): status |
New |
Incomplete |
|
| 2010-09-15 12:16:58 |
rusivi2 |
linux-source-2.6.20 (Fedora): status |
New |
Incomplete |
|
| 2010-09-15 12:17:33 |
rusivi2 |
linux-source-2.6.20 (Suse): status |
New |
Incomplete |
|
