The same problem exists on HP blade server, maybe on MOST of HP servers... HP PC like dc7800/dc7600 and NB like Compaq 6910p don't have this problem. The following is working OLD rtc driver dmesg on HP DL380G4 with Fedora 8 installed, is it helpful? Initializing cgroup subsys cpuset Linux version 2.6.25.6-27.fc8 (mockbuild@x86-2) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Jun 13 16:17:54 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable) BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data) BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000019bfff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917491) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1687551) 2 entries of 3200 used end_pfn_map = 1687551 DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT DFFF3300, 0044 (r1 HP P51 2 Ò 162E) ACPI: FACP DFFF3380, 00F4 (r3 HP P51 2 Ò 162E) ACPI: DSDT DFFF3480, 2D62 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS DFFF3100, 0040 ACPI: SPCR DFFF3140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG DFFF31C0, 003C (r1 HP ProLiant 1 0) ACPI: APIC DFFF3200, 00C2 (r1 HP 00000083 2 0) No NUMA configuration found Faking a node at 0000000000000000-000000019bfff000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917491) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1687551) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-000000019bfff000 NODE_DATA [0000000000010000 - 0000000000017fff] bootmap [0000000000018000 - 000000000004b7ff] pages 34 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-757aeb] TEXT DATA BSS early res: 3 [37c17000-37fefc61] RAMDISK early res: 4 [9f400-a03ff] EBDA early res: 5 [8000-ffff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007600000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007a00000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007e00000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008200000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810008600000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008a00000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008e00000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009200000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810009600000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009a00000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009e00000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff81000a200000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff81000a600000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000aa00000 on node 0 [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000ae00000 on node 0 [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000b200000 on node 0 [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000b600000 on node 0 [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000ba00000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1687551 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 917491 0: 1048576 -> 1687551 On node 0 totalpages: 1556369 DMA zone: 56 pages used for memmap DMA zone: 1381 pages reserved DMA zone: 2562 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 899115 pages, LIFO batch:31 Normal zone: 8735 pages used for memmap Normal zone: 630240 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72]) IOAPIC[3]: apic_id 11, address 0xfec84000, GSI 72-95 ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96]) IOAPIC[4]: apic_id 12, address 0xfec84400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000dfff3000 - 00000000dfffb000 PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 43072 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 1531917 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 3200.109 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xbc33000 - 0xfc33000 Memory: 6061120k/6750204k available (2633k kernel code, 164356k reserved, 1412k data, 344k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 Calibrating delay using timer specific routine.. 6403.59 BogoMIPS (lpj=3201798) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12500412 Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6400.16 BogoMIPS (lpj=3200082) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6400.12 BogoMIPS (lpj=3200061) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6400.18 BogoMIPS (lpj=3200092) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=6224 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU1 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000002 00000000,00000008 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU3 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000008 00000000,00000002 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f net_namespace: 1016 bytes Time: 2:50:25 Date: 06/27/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0800-083f claimed by ICH4 GPIO pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 PCI: Cannot allocate resource region 4 of device 0000:00:1d.1 PCI: Cannot allocate resource region 4 of device 0000:00:1d.2 PCI: Cannot allocate resource region 4 of device 0000:00:1d.3 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x71f has been reserved system 00:01: ioport range 0x800-0x83f has been reserved system 00:01: ioport range 0x900-0x97f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xfde00000-0xfdefffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:00:02.0 IO window: 4000-4fff MEM window: 0xfde00000-0xfdffffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-3fff MEM window: 0xfbf00000-0xfcffffff PREFETCH window: 0x00000000f0100000-0x00000000f01fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:05:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3939k freed audit: initializing netlink socket (disabled) type=2000 audit(1214535024.741:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 77E2A7645533EBBA - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:06 is registered as cooling_device2 ACPI: ACPI0007:07 is registered as cooling_device3 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 12:26:815 Freeing unused kernel memory: 344k freed Write protecting the kernel read-only data: 1128k ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbef0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.6-27.fc8 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: