Although I'm not sure, I think the problem is that the HP servers are not exporting the RTC via PNP. From ./drivers/rtc/rtc-cmos.c: static const struct pnp_device_id rtc_ids[] = { { .id = "PNP0b00", }, { .id = "PNP0b01", }, { .id = "PNP0b02", }, { }, }; # cat /sys/devices/pnp0/*/id PNP0a03 PNP0c02 IPI0001 PNP0103 PNP0200 PNP0800 PNP0303 PNP0f13 PNP0f0e PNP0a06 PNP0501 PNP0500 dmesg storage1:~ # dmesg Initializing cgroup subsys cpuset Linux version 2.6.25.14-108.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 13:46:35 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable) BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data) BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable) BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000022ffff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851542) 1 entries of 3200 used Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2293759) 3 entries of 3200 used end_pfn_map = 2293759 DMI 2.4 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT CFE567C0, 0074 (r1 HP ProLiant 2 Ò 162E) ACPI: FACP CFE56840, 00F4 (r3 HP ProLiant 2 Ò 162E) ACPI: DSDT CFE56940, 1FB8 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS CFE56100, 0040 ACPI: SPCR CFE56140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG CFE561C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET CFE56200, 0038 (r1 HP ProLiant 2 Ò 162E) ACPI: SPMI CFE56240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: ERST CFE56280, 01D0 (r1 HP ProLiant 1 Ò 162E) ACPI: APIC CFE56480, 009E (r1 HP ProLiant 2 0) ACPI: FFFF CFE56540, 0176 (r1 HP ProLiant 1 Ò 162E) ACPI: BERT CFE566C0, 0030 (r1 HP ProLiant 1 Ò 162E) ACPI: HEST CFE56700, 00BC (r1 HP ProLiant 1 Ò 162E) No NUMA configuration found Faking a node at 0000000000000000-000000022ffff000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851542) 1 entries of 3200 used Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2293759) 3 entries of 3200 used Bootmem setup node 0 0000000000000000-000000022ffff000 NODE_DATA [0000000000012000 - 0000000000019fff] bootmap [000000000001a000 - 000000000005ffff] pages 46 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-75223b] TEXT DATA BSS early res: 3 [37c91000-37fefcad] RAMDISK early res: 4 [9f400-a03ff] EBDA early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008600000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008a00000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008e00000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009200000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009600000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009a00000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009e00000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000a200000 on node 0 [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000a600000 on node 0 [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000aa00000 on node 0 [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000ae00000 on node 0 [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000b200000 on node 0 [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000b600000 on node 0 [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000ba00000 on node 0 [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000be00000 on node 0 [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000c200000 on node 0 [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000c600000 on node 0 [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000ca00000 on node 0 [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000ce00000 on node 0 [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000d200000 on node 0 [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000d600000 on node 0 [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000da00000 on node 0 [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000de00000 on node 0 [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000e200000 on node 0 [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000e600000 on node 0 [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000ea00000 on node 0 [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000ee00000 on node 0 [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000f200000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293759 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 851542 0: 851550 -> 851551 0: 1048576 -> 2293759 On node 0 totalpages: 2096629 DMA zone: 56 pages used for memmap DMA zone: 1378 pages reserved DMA zone: 2565 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833167 pages, LIFO batch:31 Normal zone: 17023 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe56000 - 00000000cfe5e000 PM: Registered nosave memory: 00000000cfe5f000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 42688 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063892 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 3000.093 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xf433000 - 0x13433000 Memory: 8193932k/9175036k available (2629k kernel code, 192584k reserved, 1382k data, 352k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 6003.63 BogoMIPS (lpj=3001815) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 20833956 Detected 20.833 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.03 BogoMIPS (lpj=3000016) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.02 BogoMIPS (lpj=3000013) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.04 BogoMIPS (lpj=3000021) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=6224 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU1 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000002 00000000,00000008 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU3 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000008 00000000,00000002 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f net_namespace: 1016 bytes Time: 17:00:26 Date: 08/14/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x71f has been reserved system 00:01: ioport range 0x800-0x83f has been reserved system 00:01: ioport range 0x900-0x97f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved PCI: Bridge: 0000:0a:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: 0xfdf00000-0xfdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 4000-4fff MEM window: 0xfdd00000-0xfdefffff PREFETCH window: 0x00000000d1000000-0x00000000d10fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: 0xf7e00000-0xf7ffffff PREFETCH window: 0x00000000d8000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.0 to 64 ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0a:00.0 to 64 ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0a:01.0 to 64 ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:0a:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.3 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs...<7>Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3451k freed audit: initializing netlink socket (disabled) type=2000 audit(1218733225.621:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:03.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:09:00.0 to 64 Allocate Port Service[0000:09:00.0:pcie11] PCI: Setting latency timer of device 0000:0a:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:00.0:pcie21] PCI: Setting latency timer of device 0000:0a:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:01.0:pcie21] PCI: Setting latency timer of device 0000:0a:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:02.0:pcie21] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:06 is registered as cooling_device2 ACPI: ACPI0007:07 is registered as cooling_device3 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:827:36 Freeing unused kernel memory: 352k freed Write protecting the kernel read-only data: 1112k ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:01:04.4 SCSI subsystem initialized HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 cciss: MSI-X init failed -22 cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 16 using DAC blocks= 716544402 block_size= 512 heads=255, sectors=32, cylinders=87812 blocks= 716544402 block_size= 512 heads=255, sectors=32, cylinders=87812 cciss/c0d0: p1 p2 p3 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: