[ 0.000000] BIOS EBDA/lowmem at: 0009e000/0009e000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable) [ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved) [ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c86000 (usable) [ 0.000000] BIOS-e820: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cec000 (usable) [ 0.000000] BIOS-e820: 00000000b7cec000 - 00000000b7cff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable) [ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000091000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b7b6c000 (usable) [ 0.000000] modified: 00000000b7b6c000 - 00000000b7bbf000 (reserved) [ 0.000000] modified: 00000000b7bbf000 - 00000000b7c86000 (usable) [ 0.000000] modified: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS) [ 0.000000] modified: 00000000b7cbf000 - 00000000b7cec000 (usable) [ 0.000000] modified: 00000000b7cec000 - 00000000b7cff000 (ACPI data) [ 0.000000] modified: 00000000b7cff000 - 00000000b7d00000 (usable) [ 0.000000] modified: 00000000b7d00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378bd000 - 37fef6c0 [ 0.000000] Allocated new RAMDISK: 00881000 - 00fb36c0 [ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fef6bf to 00881000 - 00fb36bf [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV) [ 0.000000] ACPI: XSDT B7CFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) [ 0.000000] ACPI: FACP B7CFD000, 00F4 (r4 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: DSDT B7CEF000, 902C (r1 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: FACS B7C93000, 0040 [ 0.000000] ACPI: HPET B7CFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: APIC B7CFB000, 006C (r2 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: MCFG B7CFA000, 003C (r1 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: ASF! B7CF9000, 00A5 (r32 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: SLIC B7CEE000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: BOOT B7CED000, 0028 (r1 TOSINV TOSINV00 1 MSFT 1000013) [ 0.000000] ACPI: SSDT B7CEC000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2057MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fb36c0] NEW RAMDISK ==> [0000881000 - 0000fb36c0] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000b7d00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000091 [ 0.000000] 0: 0x00000100 -> 0x000b7b6c [ 0.000000] 0: 0x000b7bbf -> 0x000b7c86 [ 0.000000] 0: 0x000b7cbf -> 0x000b7cec [ 0.000000] 0: 0x000b7cff -> 0x000b7d00 [ 0.000000] On node 0 totalpages: 752613 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3940 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4115 pages used for memmap [ 0.000000] HighMem zone: 522320 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 746730 [ 0.000000] Kernel command line: root=UUID=fbffce58-a605-409a-92a0-0872bc353077 ro quiet vga=791 acpi.power_nocheck=1 thermal.psv=52 thermal.act=42 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.273 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 15057920 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2955224k/3011584k available (4126k kernel code, 54388k reserved, 2208k data, 532k init, 2105740k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.54 BogoMIPS (lpj=7981092) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018501] ACPI: Core revision 20080926 [ 0.021648] ACPI: Checking initramfs for custom DSDT [ 0.324430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.365080] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.368001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3990.40 BogoMIPS (lpj=7980808) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.452609] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.452625] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.456033] Brought up 2 CPUs [ 0.456036] Total of 2 processors activated (7980.95 BogoMIPS). [ 0.456088] CPU0 attaching sched-domain: [ 0.456090] domain 0: span 0-1 level MC [ 0.456093] groups: 0 1 [ 0.456098] CPU1 attaching sched-domain: [ 0.456100] domain 0: span 0-1 level MC [ 0.456102] groups: 1 0 [ 0.456167] net_namespace: 776 bytes [ 0.456167] Booting paravirtualized kernel on bare hardware [ 0.456307] Time: 21:12:01 Date: 07/09/09 [ 0.456307] regulator: core version 0.5 [ 0.456307] NET: Registered protocol family 16 [ 0.456307] EISA bus registered [ 0.456307] ACPI: bus type pci registered [ 0.456307] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.456307] PCI: MCFG area at f8000000 reserved in E820 [ 0.456307] PCI: Using MMCONFIG for extended config space [ 0.456307] PCI: Using configuration type 1 for base access [ 0.457380] ACPI: EC: Look up EC in DSDT [ 0.463815] ACPI: BIOS _OSI(Linux) query ignored [ 0.464017] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.468029] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.968006] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.088557] ACPI: Interpreter enabled [ 1.088561] ACPI: (supports S0 S3 S4 S5) [ 1.088587] ACPI: Using IOAPIC for interrupt routing [ 1.100372] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 1.100375] ACPI: EC: driver started in poll mode [ 1.100563] ACPI: No dock devices found. [ 1.100574] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.100652] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff] [ 1.100659] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff] [ 1.100664] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117] [ 1.100695] pci 0000:00:02.1: reg 10 64bit mmio: [0xd3500000-0xd35fffff] [ 1.100828] pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff] [ 1.100923] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df] [ 1.101021] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6805c00-0xd6805fff] [ 1.101071] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.101076] pci 0000:00:1a.7: PME# disabled [ 1.101129] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6800000-0xd6803fff] [ 1.101166] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.101169] pci 0000:00:1b.0: PME# disabled [ 1.101233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.101237] pci 0000:00:1c.0: PME# disabled [ 1.101300] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.101304] pci 0000:00:1c.1: PME# disabled [ 1.101370] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.101374] pci 0000:00:1c.4: PME# disabled [ 1.101467] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 1.101579] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f] [ 1.101692] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f] [ 1.101805] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f] [ 1.101901] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6805800-0xd6805bff] [ 1.101951] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.101956] pci 0000:00:1d.7: PME# disabled [ 1.102155] pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f] [ 1.102162] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f] [ 1.102169] pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107] [ 1.102176] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b] [ 1.102183] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f] [ 1.102190] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6805000-0xd68057ff] [ 1.102208] pci 0000:00:1f.2: PME# supported from D3hot [ 1.102213] pci 0000:00:1f.2: PME# disabled [ 1.102249] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6806000-0xd68060ff] [ 1.102266] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] [ 1.102444] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff] [ 1.102519] pci 0000:02:00.0: reg 18 64bit mmio: [0xd0410000-0xd0410fff] [ 1.102571] pci 0000:02:00.0: reg 20 64bit mmio: [0xd0400000-0xd040ffff] [ 1.102633] pci 0000:02:00.0: unsupported PM cap regs version (7) [ 1.102761] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff] [ 1.102766] pci 0000:00:1c.0: bridge 32bit mmio: [0xd5800000-0xd67fffff] [ 1.102774] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd14fffff] [ 1.102857] pci 0000:03:00.0: reg 10 64bit mmio: [0xd4700000-0xd4701fff] [ 1.102927] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.102934] pci 0000:03:00.0: PME# disabled [ 1.103006] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] [ 1.103010] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4700000-0xd57fffff] [ 1.103017] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1500000-0xd24fffff] [ 1.103072] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff] [ 1.103076] pci 0000:00:1c.4: bridge 32bit mmio: [0xd3700000-0xd46fffff] [ 1.103083] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd2500000-0xd34fffff] [ 1.103134] pci 0000:04:06.0: reg 10 32bit mmio: [0xd3600000-0xd36007ff] [ 1.103184] pci 0000:04:06.0: supports D1 D2 [ 1.103186] pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103191] pci 0000:04:06.0: PME# disabled [ 1.103233] pci 0000:04:06.1: reg 10 32bit mmio: [0xd3600b00-0xd3600bff] [ 1.103282] pci 0000:04:06.1: supports D1 D2 [ 1.103284] pci 0000:04:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103288] pci 0000:04:06.1: PME# disabled [ 1.103330] pci 0000:04:06.2: reg 10 32bit mmio: [0xd3600a00-0xd3600aff] [ 1.103382] pci 0000:04:06.2: supports D1 D2 [ 1.103384] pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103388] pci 0000:04:06.2: PME# disabled [ 1.103430] pci 0000:04:06.3: reg 10 32bit mmio: [0xd3600900-0xd36009ff] [ 1.103479] pci 0000:04:06.3: supports D1 D2 [ 1.103481] pci 0000:04:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103486] pci 0000:04:06.3: PME# disabled [ 1.103528] pci 0000:04:06.4: reg 10 32bit mmio: [0xd3600800-0xd36008ff] [ 1.103578] pci 0000:04:06.4: supports D1 D2 [ 1.103579] pci 0000:04:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103584] pci 0000:04:06.4: PME# disabled [ 1.103637] pci 0000:00:1e.0: transparent bridge [ 1.103643] pci 0000:00:1e.0: bridge 32bit mmio: [0xd3600000-0xd36fffff] [ 1.103673] bus 00 -> node 0 [ 1.103685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.104188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 1.104388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 1.104580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 1.104780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 1.108984] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12) [ 1.109152] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 1.109318] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 1.109484] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 1.109650] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.109816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 1.109981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 1.110145] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 1.110290] ACPI: Power Resource [FN00] (on) [ 1.110440] ACPI: WMI: Mapper loaded [ 1.110467] SCSI subsystem initialized [ 1.110467] libata version 3.00 loaded. [ 1.110467] usbcore: registered new interface driver usbfs [ 1.110467] usbcore: registered new interface driver hub [ 1.110467] usbcore: registered new device driver usb [ 1.110467] PCI: Using ACPI for IRQ routing [ 1.112012] Bluetooth: Core ver 2.13 [ 1.112017] NET: Registered protocol family 31 [ 1.112017] Bluetooth: HCI device and connection manager initialized [ 1.112017] Bluetooth: HCI socket layer initialized [ 1.112017] NET: Registered protocol family 8 [ 1.112018] NET: Registered protocol family 20 [ 1.112028] NetLabel: Initializing [ 1.112030] NetLabel: domain hash size = 128 [ 1.112032] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.112043] NetLabel: unlabeled traffic allowed by default [ 1.112056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.112061] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.116064] AppArmor: AppArmor Filesystem Enabled [ 1.120010] Switched to high resolution mode on CPU 0 [ 1.120658] Switched to high resolution mode on CPU 1 [ 1.120667] pnp: PnP ACPI init [ 1.120674] ACPI: bus type pnp registered [ 1.122374] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling [ 1.123216] pnp: PnP ACPI: found 8 devices [ 1.123218] ACPI: ACPI bus type pnp unregistered [ 1.123220] PnPBIOS: Disabled by ACPI PNP [ 1.123230] system 00:01: ioport range 0x800-0x80f has been reserved [ 1.123232] system 00:01: ioport range 0x810-0x817 has been reserved [ 1.123235] system 00:01: ioport range 0x820-0x823 has been reserved [ 1.123237] system 00:01: ioport range 0x400-0x47f has been reserved [ 1.123239] system 00:01: ioport range 0x500-0x57f has been reserved [ 1.123243] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 1.123245] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.123248] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved [ 1.123251] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.123253] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.123256] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved [ 1.123258] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 1.123261] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.123264] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved [ 1.157952] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.157955] pci 0000:00:1c.0: IO window: 0x3000-0x4fff [ 1.157961] pci 0000:00:1c.0: MEM window: 0xd5800000-0xd67fffff [ 1.157966] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d14fffff [ 1.157973] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 1.157977] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 1.157983] pci 0000:00:1c.1: MEM window: 0xd4700000-0xd57fffff [ 1.157987] pci 0000:00:1c.1: PREFETCH window: 0x000000d1500000-0x000000d24fffff [ 1.157995] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 1.157998] pci 0000:00:1c.4: IO window: 0x1000-0x1fff [ 1.158004] pci 0000:00:1c.4: MEM window: 0xd3700000-0xd46fffff [ 1.158008] pci 0000:00:1c.4: PREFETCH window: 0x000000d2500000-0x000000d34fffff [ 1.158016] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 1.158018] pci 0000:00:1e.0: IO window: disabled [ 1.158024] pci 0000:00:1e.0: MEM window: 0xd3600000-0xd36fffff [ 1.158028] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.158044] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.158049] pci 0000:00:1c.0: setting latency timer to 64 [ 1.158058] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.158063] pci 0000:00:1c.1: setting latency timer to 64 [ 1.158071] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 1.158075] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.158081] pci 0000:00:1c.4: setting latency timer to 64 [ 1.158088] pci 0000:00:1e.0: setting latency timer to 64 [ 1.158092] bus: 00 index 0 io port: [0x00-0xffff] [ 1.158094] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 1.158096] bus: 02 index 0 io port: [0x3000-0x4fff] [ 1.158098] bus: 02 index 1 mmio: [0xd5800000-0xd67fffff] [ 1.158100] bus: 02 index 2 mmio: [0xd0400000-0xd14fffff] [ 1.158102] bus: 02 index 3 mmio: [0x0-0x0] [ 1.158103] bus: 03 index 0 io port: [0x2000-0x2fff] [ 1.158105] bus: 03 index 1 mmio: [0xd4700000-0xd57fffff] [ 1.158107] bus: 03 index 2 mmio: [0xd1500000-0xd24fffff] [ 1.158109] bus: 03 index 3 mmio: [0x0-0x0] [ 1.158111] bus: 06 index 0 io port: [0x1000-0x1fff] [ 1.158113] bus: 06 index 1 mmio: [0xd3700000-0xd46fffff] [ 1.158115] bus: 06 index 2 mmio: [0xd2500000-0xd34fffff] [ 1.158117] bus: 06 index 3 mmio: [0x0-0x0] [ 1.158118] bus: 04 index 0 mmio: [0x0-0x0] [ 1.158120] bus: 04 index 1 mmio: [0xd3600000-0xd36fffff] [ 1.158122] bus: 04 index 2 mmio: [0x0-0x0] [ 1.158124] bus: 04 index 3 io port: [0x00-0xffff] [ 1.158125] bus: 04 index 4 mmio: [0x000000-0xffffffff] [ 1.158132] NET: Registered protocol family 2 [ 1.168550] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.168757] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.169042] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.169191] TCP: Hash tables configured (established 131072 bind 65536) [ 1.169193] TCP reno registered [ 1.172563] NET: Registered protocol family 1 [ 1.172660] checking if image is initramfs... it is [ 1.774610] Freeing initrd memory: 7369k freed [ 1.774646] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 1.774648] Simple Boot Flag at 0x44 set to 0x1 [ 1.774811] cpufreq: No nForce2 chipset. [ 1.774939] audit: initializing netlink socket (disabled) [ 1.774956] type=2000 audit(1247173922.772:1): initialized [ 1.782158] highmem bounce pool size: 64 pages [ 1.782163] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.783393] VFS: Disk quotas dquot_6.5.1 [ 1.783447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.784002] fuse init (API version 7.10) [ 1.784080] msgmni has been set to 1675 [ 1.784244] alg: No test for stdrng (krng) [ 1.784254] io scheduler noop registered [ 1.784256] io scheduler anticipatory registered [ 1.784258] io scheduler deadline registered [ 1.784270] io scheduler cfq registered (default) [ 1.784281] pci 0000:00:02.0: Boot video device [ 9.784008] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 17.784008] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 17.787372] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 17.787422] pcieport-driver 0000:00:1c.0: found MSI capability [ 17.787458] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 17.787473] pci_express 0000:00:1c.0:pcie00: allocate port service [ 17.787487] pci_express 0000:00:1c.0:pcie02: allocate port service [ 17.787498] pci_express 0000:00:1c.0:pcie03: allocate port service [ 17.787568] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 17.787616] pcieport-driver 0000:00:1c.1: found MSI capability [ 17.787648] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 17.787663] pci_express 0000:00:1c.1:pcie00: allocate port service [ 17.787674] pci_express 0000:00:1c.1:pcie02: allocate port service [ 17.787685] pci_express 0000:00:1c.1:pcie03: allocate port service [ 17.787756] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 17.787803] pcieport-driver 0000:00:1c.4: found MSI capability [ 17.787835] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X [ 17.787850] pci_express 0000:00:1c.4:pcie00: allocate port service [ 17.787864] pci_express 0000:00:1c.4:pcie02: allocate port service [ 17.787875] pci_express 0000:00:1c.4:pcie03: allocate port service [ 17.787955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.788070] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 17.788222] ACPI: AC Adapter [ADP0] (off-line) [ 17.789306] ACPI: Battery Slot [BAT0] (battery present) [ 17.789378] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 17.789380] ACPI: Power Button (FF) [PWRF] [ 17.789420] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 17.789422] ACPI: Power Button (CM) [PWRB] [ 17.789462] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 17.791520] ACPI: Lid Switch [LID0] [ 17.791672] fan PNP0C0B:00: registered as cooling_device0 [ 17.791677] ACPI: Fan [FAN] (on) [ 17.792384] ACPI: SSDT B7B77C98, 0229 (r1 PmRef Cpu0Ist 3000 INTL 20051117) [ 17.792907] ACPI: SSDT B7B75598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117) [ 17.793474] Monitor-Mwait will be used to enter C-1 state [ 17.793477] Monitor-Mwait will be used to enter C-2 state [ 17.793479] Monitor-Mwait will be used to enter C-3 state [ 17.793493] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 17.793511] processor ACPI_CPU:00: registered as cooling_device1 [ 17.793515] ACPI: Processor [CPU0] (supports 8 throttling states) [ 17.794001] ACPI: SSDT B7B76E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117) [ 17.794533] ACPI: SSDT B7B77F18, 008D (r1 PmRef ApCst 3000 INTL 20051117) [ 17.795199] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 17.795216] processor ACPI_CPU:01: registered as cooling_device2 [ 17.795220] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.801400] thermal LNXTHERM:01: registered as thermal_zone0 [ 17.805847] ACPI: Thermal Zone [THRM] (33 C) [ 17.805896] isapnp: Scanning for PnP cards... [ 18.159715] isapnp: No Plug & Play device found [ 18.168736] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 18.169662] brd: module loaded [ 18.169947] loop: module loaded [ 18.170003] Fixed MDIO Bus: probed [ 18.170008] PPP generic driver version 2.4.2 [ 18.170060] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 18.170086] Driver 'sd' needs updating - please use bus_type methods [ 18.170094] Driver 'sr' needs updating - please use bus_type methods [ 18.170130] ahci 0000:00:1f.2: version 3.0 [ 18.170144] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 18.170180] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 18.170263] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 18.170266] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems [ 18.170271] ahci 0000:00:1f.2: setting latency timer to 64 [ 18.170521] scsi0 : ahci [ 18.170594] scsi1 : ahci [ 18.170646] scsi2 : ahci [ 18.170696] scsi3 : ahci [ 18.170747] scsi4 : ahci [ 18.170800] scsi5 : ahci [ 18.170962] ata1: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805100 irq 2300 [ 18.170966] ata2: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805180 irq 2300 [ 18.170968] ata3: DUMMY [ 18.170969] ata4: DUMMY [ 18.170972] ata5: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805300 irq 2300 [ 18.170975] ata6: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805380 irq 2300 [ 18.652014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 18.652470] ata1.00: ATA-8: FUJITSU MHZ2320BH G1, 00400209, max UDMA/100 [ 18.652473] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 18.653051] ata1.00: configured for UDMA/100 [ 18.988015] ata2: SATA link down (SStatus 0 SControl 300) [ 19.324015] ata5: SATA link down (SStatus 0 SControl 300) [ 20.228016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.249091] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633P, TO01, max UDMA/100, ATAPI AN [ 20.291697] ata6.00: configured for UDMA/100 [ 20.368103] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 0040 PQ: 0 ANSI: 5 [ 20.368194] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 20.368209] sd 0:0:0:0: [sda] Write Protect is off [ 20.368212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.368235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.368289] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 20.368302] sd 0:0:0:0: [sda] Write Protect is off [ 20.368305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.368327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.368330] sda: sda1 sda2 sda3 [ 20.773328] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.773366] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.802194] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633P TO01 PQ: 0 ANSI: 5 [ 20.952833] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 20.952836] Uniform CD-ROM driver Revision: 3.20 [ 20.952916] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 20.952951] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 20.953604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.953621] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 20.953634] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 20.953638] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 20.953684] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 20.957589] ehci_hcd 0000:00:1a.7: debug port 1 [ 20.957596] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 20.957608] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd6805c00 [ 20.972008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 20.972063] usb usb1: configuration #1 chosen from 1 choice [ 20.972089] hub 1-0:1.0: USB hub found [ 20.972096] hub 1-0:1.0: 4 ports detected [ 20.972187] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 20.972198] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 20.972201] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 20.972238] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 20.976141] ehci_hcd 0000:00:1d.7: debug port 1 [ 20.976147] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 20.976159] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6805800 [ 20.988008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 20.988059] usb usb2: configuration #1 chosen from 1 choice [ 20.988082] hub 2-0:1.0: USB hub found [ 20.988088] hub 2-0:1.0: 8 ports detected [ 20.988187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.988202] uhci_hcd: USB Universal Host Controller Interface driver [ 20.988220] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.988226] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 20.988229] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 20.988266] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 20.988299] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0 [ 20.988363] usb usb3: configuration #1 chosen from 1 choice [ 20.988389] hub 3-0:1.0: USB hub found [ 20.988395] hub 3-0:1.0: 2 ports detected [ 20.988474] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 20.988479] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 20.988483] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 20.988524] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 20.988557] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0 [ 20.988626] usb usb4: configuration #1 chosen from 1 choice [ 20.988649] hub 4-0:1.0: USB hub found [ 20.988654] hub 4-0:1.0: 2 ports detected [ 20.988733] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 20.988739] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 20.988743] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 20.988792] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 20.988818] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 20.988880] usb usb5: configuration #1 chosen from 1 choice [ 20.988902] hub 5-0:1.0: USB hub found [ 20.988910] hub 5-0:1.0: 2 ports detected [ 20.988987] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 20.988993] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 20.988996] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 20.989033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 20.989057] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080 [ 20.989120] usb usb6: configuration #1 chosen from 1 choice [ 20.989145] hub 6-0:1.0: USB hub found [ 20.989150] hub 6-0:1.0: 2 ports detected [ 20.989227] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 20.989233] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 20.989236] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 20.989276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 20.989300] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060 [ 20.989366] usb usb7: configuration #1 chosen from 1 choice [ 20.989388] hub 7-0:1.0: USB hub found [ 20.989393] hub 7-0:1.0: 2 ports detected [ 20.989470] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 20.989476] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 20.989479] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 20.989518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 20.989550] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040 [ 20.989613] usb usb8: configuration #1 chosen from 1 choice [ 20.989636] hub 8-0:1.0: USB hub found [ 20.989641] hub 8-0:1.0: 2 ports detected [ 20.989761] usbcore: registered new interface driver libusual [ 20.989787] usbcore: registered new interface driver usbserial [ 20.989797] USB Serial support registered for generic [ 20.989812] usbcore: registered new interface driver usbserial_generic [ 20.989814] usbserial: USB Serial Driver core [ 20.989854] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 21.020821] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.020826] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.024533] mice: PS/2 mouse device common for all mice [ 21.040561] rtc_cmos 00:03: RTC can wake from S4 [ 21.040591] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 21.040623] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 21.040674] device-mapper: uevent: version 1.0.3 [ 21.040746] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 21.040808] device-mapper: multipath: version 1.0.5 loaded [ 21.040810] device-mapper: multipath round-robin: version 1.0.0 loaded [ 21.040880] EISA: Probing bus 0 at eisa.0 [ 21.040886] Cannot allocate resource for EISA slot 1 [ 21.040888] Cannot allocate resource for EISA slot 2 [ 21.040890] Cannot allocate resource for EISA slot 3 [ 21.040892] Cannot allocate resource for EISA slot 4 [ 21.040894] Cannot allocate resource for EISA slot 5 [ 21.040907] EISA: Detected 0 cards. [ 21.041008] cpuidle: using governor ladder [ 21.041116] cpuidle: using governor menu [ 21.041582] TCP cubic registered [ 21.041670] NET: Registered protocol family 10 [ 21.042068] lo: Disabled Privacy Extensions [ 21.042380] NET: Registered protocol family 17 [ 21.042396] Bluetooth: L2CAP ver 2.11 [ 21.042397] Bluetooth: L2CAP socket layer initialized [ 21.042400] Bluetooth: SCO (Voice Link) ver 0.6 [ 21.042401] Bluetooth: SCO socket layer initialized [ 21.042431] Marking TSC unstable due to TSC halts in idle [ 21.042439] Bluetooth: RFCOMM socket layer initialized [ 21.042443] Bluetooth: RFCOMM TTY layer initialized [ 21.042445] Bluetooth: RFCOMM ver 1.10 [ 21.043012] Using IPI No-Shortcut mode [ 21.043072] registered taskstats version 1 [ 21.043199] Magic number: 1:79:247 [ 21.043262] rtc_cmos 00:03: setting system clock to 2009-07-09 21:12:22 UTC (1247173942) [ 21.043265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.043267] EDD information not available. [ 21.043495] Freeing unused kernel memory: 532k freed [ 21.043611] Write protecting the kernel text: 4128k [ 21.043654] Write protecting the kernel read-only data: 1532k [ 21.067437] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 21.104913] vesafb: framebuffer at 0xc0000000, mapped to 0xf7d00000, using 3072k, total 131008k [ 21.104917] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 21.104918] vesafb: scrolling: redraw [ 21.104920] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 21.104981] Console: switching to colour frame buffer device 128x48 [ 21.117049] fb0: VESA VGA frame buffer device [ 21.246755] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 21.246774] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.246825] r8169 0000:02:00.0: setting latency timer to 64 [ 21.247074] r8169 0000:02:00.0: irq 2299 for MSI/MSI-X [ 21.247711] eth0: RTL8102e at 0xf7c6c000, 00:1e:33:75:72:cf, XID 34a00000 IRQ 2299 [ 21.276044] ohci1394 0000:04:06.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 21.276051] ohci1394 0000:04:06.0: setting latency timer to 64 [ 21.328778] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d3600000-d36007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 21.332934] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 21.478016] usb 1-2: configuration #1 chosen from 1 choice [ 21.730157] PM: Starting manual resume from disk [ 21.730160] PM: Resume from partition 8:2 [ 21.730162] PM: Checking hibernation image. [ 21.730571] PM: Resume from disk failed. [ 21.763580] kjournald starting. Commit interval 5 seconds [ 21.763613] EXT3-fs: mounted filesystem with ordered data mode. [ 22.000073] Clocksource tsc unstable (delta = -383274898 ns) [ 22.604164] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080d1e337572cf] [ 26.511020] udev: starting version 141 [ 26.884137] cfg80211: Calling CRDA to update world regulatory domain [ 26.952624] iTCO_vendor_support: vendor-support=0 [ 27.019496] acpi device:05: registered as cooling_device3 [ 27.019968] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input5 [ 27.021883] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 27.022178] ricoh-mmc: Ricoh MMC Controller disabling driver [ 27.022180] ricoh-mmc: Copyright(c) Philip Langdale [ 27.022207] ricoh-mmc: Ricoh MMC controller found at 0000:04:06.2 [1180:0843] (rev 12) [ 27.022224] ricoh-mmc: Controller is now disabled. [ 27.046580] sdhci: Secure Digital Host Controller Interface driver [ 27.046582] sdhci: Copyright(c) Pierre Ossman [ 27.054008] sdhci-pci 0000:04:06.1: SDHCI controller found [1180:0822] (rev 22) [ 27.054024] sdhci-pci 0000:04:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 27.055066] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 27.057123] mmc0: SDHCI controller on PCI [0000:04:06.1] using DMA [ 27.075917] cfg80211: World regulatory domain updated: [ 27.075921] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.075924] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.075926] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.075928] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.075930] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.075932] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.121236] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 27.294842] Linux agpgart interface v0.103 [ 27.353729] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 27.353890] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 27.353968] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 27.486499] Linux video capture interface: v2.00 [ 27.502723] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 27.504286] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 27.506543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 27.621300] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 27.622422] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7 [ 27.622669] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 27.623867] usbcore: registered new interface driver uvcvideo [ 27.623890] USB Video Class driver (v0.1.0) [ 27.651598] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 27.651601] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 27.651749] iwlagn 0000:03:00.0: power state changed by ACPI to D0 [ 27.651762] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 27.651770] iwlagn 0000:03:00.0: setting latency timer to 64 [ 27.651817] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 27.674282] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels [ 27.674349] iwlagn 0000:03:00.0: irq 2298 for MSI/MSI-X [ 27.675282] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 27.785464] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 27.785521] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 27.817916] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 28.008563] lp: driver loaded but no devices found [ 28.068604] Adding 4883752k swap on /dev/sda2. Priority:-1 extents:1 across:4883752k [ 28.092197] EXT3 FS on sda1, internal journal [ 28.397125] kjournald starting. Commit interval 5 seconds [ 28.397543] EXT3 FS on sda3, internal journal [ 28.397548] EXT3-fs: mounted filesystem with ordered data mode. [ 28.659095] type=1505 audit(1247173950.112:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2035 [ 28.699838] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 28.699844] synaptics: Toshiba Satellite A305 detected, limiting rate to 40pps. [ 28.701283] type=1505 audit(1247173950.157:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2039 [ 28.701364] type=1505 audit(1247173950.157:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2039 [ 28.701401] type=1505 audit(1247173950.157:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2039 [ 28.701437] type=1505 audit(1247173950.157:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2039 [ 28.734384] type=1505 audit(1247173950.188:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2044 [ 28.778766] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 28.851753] type=1505 audit(1247173950.304:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2048 [ 28.851893] type=1505 audit(1247173950.304:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2048 [ 28.876709] type=1505 audit(1247173950.332:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2067 [ 29.012808] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.043380] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.043546] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 29.043548] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 29.043550] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 29.092646] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 37.091143] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 37.091145] vboxdrv: Successfully done. [ 37.091147] vboxdrv: Found 2 processor cores. [ 37.091214] vboxdrv: fAsync=0 offMin=0x17e offMax=0xd4d [ 37.091252] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 37.091253] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 37.844673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 37.844676] Bluetooth: BNEP filters: protocol multicast [ 37.862812] Bridge firewalling registered [ 38.637598] ppdev: user-space parallel port driver [ 41.075746] [drm] Initialized drm 1.1.0 20060810 [ 41.080438] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 41.080442] pci 0000:00:02.0: setting latency timer to 64 [ 41.080986] pci 0000:00:02.0: irq 2297 for MSI/MSI-X [ 41.081065] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 41.082027] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 42.543014] r8169: eth0: link down [ 42.543221] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.543801] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode [ 42.798739] Registered led device: iwl-phy0:radio [ 42.798759] Registered led device: iwl-phy0:assoc [ 42.798777] Registered led device: iwl-phy0:RX [ 42.798794] Registered led device: iwl-phy0:TX [ 43.296038] iwlagn: Error sending REPLY_ADD_STA: time out after 500ms. [ 43.297399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 52.780216] wlan0: authenticate with AP 00:21:91:74:79:46 [ 52.783727] wlan0: authenticated [ 52.783731] wlan0: associate with AP 00:21:91:74:79:46 [ 52.786229] wlan0: RX AssocResp from 00:21:91:74:79:46 (capab=0x431 status=0 aid=2) [ 52.786232] wlan0: associated [ 52.787679] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 52.936239] padlock: VIA PadLock not detected. [ 62.164723] CPU0 attaching NULL sched-domain. [ 62.164727] CPU1 attaching NULL sched-domain. [ 62.168371] CPU0 attaching sched-domain: [ 62.168373] domain 0: span 0-1 level MC [ 62.168376] groups: 0 1 [ 62.168380] domain 1: span 0-1 level CPU [ 62.168382] groups: 0-1 [ 62.168386] CPU1 attaching sched-domain: [ 62.168387] domain 0: span 0-1 level MC [ 62.168389] groups: 1 0 [ 62.168392] domain 1: span 0-1 level CPU [ 62.168394] groups: 0-1 [ 63.416528] wlan0: no IPv6 routers present [ 81.272548] end_request: I/O error, dev sr0, sector 0 [ 81.272554] Buffer I/O error on device sr0, logical block 0 [ 81.274000] end_request: I/O error, dev sr0, sector 0 [ 81.274003] Buffer I/O error on device sr0, logical block 0 [ 82.609661] cdrom: This disc doesn't have any tracks I recognize! [ 1007.459541] CPU0 attaching NULL sched-domain. [ 1007.459551] CPU1 attaching NULL sched-domain. [ 1007.461358] CPU0 attaching sched-domain: [ 1007.461365] domain 0: span 0-1 level MC [ 1007.461371] groups: 0 1 [ 1007.461384] CPU1 attaching sched-domain: [ 1007.461388] domain 0: span 0-1 level MC [ 1007.461393] groups: 1 0 [ 1007.821106] wlan0: disassociating by local choice (reason=3) [ 1009.246978] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 1009.435492] PM: Syncing filesystems ... done. [ 1009.448074] PM: Preparing system for mem sleep [ 1009.448078] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1009.448633] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1009.456542] PM: Entering mem sleep [ 1009.456556] Suspending console(s) (use no_console_suspend to debug) [ 1010.025694] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1010.025915] sd 0:0:0:0: [sda] Stopping disk [ 1011.079123] ricoh-mmc: Suspending. [ 1011.079132] ricoh-mmc: Controller is now re-enabled. [ 1011.080176] ACPI handle has no context! [ 1011.080182] sdhci-pci 0000:04:06.1: PCI INT B disabled [ 1011.080188] ACPI handle has no context! [ 1011.097127] ACPI handle has no context! [ 1011.128176] iwlagn 0000:03:00.0: power state changed by ACPI to D3 [ 1011.208249] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 1011.224149] uhci_hcd 0000:00:1d.3: PCI INT C disabled [ 1011.224203] uhci_hcd 0000:00:1d.2: PCI INT D disabled [ 1011.224251] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 1011.224297] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 1011.256118] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 1011.272158] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 1011.288147] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 1011.288201] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 1011.288280] PM: suspend devices took 1.832 seconds [ 1011.296017] ACPI: Preparing to enter system sleep state S3 [ 1011.301488] Disabling non-boot CPUs ... [ 1011.303778] NOHZ: local_softirq_pending 100 [ 1011.404021] CPU 1 is now offline [ 1011.404024] SMP alternatives: switching to UP code [ 1011.519309] CPU0 attaching NULL sched-domain. [ 1011.519312] CPU1 attaching NULL sched-domain. [ 1011.519495] CPU0 attaching NULL sched-domain. [ 1011.519621] CPU1 is down [ 1011.519621] Back to C! [ 1011.519621] Enabling non-boot CPUs ... [ 1011.519621] SMP alternatives: switching to SMP code [ 1011.663637] Booting processor 1 APIC 0x1 ip 0x6000 [ 1011.519196] Initializing CPU#1 [ 1011.519196] Calibrating delay using timer specific routine.. 3994.47 BogoMIPS (lpj=7988958) [ 1011.519196] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1011.519196] CPU: L2 cache: 3072K [ 1011.519196] CPU: Physical Processor ID: 0 [ 1011.519196] CPU: Processor Core ID: 1 [ 1011.756654] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 1011.756712] CPU0 attaching NULL sched-domain. [ 1011.760020] Switched to high resolution mode on CPU 1 [ 1011.764534] CPU0 attaching sched-domain: [ 1011.764536] domain 0: span 0-1 level MC [ 1011.764538] groups: 0 1 [ 1011.764541] CPU1 attaching sched-domain: [ 1011.764543] domain 0: span 0-1 level MC [ 1011.764544] groups: 1 0 [ 1011.768515] CPU1 is up [ 1011.768518] ACPI: Waking up from system sleep state S3 [ 1011.816345] pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x5111) [ 1011.816350] pci 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [ 1011.816355] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403) [ 1011.818497] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1011.818503] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1011.818562] usb usb3: root hub lost power or was reset [ 1011.818581] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1011.818586] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1011.818644] usb usb4: root hub lost power or was reset [ 1011.832098] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1011.832104] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1011.848074] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1011.848080] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 1011.848099] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1011.848105] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1011.848142] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 1011.848154] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd141d041) [ 1011.848159] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d580) [ 1011.848164] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x4030) [ 1011.848169] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 1011.848179] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1011.848218] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1011.848236] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1011.848248] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd241d151) [ 1011.848253] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd570d470) [ 1011.848258] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 1011.848263] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0x30300) [ 1011.848273] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1011.848312] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1011.848328] pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1011.848342] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd341d251) [ 1011.848347] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd460d370) [ 1011.848351] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x1010) [ 1011.848356] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x70600) [ 1011.848367] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1011.848406] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1011.848414] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1011.848418] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1011.848476] usb usb5: root hub lost power or was reset [ 1011.848494] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1011.848499] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1011.848567] usb usb6: root hub lost power or was reset [ 1011.848584] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1011.848589] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1011.848648] usb usb7: root hub lost power or was reset [ 1011.848664] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1011.848669] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1011.848726] usb usb8: root hub lost power or was reset [ 1011.864099] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1011.864105] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1011.864192] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1011.864202] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd360d360) [ 1011.864207] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 1011.864222] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 1011.864237] pci 0000:00:1e.0: setting latency timer to 64 [ 1011.880133] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 1011.880182] ahci 0000:00:1f.2: setting latency timer to 64 [ 1011.880347] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 1011.880404] r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c) [ 1011.880425] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd041000c) [ 1011.880448] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x3001) [ 1011.880465] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1011.880485] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1011.880731] iwlagn 0000:03:00.0: power state changed by ACPI to D0 [ 1011.880737] iwlagn 0000:03:00.0: power state changed by ACPI to D0 [ 1011.880744] iwlagn 0000:03:00.0: enabling device (0000 -> 0002) [ 1011.880783] iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1011.880819] iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4700004) [ 1011.880832] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 1011.896127] ohci1394 0000:04:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000) [ 1011.948806] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d3600000-d36007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1011.968105] sdhci-pci 0000:04:06.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1011.968128] sdhci-pci 0000:04:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3600b00) [ 1011.968137] sdhci-pci 0000:04:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1011.968153] sdhci-pci 0000:04:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1011.968156] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1011.969163] ricoh-mmc: Resuming. [ 1011.969172] ricoh-mmc: Controller is now disabled. [ 1011.969182] pci 0000:04:06.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 1011.969203] pci 0000:04:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xd3600800) [ 1011.969211] pci 0000:04:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1011.969351] sd 0:0:0:0: [sda] Starting disk [ 1012.204107] ata5: SATA link down (SStatus 0 SControl 300) [ 1012.204126] ata2: SATA link down (SStatus 0 SControl 300) [ 1012.368095] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1012.450886] ata6.00: configured for UDMA/100 [ 1012.532099] ata6: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 1012.532101] ata6: irq_stat 0x40000001 [ 1012.607528] ata6.00: configured for UDMA/100 [ 1012.607531] ata6: EH complete [ 1014.048097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1014.155281] ata1.00: configured for UDMA/100 [ 1014.168135] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1014.168154] sd 0:0:0:0: [sda] Write Protect is off [ 1014.168156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1014.168187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1014.592096] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 1014.752074] pci 0000:00:02.0: setting latency timer to 64 [ 1014.753268] PM: resume devices took 2.944 seconds [ 1014.753302] PM: Finishing wakeup. [ 1014.753303] Restarting tasks ... done. [ 1014.833376] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 1015.137951] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 1015.333669] usb 5-1: configuration #1 chosen from 1 choice [ 1015.338715] r8169: eth0: link down [ 1015.338918] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1015.374966] Registered led device: iwl-phy0:radio [ 1015.374987] Registered led device: iwl-phy0:assoc [ 1015.375006] Registered led device: iwl-phy0:RX [ 1015.375025] Registered led device: iwl-phy0:TX [ 1015.405318] usbcore: registered new interface driver hiddev [ 1015.420873] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9 [ 1015.428775] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1015.444237] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 1015.444260] usbcore: registered new interface driver usbhid [ 1015.444264] usbhid: v2.6:USB HID core driver [ 1018.606855] CPU0 attaching NULL sched-domain. [ 1018.606866] CPU1 attaching NULL sched-domain. [ 1018.611428] CPU0 attaching sched-domain: [ 1018.611435] domain 0: span 0-1 level MC [ 1018.611441] groups: 0 1 [ 1018.611451] domain 1: span 0-1 level CPU [ 1018.611457] groups: 0-1 [ 1018.611469] CPU1 attaching sched-domain: [ 1018.611473] domain 0: span 0-1 level MC [ 1018.611478] groups: 1 0 [ 1018.611485] domain 1: span 0-1 level CPU [ 1018.611490] groups: 0-1 [ 1024.880064] wlan0: authenticate with AP 00:21:91:74:79:46 [ 1024.882150] wlan0: authenticated [ 1024.882157] wlan0: associate with AP 00:21:91:74:79:46 [ 1024.884971] wlan0: RX AssocResp from 00:21:91:74:79:46 (capab=0x431 status=0 aid=2) [ 1024.884977] wlan0: associated [ 1024.890489] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1035.832241] wlan0: no IPv6 routers present [ 3917.848091] ACPI: EC: missing confirmations, switch off interrupt mode. [ 5396.080476] CPU0 attaching NULL sched-domain. [ 5396.080486] CPU1 attaching NULL sched-domain. [ 5396.094917] CPU0 attaching sched-domain: [ 5396.094924] domain 0: span 0-1 level MC [ 5396.094930] groups: 0 1 [ 5396.094943] CPU1 attaching sched-domain: [ 5396.094947] domain 0: span 0-1 level MC [ 5396.094952] groups: 1 0 [ 5701.554278] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.