[ 0.000000] BIOS EBDA/lowmem at: 0009f400/0009f400 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-13-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #44-Ubuntu SMP Tue Jun 2 07:57:31 UTC 2009 (Ubuntu 2.6.28-13.44-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003befa000 (ACPI data) [ 0.000000] BIOS-e820: 000000003befa000 - 000000003bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003bef0000 (usable) [ 0.000000] modified: 000000003bef0000 - 000000003befa000 (ACPI data) [ 0.000000] modified: 000000003befa000 - 000000003bf00000 (ACPI NVS) [ 0.000000] modified: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378ba000 - 37fef0b3 [ 0.000000] Allocated new RAMDISK: 0087b000 - 00fb00b3 [ 0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fef0b2 to 0087b000 - 00fb00b2 [ 0.000000] ACPI: RSDP 000F7F60, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3BEF617C, 0034 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3BEF9E1D, 0074 (r1 SiS 755F 6040000 PTL F4240) [ 0.000000] ACPI: DSDT 3BEF61B0, 3C6D (r1 PTLTD 755 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BEFAFC0, 0040 [ 0.000000] ACPI: SSDT 3BEF9E91, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 3BEF9F88, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3BEF9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 74MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac] [ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000] [ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087b000 - 0000fb00b3] NEW RAMDISK ==> [000087b000 - 0000fb00b3] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f7fd0] 000f7fd0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003bef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0003bef0 [ 0.000000] On node 0 totalpages: 245365 [ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 150 pages used for memmap [ 0.000000] HighMem zone: 19036 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243447 [ 0.000000] Kernel command line: root=UUID=11a14c8c-ec74-40d4-8cff-924a320898ca ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.007 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 4909760 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 952752k/981952k available (4110k kernel code, 28412k reserved, 2197k data, 532k init, 76744k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB) [ 0.004000] .data : 0xc05039df - 0xc0728e60 (2197 kB) [ 0.004000] .text : 0xc0100000 - 0xc05039df (4110 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.01 BogoMIPS (lpj=8000028) [ 0.004026] Security Framework initialized [ 0.004033] SELinux: Disabled at boot. [ 0.004052] AppArmor: AppArmor initialized [ 0.004060] Mount-cache hash table entries: 512 [ 0.004176] Initializing cgroup subsys ns [ 0.004180] Initializing cgroup subsys cpuacct [ 0.004182] Initializing cgroup subsys memory [ 0.004186] Initializing cgroup subsys freezer [ 0.004198] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004200] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004211] Checking 'hlt' instruction... OK. [ 0.020558] SMP alternatives: switching to UP code [ 0.134332] Freeing SMP alternatives: 18k freed [ 0.134337] ACPI: Core revision 20080926 [ 0.135879] ACPI: Checking initramfs for custom DSDT [ 0.416537] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.457400] CPU0: AMD Turion(tm) 64 Mobile Technology ML-37 stepping 02 [ 0.460001] Brought up 1 CPUs [ 0.460001] Total of 1 processors activated (4000.01 BogoMIPS). [ 0.460001] CPU0 attaching NULL sched-domain. [ 0.460001] net_namespace: 776 bytes [ 0.460001] Booting paravirtualized kernel on bare hardware [ 0.460001] Time: 16:09:45 Date: 06/25/09 [ 0.460001] regulator: core version 0.5 [ 0.460001] NET: Registered protocol family 16 [ 0.460001] EISA bus registered [ 0.460001] ACPI: bus type pci registered [ 0.460001] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1 [ 0.460001] PCI: Using configuration type 1 for base access [ 0.460001] ACPI: EC: Look up EC in DSDT [ 0.460304] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.484060] ACPI: Interpreter enabled [ 0.484063] ACPI: (supports S0 S3 S4 S5) [ 0.484077] ACPI: Using IOAPIC for interrupt routing [ 0.488471] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.488473] ACPI: EC: driver started in interrupt mode [ 0.488549] ACPI: No dock devices found. [ 0.488557] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.488603] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.488679] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.488705] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f] [ 0.488727] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.488731] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.488736] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.488740] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.488745] pci 0000:00:02.5: reg 20 io port: [0x2000-0x200f] [ 0.488772] pci 0000:00:02.6: reg 10 io port: [0x1000-0x10ff] [ 0.488777] pci 0000:00:02.6: reg 14 io port: [0x1c00-0x1c7f] [ 0.488797] pci 0000:00:02.6: supports D1 D2 [ 0.488799] pci 0000:00:02.6: PME# supported from D3hot D3cold [ 0.488803] pci 0000:00:02.6: PME# disabled [ 0.488823] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] [ 0.488828] pci 0000:00:02.7: reg 14 io port: [0x1c80-0x1cff] [ 0.488849] pci 0000:00:02.7: supports D1 D2 [ 0.488850] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.488853] pci 0000:00:02.7: PME# disabled [ 0.488868] pci 0000:00:03.0: reg 10 32bit mmio: [0xe2002000-0xe2002fff] [ 0.488898] pci 0000:00:03.1: reg 10 32bit mmio: [0xe2003000-0xe2003fff] [ 0.488933] pci 0000:00:03.2: reg 10 32bit mmio: [0xe2004000-0xe2004fff] [ 0.488954] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.488957] pci 0000:00:03.2: PME# disabled [ 0.488981] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff] [ 0.488986] pci 0000:00:04.0: reg 14 32bit mmio: [0xe2005000-0xe2005fff] [ 0.489002] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.489009] pci 0000:00:04.0: supports D1 D2 [ 0.489011] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489014] pci 0000:00:04.0: PME# disabled [ 0.489036] pci 0000:00:06.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.489043] pci 0000:00:06.0: supports D1 D2 [ 0.489045] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489048] pci 0000:00:06.0: PME# disabled [ 0.489065] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe2000000-0xe2001fff] [ 0.489166] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.489170] pci 0000:01:00.0: reg 14 32bit mmio: [0xe2100000-0xe211ffff] [ 0.489173] pci 0000:01:00.0: reg 18 io port: [0xa000-0xa07f] [ 0.489183] pci 0000:01:00.0: supports D1 D2 [ 0.489200] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.489204] pci 0000:00:01.0: bridge 32bit mmio: [0xe2100000-0xe21fffff] [ 0.489207] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.489224] bus 00 -> node 0 [ 0.489229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.495190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) [ 0.495284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) [ 0.495375] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) [ 0.495466] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) [ 0.495578] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) [ 0.495669] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) [ 0.495757] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 0.495846] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) [ 0.495962] ACPI: WMI: Mapper loaded [ 0.496111] SCSI subsystem initialized [ 0.496151] libata version 3.00 loaded. [ 0.496189] usbcore: registered new interface driver usbfs [ 0.496204] usbcore: registered new interface driver hub [ 0.496227] usbcore: registered new device driver usb [ 0.496326] PCI: Using ACPI for IRQ routing [ 0.496393] Bluetooth: Core ver 2.13 [ 0.496393] NET: Registered protocol family 31 [ 0.496393] Bluetooth: HCI device and connection manager initialized [ 0.496393] Bluetooth: HCI socket layer initialized [ 0.496393] NET: Registered protocol family 8 [ 0.496393] NET: Registered protocol family 20 [ 0.496393] NetLabel: Initializing [ 0.496393] NetLabel: domain hash size = 128 [ 0.496393] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.496393] NetLabel: unlabeled traffic allowed by default [ 0.496393] AppArmor: AppArmor Filesystem Enabled [ 0.496393] pnp: PnP ACPI init [ 0.496393] ACPI: bus type pnp registered [ 0.497591] pnp: PnP ACPI: found 8 devices [ 0.497593] ACPI: ACPI bus type pnp unregistered [ 0.497596] PnPBIOS: Disabled by ACPI PNP [ 0.497605] system 00:04: ioport range 0x8000-0x807f has been reserved [ 0.497607] system 00:04: ioport range 0x8080-0x80ff has been reserved [ 0.497610] system 00:04: ioport range 0x8100-0x811f has been reserved [ 0.497612] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.497615] system 00:04: ioport range 0x3f0-0x3f1 has been reserved [ 0.497618] system 00:04: iomem range 0xfec00000-0xfecfffff has been reserved [ 0.497621] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.497624] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.497627] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved [ 0.497629] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved [ 0.497632] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved [ 0.497635] system 00:04: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.497638] system 00:04: iomem range 0xffff0000-0xffffffff has been reserved [ 0.532843] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.532846] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.532850] pci 0000:00:01.0: MEM window: 0xe2100000-0xe21fffff [ 0.532854] pci 0000:00:01.0: PREFETCH window: 0x000000e8000000-0x000000efffffff [ 0.532859] pci 0000:00:06.0: CardBus bridge, secondary bus 0000:02 [ 0.532861] pci 0000:00:06.0: IO window: 0x002400-0x0024ff [ 0.532865] pci 0000:00:06.0: IO window: 0x002800-0x0028ff [ 0.532868] pci 0000:00:06.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.532872] pci 0000:00:06.0: MEM window: 0x54000000-0x57ffffff [ 0.532883] pci 0000:00:06.0: enabling device (0000 -> 0003) [ 0.532891] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.532896] bus: 00 index 0 io port: [0x00-0xffff] [ 0.532898] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.532900] bus: 01 index 0 io port: [0xa000-0xafff] [ 0.532902] bus: 01 index 1 mmio: [0xe2100000-0xe21fffff] [ 0.532904] bus: 01 index 2 mmio: [0xe8000000-0xefffffff] [ 0.532906] bus: 01 index 3 mmio: [0x0-0x0] [ 0.532908] bus: 02 index 0 io port: [0x2400-0x24ff] [ 0.532910] bus: 02 index 1 io port: [0x2800-0x28ff] [ 0.532912] bus: 02 index 2 mmio: [0x50000000-0x53ffffff] [ 0.532914] bus: 02 index 3 mmio: [0x54000000-0x57ffffff] [ 0.532923] NET: Registered protocol family 2 [ 0.533017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.533341] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.534405] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.535015] TCP: Hash tables configured (established 131072 bind 65536) [ 0.535018] TCP reno registered [ 0.535142] NET: Registered protocol family 1 [ 0.535291] checking if image is initramfs... it is [ 1.036056] Switched to high resolution mode on CPU 0 [ 1.118955] Freeing initrd memory: 7380k freed [ 1.118999] Simple Boot Flag at 0x38 set to 0x1 [ 1.119078] cpufreq: No nForce2 chipset. [ 1.119223] audit: initializing netlink socket (disabled) [ 1.119243] type=2000 audit(1245946185.116:1): initialized [ 1.127108] highmem bounce pool size: 64 pages [ 1.127114] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.128301] VFS: Disk quotas dquot_6.5.1 [ 1.128360] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.128940] fuse init (API version 7.10) [ 1.129011] msgmni has been set to 1725 [ 1.129175] alg: No test for stdrng (krng) [ 1.129185] io scheduler noop registered [ 1.129187] io scheduler anticipatory registered [ 1.129189] io scheduler deadline registered [ 1.129204] io scheduler cfq registered (default) [ 1.546295] pci 0000:01:00.0: Boot video device [ 1.547116] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.547123] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.549290] ACPI: AC Adapter [ACAD] (on-line) [ 1.549339] ACPI: Battery Slot [BAT1] (battery absent) [ 1.549401] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.549404] ACPI: Power Button (FF) [PWRF] [ 1.549448] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.552198] ACPI: Lid Switch [LID] [ 1.552237] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.552239] ACPI: Power Button (CM) [PWRB] [ 1.552278] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.552281] ACPI: Sleep Button (CM) [SLPB] [ 1.552426] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.552445] processor ACPI_CPU:00: registered as cooling_device0 [ 1.555266] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.561070] ACPI: Thermal Zone [THRM] (52 C) [ 1.561107] isapnp: Scanning for PnP cards... [ 1.914304] isapnp: No Plug & Play device found [ 1.915263] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.915496] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.915500] serial 0000:00:02.6: PCI INT C disabled [ 1.916102] brd: module loaded [ 1.916375] loop: module loaded [ 1.916438] Fixed MDIO Bus: probed [ 1.916444] PPP generic driver version 2.4.2 [ 1.916495] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.916517] Driver 'sd' needs updating - please use bus_type methods [ 1.916525] Driver 'sr' needs updating - please use bus_type methods [ 1.917015] pata_sis 0000:00:02.5: version 0.5.2 [ 1.917024] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.917177] scsi0 : pata_sis [ 1.917251] scsi1 : pata_sis [ 1.917376] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 [ 1.917379] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 [ 2.080399] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70S, max UDMA/100 [ 2.080402] ata1.00: 156301488 sectors, multi 16: LBA48 [ 2.096409] ata1.00: configured for UDMA/100 [ 2.260204] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, VRS2, max UDMA/33 [ 2.276223] ata2.00: configured for UDMA/33 [ 2.276604] scsi 0:0:0:0: Direct-Access ATA HTS421280H9AT00 HA3O PQ: 0 ANSI: 5 [ 2.276684] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.276698] sd 0:0:0:0: [sda] Write Protect is off [ 2.276701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.276720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.276769] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.276781] sd 0:0:0:0: [sda] Write Protect is off [ 2.276783] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.276801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.276805] sda: sda1 sda2 < sda5 sda6 sda7 > [ 2.340435] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.340469] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.340987] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S VRS2 PQ: 0 ANSI: 5 [ 2.343671] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.343674] Uniform CD-ROM driver Revision: 3.20 [ 2.343747] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.343777] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.343873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.343890] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.343912] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 2.343969] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 2.344006] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported [ 2.344021] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000 [ 2.356006] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 2.356074] usb usb1: configuration #1 chosen from 1 choice [ 2.356099] hub 1-0:1.0: USB hub found [ 2.356108] hub 1-0:1.0: 6 ports detected [ 2.356202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.356218] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.356226] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 2.356260] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 2.356279] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000 [ 2.412060] usb usb2: configuration #1 chosen from 1 choice [ 2.412082] hub 2-0:1.0: USB hub found [ 2.412090] hub 2-0:1.0: 3 ports detected [ 2.412161] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.412173] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 2.412208] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 2.412226] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000 [ 2.468060] usb usb3: configuration #1 chosen from 1 choice [ 2.468079] hub 3-0:1.0: USB hub found [ 2.468089] hub 3-0:1.0: 3 ports detected [ 2.468161] uhci_hcd: USB Universal Host Controller Interface driver [ 2.468219] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.471790] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.471794] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.471892] mice: PS/2 mouse device common for all mice [ 2.472035] rtc_cmos 00:02: RTC can wake from S4 [ 2.472066] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.472091] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.472148] device-mapper: uevent: version 1.0.3 [ 2.472237] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.472279] device-mapper: multipath: version 1.0.5 loaded [ 2.472281] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.472356] EISA: Probing bus 0 at eisa.0 [ 2.472363] Cannot allocate resource for EISA slot 1 [ 2.472365] Cannot allocate resource for EISA slot 2 [ 2.472383] Cannot allocate resource for EISA slot 8 [ 2.472385] EISA: Detected 0 cards. [ 2.472438] cpuidle: using governor ladder [ 2.472487] cpuidle: using governor menu [ 2.472934] TCP cubic registered [ 2.473029] NET: Registered protocol family 10 [ 2.473394] lo: Disabled Privacy Extensions [ 2.473675] NET: Registered protocol family 17 [ 2.473691] Bluetooth: L2CAP ver 2.11 [ 2.473692] Bluetooth: L2CAP socket layer initialized [ 2.473695] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.473696] Bluetooth: SCO socket layer initialized [ 2.473717] Bluetooth: RFCOMM socket layer initialized [ 2.473725] Bluetooth: RFCOMM TTY layer initialized [ 2.473727] Bluetooth: RFCOMM ver 1.10 [ 2.473747] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-37 processors (1 cpu cores) (version 2.20.00) [ 2.473784] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x4 [ 2.473786] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 2.473788] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x8 [ 2.473790] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16 [ 2.473824] Using IPI No-Shortcut mode [ 2.473890] registered taskstats version 1 [ 2.473977] Magic number: 13:192:187 [ 2.474058] rtc_cmos 00:02: setting system clock to 2009-06-25 16:09:47 UTC (1245946187) [ 2.474061] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.474063] EDD information not available. [ 2.474583] Freeing unused kernel memory: 532k freed [ 2.474711] Write protecting the kernel text: 4112k [ 2.474755] Write protecting the kernel read-only data: 1524k [ 2.517382] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.920019] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 3.112473] sis900.c: v1.08.10 Apr. 2 2006 [ 3.112514] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.117169] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. [ 3.123075] 0000:00:04.0: Using transceiver found at address 13 as default [ 3.124352] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:aa:cf:50 [ 3.131401] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.143503] usb 2-2: configuration #1 chosen from 1 choice [ 3.188075] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0 [ 3.355218] usbcore: registered new interface driver hiddev [ 3.363182] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input6 [ 3.363377] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:03.0-2/input0 [ 3.363393] usbcore: registered new interface driver usbhid [ 3.363397] usbhid: v2.6:USB HID core driver [ 3.372152] Marking TSC unstable due to TSC halts in idle [ 3.486610] PM: Starting manual resume from disk [ 3.486613] PM: Resume from partition 8:5 [ 3.486615] PM: Checking hibernation image. [ 3.486771] PM: Resume from disk failed. [ 3.532393] kjournald starting. Commit interval 5 seconds [ 3.532402] EXT3-fs: mounted filesystem with ordered data mode. [ 10.826821] udev: starting version 141 [ 11.287510] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 11.432828] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 11.455646] Linux agpgart interface v0.103 [ 11.522865] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760] [ 11.524524] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000 [ 11.558619] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.575915] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 [ 11.594923] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083] [ 11.594938] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI [ 11.594940] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI [ 11.594945] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64 [ 11.618447] acer-wmi: Acer Laptop ACPI-WMI Extras [ 11.618460] acer-wmi: No or unsupported WMI interface, unable to load [ 11.623925] cfg80211: Calling CRDA to update world regulatory domain [ 11.715509] cfg80211: World regulatory domain updated: [ 11.715513] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.715516] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.715519] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.715521] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.715523] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.715526] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.825016] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19 [ 11.825021] yenta_cardbus 0000:00:06.0: Socket status: 30000007 [ 12.117478] b43-phy0: Broadcom 4318 WLAN found [ 12.150972] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 12.194338] phy0: Selected rate control algorithm 'pid' [ 12.206426] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 12.356656] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 12.358194] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 12.472074] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 12.473688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f [ 12.474339] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 12.474903] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 12.475606] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 13.184020] intel8x0_measure_ac97_clock: measured 55469 usecs [ 13.184022] intel8x0: clocking to 48000 [ 13.359630] lp: driver loaded but no devices found [ 13.421524] sisfb: Video ROM found [ 13.424423] sisfb: Video RAM at 0xe8000000, mapped to 0xf8600000, size 65536k [ 13.424426] sisfb: MMIO at 0xe2100000, mapped to 0xf7e00000, size 128k [ 13.424429] sisfb: Memory heap starting at 64928K, size 32K [ 14.389299] sisfb: Detected SiS302LV video bridge [ 14.448373] sisfb: Detected 1280x800 flat panel [ 14.448378] sisfb: Detected LCD PDC1 0x04 (for LCD=CRT1) [ 14.448385] sisfb: Default mode is 1280x800x8 (60Hz) [ 14.448398] sisfb: Initial vbflags 0x8000012 [ 14.451206] Console: switching to colour frame buffer device 160x50 [ 14.451214] sisfb: 2D acceleration is enabled, y-panning enabled (auto-max) [ 14.451217] fb0: SiS 760 frame buffer device version 1.8.9 [ 14.451219] sisfb: Copyright (C) 2001-2005 Thomas Winischhofer [ 14.551420] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k [ 15.082225] EXT3 FS on sda6, internal journal [ 16.484561] kjournald starting. Commit interval 5 seconds [ 16.484776] EXT3 FS on sda1, internal journal [ 16.484781] EXT3-fs: mounted filesystem with ordered data mode. [ 16.505814] kjournald starting. Commit interval 5 seconds [ 16.506082] EXT3 FS on sda7, internal journal [ 16.506085] EXT3-fs: mounted filesystem with ordered data mode. [ 16.770894] type=1505 audit(1245946201.793:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1954 [ 16.822215] type=1505 audit(1245946201.845:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1958 [ 16.822381] type=1505 audit(1245946201.845:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1958 [ 16.822431] type=1505 audit(1245946201.845:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1958 [ 16.822480] type=1505 audit(1245946201.845:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1958 [ 16.970261] type=1505 audit(1245946201.993:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1963 [ 16.970522] type=1505 audit(1245946201.993:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1963 [ 17.050293] type=1505 audit(1245946202.073:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=1967 [ 17.080663] type=1505 audit(1245946202.105:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1971 [ 23.984539] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 23.984542] vboxdrv: Successfully done. [ 23.984545] vboxdrv: Found 1 processor cores. [ 23.984650] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 23.984652] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 25.367376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.367379] Bluetooth: BNEP filters: protocol multicast [ 25.385863] Bridge firewalling registered [ 27.700024] ppdev: user-space parallel port driver