Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.13.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 (Ubuntu 3.13.0-36.63-generic 3.13.11.6) Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0 --verbose KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001fffdfff] usable BIOS-e820: [mem 0x000000001fffe000-0x000000001fffffff] reserved BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved NX (Execute Disable) protection: active SMBIOS 2.4 present. Hypervisor detected: KVM No AGP bridge found e820: last_pfn = 0x1fffe max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 found SMP MP-table at [mem 0x000f0b60-0x000f0b6f] mapped at [ffff8800000f0b60] Scanning 1 areas for low memory corruption init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x1fc00000-0x1fdfffff] init_memory_mapping: [mem 0x1c000000-0x1fbfffff] init_memory_mapping: [mem 0x00100000-0x1bffffff] init_memory_mapping: [mem 0x1fe00000-0x1fffdfff] RAMDISK: [mem 0x1f1fb000-0x1f8e8fff] ACPI: RSDP 00000000000f09d0 000014 (v00 BOCHS ) ACPI: RSDT 000000001ffffbc1 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000001ffff1c0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000001fffe040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 000000001fffe000 000040 ACPI: SSDT 000000001ffff234 0008DD (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000001ffffb11 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000001ffffb89 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000001fffdfff] Initmem setup node 0 [mem 0x00000000-0x1fffdfff] NODE_DATA [mem 0x1fff9000-0x1fffdfff] kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1fff5001, boot clock Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x1fffdfff] ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices Booting paravirtualized kernel on KVM setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff88001fc00000 s86336 r8192 d24256 u2097152 kvm-clock: cpu 0, msr 0:1fff5001, primary cpu clock KVM setup async PF for cpu 0 kvm-stealtime: cpu 0, msr 1fc0dfc0 Built 1 zonelists in Node order, mobility grouping on. Total pages: 128903 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0 --verbose PID hash table entries: 2048 (order: 2, 16384 bytes) Checking aperture... No AGP bridge found Memory: 491852K/523888K available (7373K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 32036K reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. Offload RCU callbacks from all CPUs Offload RCU callbacks from CPUs: 0. NR_IRQS:16640 nr_irqs:256 16 Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS0] enabled allocated 2097152 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Detected 2800.000 MHz processor Calibrating delay loop (skipped) preset value.. 5600.00 BogoMIPS (lpj=11200000) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor initialized Yama: becoming mindful. Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys hugetlb mce: CPU supports 10 MCE banks Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: -1 Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000) ACPI: Core revision 20131115 ACPI: All ACPI Tables successfully acquired ftrace: allocating 28537 entries in 112 pages Enabling x2apic Enabled x2apic Switched APIC routing to physical x2apic. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: AMD QEMU Virtual CPU version 2.0.0 (fam: 06, model: 06, stepping: 03) Performance Events: Broken PMU hardware detected, using software events only. Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff) x86: Booted up 1 node, 1 CPUs smpboot: Total of 1 processors activated (5600.00 BogoMIPS) NMI watchdog: disabled (cpu0): hardware events not enabled devtmpfs: initialized EVM: security.selinux EVM: security.SMACK64 EVM: security.ima EVM: security.capability pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters RTC time: 13:19:16, date: 10/08/14 NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 16 GPEs in block 00 to 0F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switched to clocksource kvm-clock AppArmor: AppArmor Filesystem Enabled pnp: PnP ACPI init ACPI: bus type PNP registered pnp: PnP ACPI: found 8 devices ACPI: bus type PNP unregistered NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 4, 65536 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 7096K (ffff88001f1fb000 - ffff88001f8e9000) microcode: AMD CPU family 0x6 not supported Scanning for low memory corruption every 60 seconds Initialise system trusted keyring audit: initializing netlink socket (disabled) type=2000 audit(1412774356.945:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages zbud: loaded VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.22) msgmni has been set to 974 Key type big_key registered Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ipmi message handler version 39.2 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] GHES: HEST is not enabled! ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Linux agpgart interface v0.103 brd: module loaded loop: module loaded blk-mq: CPU -> queue map CPU 0 -> Queue 0 vda: vda1 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc080 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc088 irq 15 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PPP generic driver version 2.4.2 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver uhci_hcd: USB Universal Host Controller Interface driver i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com ledtrig-cpu: registered to indicate activity on CPUs TCP: cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5' registered taskstats version 1 Key type trusted registered Key type encrypted registered AppArmor: AppArmor sha1 policy hashing enabled IMA: No TPM chip found, activating TPM-bypass! regulator-dummy: disabling Magic number: 2:275:331 tty tty52: hash matches rtc_cmos 00:00: setting system clock to 2014-10-08 13:19:17 UTC (1412774357) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. ata2.00: ATAPI: QEMU DVD-ROM, 2.0.0, max UDMA/100 ata2.00: configured for MWDMA2 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.0. PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi generic sg0 type 5 Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000) Write protecting the kernel read-only data: 12288k Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000) Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) Loading, please wait... systemd-udevd[94]: starting version 204 Floppy drive(s): fd0 is 1.44M FDC 0 is a S82078B tsc: Refined TSC clocksource calibration: 2799.998 MHz input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. random: init urandom read with 23 bits of entropy available init: Handling startup event init: mountall goal changed from stop to start init: mountall state changed from waiting to starting init: hostname goal changed from stop to start init: hostname state changed from waiting to starting init: plymouth-ready (startup) goal changed from stop to start init: plymouth-ready (startup) state changed from waiting to starting init: plymouth-upstart-bridge goal changed from stop to start init: plymouth-upstart-bridge state changed from waiting to starting init: Handling starting event init: hwclock goal changed from stop to start init: hwclock state changed from waiting to starting init: Handling starting event init: hostname state changed from starting to security init: hostname state changed from security to pre-start init: hostname state changed from pre-start to spawned init: hostname main process (179) init: hostname state changed from spawned to post-start init: hostname state changed from post-start to running init: Handling starting event init: plymouth-ready (startup) state changed from starting to security init: plymouth-ready (startup) state changed from security to pre-start init: plymouth-ready (startup) state changed from pre-start to spawned init: plymouth-ready (startup) main process (180) init: plymouth-ready (startup) state changed from spawned to post-start init: plymouth-ready (startup) state changed from post-start to running init: Handling starting event init: plymouth-upstart-bridge state changed from starting to security init: plymouth-upstart-bridge state changed from security to pre-start init: plymouth-upstart-bridge state changed from pre-start to spawned init: plymouth-upstart-bridge main process (181) init: plymouth-upstart-bridge state changed from spawned to post-start init: plymouth-upstart-bridge state changed from post-start to running init: Handling starting event init: hwclock state changed from starting to security init: hwclock state changed from security to pre-start init: hwclock state changed from pre-start to spawned init: hwclock main process (182) init: hwclock state changed from spawned to post-start init: hwclock state changed from post-start to running init: Handling started event init: startpar-bridge (hostname--started) goal changed from stop to start init: startpar-bridge (hostname--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (plymouth-ready-startup-started) goal changed from stop to start init: startpar-bridge (plymouth-ready-startup-started) state changed from waiting to starting init: Handling started event init: startpar-bridge (plymouth-upstart-bridge--started) goal changed from stop to start init: startpar-bridge (plymouth-upstart-bridge--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (hwclock--started) goal changed from stop to start init: startpar-bridge (hwclock--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (hostname--started) state changed from starting to security init: startpar-bridge (hostname--started) state changed from security to pre-start init: startpar-bridge (hostname--started) state changed from pre-start to spawned init: startpar-bridge (hostname--started) main process (183) init: startpar-bridge (hostname--started) state changed from spawned to post-start init: startpar-bridge (hostname--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (plymouth-ready-startup-started) state changed from starting to security init: startpar-bridge (plymouth-ready-startup-started) state changed from security to pre-start init: startpar-bridge (plymouth-ready-startup-started) state changed from pre-start to spawned init: startpar-bridge (plymouth-ready-startup-started) main process (184) init: startpar-bridge (plymouth-ready-startup-started) state changed from spawned to post-start init: startpar-bridge (plymouth-ready-startup-started) state changed from post-start to running init: Handling starting event init: startpar-bridge (plymouth-upstart-bridge--started) state changed from starting to security init: startpar-bridge (plymouth-upstart-bridge--started) state changed from security to pre-start init: startpar-bridge (plymouth-upstart-bridge--started) state changed from pre-start to spawned init: startpar-bridge (plymouth-upstart-bridge--started) main process (185) init: startpar-bridge (plymouth-upstart-bridge--started) state changed from spawned to post-start init: startpar-bridge (plymouth-upstart-bridge--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (hwclock--started) state changed from starting to security init: startpar-bridge (hwclock--started) state changed from security to pre-start init: startpar-bridge (hwclock--started) state changed from pre-start to spawned init: startpar-bridge (hwclock--started) main process (186) init: startpar-bridge (hwclock--started) state changed from spawned to post-start init: startpar-bridge (hwclock--started) state changed from post-start to running init: Handling started event init: Handling started event init: Handling started event init: Handling started event init: Connection from private client init: hostname main process (179) exited normally init: hostname goal changed from start to stop init: hostname state changed from running to stopping init: hwclock main process (182) exited normally init: hwclock goal changed from start to stop init: hwclock state changed from running to stopping init: startpar-bridge (hostname--started) main process (183) exited normally init: startpar-bridge (hostname--started) goal changed from start to stop init: startpar-bridge (hostname--started) state changed from running to stopping init: startpar-bridge (plymouth-ready-startup-started) main process (184) exited normally init: startpar-bridge (plymouth-ready-startup-started) goal changed from start to stop init: startpar-bridge (plymouth-ready-startup-started) state changed from running to stopping init: startpar-bridge (plymouth-upstart-bridge--started) main process (185) exited normally init: startpar-bridge (plymouth-upstart-bridge--started) goal changed from start to stop init: startpar-bridge (plymouth-upstart-bridge--started) state changed from running to stopping init: startpar-bridge (hwclock--started) main process (186) exited normally init: startpar-bridge (hwclock--started) goal changed from start to stop init: startpar-bridge (hwclock--started) state changed from running to stopping init: Handling stopping event init: hostname state changed from stopping to killed init: hostname state changed from killed to post-stop init: hostname state changed from post-stop to waiting init: Handling stopping event init: hwclock state changed from stopping to killed init: hwclock state changed from killed to post-stop init: hwclock state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (hostname--started) state changed from stopping to killed init: startpar-bridge (hostname--started) state changed from killed to post-stop init: startpar-bridge (hostname--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (plymouth-ready-startup-started) state changed from stopping to killed init: startpar-bridge (plymouth-ready-startup-started) state changed from killed to post-stop init: startpar-bridge (plymouth-ready-startup-started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (plymouth-upstart-bridge--started) state changed from stopping to killed init: startpar-bridge (plymouth-upstart-bridge--started) state changed from killed to post-stop init: startpar-bridge (plymouth-upstart-bridge--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (hwclock--started) state changed from stopping to killed init: startpar-bridge (hwclock--started) state changed from killed to post-stop init: startpar-bridge (hwclock--started) state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (hostname--stopped) goal changed from stop to start init: startpar-bridge (hostname--stopped) state changed from waiting to starting init: Handling stopped event init: startpar-bridge (hwclock--stopped) goal changed from stop to start init: startpar-bridge (hwclock--stopped) state changed from waiting to starting init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling starting event init: startpar-bridge (hostname--stopped) state changed from starting to security init: startpar-bridge (hostname--stopped) state changed from security to pre-start init: startpar-bridge (hostname--stopped) state changed from pre-start to spawned init: startpar-bridge (hostname--stopped) main process (189) init: startpar-bridge (hostname--stopped) state changed from spawned to post-start init: startpar-bridge (hostname--stopped) state changed from post-start to running init: Handling starting event init: startpar-bridge (hwclock--stopped) state changed from starting to security init: startpar-bridge (hwclock--stopped) state changed from security to pre-start init: startpar-bridge (hwclock--stopped) state changed from pre-start to spawned init: startpar-bridge (hwclock--stopped) main process (190) init: startpar-bridge (hwclock--stopped) state changed from spawned to post-start init: startpar-bridge (hwclock--stopped) state changed from post-start to running init: Handling started event init: Handling started event init: mountall state changed from starting to security init: mountall state changed from security to pre-start init: mountall state changed from pre-start to spawned init: mountall main process (191) init: Connection from private client init: startpar-bridge (hostname--stopped) main process (189) exited normally init: startpar-bridge (hostname--stopped) goal changed from start to stop init: startpar-bridge (hostname--stopped) state changed from running to stopping init: startpar-bridge (hwclock--stopped) main process (190) exited normally init: startpar-bridge (hwclock--stopped) goal changed from start to stop init: startpar-bridge (hwclock--stopped) state changed from running to stopping init: mountall main process (191) executable changed init: Handling stopping event init: startpar-bridge (hostname--stopped) state changed from stopping to killed init: startpar-bridge (hostname--stopped) state changed from killed to post-stop init: startpar-bridge (hostname--stopped) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (hwclock--stopped) state changed from stopping to killed init: startpar-bridge (hwclock--stopped) state changed from killed to post-stop init: startpar-bridge (hwclock--stopped) state changed from post-stop to waiting init: Handling stopped event init: Handling stopped event init: Connection from private client init: mountall main process (191) became new process (192) init: mountall main process (192) became new process (193) init: mountall state changed from spawned to post-start init: mountall state changed from post-start to running init: Handling started event init: startpar-bridge (mountall--started) goal changed from stop to start init: startpar-bridge (mountall--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (mountall--started) state changed from starting to security init: startpar-bridge (mountall--started) state changed from security to pre-start init: startpar-bridge (mountall--started) state changed from pre-start to spawned init: startpar-bridge (mountall--started) main process (194) init: startpar-bridge (mountall--started) state changed from spawned to post-start init: startpar-bridge (mountall--started) state changed from post-start to running init: Handling started event init: startpar-bridge (mountall--started) main process (194) exited normally init: startpar-bridge (mountall--started) goal changed from start to stop init: startpar-bridge (mountall--started) state changed from running to stopping init: Handling mounted event init: mounted-proc goal changed from stop to start init: mounted-proc state changed from waiting to starting init: Handling mounted event init: Handling mounted event init: mounted-dev goal changed from stop to start init: mounted-dev state changed from waiting to starting init: Handling mounted event init: Handling mounted event init: resolvconf goal changed from stop to start init: resolvconf state changed from waiting to starting init: mounted-run goal changed from stop to start init: mounted-run state changed from waiting to starting init: container-detect goal changed from stop to start init: container-detect state changed from waiting to starting init: Handling mountallServer event init: Handling stopping event init: startpar-bridge (mountall--started) state changed from stopping to killed init: startpar-bridge (mountall--started) state changed from killed to post-stop init: startpar-bridge (mountall--started) state changed from post-stop to waiting init: Handling starting event init: mounted-proc state changed from starting to security init: mounted-proc state changed from security to pre-start init: mounted-proc state changed from pre-start to spawned init: mounted-proc main process (195) init: mounted-proc state changed from spawned to post-start init: mounted-proc state changed from post-start to running init: Handling starting event init: mounted-dev state changed from starting to security init: mounted-dev state changed from security to pre-start init: mounted-dev state changed from pre-start to spawned init: mounted-dev main process (197) init: mounted-dev state changed from spawned to post-start init: mounted-dev state changed from post-start to running init: Handling starting event init: resolvconf state changed from starting to security init: resolvconf state changed from security to pre-start init: resolvconf pre-start process (198) init: Handling starting event init: mounted-run state changed from starting to security init: mounted-run state changed from security to pre-start init: mounted-run state changed from pre-start to spawned init: mounted-run main process (199) init: mounted-run state changed from spawned to post-start init: mounted-run state changed from post-start to running init: Handling starting event init: container-detect state changed from starting to security init: container-detect state changed from security to pre-start init: container-detect pre-start process (200) init: Handling stopped event init: Handling started event init: startpar-bridge (mounted-proc--started) goal changed from stop to start init: startpar-bridge (mounted-proc--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (mounted-dev--started) goal changed from stop to start init: startpar-bridge (mounted-dev--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (mounted-run--started) goal changed from stop to start init: startpar-bridge (mounted-run--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (mounted-proc--started) state changed from starting to security init: startpar-bridge (mounted-proc--started) state changed from security to pre-start init: startpar-bridge (mounted-proc--started) state changed from pre-start to spawned init: startpar-bridge (mounted-proc--started) main process (201) init: startpar-bridge (mounted-proc--started) state changed from spawned to post-start init: startpar-bridge (mounted-proc--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (mounted-dev--started) state changed from starting to security init: startpar-bridge (mounted-dev--started) state changed from security to pre-start init: startpar-bridge (mounted-dev--started) state changed from pre-start to spawned init: startpar-bridge (mounted-dev--started) main process (202) init: startpar-bridge (mounted-dev--started) state changed from spawned to post-start init: startpar-bridge (mounted-dev--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (mounted-run--started) state changed from starting to security init: startpar-bridge (mounted-run--started) state changed from security to pre-start init: startpar-bridge (mounted-run--started) state changed from pre-start to spawned init: startpar-bridge (mounted-run--started) main process (203) init: startpar-bridge (mounted-run--started) state changed from spawned to post-start init: startpar-bridge (mounted-run--started) state changed from post-start to running init: Handling started event init: Handling started event init: Handling started event init: mounted-proc main process (195) exited normally init: mounted-proc goal changed from start to stop init: mounted-proc state changed from running to stopping init: mounted-dev main process (197) exited normally init: mounted-dev goal changed from start to stop init: mounted-dev state changed from running to stopping init: mounted-run main process (199) exited normally init: mounted-run goal changed from start to stop init: mounted-run state changed from running to stopping init: startpar-bridge (mounted-proc--started) main process (201) exited normally init: startpar-bridge (mounted-proc--started) goal changed from start to stop init: startpar-bridge (mounted-proc--started) state changed from running to stopping init: startpar-bridge (mounted-dev--started) main process (202) exited normally init: startpar-bridge (mounted-dev--started) goal changed from start to stop init: startpar-bridge (mounted-dev--started) state changed from running to stopping init: startpar-bridge (mounted-run--started) main process (203) exited normally init: startpar-bridge (mounted-run--started) goal changed from start to stop init: startpar-bridge (mounted-run--started) state changed from running to stopping init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling mounting event init: Handling stopping event init: mounted-proc state changed from stopping to killed init: mounted-proc state changed from killed to post-stop init: mounted-proc state changed from post-stop to waiting init: Handling stopping event init: mounted-dev state changed from stopping to killed init: mounted-dev state changed from killed to post-stop init: mounted-dev state changed from post-stop to waiting init: Handling stopping event init: mounted-run state changed from stopping to killed init: mounted-run state changed from killed to post-stop init: mounted-run state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-proc--started) state changed from stopping to killed init: startpar-bridge (mounted-proc--started) state changed from killed to post-stop init: startpar-bridge (mounted-proc--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-dev--started) state changed from stopping to killed init: startpar-bridge (mounted-dev--started) state changed from killed to post-stop init: startpar-bridge (mounted-dev--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-run--started) state changed from stopping to killed init: startpar-bridge (mounted-run--started) state changed from killed to post-stop init: startpar-bridge (mounted-run--started) state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (mounted-proc--stopped) goal changed from stop to start init: startpar-bridge (mounted-proc--stopped) state changed from waiting to starting init: Handling stopped event init: startpar-bridge (mounted-dev--stopped) goal changed from stop to start init: startpar-bridge (mounted-dev--stopped) state changed from waiting to starting init: Handling stopped event init: startpar-bridge (mounted-run--stopped) goal changed from stop to start init: startpar-bridge (mounted-run--stopped) state changed from waiting to starting init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling starting event init: startpar-bridge (mounted-proc--stopped) state changed from starting to security init: startpar-bridge (mounted-proc--stopped) state changed from security to pre-start init: startpar-bridge (mounted-proc--stopped) state changed from pre-start to spawned init: startpar-bridge (mounted-proc--stopped) main process (250) init: startpar-bridge (mounted-proc--stopped) state changed from spawned to post-start init: startpar-bridge (mounted-proc--stopped) state changed from post-start to running init: Handling starting event init: startpar-bridge (mounted-dev--stopped) state changed from starting to security init: startpar-bridge (mounted-dev--stopped) state changed from security to pre-start init: startpar-bridge (mounted-dev--stopped) state changed from pre-start to spawned init: startpar-bridge (mounted-dev--stopped) main process (251) init: startpar-bridge (mounted-dev--stopped) state changed from spawned to post-start init: startpar-bridge (mounted-dev--stopped) state changed from post-start to running init: Handling starting event init: startpar-bridge (mounted-run--stopped) state changed from starting to security init: startpar-bridge (mounted-run--stopped) state changed from security to pre-start init: startpar-bridge (mounted-run--stopped) state changed from pre-start to spawned init: startpar-bridge (mounted-run--stopped) main process (252) init: startpar-bridge (mounted-run--stopped) state changed from spawned to post-start init: startpar-bridge (mounted-run--stopped) state changed from post-start to running init: Handling started event init: Handling started event init: Handling started event init: Connection from private client init: resolvconf pre-start process (198) exited normally init: resolvconf state changed from pre-start to spawned init: resolvconf state changed from spawned to post-start init: resolvconf state changed from post-start to running init: startpar-bridge (mounted-proc--stopped) main process (250) exited normally init: startpar-bridge (mounted-proc--stopped) goal changed from start to stop init: startpar-bridge (mounted-proc--stopped) state changed from running to stopping init: startpar-bridge (mounted-dev--stopped) main process (251) exited normally init: startpar-bridge (mounted-dev--stopped) goal changed from start to stop init: startpar-bridge (mounted-dev--stopped) state changed from running to stopping init: startpar-bridge (mounted-run--stopped) main process (252) exited normally init: startpar-bridge (mounted-run--stopped) goal changed from start to stop init: startpar-bridge (mounted-run--stopped) state changed from running to stopping init: Handling all-swaps event init: Handling started event init: startpar-bridge (resolvconf--started) goal changed from stop to start init: startpar-bridge (resolvconf--started) state changed from waiting to starting init: Handling stopping event init: startpar-bridge (mounted-proc--stopped) state changed from stopping to killed EXT4-fs (vda1): re-mounted. Opts: (null) init: startpar-bridge (mounted-proc--stopped) state changed from killed to post-stop init: startpar-bridge (mounted-proc--stopped) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-dev--stopped) state changed from stopping to killed init: startpar-bridge (mounted-dev--stopped) state changed from killed to post-stop init: startpar-bridge (mounted-dev--stopped) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-run--stopped) state changed from stopping to killed init: startpar-bridge (mounted-run--stopped) state changed from killed to post-stop init: startpar-bridge (mounted-run--stopped) state changed from post-stop to waiting init: Handling starting event init: startpar-bridge (resolvconf--started) state changed from starting to security init: startpar-bridge (resolvconf--started) state changed from security to pre-start init: startpar-bridge (resolvconf--started) state changed from pre-start to spawned init: startpar-bridge (resolvconf--started) main process (268) init: startpar-bridge (resolvconf--started) state changed from spawned to post-start init: startpar-bridge (resolvconf--started) state changed from post-start to running init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling started event init: Connection from private client init: startpar-bridge (resolvconf--started) main process (268) exited normally init: startpar-bridge (resolvconf--started) goal changed from start to stop init: startpar-bridge (resolvconf--started) state changed from running to stopping init: Handling plymouth-ready event init: Handling stopping event init: startpar-bridge (resolvconf--started) state changed from stopping to killed init: startpar-bridge (resolvconf--started) state changed from killed to post-stop init: startpar-bridge (resolvconf--started) state changed from post-stop to waiting init: Handling stopped event init: Connection from private client init: plymouth-ready (startup) main process (180) exited normally init: plymouth-ready (startup) goal changed from start to stop init: plymouth-ready (startup) state changed from running to stopping init: Handling mounted event init: Handling mounted event init: Handling mounted event init: mounted-debugfs goal changed from stop to start init: mounted-debugfs state changed from waiting to starting init: Handling mounted event init: Handling mounted event init: Handling mounted event init: Handling mounted event init: Handling mounted event init: Handling mounted event init: checkroot.sh goal changed from stop to start init: checkroot.sh state changed from waiting to starting init: checkfs.sh goal changed from stop to start init: checkfs.sh state changed from waiting to starting init: checkroot-bootclean.sh goal changed from stop to start init: checkroot-bootclean.sh state changed from waiting to starting init: cloud-init-local goal changed from stop to start init: cloud-init-local state changed from waiting to starting init: Handling not-container event init: Handling stopping event init: plymouth-ready (startup) state changed from stopping to killed init: plymouth-ready (startup) state changed from killed to post-stop init: plymouth-ready (startup) state changed from post-stop to waiting init: Handling starting event init: mounted-debugfs state changed from starting to security init: mounted-debugfs state changed from security to pre-start init: mounted-debugfs state changed from pre-start to spawned init: mounted-debugfs main process (280) init: mounted-debugfs state changed from spawned to post-start init: mounted-debugfs state changed from post-start to running init: Handling starting event init: checkroot.sh state changed from starting to security init: checkroot.sh state changed from security to pre-start init: checkroot.sh state changed from pre-start to spawned init: checkroot.sh state changed from spawned to post-start init: checkroot.sh state changed from post-start to running init: Handling starting event init: checkfs.sh state changed from starting to security init: checkfs.sh state changed from security to pre-start init: checkfs.sh state changed from pre-start to spawned init: checkfs.sh state changed from spawned to post-start init: checkfs.sh state changed from post-start to running init: Handling starting event init: checkroot-bootclean.sh state changed from starting to security init: checkroot-bootclean.sh state changed from security to pre-start init: checkroot-bootclean.sh state changed from pre-start to spawned init: checkroot-bootclean.sh state changed from spawned to post-start init: checkroot-bootclean.sh state changed from post-start to running init: Handling starting event init: cloud-init-local state changed from starting to security init: cloud-init-local state changed from security to pre-start init: cloud-init-local state changed from pre-start to spawned init: cloud-init-local main process (283) init: cloud-init-local state changed from spawned to post-start init: cloud-init-local state changed from post-start to running init: Handling stopped event init: startpar-bridge (plymouth-ready-startup-stopped) goal changed from stop to start init: startpar-bridge (plymouth-ready-startup-stopped) state changed from waiting to starting init: Handling started event init: startpar-bridge (mounted-debugfs--started) goal changed from stop to start init: startpar-bridge (mounted-debugfs--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (checkroot.sh--started) goal changed from stop to start init: startpar-bridge (checkroot.sh--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (checkfs.sh--started) goal changed from stop to start init: startpar-bridge (checkfs.sh--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (checkroot-bootclean.sh--started) goal changed from stop to start init: startpar-bridge (checkroot-bootclean.sh--started) state changed from waiting to starting init: Handling started event init: startpar-bridge (cloud-init-local--started) goal changed from stop to start init: startpar-bridge (cloud-init-local--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (plymouth-ready-startup-stopped) state changed from starting to security init: startpar-bridge (plymouth-ready-startup-stopped) state changed from security to pre-start init: startpar-bridge (plymouth-ready-startup-stopped) state changed from pre-start to spawned init: startpar-bridge (plymouth-ready-startup-stopped) main process (285) init: startpar-bridge (plymouth-ready-startup-stopped) state changed from spawned to post-start init: startpar-bridge (plymouth-ready-startup-stopped) state changed from post-start to running init: Handling starting event init: startpar-bridge (mounted-debugfs--started) state changed from starting to security init: startpar-bridge (mounted-debugfs--started) state changed from security to pre-start init: startpar-bridge (mounted-debugfs--started) state changed from pre-start to spawned init: startpar-bridge (mounted-debugfs--started) main process (286) init: startpar-bridge (mounted-debugfs--started) state changed from spawned to post-start init: startpar-bridge (mounted-debugfs--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (checkroot.sh--started) state changed from starting to security init: startpar-bridge (checkroot.sh--started) state changed from security to pre-start init: startpar-bridge (checkroot.sh--started) state changed from pre-start to spawned init: startpar-bridge (checkroot.sh--started) main process (290) init: startpar-bridge (checkroot.sh--started) state changed from spawned to post-start init: startpar-bridge (checkroot.sh--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (checkfs.sh--started) state changed from starting to security init: startpar-bridge (checkfs.sh--started) state changed from security to pre-start init: startpar-bridge (checkfs.sh--started) state changed from pre-start to spawned init: startpar-bridge (checkfs.sh--started) main process (293) init: startpar-bridge (checkfs.sh--started) state changed from spawned to post-start init: startpar-bridge (checkfs.sh--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (checkroot-bootclean.sh--started) state changed from starting to security init: startpar-bridge (checkroot-bootclean.sh--started) state changed from security to pre-start init: startpar-bridge (checkroot-bootclean.sh--started) state changed from pre-start to spawned init: startpar-bridge (checkroot-bootclean.sh--started) main process (297) init: startpar-bridge (checkroot-bootclean.sh--started) state changed from spawned to post-start init: startpar-bridge (checkroot-bootclean.sh--started) state changed from post-start to running init: Handling starting event init: startpar-bridge (cloud-init-local--started) state changed from starting to security init: startpar-bridge (cloud-init-local--started) state changed from security to pre-start init: startpar-bridge (cloud-init-local--started) state changed from pre-start to spawned init: startpar-bridge (cloud-init-local--started) main process (301) init: startpar-bridge (cloud-init-local--started) state changed from spawned to post-start init: startpar-bridge (cloud-init-local--started) state changed from post-start to running init: Handling started event init: Handling started event init: Handling started event init: Handling started event init: Handling started event init: Handling started event init: mounted-debugfs main process (280) exited normally init: mounted-debugfs goal changed from start to stop init: mounted-debugfs state changed from running to stopping init: startpar-bridge (plymouth-ready-startup-stopped) main process (285) exited normally init: startpar-bridge (plymouth-ready-startup-stopped) goal changed from start to stop init: startpar-bridge (plymouth-ready-startup-stopped) state changed from running to stopping init: startpar-bridge (mounted-debugfs--started) main process (286) exited normally init: startpar-bridge (mounted-debugfs--started) goal changed from start to stop init: startpar-bridge (mounted-debugfs--started) state changed from running to stopping init: startpar-bridge (checkroot.sh--started) main process (290) exited normally init: startpar-bridge (checkroot.sh--started) goal changed from start to stop init: startpar-bridge (checkroot.sh--started) state changed from running to stopping init: startpar-bridge (checkfs.sh--started) main process (293) exited normally init: startpar-bridge (checkfs.sh--started) goal changed from start to stop init: startpar-bridge (checkfs.sh--started) state changed from running to stopping init: startpar-bridge (checkroot-bootclean.sh--started) main process (297) exited normally init: startpar-bridge (checkroot-bootclean.sh--started) goal changed from start to stop init: startpar-bridge (checkroot-bootclean.sh--started) state changed from running to stopping init: startpar-bridge (cloud-init-local--started) main process (301) exited normally init: startpar-bridge (cloud-init-local--started) goal changed from start to stop init: startpar-bridge (cloud-init-local--started) state changed from running to stopping init: Handling stopping event init: mounted-debugfs state changed from stopping to killed init: mounted-debugfs state changed from killed to post-stop init: mounted-debugfs state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (plymouth-ready-startup-stopped) state changed from stopping to killed init: startpar-bridge (plymouth-ready-startup-stopped) state changed from killed to post-stop init: startpar-bridge (plymouth-ready-startup-stopped) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (mounted-debugfs--started) state changed from stopping to killed init: startpar-bridge (mounted-debugfs--started) state changed from killed to post-stop init: startpar-bridge (mounted-debugfs--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (checkroot.sh--started) state changed from stopping to killed init: startpar-bridge (checkroot.sh--started) state changed from killed to post-stop init: startpar-bridge (checkroot.sh--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (checkfs.sh--started) state changed from stopping to killed init: startpar-bridge (checkfs.sh--started) state changed from killed to post-stop init: startpar-bridge (checkfs.sh--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (checkroot-bootclean.sh--started) state changed from stopping to killed init: startpar-bridge (checkroot-bootclean.sh--started) state changed from killed to post-stop init: startpar-bridge (checkroot-bootclean.sh--started) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (cloud-init-local--started) state changed from stopping to killed init: startpar-bridge (cloud-init-local--started) state changed from killed to post-stop init: startpar-bridge (cloud-init-local--started) state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (mounted-debugfs--stopped) goal changed from stop to start init: startpar-bridge (mounted-debugfs--stopped) state changed from waiting to starting init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling stopped event init: Handling starting event init: startpar-bridge (mounted-debugfs--stopped) state changed from starting to security init: startpar-bridge (mounted-debugfs--stopped) state changed from security to pre-start init: startpar-bridge (mounted-debugfs--stopped) state changed from pre-start to spawned init: startpar-bridge (mounted-debugfs--stopped) main process (306) init: startpar-bridge (mounted-debugfs--stopped) state changed from spawned to post-start init: startpar-bridge (mounted-debugfs--stopped) state changed from post-start to running init: Handling started event init: Connection from private client * Starting Initialize or finalize resolvconf[ OK ] init: startpar-bridge (mounted-debugfs--stopped) main process (306) exited normally init: startpar-bridge (mounted-debugfs--stopped) goal changed from start to stop init: startpar-bridge (mounted-debugfs--stopped) state changed from running to stopping init: Handling mounting event init: Handling stopping event init: startpar-bridge (mounted-debugfs--stopped) state changed from stopping to killed init: startpar-bridge (mounted-debugfs--stopped) state changed from killed to post-stop init: startpar-bridge (mounted-debugfs--stopped) state changed from post-stop to waiting init: Handling stopped event init: container-detect goal changed from start to stop init: Handling mounted event * Starting Signal sysvinit that the rootfs is mounted[ OK ] init: mounted-tmp goal changed from stop to start init: mounted-tmp state changed from waiting to starting init: Handling starting event init: mounted-tmp state changed from starting to security init: mounted-tmp state changed from security to pre-start init: mounted-tmp state changed from pre-start to spawned init: mounted-tmp main process (308) init: mounted-tmp state changed from spawned to post-start init: mounted-tmp state changed from post-start to running init: Handling started event init: startpar-bridge (mounted-tmp--started) goal changed from stop to start init: startpar-bridge (mounted-tmp--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (mounted-tmp--started) state changed from starting to security init: startpar-bridge (mounted-tmp--started) state changed from security to pre-start init: startpar-bridge (mounted-tmp--started) state changed from pre-start to spawned init: startpar-bridge (mounted-tmp--started) main process (309) init: startpar-bridge (mounted-tmp--started) state changed from spawned to post-start init: startpar-bridge (mounted-tmp--started) state changed from post-start to running init: Handling started event init: container-detect pre-start process (200) exited normally init: container-detect state changed from pre-start to stopping init: startpar-bridge (mounted-tmp--started) main process (309) exited normally init: startpar-bridge (mounted-tmp--started) goal changed from start to stop init: startpar-bridge (mounted-tmp--started) state changed from running to stopping init: Handling stopping event init: container-detect state changed from stopping to killed init: container-detect state changed from killed to post-stop init: container-detect state changed from post-stop to waiting * Stopping Track if upstart is running in a container[ OK ] init: Handling stopping event init: startpar-bridge (mounted-tmp--started) state changed from stopping to killed init: startpar-bridge (mounted-tmp--started) state changed from killed to post-stop init: startpar-bridge (mounted-tmp--started) state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (container-detect--stopped) goal changed from stop to start init: startpar-bridge (container-detect--stopped) state changed from waiting to starting init: Handling stopped event init: Handling starting event init: startpar-bridge (container-detect--stopped) state changed from starting to security init: startpar-bridge (container-detect--stopped) state changed from security to pre-start init: startpar-bridge (container-detect--stopped) state changed from pre-start to spawned init: startpar-bridge (container-detect--stopped) main process (318) init: startpar-bridge (container-detect--stopped) state changed from spawned to post-start init: startpar-bridge (container-detect--stopped) state changed from post-start to running init: Handling started event init: mounted-tmp main process (308) exited normally init: mounted-tmp goal changed from start to stop * Starting Clean /tmp directory[ OK ] init: mounted-tmp state changed from running to stopping init: startpar-bridge (container-detect--stopped) main process (318) exited normally init: startpar-bridge (container-detect--stopped) goal changed from start to stop init: startpar-bridge (container-detect--stopped) state changed from running to stopping init: Handling stopping event init: mounted-tmp state changed from stopping to killed init: mounted-tmp state changed from killed to post-stop init: mounted-tmp state changed from post-stop to waiting * Stopping Clean /tmp directory[ OK ] init: Handling stopping event Cloud-init v. 0.7.5 running 'init-local' at Wed, 08 Oct 2014 13:19:25 +0000. Up 8.50 seconds. init: startpar-bridge (container-detect--stopped) state changed from stopping to killed init: startpar-bridge (container-detect--stopped) state changed from killed to post-stop init: startpar-bridge (container-detect--stopped) state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (mounted-tmp--stopped) goal changed from stop to start init: startpar-bridge (mounted-tmp--stopped) state changed from waiting to starting init: Handling stopped event init: Handling starting event init: startpar-bridge (mounted-tmp--stopped) state changed from starting to security init: startpar-bridge (mounted-tmp--stopped) state changed from security to pre-start init: startpar-bridge (mounted-tmp--stopped) state changed from pre-start to spawned init: startpar-bridge (mounted-tmp--stopped) main process (322) init: startpar-bridge (mounted-tmp--stopped) state changed from spawned to post-start init: startpar-bridge (mounted-tmp--stopped) state changed from post-start to running init: Handling started event init: startpar-bridge (mounted-tmp--stopped) main process (322) exited normally init: startpar-bridge (mounted-tmp--stopped) goal changed from start to stop init: startpar-bridge (mounted-tmp--stopped) state changed from running to stopping init: Handling stopping event init: startpar-bridge (mounted-tmp--stopped) state changed from stopping to killed init: startpar-bridge (mounted-tmp--stopped) state changed from killed to post-stop init: startpar-bridge (mounted-tmp--stopped) state changed from post-stop to waiting init: Handling stopped event init: cloud-init-local main process (283) exited normally init: cloud-init-local goal changed from start to stop init: cloud-init-local state changed from running to stopping init: Handling stopping event init: cloud-init-local state changed from stopping to killed init: cloud-init-local state changed from killed to post-stop init: cloud-init-local state changed from post-stop to waiting init: Handling stopped event init: startpar-bridge (cloud-init-local--stopped) goal changed from stop to start init: startpar-bridge (cloud-init-local--stopped) state changed from waiting to starting init: cloud-init-nonet goal changed from stop to start init: cloud-init-nonet state changed from waiting to starting init: Handling starting event init: startpar-bridge (cloud-init-local--stopped) state changed from starting to security init: startpar-bridge (cloud-init-local--stopped) state changed from security to pre-start init: startpar-bridge (cloud-init-local--stopped) state changed from pre-start to spawned init: startpar-bridge (cloud-init-local--stopped) main process (323) init: startpar-bridge (cloud-init-local--stopped) state changed from spawned to post-start init: startpar-bridge (cloud-init-local--stopped) state changed from post-start to running init: Handling starting event init: cloud-init-nonet state changed from starting to security init: cloud-init-nonet state changed from security to pre-start init: cloud-init-nonet state changed from pre-start to spawned init: cloud-init-nonet main process (324) init: cloud-init-nonet state changed from spawned to post-start init: cloud-init-nonet state changed from post-start to running init: Handling started event init: Handling started event init: startpar-bridge (cloud-init-nonet--started) goal changed from stop to start init: startpar-bridge (cloud-init-nonet--started) state changed from waiting to starting init: Handling starting event init: startpar-bridge (cloud-init-nonet--started) state changed from starting to security init: startpar-bridge (cloud-init-nonet--started) state changed from security to pre-start init: startpar-bridge (cloud-init-nonet--started) state changed from pre-start to spawned init: startpar-bridge (cloud-init-nonet--started) main process (325) init: startpar-bridge (cloud-init-nonet--started) state changed from spawned to post-start init: startpar-bridge (cloud-init-nonet--started) state changed from post-start to running init: Handling started event cloud-init-nonet[9.48]: waiting 10 seconds for network device init: startpar-bridge (cloud-init-local--stopped) main process (323) exited normally init: startpar-bridge (cloud-init-local--stopped) goal changed from start to stop init: startpar-bridge (cloud-init-local--stopped) state changed from running to stopping init: startpar-bridge (cloud-init-nonet--started) main process (325) exited normally init: startpar-bridge (cloud-init-nonet--started) goal changed from start to stop init: startpar-bridge (cloud-init-nonet--started) state changed from running to stopping init: Handling stopping event init: startpar-bridge (cloud-init-local--stopped) state changed from stopping to killed init: startpar-bridge (cloud-init-local--stopped) state changed from killed to post-stop init: startpar-bridge (cloud-init-local--stopped) state changed from post-stop to waiting init: Handling stopping event init: startpar-bridge (cloud-init-nonet--started) state changed from stopping to killed init: startpar-bridge (cloud-init-nonet--started) state changed from killed to post-stop init: startpar-bridge (cloud-init-nonet--started) state changed from post-stop to waiting init: Handling stopped event init: Handling stopped event init: Handling virtual-filesystems event init: mountnfs-bootclean.sh goal changed from stop to start init: mountnfs-bootclean.sh state changed from waiting to starting init: udev goal changed from stop to start init: udev state changed from waiting to starting init: console-setup goal changed from stop to start init: console-setup state changed from waiting to starting init: mountkernfs.sh goal changed from stop to start init: mountkernfs.sh state changed from waiting to starting init: bootmisc.sh goal changed from stop to start init: bootmisc.sh state changed from waiting to starting init: mountdevsubfs.sh goal changed from stop to start init: mountdevsubfs.sh state changed from waiting to starting init: mtab.sh goal changed from stop to start init: mtab.sh state changed from waiting to starting init: mountall-bootclean.sh goal changed from stop to start init: mountall-bootclean.sh state changed from waiting to starting init: procps (virtual-filesystems) goal changed from stop to start init: procps (virtual-filesystems) state changed from waiting to starting init: Handling starting event init: mountnfs-bootclean.sh state changed from starting to security init: mountnfs-bootclean.sh state changed from security to pre-start init: mountnfs-bootclean.sh state changed from pre-start to spawned init: mountnfs-bootclean.sh state changed from spawned to post-start init: mountnfs-bootclean.sh state changed from post-start to running init: Handling starting event init: upstart-udev-bridge goal changed from stop to start init: upstart-udev-bridge state changed from waiting to starting init: Handling starting event init: console-setup state changed from starting to security init: console-setup state changed from security to pre-start init: console-setup state changed from pre-start to spawned init: console-setup main process (327) init: console-setup state changed from spawned to post-start init: console-setup state changed from post-start to running init: Handling starting event init: mountkernfs.sh state changed from starting to security init: mountkernfs.sh state changed from security to pre-start init: mountkernfs.sh state changed from pre-start to spawned init: mountkernfs.sh state changed from spawned to post-start init: mountkernfs.sh state changed from post-start to running init: Handling starting event init: bootmisc.sh state changed from starting to security init: bootmisc.sh state changed from security to pre-start init: bootmisc.sh state changed from pre-start to spawned init: bootmisc.sh state changed from spawned to post-start init: bootmisc.sh state changed from post-start to running init: Handling starting event init: mountdevsubfs.sh state changed from starting to security init: mountdevsubfs.sh state changed from security to pre-start init: mountdevsubfs.sh state changed from pre-start to spawned init: mountdevsubfs.sh state changed from spawned to post-start init: mountdevsubfs.sh state changed from post-start to running init: Handling starting event init: mtab.sh state changed from starting to security init: mtab.sh state changed from security to pre-start init: mtab.sh state changed from pre-start to spawned init: mtab.sh state changed from spawned to post-start init: mtab.sh state changed from post-start to running init: Handling starting event init: mountall-bootclean.sh state changed from starting to security init: mountall-bootclean.sh state changed from security to pre-start init: mountall-bootclean.sh state changed from pre-start to spawned init: mountall-bootclean.sh state changed from spawned to post-start init: mountall-bootclean.sh state changed from post-start to running init: Handling starting event init: procps (virtual-filesystems) state changed from starting to security init: procps (virtual-filesystems) state changed from security to pre-start init: procps (virtual-filesystems) state changed from pre-start to spawned init: procps (virtual-filesystems) main process (330) init: procps (virtual-filesystems) state changed from spawned to post-start init: procps (virtual-filesystems) state changed from post-start to running * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Bridge udev events into upstart[ OK ] * Starting Signal sysvinit that remote filesystems are mounted[ OK ] * Starting device node and kernel event manager[ OK ] * Starting load modules from /etc/modules[ OK ] * Starting cold plug devices[ OK ] * Starting log initial device creation[ OK ] * Stopping load modules from /etc/modules[ OK ] * Starting Uncomplicated firewall[ OK ] * Starting configure network device security[ OK ] * Starting configure network device security[ OK ] * Starting configure network device[ OK ] * Starting configure network device security[ OK ] * Starting Mount network filesystems[ OK ] * Stopping Mount network filesystems[ OK ] * Starting Bridge socket events into upstart[ OK ] cloud-init-nonet[14.60]: static networking is now up * Starting configure network device[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting enable remaining boot-time encrypted block devices[ OK ] * Starting Mount network filesystems[ OK ] * Stopping Mount network filesystems[ OK ] * Starting configure network device[ OK ] Cloud-init v. 0.7.5 running 'init' at Wed, 08 Oct 2014 13:19:32 +0000. Up 16.21 seconds. ci-info: +++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++ ci-info: +--------+-------+-------------+-----------------+-------------------+ ci-info: | Device | Up | Address | Mask | Hw-Address | ci-info: +--------+-------+-------------+-----------------+-------------------+ ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | . | ci-info: | eth1 | False | . | . | 52:54:00:01:70:5f | ci-info: | eth0 | True | 127.0.254.1 | 255.255.255.255 | 52:54:00:67:6c:07 | ci-info: +--------+-------+-------------+-----------------+-------------------+ ci-info: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Route info failed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Oct 8 13:19:34 ubuntu pollinate[715]: ERROR: Network communication failed [6]\n13:19:34.777310 * Hostname was NOT found in DNS cache % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 013:19:34.784153 * Could not resolve host: entropy.ubuntu.com 13:19:34.784258 * Closing connection 0 curl: (6) Could not resolve host: entropy.ubuntu.com 2014-10-08 13:19:34,332 - util.py[WARNING]: Running seed_random () failed Generating public/private rsa key pair. Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 43:0b:0b:ab:7a:2f:71:5b:64:12:bd:f3:47:01:9d:b3 root@myhost The key's randomart image is: +--[ RSA 2048]----+ | . .o . | | . . = | | ..... + | | .o=+ .E | | .+.oS. | | ... . ... | | .o o . | | .o . | |.. o. | +-----------------+ Generating public/private dsa key pair. Your identification has been saved in /etc/ssh/ssh_host_dsa_key. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub. The key fingerprint is: b5:7a:36:19:3e:e0:3d:b5:71:d3:b5:25:45:f3:24:00 root@myhost The key's randomart image is: +--[ DSA 1024]----+ | E....o+| | +o| | . . +| | . . o+| | S o o o..| | . = + + . | | o X . | | o + | | | +-----------------+ Generating public/private ecdsa key pair. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub. The key fingerprint is: 86:14:e8:75:b9:fa:12:f3:de:23:51:d7:ae:d6:1d:59 root@myhost The key's randomart image is: +--[ECDSA 256]---+ | .. . | | . ..o | | . ... . . | | .. .. . . . E| | ..S. . . o| | +.. .o | | = . o ..| | . +.. o . .| | o...o | +-----------------+ * Starting Signal sysvinit that local filesystems are mounted[ OK ] * Starting configure network device security[ OK ] * Stopping Mount filesystems on boot[ OK ] * Starting flush early job output to logs[ OK ] * Stopping Failsafe Boot Delay[ OK ] * Starting D-Bus system message bus[ OK ] * Starting System V initialisation compatibility[ OK ] * Stopping flush early job output to logs[ OK ] * Starting SystemD login management service[ OK ] * Starting configure virtual network devices[ OK ] * Starting system logging daemon[ OK ] * Starting Seed the pseudo random number generator on first boot[ OK ] * Starting Handle applying cloud-config[ OK ] * Starting Bridge file events into upstart[ OK ] * Starting early crypto disks...  [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting Seed the pseudo random number generator on first boot[fail] * Starting AppArmor profiles Cloud-init v. 0.7.5 running 'modules:config' at Wed, 08 Oct 2014 13:19:40 +0000. Up 23.76 seconds.  [ OK ] * Stopping System V initialisation compatibility[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting deferred execution scheduler[ OK ] * Starting regular background program processing daemon[ OK ] * Starting ACPI daemon[ OK ] * Starting save kernel messages[ OK ] * Starting Seed the pseudo random number generator on first boot[ OK ] * Starting OpenSSH server[ OK ] * Stopping CPU interrupts balancing daemon[ OK ] open-vm-tools: not starting as this is not a VMware VM landscape-client is not configured, please run landscape-config. * Stopping save kernel messages[ OK ] * Starting automatic crash report generation[ OK ] * Restoring resolver state...  [ OK ] * Starting Seed the pseudo random number generator on first boot[fail] * Stopping System V runlevel compatibility[ OK ] Generating locales... en_US.UTF-8... up-to-date Generation complete. Ubuntu 14.04.1 LTS myhost ttyS0 myhost login: Cloud-init v. 0.7.5 running 'modules:final' at Wed, 08 Oct 2014 13:19:44 +0000. Up 27.65 seconds. Hi World ci-info: Authorized keys from /home/ubuntu/.ssh/authorized_keys for user ubuntu ci-info: +---------+-------------------+---------+-----------------+ ci-info: | Keytype | Fingerprint (md5) | Options | Comment | ci-info: +---------+-------------------+---------+-----------------+ ci-info: | ssh-rsa | ? | - | smoser@kurhah | ci-info: | ssh-rsa | ? | - | ubuntu@maas-dev | ci-info: +---------+-------------------+---------+-----------------+ ec2: ec2: ############################################################# ec2: -----BEGIN SSH HOST KEY FINGERPRINTS----- ec2: 1024 b5:7a:36:19:3e:e0:3d:b5:71:d3:b5:25:45:f3:24:00 root@myhost (DSA) ec2: 256 86:14:e8:75:b9:fa:12:f3:de:23:51:d7:ae:d6:1d:59 root@myhost (ECDSA) ec2: 2048 43:0b:0b:ab:7a:2f:71:5b:64:12:bd:f3:47:01:9d:b3 root@myhost (RSA) ec2: -----END SSH HOST KEY FINGERPRINTS----- ec2: ############################################################# -----BEGIN SSH HOST KEY KEYS----- ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBEh1/IJbcR33pBzwW3OCwqkXN2R1p286GSZX2x4ANi82jtOKVh++2kktQlL+OFOxfHz8SLv5LzQNN3SdqpYe6o4= root@myhost ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDc3y0W6oOJbz62ny45NtdfFzznf1x1b1qkNbxDgcgl55fM/3U4oH7r4xhWQVobVdUEz2bZyUXYmbmrqmNedzMIpV1CqV7zaCQULiIqPJOo2wgRqIL/3jtLnDgmM5uaI5zDg04myDXngWNgCxdvfoq3pS/Adsyb1jvKoeRDAPKkyTEQR3A7z5KsbELn88MUihYFJWpO6UhN+zAEgIX95b/aCoPSUUTVanG5MhcW12Hh9goDzU9QrWXWcMVmCOiFOs8opR9EZ1yfB+7yW6921Wcpb3kO/8oHlJmi7J6k9LRHoc6l7jN40nD1ISzwUoCw629+SV0Nf5lwL/dmByp4zBQ7 root@myhost -----END SSH HOST KEY KEYS----- Cloud-init v. 0.7.5 finished at Wed, 08 Oct 2014 13:19:44 +0000. Datasource DataSourceMAAS [http://[2001:db8::1:1]:8000/]. Up 27.91 seconds