| 2023-12-06 05:52:42 |
Matus Kosut |
bug |
|
|
added bug |
| 2023-12-06 05:53:08 |
Matus Kosut |
description |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [ ] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L62
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L58
- [ ] This is a doc addition request.
- [ ] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [x] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L62
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L58
- [ ] This is a doc addition request.
- [x] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
|
| 2023-12-06 05:55:58 |
Matus Kosut |
description |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [x] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L62
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L58
- [ ] This is a doc addition request.
- [x] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [ ] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L60
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L58
- [ ] This is a doc addition request.
- [ ] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
|
| 2023-12-06 05:56:09 |
Matus Kosut |
description |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [ ] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L60
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L58
- [ ] This is a doc addition request.
- [ ] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [ ] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L60
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L56
- [ ] This is a doc addition request.
- [ ] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
|
| 2024-02-05 13:00:18 |
Matus Kosut |
description |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [ ] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L60
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L56
- [ ] This is a doc addition request.
- [ ] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes:
- [x] This doc is inaccurate in this way:
There seems to be an important configuration detail missing. By default security groups are not applied, even if enabled. In order to make security groups effective one has to configure enable-ml2-port-security to true (default is false).
juju config neutron-api enable-ml2-port-security=true
The only place that seems to mention that is a testing bundle in a charm-neutron-api-plugin-ovn repository:
https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/stable/yoga/src/tests/bundles/jammy-yoga.yaml#L60
> # NOTE(fnordahl): At current state of upstream Neutron development this is a requirement. Remove once fixed upstream.
We confirmed that this config option is essential on Yoga deployment. Although since the testing bundle mentions it still in Bobcat version I would assume it applies to new releases too. https://opendev.org/openstack/charm-neutron-api-plugin-ovn/src/branch/master/src/tests/bundles/mantic-bobcat.yaml#L56
- [ ] This is a doc addition request.
- [x] I have a fix to the document that I can paste below including example: input and output.
I would suggest updating the Neutron configuration example in section https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html#neutron-networking
ovn-chassis:
bridge-interface-mappings: br-ex:enp1s0
ovn-bridge-mappings: physnet1:br-ex
neutron-api:
neutron-security-groups: true
enable-ml2-port-security: true
flat-network-providers: physnet1
If you have a troubleshooting or support issue, use the following resources:
- The mailing list: https://lists.openstack.org
- IRC: 'openstack' channel on OFTC
-----------------------------------
Release: 0.0.1.dev519 on 2023-12-05 13:43:20
SHA: a0ac5757c5348cd8008465828909f3af662639f5
Source: https://opendev.org/openstack/charm-deployment-guide/src/deploy-guide/source/install-openstack.rst
URL: https://docs.openstack.org/project-deploy-guide/charm-deployment-guide/latest/install-openstack.html |
|
