Add support for USB-LAN adapter

[Victor gonzalez]

Some users contacted BQ because the USB-LAN adapters they own are not recognized by Frieza. They expect the device to automatically config/connect to their LAN network. They want the tablet to behave the same way as a Ubuntu PC does when LAN/Wi-Fi network is connected/disconnected. (I think they should be able to set the network through nmcli)

Product: bq Aquaris E4.5, E5 & M10
FW version: OTA-10.1
HW version: MP

STEPS TO REPRO:
1. Connect DUT>USB-OTG>USB-LAN adapter>Rj45(picture attached)

Actual Result:
USB-LAN adapter is not recognized or it does not auto-connect to home LAN

Expected Result:
Whether Wifi is on or off, once LAN adapter is connected, it should auto-connect to home LAN

Additional info: here is the link provided by one of the users http://de.anker.com/product/A7522012

[Pat McGowan (pat-mcgowan)]

Can someone with one of these adapters grab the syslog when its being connected and the usual nmcli command output

[Patrick West (patrwest)]

I have a usb hub and ethernet combo device that great on my android tablet that appears to use the Realtek RTL8153 chipset, the device is an Aukey CB-H15.

I am happy to provide more information if needed.

nmcli d:
DEVICE TYPE STATE CONNECTION
wlan0 wifi connected home_wifi
ifb0 ifb unmanaged --
ifb1 ifb unmanaged --
ip6tnl0 ip6tnl unmanaged --
sit0 iptunnel unmanaged --
tunl0 iptunnel unmanaged --
lo loopback unmanaged --

[Pat McGowan (pat-mcgowan)]

another ip6 related issue?