2013-08-24 20:24:32 |
Alexander |
bug |
|
|
added bug |
2013-08-24 20:26:46 |
Alexander |
description |
This Steps go to the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2..52 and 2,62
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all older books on SD Card
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps go to the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all older books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
|
2013-08-24 20:27:08 |
Alexander |
description |
This Steps go to the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all older books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all older books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
|
2013-08-24 20:28:01 |
Alexander |
description |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all older books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
|
2013-08-24 20:28:17 |
Alexander |
description |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
|
2013-08-24 20:29:13 |
Alexander |
description |
This Steps shows the Bug:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
|
2013-08-24 20:30:24 |
Alexander |
description |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an Kobo Glo, this bug are not on Glo the Problems gives only with Aura HD!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
|
2013-08-24 20:30:57 |
Alexander |
description |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
|
2013-08-24 20:31:19 |
Alexander |
description |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2,61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2.61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
|
2013-08-24 20:32:17 |
Alexander |
tags |
|
kobo-driver |
|
2013-08-24 20:33:35 |
Alexander |
summary |
Disconnects after second Transfers to Kobo Aura HD |
Disconnects after second Transfer to Kobo Aura HD |
|
2013-08-24 20:34:38 |
Alexander |
summary |
Disconnects after second Transfer to Kobo Aura HD |
Disconnects always after second Transfer to Kobo Aura HD |
|
2013-08-24 20:35:01 |
Alexander |
summary |
Disconnects always after second Transfer to Kobo Aura HD |
Disconnects always after second Transfer on the same session to Kobo Aura HD |
|
2013-08-24 20:36:13 |
Alexander |
summary |
Disconnects always after second Transfer on the same session to Kobo Aura HD |
Disconnect always after second transfer on the same Calibre session to Kobo Aura HD |
|
2013-08-24 20:38:07 |
Alexander |
description |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2.61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on reader
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2.61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on SC Card
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
|
2013-08-24 20:38:16 |
Alexander |
description |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2.61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on SC Card
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
This Steps shows the Bug on the Kobo driver:
Requirment:
=> Kobo Aura HD Firmware 2.81 (the bug is also on Firmware 2.52 and 2.61)
=> A 32GB SD Card in the SD Slot
=> No Books on Reader, all existing books on SD Card
=> Only epubs before or after the transfer on SD Card
1. Connect to Aura HD on calibre and Wait until the Reader Library load finished
2. Send 1 or more books to the SD Card and wait until all process finished
3. Send again 1 or more ebooks to the Reader
At Step 3 the Connection was ever broken with a message "Lost Connection"
The Workarround is => I must disconnect the cable and connect the Reader again. Many Prccesses on calibre makes this Workarround more time expensive.
Info: I have an 2nd reader Kobo Glo, there is no Problem assigned!
Greetings from germany
Alex |
|
2013-08-24 20:48:09 |
Alexander |
attachment added |
|
Kobo Aura HD Error Message.jpg https://bugs.launchpad.net/calibre/+bug/1216410/+attachment/3786403/+files/Kobo%20Aura%20HD%20Error%20Message.jpg |
|
2013-08-25 01:36:24 |
Kovid Goyal |
calibre: status |
New |
Triaged |
|
2013-08-25 01:36:24 |
Kovid Goyal |
calibre: assignee |
|
David Forrester (davidfor) |
|