package tp-smapi-dkms 0.40-7 failed to install/upgrade: tp-smapi kernel module failed to build

[G. Prager]

During update from kernel 3.0.0-19.32 to 3.0.0-19.33 module tp-smapi-dkms failed to build. This happened also before while installing kernel 3.0.0-19.32 first time, see bug report.

uname -a:Linux gp-laptop 3.0.0-19-server #32~lucid1-Ubuntu SMP Mon Apr 9 19:29:04 UTC 2012 x86_64 GNU/Linux

sudo lspci -vvnn:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
 Subsystem: Lenovo Device [17aa:20b3]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
 Subsystem: Lenovo Device [17aa:20b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 44
 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=1M]
 Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
 Region 4: I/O ports at 1800 [size=8]
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0200c Data: 4189
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  Bridge: PM- B3+
 Kernel driver in use: i915
 Kernel modules: intelfb, i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
 Subsystem: Lenovo Device [17aa:20b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  Bridge: PM- B3+

00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
 Subsystem: Lenovo Device [17aa:20de]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 43
 Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=128K]
 Region 1: Memory at f8225000 (32-bit, non-prefetchable) [size=4K]
 Region 2: I/O ports at 1840 [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0200c Data: 41b1
 Kernel driver in use: e1000e
 Kernel modules: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
 Subsystem: Lenovo Device [17aa:20aa]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 4: I/O ports at 1860 [size=32]
 Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
 Subsystem: Lenovo Device [17aa:20aa]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 21
 Region 4: I/O ports at 1880 [size=32]
 Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
 Subsystem: Lenovo Device [17aa:20ab]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 22
 Region 0: Memory at f8426c00 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
 Subsystem: Lenovo Device [17aa:20ac]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 46
 Region 0: Memory at f8220000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0100c Data: 41a1
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [130] Root Complex Link <?>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: f4000000-f5ffffff
 Prefetchable memory behind bridge: 00000000f8500000-00000000f85fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4169
 Capabilities: [90] Subsystem: Lenovo Device [17aa:20ad]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: f6000000-f7ffffff
 Prefetchable memory behind bridge: 00000000f8600000-00000000f86fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 3, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4171
 Capabilities: [90] Subsystem: Lenovo Device [17aa:20ad]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
 Subsystem: Lenovo Device [17aa:20aa]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 18a0 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
 Subsystem: Lenovo Device [17aa:20aa]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 4: I/O ports at 18c0 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
 Subsystem: Lenovo Device [17aa:20ab]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 0: Memory at f8427000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=05, subordinate=08, sec-latency=32
 I/O behind bridge: 00004000-00007fff
 Memory behind bridge: d4000000-d7efffff
 Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Lenovo Device [17aa:20ae]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
 Subsystem: Lenovo Device [17aa:20b6]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
 Subsystem: Lenovo Device [17aa:20a6]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 16
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 18e0 [size=16]
 Kernel driver in use: ata_piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
 Subsystem: Lenovo Device [17aa:20a7]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 42
 Region 0: I/O ports at 1c30 [size=8]
 Region 1: I/O ports at 1c24 [size=4]
 Region 2: I/O ports at 1c28 [size=8]
 Region 3: I/O ports at 1c20 [size=4]
 Region 4: I/O ports at 1c00 [size=32]
 Region 5: Memory at f8426000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
  Address: fee0100c Data: 4179
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [a8] SATA HBA <?>
 Kernel driver in use: ahci
 Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
 Subsystem: Lenovo Device [17aa:20a9]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at f8427400 (32-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 1c40 [size=32]
 Kernel modules: i2c-i801

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4230] (rev 61)
 Subsystem: Intel Corporation Device [8086:1110]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 45
 Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=8K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 4199
 Capabilities: [e0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [140] Device Serial Number b7-f1-1d-ff-ff-e8-13-00
 Kernel driver in use: iwl4965
 Kernel modules: iwl4965

05:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
 Subsystem: Lenovo Device [17aa:20c6]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at d7eff000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=05, secondary=06, subordinate=07, sec-latency=176
 Memory window 0: d8000000-dbfff000 (prefetchable)
 Memory window 1: c0000000-c3fff000
 I/O window 0: 00004000-000040ff
 I/O window 1: 00004400-000044ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket

05:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10)
 Subsystem: Lenovo Device [17aa:20c7]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (500ns min, 1000ns max)
 Interrupt: pin B routed to IRQ 11
 Region 0: Memory at d7efe800 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Kernel modules: firewire-ohci

05:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
 Subsystem: Lenovo Device [17aa:20c8]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at d7efe400 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: sdhci-pci
 Kernel modules: sdhci-pci

output of dmidecode.txt:
# dmidecode 2.9
SMBIOS 2.4 present.
63 structures occupying 2128 bytes.
Table at 0x000E0010.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
 Vendor: LENOVO
 Version: 7NETC2WW (2.22 )
 Release Date: 03/22/2011
 Address: 0xE0000
 Runtime Size: 128 kB
 ROM Size: 4096 kB
 Characteristics:
  PCI is supported
  PC Card (PCMCIA) is supported
  PNP is supported
  BIOS is upgradeable
  BIOS shadowing is allowed
  ESCD support is available
  Boot from CD is supported
  Selectable boot is supported
  BIOS ROM is socketed
  EDD is supported
  ACPI is supported
  USB legacy is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
 BIOS Revision: 2.34
 Firmware Revision: 1.3

Handle 0x0001, DMI type 1, 27 bytes
System Information
 Manufacturer: LENOVO
 Product Name:
 Version: ThinkPad X61
 Serial Number:
 UUID: Not Settable
 Wake-up Type: Power Switch
 SKU Number: Not Specified
 Family: ThinkPad X61

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
 Manufacturer: LENOVO
 Product Name:
 Version: Not Available
 Serial Number: 1ZDTY77Z12K

Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
 Manufacturer: LENOVO
 Type: Notebook
 Lock: Not Present
 Version: Not Available
 Serial Number: Not Available
 Asset Tag: No Asset Information
 Boot-up State: Unknown
 Power Supply State: Unknown
 Thermal State: Unknown
 Security Status: Unknown

Handle 0x0004, DMI type 126, 13 bytes
Inactive

Handle 0x0005, DMI type 126, 13 bytes
Inactive

Handle 0x0006, DMI type 4, 35 bytes
Processor Information
 Socket Designation: None
 Type: Central Processor
 Family: Other
 Manufacturer: GenuineIntel
 ID: FA 06 00 00 FF FB EB BF
 Version: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
 Voltage: 1.3 V
 External Clock: 200 MHz
 Max Speed: 2200 MHz
 Current Speed: 2200 MHz
 Status: Populated, Enabled
 Upgrade: None
 L1 Cache Handle: 0x000A
 L2 Cache Handle: 0x000C
 L3 Cache Handle: Not Provided
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
 Error Detecting Method: None
 Error Correcting Capabilities:
  None
 Supported Interleave: One-way Interleave
 Current Interleave: One-way Interleave
 Maximum Memory Module Size: 4096 MB
 Maximum Total Memory Size: 8192 MB
 Supported Speeds:
  Other
 Supported Memory Types:
  DIMM
  SDRAM
 Memory Module Voltage: 2.9 V
 Associated Memory Slots: 2
  0x0008
  0x0009
 Enabled Error Correcting Capabilities:
  Unknown

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
 Socket Designation: DIMM Slot 1
 Bank Connections: 0 1
 Current Speed: 155 ns
 Type: DIMM SDRAM
 Installed Size: 2048 MB (Double-bank Connection)
 Enabled Size: 2048 MB (Double-bank Connection)
 Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
 Socket Designation: DIMM Slot 2
 Bank Connections: 2 3
 Current Speed: 155 ns
 Type: DIMM SDRAM
 Installed Size: 2048 MB (Double-bank Connection)
 Enabled Size: 2048 MB (Double-bank Connection)
 Error Status: OK

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Internal L1 Cache
 Configuration: Enabled, Socketed, Level 1
 Operational Mode: Write Back
 Location: Internal
 Installed Size: 64 KB
 Maximum Size: 64 KB
 Supported SRAM Types:
  Synchronous
 Installed SRAM Type: Synchronous
 Speed: Unknown
 Error Correction Type: Single-bit ECC
 System Type: Instruction
 Associativity: 8-way Set-associative

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Internal L1 Cache
 Configuration: Enabled, Socketed, Level 1
 Operational Mode: Write Back
 Location: Internal
 Installed Size: 64 KB
 Maximum Size: 64 KB
 Supported SRAM Types:
  Synchronous
 Installed SRAM Type: Synchronous
 Speed: Unknown
 Error Correction Type: Single-bit ECC
 System Type: Data
 Associativity: 8-way Set-associative

Handle 0x000C, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Internal L2 Cache
 Configuration: Enabled, Socketed, Level 2
 Operational Mode: Write Back
 Location: Internal
 Installed Size: 4096 KB
 Maximum Size: 4096 KB
 Supported SRAM Types:
  Burst
 Installed SRAM Type: Burst
 Speed: Unknown
 Error Correction Type: Single-bit ECC
 System Type: Unified
 Associativity: 8-way Set-associative

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: External Monitor
 External Connector Type: DB-15 female
 Port Type: Video Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: Microphone Jack
 External Connector Type: Mini Jack (headphones)
 Port Type: Audio Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: Headphone Jack
 External Connector Type: Mini Jack (headphones)
 Port Type: Audio Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: Modem
 External Connector Type: RJ-11
 Port Type: Modem Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: Ethernet
 External Connector Type: RJ-45
 Port Type: Network Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: USB 1
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: USB 2
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: USB 3
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0015, DMI type 126, 9 bytes
Inactive

Handle 0x0016, DMI type 126, 9 bytes
Inactive

Handle 0x0017, DMI type 126, 9 bytes
Inactive

Handle 0x0018, DMI type 126, 9 bytes
Inactive

Handle 0x0019, DMI type 126, 9 bytes
Inactive

Handle 0x001A, DMI type 126, 9 bytes
Inactive

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Available
 Internal Connector Type: None
 External Reference Designator: IEEE1394
 External Connector Type: IEEE 1394
 Port Type: Firewire (IEEE P1394)

Handle 0x001C, DMI type 9, 13 bytes
System Slot Information
 Designation: CardBus Slot 1
 Type: 32-bit PC Card (PCMCIA)
 Current Usage: Available
 Length: Other
 ID: Adapter 0, Socket 0
 Characteristics:
  5.0 V is provided
  3.3 V is provided
  PC Card-16 is supported
  Cardbus is supported
  Zoom Video is supported
  Modem ring resume is supported
  PME signal is supported
  Hot-plug devices are supported

Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
 Designation: Media Card Slot 1
 Type: Other
 Current Usage: Available
 Length: Other
 Characteristics:
  Hot-plug devices are supported

Handle 0x001E, DMI type 10, 6 bytes
On Board Device Information
 Type: Other
 Status: Disabled
 Description: IBM Embedded Security hardware

Handle 0x001F, DMI type 11, 5 bytes
OEM Strings
 String 1: IBM ThinkPad Embedded Controller -[7MHT25WW-1.03 ]-

Handle 0x0020, DMI type 13, 22 bytes
BIOS Language Information
 Installable Languages: 1
  enUS
 Currently Installed Language: enUS

Handle 0x0021, DMI type 15, 25 bytes
System Event Log
 Area Length: 0 bytes
 Header Start Offset: 0x0000
 Header Length: 16 bytes
 Data Start Offset: 0x0010
 Access Method: General-purpose non-volatile data functions
 Access Address: 0x0000
 Status: Valid, Not Full
 Change Token: 0x000000F8
 Header Format: Type 1
 Supported Log Type Descriptors: 1
 Descriptor 1: POST error
 Data Format 1: POST results bitmap

Handle 0x0022, DMI type 16, 15 bytes
Physical Memory Array
 Location: System Board Or Motherboard
 Use: System Memory
 Error Correction Type: None
 Maximum Capacity: 4 GB
 Error Information Handle: Not Provided
 Number Of Devices: 2

Handle 0x0023, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0022
 Error Information Handle: 0xFF01
 Total Width: 64 bits
 Data Width: 64 bits
 Size: 2048 MB
 Form Factor: SODIMM
 Set: None
 Locator: DIMM 1
 Bank Locator: Bank 0/1
 Type: DDR2
 Type Detail: Synchronous
 Speed: 667 MHz (1.5 ns)
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x0024, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0022
 Error Information Handle: 0xFF01
 Total Width: 64 bits
 Data Width: 64 bits
 Size: 2048 MB
 Form Factor: SODIMM
 Set: None
 Locator: DIMM 2
 Bank Locator: Bank 2/3
 Type: DDR2
 Type Detail: Synchronous
 Speed: 667 MHz (1.5 ns)
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x0025, DMI type 18, 23 bytes
32-bit Memory Error Information
 Type: OK
 Granularity: Unknown
 Operation: Unknown
 Vendor Syndrome: Unknown
 Memory Array Address: Unknown
 Device Address: Unknown
 Resolution: Unknown

Handle 0x0026, DMI type 19, 15 bytes
Memory Array Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x000FFFFFFFF
 Range Size: 4 GB
 Physical Array Handle: 0x0022
 Partition Width: 0

Handle 0x0027, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x0007FFFFFFF
 Range Size: 2 GB
 Physical Device Handle: 0x0023
 Memory Array Mapped Address Handle: 0x0026
 Partition Row Position: 1

Handle 0x0028, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00080000000
 Ending Address: 0x000FFFFFFFF
 Range Size: 2 GB
 Physical Device Handle: 0x0024
 Memory Array Mapped Address Handle: 0x0026
 Partition Row Position: 1

Handle 0x0029, DMI type 21, 7 bytes
Built-in Pointing Device
 Type: Track Point
 Interface: PS/2
 Buttons: 3

Handle 0x002A, DMI type 22, 26 bytes
Portable Battery
 Location: Rear
 Manufacturer: SANYO
 Name: 42T4632
 Design Capacity: 74880 mWh
 Design Voltage: 14400 mV
 SBDS Version: 03.01
 Maximum Error: Unknown
 SBDS Serial Number: 0923
 SBDS Manufacture Date: 2008-10-19
 SBDS Chemistry: LION
 OEM-specific Information: 0x00000000

Handle 0x002B, DMI type 126, 26 bytes
Inactive

Handle 0x002C, DMI type 24, 5 bytes
Hardware Security
 Power-On Password Status: Enabled
 Keyboard Password Status: Disabled
 Administrator Password Status: Disabled
 Front Panel Reset Status: Unknown

Handle 0x002D, DMI type 32, 11 bytes
System Boot Information
 Status: No errors detected

Handle 0x002E, DMI type 131, 17 bytes
OEM-specific Type
 Header and Data:
  83 11 2E 00 01 02 03 FF FF 1F 00 00 00 00 00 02
  00
 Strings:
  BOOTINF 20h
  BOOTDEV 21h
  KEYPTRS 23h

Handle 0x002F, DMI type 131, 22 bytes
OEM-specific Type
 Header and Data:
  83 16 2F 00 01 02 00 00 00 00 00 00 00 00 00 00
  00 00 00 00 00 01
 Strings:
  TVT-Enablement

Handle 0x0030, DMI type 132, 7 bytes
OEM-specific Type
 Header and Data:
  84 07 30 00 02 D9 36

Handle 0x0031, DMI type 133, 5 bytes
OEM-specific Type
 Header and Data:
  85 05 31 00 01
 Strings:
  KHOIHGIUCCHHII

Handle 0x0032, DMI type 126, 13 bytes
Inactive

Handle 0x0033, DMI type 134, 16 bytes
OEM-specific Type
 Header and Data:
  86 10 33 00 00 41 54 4D 4C 01 01 00 00 00 01 02
 Strings:
  TPM INFO
  System Reserved

Handle 0x0034, DMI type 135, 13 bytes
OEM-specific Type
 Header and Data:
  87 0D 34 00 54 50 07 00 01 00 00 00 00

Handle 0x0035, DMI type 135, 18 bytes
OEM-specific Type
 Header and Data:
  87 12 35 00 54 50 07 01 01 B2 0D 00 00 00 00 00
  00 00

Handle 0x0036, DMI type 135, 35 bytes
OEM-specific Type
 Header and Data:
  87 23 36 00 54 50 07 02 42 41 59 20 49 2F 4F 20
  01 00 02 00 00 0A 00 30 1C 26 1C 02 00 0E 00 F0
  01 F6 03

Handle 0x0037, DMI type 135, 26 bytes
OEM-specific Type
 Header and Data:
  87 1A 37 00 54 50 07 04 01 04 01 01 02 00 02 02
  02 00 03 01 02 00 04 01 02 00

Handle 0x0038, DMI type 136, 6 bytes
OEM-specific Type
 Header and Data:
  88 06 38 00 5A 5A

Handle 0x0039, DMI type 137, 28 bytes
OEM-specific Type
 Header and Data:
  89 1C 39 00 0C 02 00 01 00 00 00 01 50 57 4D 53
  20 49 6E 66 6F 72 6D 61 74 69 6F 6E

Handle 0x003A, DMI type 138, 40 bytes
OEM-specific Type
 Header and Data:
  8A 28 3A 00 14 01 02 01 40 02 01 40 02 01 40 02
  01 40 01 40 42 49 4F 53 20 50 61 73 73 77 6F 72
  64 20 46 6F 72 6D 61 74

Handle 0x003B, DMI type 139, 37 bytes
OEM-specific Type
 Header and Data:
  8B 25 3B 00 11 01 0A 00 00 00 00 00 00 00 00 00
  00 50 57 4D 53 20 4B 65 79 20 49 6E 66 6F 72 6D
  61 74 69 6F 6E

Handle 0x003C, DMI type 129, 8 bytes
OEM-specific Type
 Header and Data:
  81 08 3C 00 01 01 02 00
 Strings:
  Intel_ASF
  Intel_ASF_001

Handle 0x003D, DMI type 130, 20 bytes
OEM-specific Type
 Header and Data:
  82 14 3D 00 24 41 4D 54 01 00 00 00 00 A5 00 00
  00 00 00 00

Handle 0x003E, DMI type 127, 4 bytes
End Of Table

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: tp-smapi-dkms 0.40-7
ProcVersionSignature: Ubuntu 3.0.0-19.32~lucid1-server 3.0.27
Uname: Linux 3.0.0-19-server x86_64
Architecture: amd64
Date: Thu Apr 26 11:11:46 2012
ErrorMessage: tp-smapi kernel module failed to build
InstallationMedia: Ubuntu 10.04.2 LTS "Lucid Lynx" - Release amd64 (20110211.3)
PackageArchitecture: all
PackageVersion: 0.40-7
SourcePackage: tp-smapi
Title: package tp-smapi-dkms 0.40-7 failed to install/upgrade: tp-smapi kernel module failed to build

[Rolf Leggewie (r0lf)]

Thank you for your report. Has this issue been resolved in the meantime or is it still present? How about releases after lucid such as precise or saucy?

[Rolf Leggewie (r0lf)]

did version 0.41-1 fix this for you?

[Rolf Leggewie (r0lf)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!