U-Boot 2011.06-01275-gd6186aa (Apr 03 2012 - 01:25:16) for ORIGEN CPU: S5PC210@1000MHz Board: ORIGEN DRAM: 1 GiB WARNING: Caches not enabled MMC: SAMSUNG SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 reading boot.scr 397 bytes read Running bootscript from mmc0:2 ... ## Executing script at 42000000 reading uImage 3723944 bytes read reading uInitrd 203298 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux-3.3.0-rc6-00005-g5262ad5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3723880 Bytes = 3.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 203234 Bytes = 198.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. <6>Booting Linux on physical CPU 0 <5>Linux version 3.3.0-rc6-00005-g5262ad5 (jenkins-build@ip-10-224-45-121) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 SMP PREEMPT Tue Apr 3 02:09:05 UTC 2012 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ORIGEN <5>Truncating RAM at 60000000-6fffffff to -6f7fffff (vmalloc region overlap). <5>Ignoring RAM at 70000000-7fffffff (vmalloc region overlap). <6>cma: CMA: reserved 64 MiB at 44000000 <6>cma: CMA: reserved 64 MiB at 54000000 <6>cma: CMA: reserved 64 MiB at 68000000 Memory policy: ECC disabled, Data cache writealloc CPU EXYNOS4210 (id 0x43210011) <7>exynos4_init_clocks: initializing clocks <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics <3>s3c_register_clksrc: clock armclk has no registers set <7>exynos4_setup_clocks: registering clocks <7>exynos4_setup_clocks: xtal is 24000000 <6>EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000<6>EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 <6>sclk_pwm: source is ext_xtal (0), rate is 24000000 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_csis: source is xusbxti (1), rate is 0 <6>sclk_cam0: source is xusbxti (1), rate is 0 <6>sclk_cam1: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimc: source is xusbxti (1), rate is 0 <6>sclk_fimd: source is xusbxti (1), rate is 0 <6>sclk_fimg2d: source is mout_g2d0 (0), rate is 0 <6>sclk_mfc: source is mout_mfc0 (0), rate is 100000000 <6>sclk_pwi: source is xusbxti (1), rate is 0 <7>On node 0 totalpages: 194560 <7> Normal zone: 1520 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 193040 pages, LIFO batch:31 <6>PERCPU: Embedded 8 pages/cpu @c0f07000 s11136 r8192 d13440 u32768 <7>pcpu-alloc: s11136 r8192 d13440 u32768 alloc=8*4096 <7>pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040 <5>Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2 <6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 760MB = 760MB total <5>Memory: 564756k/564756k available, 213484k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc06f846c (7106 kB) .init : 0xc06f9000 - 0xc0743b80 ( 299 kB) .data : 0xc0744000 - 0xc07adeb0 ( 424 kB) .bss : 0xc07aded4 - 0xc08fcda8 (1340 kB) <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>Preemptible hierarchical RCU implementation. <6>NR_IRQS:421 <6>Console: colour dummy device 80x30 <6>console [tty0] enabled <6>Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736) <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: ok <6>ftrace: allocating 17995 entries in 53 pages <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 <6>hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available <6>Setting up static identity map for 0x404f4f50 - 0x404f4fa8 <6>L310 cache controller enabled <6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B CPU1: Booted secondary processor <6>CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 <2>CPU1: Unknown IPI message 0x1 <6>Brought up 2 CPUs <6>SMP: Total of 2 processors activated (3984.58 BogoMIPS). <6>gpiochip_add: registered GPIOs 0 to 7 on device: GPA0 <6>gpiochip_add: registered GPIOs 9 to 14 on device: GPA1 <6>gpiochip_add: registered GPIOs 16 to 23 on device: GPB <6>gpiochip_add: registered GPIOs 25 to 29 on device: GPC0 <6>gpiochip_add: registered GPIOs 31 to 35 on device: GPC1 <6>gpiochip_add: registered GPIOs 37 to 40 on device: GPD0 <6>gpiochip_add: registered GPIOs 42 to 45 on device: GPD1 <6>gpiochip_add: registered GPIOs 47 to 51 on device: GPE0 <6>gpiochip_add: registered GPIOs 53 to 60 on device: GPE1 <6>gpiochip_add: registered GPIOs 62 to 67 on device: GPE2 <6>gpiochip_add: registered GPIOs 69 to 76 on device: GPE3 <6>gpiochip_add: registered GPIOs 78 to 85 on device: GPE4 <6>gpiochip_add: registered GPIOs 87 to 94 on device: GPF0 <6>gpiochip_add: registered GPIOs 96 to 103 on device: GPF1 <6>gpiochip_add: registered GPIOs 105 to 112 on device: GPF2 <6>gpiochip_add: registered GPIOs 114 to 119 on device: GPF3 <6>gpiochip_add: registered GPIOs 121 to 128 on device: GPJ0 <6>gpiochip_add: registered GPIOs 130 to 134 on device: GPJ1 <6>gpiochip_add: registered GPIOs 136 to 142 on device: GPK0 <6>gpiochip_add: registered GPIOs 144 to 150 on device: GPK1 <6>gpiochip_add: registered GPIOs 152 to 158 on device: GPK2 <6>gpiochip_add: registered GPIOs 160 to 166 on device: GPK3 <6>gpiochip_add: registered GPIOs 168 to 175 on device: GPL0 <6>gpiochip_add: registered GPIOs 177 to 179 on device: GPL1 <6>gpiochip_add: registered GPIOs 181 to 188 on device: GPL2 <6>gpiochip_add: registered GPIOs 226 to 231 on device: GPY0 <6>gpiochip_add: registered GPIOs 233 to 236 on device: GPY1 <6>gpiochip_add: registered GPIOs 238 to 243 on device: GPY2 <6>gpiochip_add: registered GPIOs 245 to 252 on device: GPY3 <6>gpiochip_add: registered GPIOs 254 to 261 on device: GPY4 <6>gpiochip_add: registered GPIOs 263 to 270 on device: GPY5 <6>gpiochip_add: registered GPIOs 272 to 279 on device: GPY6 <6>gpiochip_add: registered GPIOs 190 to 197 on device: GPX0 <6>gpiochip_add: registered GPIOs 199 to 206 on device: GPX1 <6>gpiochip_add: registered GPIOs 208 to 215 on device: GPX2 <6>gpiochip_add: registered GPIOs 217 to 224 on device: GPX3 <6>gpiochip_add: registered GPIOs 281 to 287 on device: GPZ <6>print_constraints: dummy: <6>NET: Registered protocol family 16 <6>DMA: preallocated 256 KiB pool for atomic coherent allocations <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>hw-breakpoint: maximum watchpoint size is 4 bytes. S3C Power Management, Copyright 2004 Simtec Electronics <6>EXYNOS4210 PMU Initialize <6>EXYNOS: Initializing architecture <6>s3c24xx-pwm s3c24xx-pwm.0: tin at 50000000, tdiv at 50000000, tin=divclk, base 0 <6>bio: create slab at 0 <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>s3c-i2c s3c2440-i2c.0: slave address 0x10 <6>s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz <6>print_constraints: VDD_ABB_3.3V: 3300 mV <6>print_constraints: VDD_ALIVE_1.1V: 1100 mV <6>print_constraints: VMIPI_1.1V: 1100 mV <6>print_constraints: VDD_RTC_1.8V: 1800 mV <6>print_constraints: VMIPI_1.8V: 1800 mV <6>print_constraints: VDD_AUD_1.8V: 1800 mV <6>print_constraints: VADC_3.3V: 3300 mV <6>print_constraints: DVDD_SWB_2.8V: 2800 mV <6>print_constraints: VDD_PLL_1.1V: 1100 mV <6>print_constraints: VDD_AUD_3V: 3000 mV <6>print_constraints: AVDD18_SWB_1.8V: 1800 mV <6>print_constraints: VDD_SWB_3.3V: 3300 mV <6>print_constraints: VDD_MIF_1.2V: 1200 mV <6>print_constraints: VDD_ARM_1.2V: 950 <--> 1350 mV at 1350 mV <6>print_constraints: VDD_INT_1.1V: 900 <--> 1100 mV at 1100 mV <6>print_constraints: VDD_G3D_1.1V: 900 <--> 1100 mV at 1100 mV <6>print_constraints: VDDQ_M1M2_1.2V: 1200 mV <6>print_constraints: VDD_LCD_3.3V: 750 <--> 3900 mV at 2000 mV <6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter <6>s3c-i2c s3c2440-i2c.1: slave address 0x10 <6>s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz <6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter <6>s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10 <6>s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz <6>s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter <6>Advanced Linux Sound Architecture Driver Version 1.0.24. <6>Bluetooth: Core ver 2.16 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: SCO socket layer initialized <6>cfg80211: Calling CRDA to update world regulatory domain <6>Switching to clocksource mct-frc <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1572864 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>UDP hash table entries: 512 (order: 3, 32768 bytes) <6>UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) <6>NET: Registered protocol family 1 <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 196K <6>ROMFS MTD (C) 2007 Red Hat, Inc. <6>msgmni has been set to 1487 <6>io scheduler noop registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>start plist test <6>end plist test <6>Console: switching to colour frame buffer device 128x37 <6>s3c-fb exynos4-fb.0: window 0: fb <4>_regulator_get: dma-pl330.0 supply vcore not found, using dummy regulator <6>dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056 <6>dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <4>_regulator_get: dma-pl330.1 supply vcore not found, using dummy regulator <6>dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056 <6>dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10 <6>exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10 <6>exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10 [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.3.0-rc6-00005-g5262ad5 (jenkins-build@ip-10-224-45-121) (gcc version 4.6.3 (Linaro GCC 4.6-2012.03) ) #1 SMP PREEMPT Tue Apr 3 02:09:05 UTC 2012 [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: ORIGEN [ 0.000000] Truncating RAM at 60000000-6fffffff to -6f7fffff (vmalloc region overlap). [ 0.000000] Ignoring RAM at 70000000-7fffffff (vmalloc region overlap). [ 0.000000] cma: CMA: reserved 64 MiB at 44000000 [ 0.000000] cma: CMA: reserved 64 MiB at 54000000 [ 0.000000] cma: CMA: reserved 64 MiB at 68000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] CPU EXYNOS4210 (id 0x43210011) [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] s3c_register_clksrc: clock armclk has no registers set [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000 [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000 [ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333 [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0 [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0 [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 0 [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimd: source is xusbxti (1), rate is 0 [ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 0 [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 100000000 [ 0.000000] sclk_pwi: source is xusbxti (1), rate is 0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0f07000 s11136 r8192 d13440 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040 [ 0.000000] Kernel command line: console=tty0 console=ttySAC2,115200n8 rootwait ro init=/init androidboot.console=ttySAC2 console=ttySAC2 root=/dev/mmcblk0p2 [ 0.000000] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 760MB = 760MB total [ 0.000000] Memory: 564756k/564756k available, 213484k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc06f846c (7106 kB) [ 0.000000] .init : 0xc06f9000 - 0xc0743b80 ( 299 kB) [ 0.000000] .data : 0xc0744000 - 0xc07adeb0 ( 424 kB) [ 0.000000] .bss : 0xc07aded4 - 0xc08fcda8 (1340 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:421 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.005000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736) [ 0.050000] pid_max: default: 32768 minimum: 301 [ 0.055000] Mount-cache hash table entries: 512 [ 0.060000] CPU: Testing write buffer coherency: ok [ 0.060000] ftrace: allocating 17995 entries in 53 pages [ 0.090000] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 [ 0.095000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.100000] Setting up static identity map for 0x404f4f50 - 0x404f4fa8 [ 0.105000] L310 cache controller enabled [ 0.110000] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B [ 0.165000] CPU1: Booted secondary processor [ 0.185000] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 [ 0.185000] CPU1: Unknown IPI message 0x1 [ 0.185000] Brought up 2 CPUs [ 0.190000] SMP: Total of 2 processors activated (3984.58 BogoMIPS). [ 0.205000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0 [ 0.210000] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1 [ 0.215000] gpiochip_add: registered GPIOs 16 to 23 on device: GPB [ 0.220000] gpiochip_add: registered GPIOs 25 to 29 on device: GPC0 [ 0.225000] gpiochip_add: registered GPIOs 31 to 35 on device: GPC1 [ 0.230000] gpiochip_add: registered GPIOs 37 to 40 on device: GPD0 [ 0.235000] gpiochip_add: registered GPIOs 42 to 45 on device: GPD1 [ 0.240000] gpiochip_add: registered GPIOs 47 to 51 on device: GPE0 [ 0.245000] gpiochip_add: registered GPIOs 53 to 60 on device: GPE1 [ 0.250000] gpiochip_add: registered GPIOs 62 to 67 on device: GPE2 [ 0.255000] gpiochip_add: registered GPIOs 69 to 76 on device: GPE3 [ 0.260000] gpiochip_add: registered GPIOs 78 to 85 on device: GPE4 [ 0.265000] gpiochip_add: registered GPIOs 87 to 94 on device: GPF0 [ 0.270000] gpiochip_add: registered GPIOs 96 to 103 on device: GPF1 [ 0.275000] gpiochip_add: registered GPIOs 105 to 112 on device: GPF2 [ 0.280000] gpiochip_add: registered GPIOs 114 to 119 on device: GPF3 [ 0.285000] gpiochip_add: registered GPIOs 121 to 128 on device: GPJ0 [ 0.290000] gpiochip_add: registered GPIOs 130 to 134 on device: GPJ1 [ 0.295000] gpiochip_add: registered GPIOs 136 to 142 on device: GPK0 [ 0.300000] gpiochip_add: registered GPIOs 144 to 150 on device: GPK1 [ 0.305000] gpiochip_add: registered GPIOs 152 to 158 on device: GPK2 [ 0.310000] gpiochip_add: registered GPIOs 160 to 166 on device: GPK3 [ 0.315000] gpiochip_add: registered GPIOs 168 to 175 on device: GPL0 [ 0.320000] gpiochip_add: registered GPIOs 177 to 179 on device: GPL1 [ 0.325000] gpiochip_add: registered GPIOs 181 to 188 on device: GPL2 [ 0.330000] gpiochip_add: registered GPIOs 226 to 231 on device: GPY0 [ 0.335000] gpiochip_add: registered GPIOs 233 to 236 on device: GPY1 [ 0.340000] gpiochip_add: registered GPIOs 238 to 243 on device: GPY2 [ 0.345000] gpiochip_add: registered GPIOs 245 to 252 on device: GPY3 [ 0.350000] gpiochip_add: registered GPIOs 254 to 261 on device: GPY4 [ 0.355000] gpiochip_add: registered GPIOs 263 to 270 on device: GPY5 [ 0.360000] gpiochip_add: registered GPIOs 272 to 279 on device: GPY6 [ 0.365000] gpiochip_add: registered GPIOs 190 to 197 on device: GPX0 [ 0.370000] gpiochip_add: registered GPIOs 199 to 206 on device: GPX1 [ 0.375000] gpiochip_add: registered GPIOs 208 to 215 on device: GPX2 [ 0.380000] gpiochip_add: registered GPIOs 217 to 224 on device: GPX3 [ 0.385000] gpiochip_add: registered GPIOs 281 to 287 on device: GPZ [ 0.390000] print_constraints: dummy: [ 0.400000] NET: Registered protocol family 16 [ 0.425000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.440000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.445000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.450000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.455000] EXYNOS4210 PMU Initialize [ 0.460000] EXYNOS: Initializing architecture [ 0.460000] s3c24xx-pwm s3c24xx-pwm.0: tin at 50000000, tdiv at 50000000, tin=divclk, base 0 [ 0.485000] bio: create slab at 0 [ 0.485000] SCSI subsystem initialized [ 0.490000] usbcore: registered new interface driver usbfs [ 0.495000] usbcore: registered new interface driver hub [ 0.500000] usbcore: registered new device driver usb [ 0.505000] s3c-i2c s3c2440-i2c.0: slave address 0x10 [ 0.505000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz [ 0.635000] print_constraints: VDD_ABB_3.3V: 3300 mV [ 0.640000] print_constraints: VDD_ALIVE_1.1V: 1100 mV [ 0.645000] print_constraints: VMIPI_1.1V: 1100 mV [ 0.655000] print_constraints: VDD_RTC_1.8V: 1800 mV [ 0.660000] print_constraints: VMIPI_1.8V: 1800 mV [ 0.665000] print_constraints: VDD_AUD_1.8V: 1800 mV [ 0.670000] print_constraints: VADC_3.3V: 3300 mV [ 0.675000] print_constraints: DVDD_SWB_2.8V: 2800 mV [ 0.685000] print_constraints: VDD_PLL_1.1V: 1100 mV [ 0.690000] print_constraints: VDD_AUD_3V: 3000 mV [ 0.695000] print_constraints: AVDD18_SWB_1.8V: 1800 mV [ 0.705000] print_constraints: VDD_SWB_3.3V: 3300 mV [ 0.710000] print_constraints: VDD_MIF_1.2V: 1200 mV [ 0.715000] print_constraints: VDD_ARM_1.2V: 950 <--> 1350 mV at 1350 mV [ 0.725000] print_constraints: VDD_INT_1.1V: 900 <--> 1100 mV at 1100 mV [ 0.730000] print_constraints: VDD_G3D_1.1V: 900 <--> 1100 mV at 1100 mV [ 0.740000] print_constraints: VDDQ_M1M2_1.2V: 1200 mV [ 0.745000] print_constraints: VDD_LCD_3.3V: 750 <--> 3900 mV at 2000 mV [ 0.750000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ 0.755000] s3c-i2c s3c2440-i2c.1: slave address 0x10 [ 0.760000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz [ 0.765000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [ 0.770000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10 [ 0.775000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz [ 0.780000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter [ 0.785000] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.790000] Bluetooth: Core ver 2.16 [ 0.795000] NET: Registered protocol family 31 [ 0.795000] Bluetooth: HCI device and connection manager initialized [ 0.800000] Bluetooth: HCI socket layer initialized [ 0.805000] Bluetooth: L2CAP socket layer initialized [ 0.810000] Bluetooth: SCO socket layer initialized [ 0.815000] cfg80211: Calling CRDA to update world regulatory domain [ 0.820000] Switching to clocksource mct-frc [ 0.845000] NET: Registered protocol family 2 [ 0.855000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.855000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.860000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes) [ 0.870000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.875000] TCP reno registered [ 0.875000] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.880000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.890000] NET: Registered protocol family 1 [ 0.890000] Trying to unpack rootfs image as initramfs... [ 0.905000] Freeing initrd memory: 196K [ 0.925000] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.930000] msgmni has been set to 1487 [ 0.930000] io scheduler noop registered [ 0.935000] io scheduler deadline registered [ 0.940000] io scheduler cfq registered (default) [ 0.940000] start plist test [ 0.950000] end plist test [ 0.970000] Console: switching to colour frame buffer device 128x37 [ 0.980000] s3c-fb exynos4-fb.0: window 0: fb [ 0.980000] _regulator_get: dma-pl330.0 supply vcore not found, using dummy regulator [ 1.000000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056 [ 1.010000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.015000] _regulator_get: dma-pl330.1 supply vcore not found, using dummy regulator [ 1.030000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056 [ 1.040000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.135000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.145000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10 [ 1.150000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10 [ 1.160000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10 <6>console [ttySAC2] enabled [ 2.245000] console [ttySAC2] enabled <6>exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10 [ 2.255000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10 <6>[drm] Initialized drm 1.1.0 20060810 [ 2.270000] [drm] Initialized drm 1.1.0 20060810 Mali: [ 2.280000] Mali: Mali device driver loaded Mali device driver loaded UMP: [ U2.290000] UMP: MP device driver loaded UMP device driver loaded <6>brd: module loaded [ 2.305000] brd: module loaded <6>loop: module loaded [ 2.320000] loop: module loaded <6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 2.325000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver <6>usbcore: registered new interface driver pegasus [ 2.340000] usbcore: registered new interface driver pegasus <6>usbcore: registered new interface driver asix [ 2.350000] usbcore: registered new interface driver asix <6>usbcore: registered new interface driver cdc_ether [ 2.360000] usbcore: registered new interface driver cdc_ether <6>usbcore: registered new interface driver dm9601 [ 2.375000] usbcore: registered new interface driver dm9601 <6>usbcore: registered new interface driver net1080 [ 2.385000] usbcore: registered new interface driver net1080 <6>usbcore: registered new interface driver cdc_subset [ 2.395000] usbcore: registered new interface driver cdc_subset <6>usbcore: registered new interface driver zaurus [ 2.405000] usbcore: registered new interface driver zaurus <6>usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.415000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver <6>usbcore: registered new interface driver cdc_ncm [ 2.430000] usbcore: registered new interface driver cdc_ncm <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.445000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>s5p-ehci s5p-ehci: S5P EHCI Host Controller [ 2.455000] s5p-ehci s5p-ehci: S5P EHCI Host Controller <6>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 [ 2.465000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 <6>s5p-ehci s5p-ehci: irq 102, io mem 0x12580000 [ 2.480000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000 <6>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 [ 2.500000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 <6>hub 1-0:1.0: USB hub found [ 2.510000] hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 3 ports detected [ 2.515000] hub 1-0:1.0: 3 ports detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.525000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller [ 2.535000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller <6>exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2 [ 2.545000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2 <6>exynos-ohci exynos-ohci: irq 102, io mem 0x12590000 [ 2.560000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000 <6>hub 2-0:1.0: USB hub found [ 2.630000] hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 3 ports detected [ 2.640000] hub 2-0:1.0: 3 ports detected <6>Initializing USB Mass Storage driver... [ 2.645000] Initializing USB Mass Storage driver... <6>usbcore: registered new interface driver usb-storage [ 2.655000] usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. [ 2.665000] USB Mass Storage support registered. <6>s3c-hsotg s3c-hsotg: regs f0080000, irq 103 [ 2.675000] s3c-hsotg s3c-hsotg: regs f0080000, irq 103 <3>s3c_hsotg_phy_enable: pdev 0xc076d820 [ 2.685000] s3c_hsotg_phy_enable: pdev 0xc076d820 <4>_regulator_get: s3c-hsotg supply vusb_d not found, using dummy regulator [ 2.695000] _regulator_get: s3c-hsotg supply vusb_d not found, using dummy regulator <4>_regulator_get: s3c-hsotg supply vusb_a not found, using dummy regulator [ 2.710000] _regulator_get: s3c-hsotg supply vusb_a not found, using dummy regulator <6>s3c-hsotg s3c-hsotg: EPs:15 [ 2.725000] s3c-hsotg s3c-hsotg: EPs:15 <6>s3c-hsotg s3c-hsotg: dedicated fifos [ 2.730000] s3c-hsotg s3c-hsotg: dedicated fifos <6> gadget: Mass Storage Function, version: 2009/09/11 [ 2.745000] gadget: Mass Storage Function, version: 2009/09/11 <6> gadget: Number of LUNs=1 [ 2.755000] gadget: Number of LUNs=1 <6> lun0: LUN: removable file: (no medium) [ 2.760000] lun0: LUN: removable file: (no medium) <6> gadget: android_usb ready [ 2.770000] gadget: android_usb ready <3>s3c_hsotg_phy_enable: pdev 0xc076d820 [ 2.775000] s3c_hsotg_phy_enable: pdev 0xc076d820 <6>s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst [ 2.785000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst <6>s3c-hsotg s3c-hsotg: bound driver android_usb [ 2.800000] s3c-hsotg s3c-hsotg: bound driver android_usb <6>mousedev: PS/2 mouse device common for all mice [ 2.810000] mousedev: PS/2 mouse device common for all mice <6>input: unidisplay_ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0041/input/input0 [ 2.820000] input: unidisplay_ts as /devices/platform/s3c2440-i2c.0/i2c-0/0-0041/input/input0 <6>Unidisplay touch driver registered successfully [ 2.840000] Unidisplay touch driver registered successfully <6>s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling [ 2.850000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling <6>s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0 [ 2.860000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0 <4>s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it [ 2.870000] s3c-rtc s3c64xx-rtc: warning: invalid RTC value so initializing it <6>Linux media interface: v0.10 [ 2.885000] Linux media interface: v0.10 <6>lirc_dev: IR Remote Control driver registered, major 251 [ 2.895000] lirc_dev: IR Remote Control driver registered, major 251 <6>IR NEC protocol handler initialized [ 2.905000] IR NEC protocol handler initialized <6>IR RC5(x) protocol handler initialized [ 2.915000] IR RC5(x) protocol handler initialized <6>IR RC6 protocol handler initialized [ 2.925000] IR RC6 protocol handler initialized <6>IR JVC protocol handler initialized [ 2.935000] IR JVC protocol handler initialized <6>IR Sony protocol handler initialized [ 2.940000] IR Sony protocol handler initialized <6>IR RC5 (streamzap) protocol handler initialized [ 2.950000] IR RC5 (streamzap) protocol handler initialized <6>IR SANYO protocol handler initialized [ 2.960000] IR SANYO protocol handler initialized <6>IR MCE Keyboard/mouse protocol handler initialized [ 2.970000] IR MCE Keyboard/mouse protocol handler initialized <6>IR LIRC bridge handler initialized [ 2.980000] IR LIRC bridge handler initialized <6>Linux video capture interface: v2.00 [ 2.990000] Linux video capture interface: v2.00 <6>s5p-fimc-md: Registered exynos4-fimc.0.m2m as /dev/video0 [ 3.005000] s5p-fimc-md: Registered exynos4-fimc.0.m2m as /dev/video0 <6>s5p-fimc-md: Registered exynos4-fimc.0.capture as /dev/video1 [ 3.020000] s5p-fimc-md: Registered exynos4-fimc.0.capture as /dev/video1 <6>s5p-fimc-md: Registered exynos4-fimc.1.m2m as /dev/video2 [ 3.030000] s5p-fimc-md: Registered exynos4-fimc.1.m2m as /dev/video2 <6>s5p-fimc-md: Registered exynos4-fimc.1.capture as /dev/video3 [ 3.040000] s5p-fimc-md: Registered exynos4-fimc.1.capture as /dev/video3 <6>s5p-fimc-md: Registered exynos4-fimc.2.m2m as /dev/video4 [ 3.055000] s5p-fimc-md: Registered exynos4-fimc.2.m2m as /dev/video4 <6>s5p-fimc-md: Registered exynos4-fimc.2.capture as /dev/video5 [ 3.065000] s5p-fimc-md: Registered exynos4-fimc.2.capture as /dev/video5 <6>s5p-fimc-md: Registered exynos4-fimc.3.m2m as /dev/video6 [ 3.080000] s5p-fimc-md: Registered exynos4-fimc.3.m2m as /dev/video6 <6>s5p-fimc-md: Registered exynos4-fimc.3.capture as /dev/video7 [ 3.090000] s5p-fimc-md: Registered exynos4-fimc.3.capture as /dev/video7 <6>S5P JPEG V4L2 Driver, (c) 2011 Samsung Electronics [ 3.105000] S5P JPEG V4L2 Driver, (c) 2011 Samsung Electronics <6>s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video8 [ 3.115000] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video8 <6>s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video9 [ 3.130000] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video9 <6>s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec [ 3.140000] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec <6>s5p-mfc s5p-mfc: decoder registered as /dev/video10 [ 3.150000] s5p-mfc s5p-mfc: decoder registered as /dev/video10 <6>s5p-mfc s5p-mfc: encoder registered as /dev/video11 [ 3.165000] s5p-mfc s5p-mfc: encoder registered as /dev/video11 <4>_regulator_get: exynos4-hdmi supply hdmi-en not found, using dummy regulator [ 3.175000] _regulator_get: exynos4-hdmi supply hdmi-en not found, using dummy regulator <6>s5p-hdmiphy 8-0038: probe successful [ 3.190000] s5p-hdmiphy 8-0038: probe successful <6>s5p-hdmi exynos4-hdmi: probe sucessful [ 3.200000] s5p-hdmi exynos4-hdmi: probe sucessful <6>Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd. [ 3.210000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd. <6>s5p-mixer s5p-mixer: probe start [ 3.225000] s5p-mixer s5p-mixer: probe start <6>s5p-mixer s5p-mixer: resources acquired [ 3.230000] s5p-mixer s5p-mixer: resources acquired <6>s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi' [ 3.240000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi' <4>s5p-mixer s5p-mixer: module s5p-sdo provides no subdev! [ 3.255000] s5p-mixer s5p-mixer: module s5p-sdo provides no subdev! <6>s5p-mixer s5p-mixer: registered layer graph0 as /dev/video12 [ 3.270000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video12 <6>fb1: registered frame buffer emulation for /dev/video12 [ 3.285000] fb1: registered frame buffer emulation for /dev/video12 <6>s5p-mixer s5p-mixer: registered layer graph1 as /dev/video13 [ 3.295000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video13 <6>fb2: registered frame buffer emulation for /dev/video13 [ 3.310000] fb2: registered frame buffer emulation for /dev/video13 <6>s5p-mixer s5p-mixer: registered layer video0 as /dev/video14 [ 3.320000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video14 <6>fb3: registered frame buffer emulation for /dev/video14 [ 3.335000] fb3: registered frame buffer emulation for /dev/video14 <6>s5p-mixer s5p-mixer: probe successful [ 3.345000] s5p-mixer s5p-mixer: probe successful <6>s5p-g2d s5p-g2d.0: device registered as /dev/video15 [ 3.355000] s5p-g2d s5p-g2d.0: device registered as /dev/video15 <6>thermal polling set for duration=10 sec [ 3.370000] thermal polling set for duration=10 sec <6>Exynos: Kernel Thermal management registered [ 3.380000] Exynos: Kernel Thermal management registered <6>Bluetooth: HCI UART driver ver 2.2 [ 3.390000] Bluetooth: HCI UART driver ver 2.2 <6>Bluetooth: HCI H4 protocol initialized [ 3.395000] Bluetooth: HCI H4 protocol initialized <6>Bluetooth: HCI BCSP protocol initialized [ 3.405000] Bluetooth: HCI BCSP protocol initialized <6>cpuidle: using governor ladder [ 3.415000] cpuidle: using governor ladder <6>cpuidle: using governor menu [ 3.425000] cpuidle: using governor menu <6>sdhci: Secure Digital Host Controller Interface driver [ 3.430000] sdhci: Secure Digital Host Controller Interface driver <6>sdhci: Copyright(c) Pierre Ossman [ 3.445000] sdhci: Copyright(c) Pierre Ossman <6>s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz) [ 3.450000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz) <4>_regulator_get: exynos4-sdhci.2 supply vmmc not found, using dummy regulator [ 3.465000] _regulator_get: exynos4-sdhci.2 supply vmmc not found, using dummy regulator <7>Registered led device: mmc0:: <6>mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA <3>s3c-sdhci exynos4-sdhci.2: could not set regulator OCR (-22) [ 3.485000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA [ 3.485000] s3c-sdhci exynos4-sdhci.2: could not set regulator OCR (-22) <6>s3c-sdhci exynos4-sdhci.0: clock source 2: mmc_busclk.2 (50000000 Hz) [ 3.515000] s3c-sdhci exynos4-sdhci.0: clock source 2: mmc_busclk.2 (50000000 Hz) <4>_regulator_get: exynos4-sdhci.0 supply vmmc not found, using dummy regulator [ 3.530000] _regulator_get: exynos4-sdhci.0 supply vmmc not found, using dummy regulator <7>Registered led device: mmc1:: <6>mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.0] using ADMA [ 3.550000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.0] using ADMA <6>s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (50000000 Hz) [ 3.565000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (50000000 Hz) <4>_regulator_get: exynos4-sdhci.3 supply vmmc not found, using dummy regulator [ 3.580000] _regulator_get: exynos4-sdhci.3 supply vmmc not found, using dummy regulator <7>Registered led device: mmc2:: <6>mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA [ 3.600000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA <7>Registered led device: origen::status1 <7>Registered led device: origen::status2 <6>usbcore: registered new interface driver usbhid [ 3.625000] usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver [ 3.640000] usbhid: USB HID core driver <6>ashmem: initialized [ 3.645000] ashmem: initialized <6>logger: created 256K log 'log_main' [ 3.655000] logger: created 256K log 'log_main' <6>logger: created 256K log 'log_events' [ 3.665000] logger: created 256K log 'log_events' <6>logger: created 256K log 'log_radio' [ 3.670000] logger: created 256K log 'log_radio' <6>logger: created 256K log 'log_system' [ 3.680000] logger: created 256K log 'log_system' <6>mmc0: new high speed SDHC card at address b368 [ 3.700000] mmc0: new high speed SDHC card at address b368 <6>mmcblk0: mmc0:b368 NCard 3.73 GiB [ 3.710000] mmcblk0: mmc0:b368 NCard 3.73 GiB <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 > [ 3.725000] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 > <3>s3c-sdhci exynos4-sdhci.0: could not set regulator OCR (-22) [ 3.735000] s3c-sdhci exynos4-sdhci.0: could not set regulator OCR (-22) <3>s3c-sdhci exynos4-sdhci.3: could not set regulator OCR (-22) [ 3.780000] s3c-sdhci exynos4-sdhci.3: could not set regulator OCR (-22) <6>asoc: alc5625-aif1 <-> samsung-i2s.0 mapping ok [ 3.800000] asoc: alc5625-aif1 <-> samsung-i2s.0 mapping ok <6>ALSA device list: [ 3.810000] ALSA device list: <6> #0: ORIGEN-I2S [ 3.815000] #0: ORIGEN-I2S <6>oprofile: using arm/armv7-ca9 [ 3.825000] oprofile: using arm/armv7-ca9 <6>TCP cubic registered [ 3.830000] TCP cubic registered <6>NET: Registered protocol family 10 [ 3.840000] NET: Registered protocol family 10 <6>IPv6 over IPv4 tunneling driver [ 3.850000] IPv6 over IPv4 tunneling driver <6>NET: Registered protocol family 17 [ 3.860000] NET: Registered protocol family 17 <6>Bluetooth: RFCOMM TTY layer initialized [ 3.870000] Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM socket layer initialized [ 3.880000] Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM ver 1.11 [ 3.890000] Bluetooth: RFCOMM ver 1.11 <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.895000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>Bluetooth: BNEP filters: protocol multicast [ 3.905000] Bluetooth: BNEP filters: protocol multicast <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.915000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>rfkill_gpio rfkill_gpio: origen-bt device registered. [ 3.925000] rfkill_gpio rfkill_gpio: origen-bt device registered. <6>EXYNOS4210: Adaptive Support Voltage init [ 3.935000] EXYNOS4210: Adaptive Support Voltage init <6>EXYNOS4: ASV: Support 1.2GHz and Group is 0x40000003 [ 3.945000] EXYNOS4: ASV: Support 1.2GHz and Group is 0x40000003 <6>VFP support v0.3: [ 3.955000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 implementor 41 architecture 3 part 30 variant 9 rev 2 <5>Registering SWP/SWPB emulation handler [ 3.970000] Registering SWP/SWPB emulation handler <4>regulator_init_complete: VDD_G3D_1.1V: incomplete constraints, leaving on [ 3.990000] regulator_init_complete: VDD_G3D_1.1V: incomplete constraints, leaving on <4>regulator_init_complete: VADC_3.3V: incomplete constraints, leaving on [ 4.005000] regulator_init_complete: VADC_3.3V: incomplete constraints, leaving on <4>regulator_init_complete: VMIPI_1.8V: incomplete constraints, leaving on [ 4.020000] regulator_init_complete: VMIPI_1.8V: incomplete constraints, leaving on <4>regulator_init_complete: VMIPI_1.1V: incomplete constraints, leaving on [ 4.035000] regulator_init_complete: VMIPI_1.1V: incomplete constraints, leaving on <4>regulator_init_complete: VDD_ABB_3.3V: incomplete constraints, leaving on [ 4.050000] regulator_init_complete: VDD_ABB_3.3V: incomplete constraints, leaving on <6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input1 [ 4.065000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1 <6>s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 4.080000] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) <6>DVFS: VDD_ARM Voltage table set with 3 Group [ 4.095000] DVFS: VDD_ARM Voltage table set with 3 Group <6>Freeing init memory: 296K [ 4.100000] Freeing init memory: 296K <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 4.110000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.465000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) <6>EXT4-fs (mmcblk0p5): recovery complete [ 5.260000] EXT4-fs (mmcblk0p5): recovery complete <6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) [ 5.270000] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) <6>EXT4-fs (mmcblk0p6): recovery complete [ 6.995000] EXT4-fs (mmcblk0p6): recovery complete <6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 7.005000] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) <3>android_usb: already disabled [ 7.050000] android_usb: already disabled <6>adb_bind_config [ 7.055000] adb_bind_config <3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 7.215000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' <6>s3c-hsotg s3c-hsotg: ep_dequeue(ec8a8000,ec321940) [ 7.245000] s3c-hsotg s3c-hsotg: ep_dequeue(ec8a8000,ec321940) <6>mtp_bind_config [ 7.255000] mtp_bind_config <6>adb_bind_config [ 7.260000] adb_bind_config <6>adb_open [ 7.270000] adb_open root@android:/ # <6>warning: `rild' uses 32-bit capabilities (legacy support in use) [ 7.760000] warning: `rild' uses 32-bit capabilities (legacy support in use) <3>init: untracked pid 2262 exited [ 8.550000] init: untracked pid 2262 exited <3>init: untracked pid 2328 exited [ 12.780000] init: untracked pid 2328 exited <3>init: untracked pid 2340 exited [ 17.985000] init: untracked pid 2340 exited <3>init: untracked pid 2336 exited [ 17.995000] init: untracked pid 2336 exited <3>init: untracked pid 2360 exited [ 22.185000] init: untracked pid 2360 exited <3>init: untracked pid 2364 exited