Live CD doesn't detect partitions on /dev/sdb

[Johan Walles]

root@ubuntu:/home/warty # fdisk -l /dev/sda

Disk /dev/sda: 18.2 GB, 18210036736 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot Start End Blocks Id System
/dev/sda1 1 2213 17775891 83 Linux
root@ubuntu:/home/warty # fdisk -l /dev/sdb

Disk /dev/sdb: 18.2 GB, 18210036736 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4 32098+ 83 Linux
/dev/sdb2 5 1024 8193150 83 Linux
/dev/sdb3 1025 1916 7164990 83 Linux
/dev/sdb4 1917 2213 2385652+ f W95 Ext'd (LBA)
/dev/sdb5 1917 2177 2096451 82 Linux swap

root@ubuntu:/home/warty # mount
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
/sys on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda1 on /mnt/sda1 type ext3 (rw)

This is with a Warty Live CD downloaded a couple of days ago.

[Andreas Mueller (amu)]

This is a SCSI/USB or SATA system ? could you send please also output from lspci.

Thanks & Cheers
amu

[Johan Walles (walles)]

This is a SCSI system.

Note that neither mounting the partitions manually nor reading from the
partitions after mounting them is any problem, it's just that they don't get
mounted automatically.

Here's the output of lspci. Note that I did "lspci" on the currently installed
RHAS21 rather than using the Warty live cd.

00:00.0 Host bridge: Intel Corporation 82850 860 (Wombat) Chipset Host Bridge
(MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:02.0 PCI bridge: Intel Corporation 82860 860 (Wombat) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82820 820 (Camino 2) Chipset ISA Bridge
(ICH2) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82820 820 (Camino 2) Chipset IDE U100
(rev 04)
00:1f.2 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub
A) (rev 04)
00:1f.3 SMBus: Intel Corporation 82820 820 (Camino 2) Chipset SMBus (rev 04)
00:1f.4 USB Controller: Intel Corporation 82820 820 (Camino 2) Chipset USB (Hub
B) (rev 04)
00:1f.5 Multimedia audio controller: Intel Corporation 82820 820 (Camino 2)
Chipset AC'97 Audio Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY
02:1f.0 PCI bridge: Intel Corporation 82806AA PCI64 Hub PCI Bridge (rev 03)
03:00.0 PIC: Intel Corporation 82806AA PCI64 Hub Advanced Programmable Interrupt
Controller (rev 01)
03:0e.0 SCSI storage controller: Adaptec 7892P (rev 02)
04:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 78)
04:0c.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020

[Andreas Mueller (amu)]

This is now fixed. Thanks for reporting