When I plug in card reader to usb (Axago All in One) it gets mount correctly:
[ 128.428096] usb 1-1: new high speed USB device number 3 using ehci_hcd
[ 128.865310] usbcore: registered new interface driver uas
[ 128.901486] Initializing USB Mass Storage driver...
[ 128.901586] usbcore: registered new interface driver usb-storage
[ 128.901589] USB Mass Storage support registered.
[ 128.903679] scsi6 : usb-storage 1-1:1.0
[ 128.903822] usbcore: registered new interface driver ums-realtek
[ 129.910817] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 129.932866] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 130.456296] sd 6:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
[ 130.457158] sd 6:0:0:0: [sdb] Write Protect is off
[ 130.457165] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 130.458032] sd 6:0:0:0: [sdb] No Caching mode page present
[ 130.458039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 130.461649] sd 6:0:0:0: [sdb] No Caching mode page present
[ 130.461657] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 130.462894] sdb: sdb1
[ 130.465644] sd 6:0:0:0: [sdb] No Caching mode page present
[ 130.465652] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 130.465659] sd 6:0:0:0: [sdb] Attached SCSI removable disk
But after while (sometimes less than minute, sometimes longer):
[ 189.668175] usb 1-1: USB disconnect, device number 3
[ 190.120268] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 190.244054] usb 2-1: device descriptor read/64, error -71
[ 190.468087] usb 2-1: device descriptor read/64, error -71
[ 190.628138] hub 2-0:1.0: unable to enumerate USB device on port 1
device is disconnected and detected as full speed USB using uhci_hcd (previously detected as high speed USB using ehci_hcd).
And then it is unable to enumerate. No /dev/sdb1 device is then accessible.
It's annoying especially if you want quickly move photos from card and go away for another shots.
Please explain where the bug is or release fix.
Thanks
cat /proc/version:
Linux version 3.0.0-15-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 15:59:53 UTC 2012
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 1.23-0ubuntu4
Architecture: i386
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: uni468 1899 F.... pulseaudio
CRDA: Error: [Errno 2] Adresář nebo soubor neexistuje
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xee240000 irq 46'
Mixer name : 'Analog Devices AD1981'
Components : 'HDA:11d41981,17aa2025,00100200'
Controls : 21
Simple ctrls : 12
Card29.Amixer.info:
Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 7CHT21WW-1.09'
Mixer name : 'ThinkPad EC 7CHT21WW-1.09'
Components : ''
Controls : 2
Simple ctrls : 1
Card29.Amixer.values:
Simple mixer control 'Console',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 14
Mono: Playback 0 [0%] [off]
DistroRelease: Ubuntu 11.10
HibernationDevice: RESUME=UUID=df4ebbc8-12e7-4b9c-8f69-1a2594b0a2a3
MachineType: LENOVO 9455W42
Package: linux (not installed)
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-15-generic root=UUID=6981baab-6717-4b2d-9b46-88474fd88a03 ro
ProcVersionSignature: Ubuntu 3.0.0-15.26-generic 3.0.13
RelatedPackageVersions:
linux-restricted-modules-3.0.0-15-generic N/A
linux-backports-modules-3.0.0-15-generic N/A
linux-firmware 1.60
RfKill: Error: [Errno 2] Adresář nebo soubor neexistuje
Tags: oneiric
Uname: Linux 3.0.0-15-generic i686
UpgradeStatus: Upgraded to oneiric on 2012-01-11 (19 days ago)
UserGroups: adm admin audio cdrom dialout dip fax floppy fuse lpadmin netdev plugdev sambashare scanner tape users video
WifiSyslog:
Jan 30 08:32:04 bruca-nb NetworkManager[989]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tap0, iface: tap0)
Jan 30 08:32:04 bruca-nb NetworkManager[989]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tap0, iface: tap0): no ifupdown configuration found.
Jan 30 08:32:04 bruca-nb NetworkManager[989]: <warn> /sys/devices/virtual/net/tap0: couldn't determine device driver; ignoring...
Jan 30 08:32:14 bruca-nb kernel: [ 2303.280022] tap0: no IPv6 routers present
WpaSupplicantLog:
dmi.bios.date: 01/09/2007
dmi.bios.vendor: LENOVO
dmi.bios.version: 7CETC1WW (2.11 )
dmi.board.name: 9455W42
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr7CETC1WW(2.11):bd01/09/2007:svnLENOVO:pn9455W42:pvrThinkPadR60:rvnLENOVO:rn9455W42:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 9455W42
dmi.product.version: ThinkPad R60
dmi.sys.vendor: LENOVO
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:
apport-collect 923375
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the Ubuntu Kernel Team.