[    30.080] 
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    30.080] X Protocol Version 11, Revision 0
[    30.080] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    30.080] Current Operating System: Linux deimos 3.0.0-13-generic #22-Ubuntu SMP Wed Nov 2 13:25:36 UTC 2011 i686
[    30.080] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=d1e50825-97b6-49a2-9b95-ba5d4b00ec9e ro quiet splash vt.handoff=7
[    30.080] Build Date: 19 October 2011  05:09:41AM
[    30.080] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[    30.080] Current version of pixman: 0.22.2
[    30.080] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.080] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.080] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  5 07:18:09 2011
[    30.164] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.164] (==) No Layout section.  Using the first Screen section.
[    30.164] (==) No screen section available. Using defaults.
[    30.164] (**) |-->Screen "Default Screen Section" (0)
[    30.164] (**) |   |-->Monitor "<default monitor>"
[    30.164] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    30.164] (==) Automatically adding devices
[    30.164] (==) Automatically enabling devices
[    30.165] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    30.165] 	Entry deleted from font path.
[    30.165] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[    30.165] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    30.165] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.165] (II) Loader magic: 0x823ada0
[    30.165] (II) Module ABI versions:
[    30.165] 	X.Org ANSI C Emulation: 0.4
[    30.165] 	X.Org Video Driver: 10.0
[    30.165] 	X.Org XInput driver : 12.3
[    30.165] 	X.Org Server Extension : 5.0
[    30.167] (--) PCI:*(0:0:2:0) 8086:2a02:152d:0763 rev 3, Mem @ 0xf0600000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[    30.167] (--) PCI: (0:0:2:1) 8086:2a03:152d:0763 rev 3, Mem @ 0xf0700000/1048576
[    30.167] (II) Open ACPI successful (/var/run/acpid.socket)
[    30.167] (II) LoadModule: "extmod"
[    30.211] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    30.211] (II) Module extmod: vendor="X.Org Foundation"
[    30.211] 	compiled for 1.10.4, module version = 1.0.0
[    30.211] 	Module class: X.Org Server Extension
[    30.211] 	ABI class: X.Org Server Extension, version 5.0
[    30.211] (II) Loading extension MIT-SCREEN-SAVER
[    30.211] (II) Loading extension XFree86-VidModeExtension
[    30.211] (II) Loading extension XFree86-DGA
[    30.211] (II) Loading extension DPMS
[    30.211] (II) Loading extension XVideo
[    30.211] (II) Loading extension XVideo-MotionCompensation
[    30.211] (II) Loading extension X-Resource
[    30.212] (II) LoadModule: "dbe"
[    30.212] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    30.212] (II) Module dbe: vendor="X.Org Foundation"
[    30.212] 	compiled for 1.10.4, module version = 1.0.0
[    30.212] 	Module class: X.Org Server Extension
[    30.212] 	ABI class: X.Org Server Extension, version 5.0
[    30.212] (II) Loading extension DOUBLE-BUFFER
[    30.212] (II) LoadModule: "glx"
[    30.212] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.212] (II) Module glx: vendor="X.Org Foundation"
[    30.213] 	compiled for 1.10.4, module version = 1.0.0
[    30.213] 	ABI class: X.Org Server Extension, version 5.0
[    30.213] (==) AIGLX enabled
[    30.213] (II) Loading extension GLX
[    30.213] (II) LoadModule: "record"
[    30.213] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.331] (II) Module record: vendor="X.Org Foundation"
[    30.331] 	compiled for 1.10.4, module version = 1.13.0
[    30.331] 	Module class: X.Org Server Extension
[    30.331] 	ABI class: X.Org Server Extension, version 5.0
[    30.332] (II) Loading extension RECORD
[    30.332] (II) LoadModule: "dri"
[    30.332] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.332] (II) Module dri: vendor="X.Org Foundation"
[    30.332] 	compiled for 1.10.4, module version = 1.0.0
[    30.332] 	ABI class: X.Org Server Extension, version 5.0
[    30.332] (II) Loading extension XFree86-DRI
[    30.332] (II) LoadModule: "dri2"
[    30.333] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.333] (II) Module dri2: vendor="X.Org Foundation"
[    30.333] 	compiled for 1.10.4, module version = 1.2.0
[    30.333] 	ABI class: X.Org Server Extension, version 5.0
[    30.333] (II) Loading extension DRI2
[    30.333] (==) Matched intel as autoconfigured driver 0
[    30.333] (==) Matched vesa as autoconfigured driver 1
[    30.333] (==) Matched fbdev as autoconfigured driver 2
[    30.333] (==) Assigned the driver to the xf86ConfigLayout
[    30.333] (II) LoadModule: "intel"
[    30.333] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    30.357] (II) Module intel: vendor="X.Org Foundation"
[    30.357] 	compiled for 1.10.4, module version = 2.15.901
[    30.357] 	Module class: X.Org Video Driver
[    30.357] 	ABI class: X.Org Video Driver, version 10.0
[    30.357] (II) LoadModule: "vesa"
[    30.357] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.357] (II) Module vesa: vendor="X.Org Foundation"
[    30.357] 	compiled for 1.10.2, module version = 2.3.0
[    30.357] 	Module class: X.Org Video Driver
[    30.357] 	ABI class: X.Org Video Driver, version 10.0
[    30.357] (II) LoadModule: "fbdev"
[    30.358] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.358] (II) Module fbdev: vendor="X.Org Foundation"
[    30.358] 	compiled for 1.10.0, module version = 0.4.2
[    30.358] 	ABI class: X.Org Video Driver, version 10.0
[    30.358] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    30.359] (II) VESA: driver for VESA chipsets: vesa
[    30.359] (II) FBDEV: driver for framebuffer: fbdev
[    30.359] (++) using VT number 7

[    30.361] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    30.361] (WW) Falling back to old probe method for vesa
[    30.361] (WW) Falling back to old probe method for fbdev
[    30.361] (II) Loading sub module "fbdevhw"
[    30.361] (II) LoadModule: "fbdevhw"
[    30.362] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.362] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.362] 	compiled for 1.10.4, module version = 0.0.2
[    30.362] 	ABI class: X.Org Video Driver, version 10.0
[    30.363] drmOpenDevice: node name is /dev/dri/card0
[    30.363] drmOpenDevice: open result is 12, (OK)
[    30.363] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    30.363] drmOpenDevice: node name is /dev/dri/card0
[    30.363] drmOpenDevice: open result is 12, (OK)
[    30.363] drmOpenByBusid: drmOpenMinor returns 12
[    30.363] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    30.363] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    30.363] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    30.363] (==) intel(0): RGB weight 888
[    30.363] (==) intel(0): Default visual is TrueColor
[    30.363] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[    30.363] (--) intel(0): Chipset: "965GM"
[    30.363] (**) intel(0): Relaxed fencing enabled
[    30.363] (**) intel(0): Wait on SwapBuffers? enabled
[    30.363] (**) intel(0): Triple buffering? enabled
[    30.363] (**) intel(0): Framebuffer tiled
[    30.363] (**) intel(0): Pixmaps tiled
[    30.363] (**) intel(0): 3D buffers tiled
[    30.363] (**) intel(0): SwapBuffers wait enabled
[    30.363] (==) intel(0): video overlay key set to 0x101fe
[    30.363] (II) intel(0): Output LVDS1 has no monitor section
[    30.363] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    30.436] (II) intel(0): Output VGA1 has no monitor section
[    30.436] (II) intel(0): Output TV1 has no monitor section
[    30.437] (II) intel(0): EDID for output LVDS1
[    30.437] (II) intel(0): Manufacturer: AUO  Model: 8074  Serial#: 0
[    30.437] (II) intel(0): Year: 2006  Week: 1
[    30.437] (II) intel(0): EDID Version: 1.3
[    30.437] (II) intel(0): Digital Display Input
[    30.437] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    30.437] (II) intel(0): Gamma: 2.20
[    30.437] (II) intel(0): No DPMS capabilities specified
[    30.437] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    30.437] (II) intel(0): First detailed timing is preferred mode
[    30.437] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.315 greenY: 0.555
[    30.437] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    30.437] (II) intel(0): Manufacturer's mask: 0
[    30.437] (II) intel(0): Supported detailed timing:
[    30.437] (II) intel(0): clock: 71.1 MHz   Image Size:  331 x 207 mm
[    30.437] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    30.437] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    30.437] (II) intel(0): Unknown vendor-specific block f
[    30.437] (II) intel(0):  AUO
[    30.437] (II) intel(0):  B154EW08 V0
[    30.437] (II) intel(0): EDID (in hex):
[    30.437] (II) intel(0): 	00ffffffffffff0006af748000000000
[    30.437] (II) intel(0): 	01100103802115780a1cf59758508e27
[    30.437] (II) intel(0): 	27505400000001010101010101010101
[    30.437] (II) intel(0): 	010101010101c71b00a0502017303020
[    30.437] (II) intel(0): 	36004bcf100000180000000f00000000
[    30.437] (II) intel(0): 	00000000000000000020000000fe0041
[    30.437] (II) intel(0): 	554f0a202020202020202020000000fe
[    30.437] (II) intel(0): 	004231353445573038205630200a0045
[    30.437] (II) intel(0): EDID vendor "AUO", prod id 32884
[    30.437] (II) intel(0): Printing DDC gathered Modelines:
[    30.437] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    30.437] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    30.437] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    30.438] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    30.438] (II) intel(0): Printing probed modes for output LVDS1
[    30.438] (II) intel(0): Modeline "1280x800"x60.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    30.438] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    30.438] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    30.438] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    30.438] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    30.509] (II) intel(0): EDID for output VGA1
[    30.509] (II) intel(0): Manufacturer: ACR  Model: 5990  Serial#: 4803
[    30.509] (II) intel(0): Year: 2005  Week: 38
[    30.509] (II) intel(0): EDID Version: 1.3
[    30.509] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    30.509] (II) intel(0): Sync:  Separate  CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[    30.509] (II) intel(0): Max Image Size [cm]: horiz.: 37  vert.: 30
[    30.509] (II) intel(0): Gamma: 2.20
[    30.509] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    30.509] (II) intel(0): First detailed timing is preferred mode
[    30.509] (II) intel(0): redX: 0.639 redY: 0.342   greenX: 0.297 greenY: 0.615
[    30.509] (II) intel(0): blueX: 0.146 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[    30.509] (II) intel(0): Supported established timings:
[    30.509] (II) intel(0): 720x400@70Hz
[    30.509] (II) intel(0): 640x480@60Hz
[    30.509] (II) intel(0): 640x480@67Hz
[    30.509] (II) intel(0): 640x480@72Hz
[    30.509] (II) intel(0): 640x480@75Hz
[    30.509] (II) intel(0): 800x600@56Hz
[    30.509] (II) intel(0): 800x600@60Hz
[    30.509] (II) intel(0): 800x600@72Hz
[    30.509] (II) intel(0): 800x600@75Hz
[    30.509] (II) intel(0): 832x624@75Hz
[    30.509] (II) intel(0): 1024x768@60Hz
[    30.509] (II) intel(0): 1024x768@70Hz
[    30.509] (II) intel(0): 1024x768@75Hz
[    30.509] (II) intel(0): 1280x1024@75Hz
[    30.509] (II) intel(0): Manufacturer's mask: 0
[    30.509] (II) intel(0): Supported standard timings:
[    30.509] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[    30.509] (II) intel(0): #1: hsize: 1152  vsize 864  refresh: 70  vid: 19057
[    30.509] (II) intel(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    30.509] (II) intel(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    30.509] (II) intel(0): #4: hsize: 1280  vsize 960  refresh: 70  vid: 19073
[    30.509] (II) intel(0): #5: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[    30.509] (II) intel(0): #6: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    30.509] (II) intel(0): Supported detailed timing:
[    30.509] (II) intel(0): clock: 108.0 MHz   Image Size:  375 x 301 mm
[    30.509] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    30.509] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    30.509] (II) intel(0): Serial No: ETL2302217
[    30.509] (II) intel(0): Ranges: V min: 49 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 145 MHz
[    30.509] (II) intel(0): Monitor name: Acer AL1914
[    30.509] (II) intel(0): EDID (in hex):
[    30.509] (II) intel(0): 	00ffffffffffff0004729059c3120000
[    30.509] (II) intel(0): 	260f01036d251e78eaa2a5a3574c9d25
[    30.509] (II) intel(0): 	115054bfef007140714a714f8140814a
[    30.509] (II) intel(0): 	814f81800101302a009851002a403070
[    30.509] (II) intel(0): 	1300772d1100001e000000ff0045544c
[    30.509] (II) intel(0): 	323330323231370a2020000000fd0031
[    30.509] (II) intel(0): 	4b18500e000a202020202020000000fc
[    30.509] (II) intel(0): 	004163657220414c313931340a2000b2
[    30.509] (II) intel(0): Printing probed modes for output VGA1
[    30.510] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    30.510] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    30.510] (II) intel(0): Modeline "1280x960"x75.0  129.94  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz)
[    30.510] (II) intel(0): Modeline "1280x960"x70.0  120.90  1280 1368 1504 1728  960 961 964 999 -hsync +vsync (70.0 kHz)
[    30.510] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    30.510] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    30.510] (II) intel(0): Modeline "1152x864"x70.0   96.73  1152 1224 1344 1536  864 865 868 900 -hsync +vsync (63.0 kHz)
[    30.510] (II) intel(0): Modeline "1152x864"x60.0   81.58  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    30.510] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    30.510] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    30.510] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    30.510] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    30.510] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    30.510] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    30.510] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    30.510] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    30.510] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    30.510] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    30.510] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    30.510] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    30.510] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    30.510] (II) intel(0): EDID for output TV1
[    30.510] (II) intel(0): Printing probed modes for output TV1
[    30.510] (II) intel(0): Modeline "848x480"x30.0   14.51  848 849 912 944  480 481 512 513 (15.4 kHz)
[    30.510] (II) intel(0): Modeline "640x480"x30.0   11.31  640 641 704 736  480 481 512 513 (15.4 kHz)
[    30.510] (II) intel(0): Modeline "1024x768"x30.0   26.89  1024 1025 1088 1120  768 769 800 801 (24.0 kHz)
[    30.510] (II) intel(0): Modeline "800x600"x30.0   17.00  800 801 864 896  600 601 632 633 (19.0 kHz)
[    30.510] (II) intel(0): Output LVDS1 connected
[    30.510] (II) intel(0): Output VGA1 connected
[    30.510] (II) intel(0): Output TV1 disconnected
[    30.510] (II) intel(0): Using fuzzy aspect match for initial modes
[    30.510] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    30.510] (II) intel(0): Output VGA1 using initial mode 1024x768
[    30.510] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    30.510] (II) intel(0): Kernel page flipping support detected, enabling
[    30.510] (**) intel(0): Display dimensions: (330, 210) mm
[    30.510] (**) intel(0): DPI set to (78, 92)
[    30.510] (II) Loading sub module "fb"
[    30.510] (II) LoadModule: "fb"
[    30.511] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.511] (II) Module fb: vendor="X.Org Foundation"
[    30.511] 	compiled for 1.10.4, module version = 1.0.0
[    30.511] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    30.511] (II) Loading sub module "dri2"
[    30.511] (II) LoadModule: "dri2"
[    30.511] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.511] (II) Module dri2: vendor="X.Org Foundation"
[    30.511] 	compiled for 1.10.4, module version = 1.2.0
[    30.511] 	ABI class: X.Org Server Extension, version 5.0
[    30.511] (II) UnloadModule: "vesa"
[    30.511] (II) Unloading vesa
[    30.511] (II) UnloadModule: "fbdev"
[    30.511] (II) Unloading fbdev
[    30.511] (II) UnloadModule: "fbdevhw"
[    30.511] (II) Unloading fbdevhw
[    30.512] (==) Depth 24 pixmap format is 32 bpp
[    30.512] (II) intel(0): [DRI2] Setup complete
[    30.512] (II) intel(0): [DRI2]   DRI driver: i965
[    30.512] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    30.528] (II) UXA(0): Driver registered support for the following operations:
[    30.528] (II)         solid
[    30.528] (II)         copy
[    30.528] (II)         composite (RENDER acceleration)
[    30.528] (II)         put_image
[    30.528] (II)         get_image
[    30.528] (==) intel(0): Backing store disabled
[    30.528] (==) intel(0): Silken mouse enabled
[    30.528] (II) intel(0): Initializing HW Cursor
[    30.864] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    30.864] (==) intel(0): DPMS enabled
[    30.864] (==) intel(0): Intel XvMC decoder enabled
[    30.864] (II) intel(0): Set up textured video
[    30.864] (II) intel(0): Set up overlay video
[    30.864] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    30.864] (II) intel(0): direct rendering: DRI2 Enabled
[    30.864] (==) intel(0): hotplug detection: "enabled"
[    30.865] (--) RandR disabled
[    30.865] (II) Initializing built-in extension Generic Event Extension
[    30.865] (II) Initializing built-in extension SHAPE
[    30.865] (II) Initializing built-in extension MIT-SHM
[    30.865] (II) Initializing built-in extension XInputExtension
[    30.865] (II) Initializing built-in extension XTEST
[    30.865] (II) Initializing built-in extension BIG-REQUESTS
[    30.865] (II) Initializing built-in extension SYNC
[    30.865] (II) Initializing built-in extension XKEYBOARD
[    30.865] (II) Initializing built-in extension XC-MISC
[    30.865] (II) Initializing built-in extension SECURITY
[    30.865] (II) Initializing built-in extension XINERAMA
[    30.865] (II) Initializing built-in extension XFIXES
[    30.865] (II) Initializing built-in extension RENDER
[    30.865] (II) Initializing built-in extension RANDR
[    30.865] (II) Initializing built-in extension COMPOSITE
[    30.865] (II) Initializing built-in extension DAMAGE
[    30.865] (II) Initializing built-in extension GESTURE
[    30.881] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
[    30.887] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.887] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.887] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    30.887] (II) AIGLX: enabled GLX_SGI_make_current_read
[    30.887] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.887] (II) AIGLX: Loaded and initialized i965
[    30.887] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.891] (II) intel(0): Setting screen physical size to 270 x 203
[    30.927] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    30.944] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    30.944] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.944] (II) LoadModule: "evdev"
[    30.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.946] (II) Module evdev: vendor="X.Org Foundation"
[    30.946] 	compiled for 1.10.2, module version = 2.6.0
[    30.946] 	Module class: X.Org XInput Driver
[    30.946] 	ABI class: X.Org XInput driver, version 12.3
[    30.946] (II) Using input driver 'evdev' for 'Power Button'
[    30.946] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.946] (**) Power Button: always reports core events
[    30.946] (**) Power Button: Device: "/dev/input/event3"
[    30.946] (--) Power Button: Found keys
[    30.946] (II) Power Button: Configuring as keyboard
[    30.946] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    30.946] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    30.946] (**) Option "xkb_rules" "evdev"
[    30.946] (**) Option "xkb_model" "pc105"
[    30.946] (**) Option "xkb_layout" "de"
[    30.950] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[    30.954] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    30.954] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    30.954] (II) Using input driver 'evdev' for 'Video Bus'
[    30.954] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.955] (**) Video Bus: always reports core events
[    30.955] (**) Video Bus: Device: "/dev/input/event5"
[    30.955] (--) Video Bus: Found keys
[    30.955] (II) Video Bus: Configuring as keyboard
[    30.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[    30.955] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    30.955] (**) Option "xkb_rules" "evdev"
[    30.955] (**) Option "xkb_model" "pc105"
[    30.955] (**) Option "xkb_layout" "de"
[    30.968] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    30.968] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.968] (II) Using input driver 'evdev' for 'Power Button'
[    30.968] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.968] (**) Power Button: always reports core events
[    30.968] (**) Power Button: Device: "/dev/input/event1"
[    30.968] (--) Power Button: Found keys
[    30.968] (II) Power Button: Configuring as keyboard
[    30.968] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    30.968] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    30.968] (**) Option "xkb_rules" "evdev"
[    30.968] (**) Option "xkb_model" "pc105"
[    30.969] (**) Option "xkb_layout" "de"
[    30.970] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    30.970] (II) No input driver/identifier specified (ignoring)
[    30.970] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    30.970] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    30.970] (II) Using input driver 'evdev' for 'Sleep Button'
[    30.970] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.970] (**) Sleep Button: always reports core events
[    30.970] (**) Sleep Button: Device: "/dev/input/event2"
[    30.971] (--) Sleep Button: Found keys
[    30.976] (II) Sleep Button: Configuring as keyboard
[    30.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    30.976] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    30.976] (**) Option "xkb_rules" "evdev"
[    30.976] (**) Option "xkb_model" "pc105"
[    30.976] (**) Option "xkb_layout" "de"
[    30.980] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
[    30.980] (II) No input driver/identifier specified (ignoring)
[    30.994] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[    30.994] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    30.994] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    30.994] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.994] (**) Logitech USB Receiver: always reports core events
[    30.994] (**) Logitech USB Receiver: Device: "/dev/input/event8"
[    30.995] (--) Logitech USB Receiver: Found 20 mouse buttons
[    30.995] (--) Logitech USB Receiver: Found scroll wheel(s)
[    30.995] (--) Logitech USB Receiver: Found relative axes
[    30.995] (--) Logitech USB Receiver: Found x and y relative axes
[    30.995] (II) Logitech USB Receiver: Configuring as mouse
[    30.995] (II) Logitech USB Receiver: Adding scrollwheel support
[    30.995] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    30.995] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.995] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3.2/2-3.3.2:1.0/input/input8/event8"
[    30.995] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[    30.995] (II) Logitech USB Receiver: initialized for relative axes.
[    30.995] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    30.995] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    30.995] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    30.995] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    30.996] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[    30.996] (II) No input driver/identifier specified (ignoring)
[    30.997] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[    30.997] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    30.997] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    30.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.997] (**) Logitech USB Receiver: always reports core events
[    30.997] (**) Logitech USB Receiver: Device: "/dev/input/event9"
[    30.997] (--) Logitech USB Receiver: Found 1 mouse buttons
[    30.997] (--) Logitech USB Receiver: Found scroll wheel(s)
[    30.997] (--) Logitech USB Receiver: Found relative axes
[    30.997] (--) Logitech USB Receiver: Found absolute axes
[    30.997] (II) evdev-grail: failed to open grail, no gesture support
[    30.997] (--) Logitech USB Receiver: Found keys
[    30.997] (II) Logitech USB Receiver: Configuring as mouse
[    30.997] (II) Logitech USB Receiver: Configuring as keyboard
[    30.997] (II) Logitech USB Receiver: Adding scrollwheel support
[    30.997] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    30.997] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.997] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3.2/2-3.3.2:1.1/input/input9/event9"
[    30.997] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    30.997] (**) Option "xkb_rules" "evdev"
[    30.997] (**) Option "xkb_model" "pc105"
[    30.997] (**) Option "xkb_layout" "de"
[    30.998] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[    30.998] (II) Logitech USB Receiver: initialized for absolute axes.
[    30.998] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    30.998] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    30.998] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    30.998] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    31.005] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    31.005] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.005] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.005] (**) AT Translated Set 2 keyboard: always reports core events
[    31.005] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    31.006] (--) AT Translated Set 2 keyboard: Found keys
[    31.006] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    31.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    31.006] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    31.006] (**) Option "xkb_rules" "evdev"
[    31.006] (**) Option "xkb_model" "pc105"
[    31.006] (**) Option "xkb_layout" "de"
[    31.007] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    31.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.007] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.007] (II) LoadModule: "synaptics"
[    31.007] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.007] (II) Module synaptics: vendor="X.Org Foundation"
[    31.007] 	compiled for 1.10.4, module version = 1.4.1
[    31.007] 	Module class: X.Org XInput Driver
[    31.007] 	ABI class: X.Org XInput driver, version 12.3
[    31.007] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.007] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.007] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.008] (**) Option "Device" "/dev/input/event6"
[    31.040] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.040] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.040] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.040] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.040] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    31.072] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    31.072] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    31.104] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    31.104] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.104] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.104] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.104] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.104] (II) SynPS/2 Synaptics TouchPad: failed to open grail, no gesture support
[    31.104] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    31.105] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    31.105] (II) No input driver/identifier specified (ignoring)
[    35.520] (II) intel(0): EDID vendor "AUO", prod id 32884
[    35.520] (II) intel(0): Printing DDC gathered Modelines:
[    35.520] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    35.673] (II) intel(0): Allocated new frame buffer 1280x1824 stride 5120, tiled
[    36.426] (II) intel(0): EDID vendor "AUO", prod id 32884
[    36.426] (II) intel(0): Printing DDC gathered Modelines:
[    36.426] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    36.498] (II) intel(0): EDID vendor "AUO", prod id 32884
[    36.498] (II) intel(0): Printing DDC gathered Modelines:
[    36.498] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    37.681] (II) intel(0): EDID vendor "AUO", prod id 32884
[    37.681] (II) intel(0): Printing DDC gathered Modelines:
[    37.681] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[    44.471] (II) XKB: reuse xkmfile /var/lib/xkb/server-81EC4871279DB1D73113D19E789F270C19322F52.xkm
[  2113.676] (II) intel(0): EDID vendor "AUO", prod id 32884
[  2113.721] (II) intel(0): Printing DDC gathered Modelines:
[  2113.721] (II) intel(0): Modeline "1280x800"x0.0   71.11  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.4 kHz)
[  2219.988] 
Backtrace:
[  2219.989] 0: /usr/bin/X (xorg_backtrace+0x37) [0x80a66f7]
[  2219.989] 1: /usr/bin/X (0x8048000+0x62b3a) [0x80aab3a]
[  2219.989] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x63a40c]
[  2219.989] 3: /usr/lib/xorg/modules/extensions/librecord.so (0x557000+0x212f) [0x55912f]
[  2219.989] 4: /usr/bin/X (_CallCallbacks+0x3c) [0x80769ec]
[  2219.989] 5: /usr/bin/X (WriteToClient+0x273) [0x80a95a3]
[  2219.989] 6: /usr/lib/xorg/modules/extensions/libdri2.so (ProcDRI2WaitMSCReply+0x70) [0xed0d70]
[  2219.989] 7: /usr/lib/xorg/modules/extensions/libdri2.so (DRI2WaitMSCComplete+0x73) [0xecf003]
[  2220.011] 8: /usr/lib/xorg/modules/drivers/intel_drv.so (0x6ff000+0x2453b) [0x72353b]
[  2220.011] 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x6ff000+0x9233) [0x708233]
[  2220.011] 10: /usr/lib/i386-linux-gnu/libdrm.so.2 (drmHandleEvent+0xce) [0x66d9ee]
[  2220.011] 11: /usr/lib/xorg/modules/drivers/intel_drv.so (0x6ff000+0x9297) [0x708297]
[  2220.011] 12: /usr/bin/X (WakeupHandler+0x53) [0x8076243]
[  2220.011] 13: /usr/bin/X (WaitForSomething+0x1a5) [0x80a3fa5]
[  2220.011] 14: /usr/bin/X (0x8048000+0x29ed2) [0x8071ed2]
[  2220.011] 15: /usr/bin/X (0x8048000+0x1c70c) [0x806470c]
[  2220.011] 16: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0x1aa113]
[  2220.011] 17: /usr/bin/X (0x8048000+0x1ca21) [0x8064a21]
[  2220.011] Segmentation fault at address 0xb6748008
[  2220.046] 
Caught signal 11 (Segmentation fault). Server aborting
[  2220.046] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  2220.046] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2220.046] 
[  2220.080] (II) Power Button: Close
[  2220.094] (II) UnloadModule: "evdev"
[  2220.094] (II) Unloading evdev
[  2220.094] (II) Video Bus: Close
[  2220.094] (II) UnloadModule: "evdev"
[  2220.094] (II) Unloading evdev
[  2220.100] (II) Power Button: Close
[  2220.100] (II) UnloadModule: "evdev"
[  2220.100] (II) Unloading evdev
[  2220.108] (II) Sleep Button: Close
[  2220.108] (II) UnloadModule: "evdev"
[  2220.108] (II) Unloading evdev
[  2220.116] (II) Logitech USB Receiver: Close
[  2220.116] (II) UnloadModule: "evdev"
[  2220.116] (II) Unloading evdev
[  2220.118] (II) Logitech USB Receiver: Close
[  2220.118] (II) UnloadModule: "evdev"
[  2220.118] (II) Unloading evdev
[  2220.120] (II) AT Translated Set 2 keyboard: Close
[  2220.120] (II) UnloadModule: "evdev"
[  2220.120] (II) Unloading evdev
[  2220.123] (II) UnloadModule: "synaptics"
[  2220.123] (II) Unloading synaptics
[  2220.123] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2220.247]  ddxSigGiveUp: Closing log