BCM4313 not working on 11.10

[gust]

after several houres of test, my wifi/wlan is not working. it recognize my ESSID but finaly no connection.
hw:hp pavilion dm1 netbook.

ProblemType: Bug
DistroRelease: Ubuntu 11.10
Package: firmware-b43-installer 1:014-9
ProcVersionSignature: Ubuntu 3.0.0-12.20-generic-pae 3.0.4
Uname: Linux 3.0.0-12-generic-pae i686
NonfreeKernelModules: wl fglrx
ApportVersion: 1.23-0ubuntu4
Architecture: i386
Date: Fri Nov 11 21:15:04 2011
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=de_CH:de
 PATH=(custom, no user)
 LANG=de_CH.UTF-8
 SHELL=/bin/bash
SourcePackage: b43-fwcutter
UpgradeStatus: No upgrade log present (probably fresh install)

[gust (aenzler)]

lspci -n | grep 14e4
03:00.0 0280: 14e4:4727 (rev 01)

beside the supported sta-drivers from ubuntu 11.10 ,I tested also the procedure descriped by
http://www.broadcom.com/support/802.11/linux_sta.php
for my machine,
but no success!

[gust (aenzler)]

after the hints from
http://aptosid.com/index.php?name=PNphpBB2&file=viewtopic&t=862&highlight=broadcom

Edit my post because i don't remember the order!
Remove anything install for the bcm4313 and we start with:
1) dpkg -l | grep firmware-brcm80211
2) dpkg -l | grep broadcom-sta-source
3) m-a a-i broadcom-sta-source
4) ifconfig
5)rmmod ssb && rmmod brcm80211 && echo -e "blacklist ssb\nblacklist brcm80211" > /etc/modprobe.d/broadcom.conf
6)rmmod b43 && rmmod ssb && rmmod brcm80211 && echo -e "blacklist ssb\nblacklist brcm80211" > /etc/modprobe.d/broadcom.conf
7)reboot the system.

my system finialy seem to work :-)

[gust (aenzler)]

...arg but bluetooth is still not working, what a nightmare!

[Launchpad Janitor (janitor)]

Status changed to 'Confirmed' because the bug affects multiple users.

[Tonal (tonal-promsoft)]

see also https://bugs.launchpad.net/bugs/905388

[Ma Hsiao-chun (mahsiaochun)]

According to http://linuxwireless.org/en/users/Drivers/b43#Supported_devices
Your chip is "not tested" under b43 and should use wl, so I added bcmwl to the bug report.