Welcome to PulseAudio! Use "help" for usage information.
>>> 2 source(s) available.
    index: 0
	name: <alsa_output.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1040
	volume: 0: 100% 1: 100%
	        0: 0.00 dB 1: 0.00 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: yes
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC>
	module: 4
	properties:
		device.description = "Monitor of PCM2902 Audio Codec Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:1d.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments Japan"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 1
	name: <alsa_input.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: 0: 100% 1: 100%
	        0: 0.00 dB 1: 0.00 dB
	        balance 0.00
	base volume: 100%
	             0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC>
	module: 4
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB Audio CODEC"
		alsa.long_card_name = "Burr-Brown from TI USB Audio CODEC at usb-0000:00:1d.0-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:1d.0-usb-0:2:1.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/sound/card1"
		udev.id = "usb-Burr-Brown_from_TI_USB_Audio_CODEC-00-CODEC"
		device.bus = "usb"
		device.vendor.id = "08bb"
		device.vendor.name = "Texas Instruments Japan"
		device.product.id = "2902"
		device.product.name = "PCM2902 Audio Codec"
		device.serial = "Burr-Brown_from_TI_USB_Audio_CODEC"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "PCM2902 Audio Codec Analog Stereo"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB08bb:2902"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
>>>