11.05 fails to boot on C4 Beagle

[Zach Pfeffer]

loads u-boot.bin from nand. not sure why. is the right MLO u-boot.bin
on first fat partition?
- Hide quoted text -

On Thu, May 26, 2011 at 7:44 PM, Zach Pfeffer <email address hidden> wrote:
> https://android-build.linaro.org/builds/~linaro-android/beagle-11.05-release/
> fails to boot
>
> I get:
>
>
> Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
> Loading u-boot.bin from nand
>
>
> U-Boot 2009.11-rc1-00601-g3aa4b51 (Jan 05 2010 - 20:56:38)
>
> OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
> OMAP3 Beagle board + LPDDR/NAND
> I2C: ready
> DRAM: 256 MB
> NAND: 256 MiB
> *** Warning - bad CRC or NAND, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Board revision C4
> Die ID #716400240000000004039f220201b020
> Hit any key to stop autoboot: 0
> No MMC card found
> Booting from nand ...
>
> NAND read: device 0 offset 0x280000, size 0x400000
> 4194304 bytes read: OK
> Wrong Image Format for bootm command
> ERROR: can't get kernel image!
> OMAP3 beagleboard.org #
>

--

 - Alexander

[Zach Pfeffer (pfefferz)]

11.06 Beagle boots. Use:

wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.06-release/2/artifact/build/out/target/product/beagleboard/boot.tar.bz2
wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.06-release/2/artifact/build/out/target/product/beagleboard/system.tar.bz2
wget --no-check-certificate https://android-build.linaro.org/jenkins/job/linaro-android_beagle-11.06-release/2/artifact/build/out/target/product/beagleboard/userdata.tar.bz2
bzr branch lp:linaro-image-tools
./linaro-image-tools/linaro-android-media-create --mmc /dev/sdd --dev beagle --system system.tar.bz2 --userdata userdata.tar.bz2 --boot boot.tar.bz2

to install.

[Alexander Sack (asac)]

what was the problem initially?

[Zach Pfeffer (pfefferz)]

Just that it didn't boot.