linaro-media-create exits with ValueError building graphical engineering image for ux500
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Linaro Image Tools |
Fix Released
|
High
|
Lee Jones |
Bug Description
jesse@jesse-
I see...
Device Mount point Size
/dev/sda none 305245MB
/dev/sr0 none 0MB
/dev/sdd none 0MB
/dev/sde none 0MB
/dev/sda1 / 296503MB
/dev/sda2 none 8740MB
/dev/sdc none 0MB
/dev/sdb none 7592MB
/dev/sda5 none 8740MB
/dev/sdb1 /media/1CC2-775B 7588MB
Are you 100% sure, on selecting [/dev/sdb] (y/n)? y
[sudo] password for jesse:
-------
Installing (apt-get) hwpack_
Unpacking hardware pack ...Done
Updating apt package lists ...
Ign file: ./ InRelease
Ign file: ./ Release.gpg
Ign file: ./ Release
Ign file: ./ Translation-en
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Get:1 http://
Get:2 http://
Hit http://
Hit http://
Hit http://
Get:3 http://
Get:4 http://
Hit http://
Ign http://
Hit http://
Hit http://
Get:5 http://
Get:6 http://
Ign http://
Get:7 http://
Ign http://
Ign http://
Ign http://
Get:8 http://
Ign http://
Ign http://
Get:9 http://
Get:10 http://
Ign http://
Ign http://
Get:11 http://
Get:12 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Fetched 7477 kB in 53s (139 kB/s)
Reading package lists...
W: GPG error: http://
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
devio flash-kernel linux-image-
u-boot-
0 upgraded, 6 newly installed, 0 to remove and 71 not upgraded.
Need to get 0 B/3333 kB of archives.
After this operation, 0 B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
wireless-crda linux-image-
u-boot-
Install these packages without verification [y/N]? y
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package wireless-crda.
(Reading database ... 114663 files and directories currently installed.)
Unpacking wireless-crda (from .../wireless-
Selecting previously deselected package linux-image-
Unpacking linux-image-
Done.
Selecting previously deselected package devio.
Unpacking devio (from .../devio_
Selecting previously deselected package flash-kernel.
Unpacking flash-kernel (from .../flash-
Selecting previously deselected package linux-u8500.
Unpacking linux-u8500 (from .../linux-
Selecting previously deselected package u-boot-
Unpacking u-boot-linaro-u8500 (from .../u-boot-
Processing triggers for man-db ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up wireless-crda (1.13) ...
Setting up linux-image-
Running depmod.
update-initramfs: Generating /boot/initrd.
/bin/df: Warning: cannot read table of mounted file systems: No such file or directory
Examining /etc/kernel/
run-parts: executing /etc/kernel/
run-parts: executing /etc/kernel/
run-parts: executing /etc/kernel/
Setting up devio (1.2-1build1) ...
Setting up flash-kernel (2.28ubuntu17) ...
Setting up linux-u8500 (2.6.35.1000.6) ...
Setting up u-boot-linaro-u8500 (2010.12-
Done
Cleaning up ...W: GPG error: http://
Done
-------
proc umounted
Checking that no-one is using this disk right now ...
OK
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Formating boot partition
mkfs.vfat 3.0.9 (31 Jan 2010)
Formating root partition
mke2fs 1.41.12 (17-May-2010)
Filesystem label=rootfs
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
481440 inodes, 1923783 blocks
96189 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1971322880
59 block groups
32768 blocks per group, 32768 fragments per group
8160 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Traceback (most recent call last):
File "/usr/bin/
args.device, args.is_live, args.is_lowmem, args.consoles)
File "/usr/lib/
boot_disk, boot_script, boot_device_
File "/usr/lib/
boot_
File "/usr/lib/
cls.load_addr, uboot_parts_dir, cls.kernel_suffix, boot_dir)
File "/usr/lib/
'%s/
File "/usr/lib/
"No files found matching '%s'; can't continue" % regex)
ValueError: No files found matching '/tmp/tmpfZdyNF
Related branches
- Guilherme Salgado (community): Needs Fixing
-
Diff: 12 lines (+1/-1)1 file modifiedlinaro_media_create/boards.py (+1/-1)
Changed in linaro-image-tools: | |
assignee: | nobody → Lee Jones (lag) |
status: | Triaged → In Progress |
Changed in linaro-image-tools: | |
status: | In Progress → Fix Committed |
Changed in linaro-image-tools: | |
status: | Fix Committed → Fix Released |
The LT hwpack no longer contains the kernel name that linaro-image-tools expects.
http:// lists.linaro. org/pipermail/ linaro- dev/2011- March/002969. html
was where I think this was raised.
I'm unsure of how to proceed here until we hear back from the landing team.
Thanks,
James