Ubuntu 10.10 PPC Radeon 7500 no acceleration with OSS Radeon driver

Bug #722998 reported by Don Loats
14
This bug affects 2 people
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Expired
Undecided
Unassigned

Bug Description

Ubuntu 10.10 PPC on an 800Mhz PowerMac G4 Quicksilver with a Radeon 7500(RV200) AGP 4x card, not getting 3D even though the OSS Radeon is installed by default, GLXGears gets between 58-60 FPS, Open Arena gets 1 frame every few seconds at 640x480 with minimum settings and Assault Cube crashes half way through loading.

I'm not sure if it's related but video playback looks more pixelated then it should be in Totem and Mplayer, but looks fine in VLC.

Linux denex-desktop 2.6.35-27-powerpc #47-Ubuntu Sat Feb 12 07:05:01 UTC 2011 ppc GNU/Linux

---

Ubuntu 2.6.35-27.47-powerpc 2.6.35.11

[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.35-27-powerpc (buildd@adare) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #47-Ubuntu Sat Feb 12 07:05:01 UTC 2011 (Ubuntu 2.6.35-27.47-powerpc 2.6.35.11)
[ 0.000000] Found initrd at 0xc1e00000:0xc2917000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: PowerMac G4 Silver
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=822, gen1=823
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0xffffffff
[ 0.000000] nvram: NR partition at 0xffffffff
[ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal empty
[ 0.000000] HighMem 0x00030000 -> 0x00060000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00060000
[ 0.000000] On node 0 totalpages: 393216
[ 0.000000] free_area_init_node: node 0, pgdat c07a0768, node_mem_map c087a000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1536 pages used for memmap
[ 0.000000] HighMem zone: 195072 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144
[ 0.000000] Kernel command line: root=/dev/hdb3 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 786432k
[ 0.000000] Memory: 1535180k/1572864k available (7636k kernel code, 37684k reserved, 240k data, 751k bss, 360k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512 nr_irqs:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: on
[ 0.000000] time_init: decrementer frequency = 33.217800 MHz
[ 0.000000] time_init: processor frequency = 799.999998 MHz
[ 0.000000] clocksource: timebase mult[786ad89] shift[22] registered
[ 0.000000] clockevent: decrementer mult[880f634] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000186] pid_max: default: 32768 minimum: 301
[ 0.000240] Security Framework initialized
[ 0.000336] AppArmor: AppArmor initialized
[ 0.000342] Yama: becoming mindful.
[ 0.000495] Mount-cache hash table entries: 512
[ 0.000966] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.003504] Initializing cgroup subsys ns
[ 0.003522] Initializing cgroup subsys devices
[ 0.003532] Initializing cgroup subsys freezer
[ 0.003541] Initializing cgroup subsys net_cls
[ 0.003613] ftrace: allocating 17480 entries in 52 pages
[ 0.015564] devtmpfs: initialized
[ 0.016257] regulator: core version 0.5
[ 0.016407] NET: Registered protocol family 16
[ 0.016870] MPC7450 family performance monitor hardware support registered
[ 0.016929] alloc irq_desc for 42 on node 0
[ 0.016936] alloc kstat_irqs on node 0
[ 0.016951] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.017000] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.017011] channel 0 bus <multibus>
[ 0.017018] channel 1 bus <multibus>
[ 0.017046] alloc irq_desc for 26 on node 0
[ 0.017051] alloc kstat_irqs on node 0
[ 0.017059] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.017083] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.017093] channel 0 bus <multibus>
[ 0.017115] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000
[ 0.017125] channel 1 bus <multibus>
[ 0.017134] channel 2 bus <multibus>
[ 0.017188] alloc irq_desc for 25 on node 0
[ 0.017195] alloc kstat_irqs on node 0
[ 0.017203] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.017235] alloc irq_desc for 47 on node 0
[ 0.017241] alloc kstat_irqs on node 0
[ 0.017248] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.017421] PCI: Probing PCI hardware
[ 0.017640] pci 0000:00:10.0: reg 10: [mem 0x98000000-0x9fffffff pref]
[ 0.017653] pci 0000:00:10.0: reg 14: [io 0x0400-0x04ff]
[ 0.017664] pci 0000:00:10.0: reg 18: [mem 0x90000000-0x9000ffff]
[ 0.017685] pci 0000:00:10.0: reg 30: [mem 0x90020000-0x9003ffff pref]
[ 0.017713] pci 0000:00:10.0: supports D1 D2
[ 0.017783] alloc irq_desc for 48 on node 0
[ 0.017789] alloc kstat_irqs on node 0
[ 0.017800] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.018135] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff]
[ 0.018194] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff]
[ 0.018261] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff]
[ 0.018350] alloc irq_desc for 27 on node 0
[ 0.018356] alloc kstat_irqs on node 0
[ 0.018367] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.018400] alloc irq_desc for 28 on node 0
[ 0.018406] alloc kstat_irqs on node 0
[ 0.018413] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.018911] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]
[ 0.018950] pci 0002:20:0e.0: supports D1 D2
[ 0.018957] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.018967] pci 0002:20:0e.0: PME# disabled
[ 0.018995] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]
[ 0.019020] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
[ 0.019086] alloc irq_desc for 40 on node 0
[ 0.019092] alloc kstat_irqs on node 0
[ 0.019103] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.019131] alloc irq_desc for 41 on node 0
[ 0.019137] alloc kstat_irqs on node 0
[ 0.019144] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.019441] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff]
[ 0.019463] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff]
[ 0.019471] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff]
[ 0.019480] pci_bus 0000:00: resource 2 [mem 0x90000000-0x9fffffff]
[ 0.019489] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff]
[ 0.019497] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff]
[ 0.019505] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff]
[ 0.019514] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff]
[ 0.019523] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff]
[ 0.022830] bio: create slab <bio-0> at 0
[ 0.023434] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.023458] vgaarb: loaded
[ 0.023980] SCSI subsystem initialized
[ 0.024149] libata version 3.00 loaded.
[ 0.024323] usbcore: registered new interface driver usbfs
[ 0.024362] usbcore: registered new interface driver hub
[ 0.024496] usbcore: registered new device driver usb
[ 0.024986] NetLabel: Initializing
[ 0.024996] NetLabel: domain hash size = 128
[ 0.025000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.025056] NetLabel: unlabeled traffic allowed by default
[ 0.025180] Switching to clocksource timebase
[ 0.030929] AppArmor: AppArmor Filesystem Enabled
[ 0.036391] NET: Registered protocol family 2
[ 0.036553] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.037634] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.041615] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.042612] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.042621] TCP reno registered
[ 0.042633] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.042673] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.042963] NET: Registered protocol family 1
[ 0.043048] PCI: CLS mismatch (32 != 1020), using 32 bytes
[ 0.043257] Thermal assist unit not available
[ 0.043990] audit: initializing netlink socket (disabled)
[ 0.044032] type=2000 audit(1298329896.031:1): initialized
[ 0.119923] Trying to unpack rootfs image as initramfs...
[ 0.205740] highmem bounce pool size: 64 pages
[ 0.210540] VFS: Disk quotas dquot_6.5.2
[ 0.210751] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.217554] fuse init (API version 7.14)
[ 0.217973] msgmni has been set to 1462
[ 0.803617] Freeing initrd memory: 11356k freed
[ 0.816425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.816441] io scheduler noop registered
[ 0.816446] io scheduler deadline registered
[ 0.816485] io scheduler cfq registered (default)
[ 0.816965] radeonfb 0000:00:10.0: enabling device (0086 -> 0087)
[ 1.016194] radeonfb: Found Open Firmware ROM Image
[ 1.016212] radeonfb: Retrieved PLL infos from Open Firmware
[ 1.016223] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=270.00 MHz
[ 1.016231] radeonfb: PLL min 12000 max 35000
[ 1.110274] i2c i2c-2: unable to read EDID block.
[ 1.262263] i2c i2c-2: unable to read EDID block.
[ 1.414262] i2c i2c-2: unable to read EDID block.
[ 1.566262] i2c i2c-3: unable to read EDID block.
[ 1.718262] i2c i2c-3: unable to read EDID block.
[ 1.870265] i2c i2c-3: unable to read EDID block.
[ 1.926209] radeonfb: Monitor 1 type CRT found
[ 1.926215] radeonfb: EDID probed
[ 1.926220] radeonfb: Monitor 2 type CRT found
[ 1.947414] Console: switching to colour frame buffer device 120x33
[ 1.957521] radeonfb (0000:00:10.0): ATI Radeon 5157 "QW"
[ 1.958872] Generic non-volatile memory driver v1.1
[ 1.962516] brd: module loaded
[ 1.962763] MacIO PCI driver attached to Keylargo chipset
[ 1.963265] alloc irq_desc for 32 on node 0
[ 1.963273] alloc kstat_irqs on node 0
[ 1.963289] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.963558] alloc irq_desc for 19 on node 0
[ 1.963565] alloc kstat_irqs on node 0
[ 1.963574] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.963594] alloc irq_desc for 16 on node 0
[ 1.963600] alloc kstat_irqs on node 0
[ 1.963607] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.963710] alloc irq_desc for 20 on node 0
[ 1.963716] alloc kstat_irqs on node 0
[ 1.963725] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.963744] alloc irq_desc for 17 on node 0
[ 1.963750] alloc kstat_irqs on node 0
[ 1.963758] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.963877] alloc irq_desc for 21 on node 0
[ 1.963884] alloc kstat_irqs on node 0
[ 1.963892] irq: irq 21 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.963913] alloc irq_desc for 18 on node 0
[ 1.963918] alloc kstat_irqs on node 0
[ 1.963926] irq: irq 13 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.964029] alloc irq_desc for 22 on node 0
[ 1.964036] alloc kstat_irqs on node 0
[ 1.964044] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 1.964074] alloc irq_desc for 23 on node 0
[ 1.964080] alloc kstat_irqs on node 0
[ 1.964087] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 1.964107] alloc irq_desc for 24 on node 0
[ 1.964112] alloc kstat_irqs on node 0
[ 1.964120] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 1.964256] alloc irq_desc for 29 on node 0
[ 1.964263] alloc kstat_irqs on node 0
[ 1.964271] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 1.964291] alloc irq_desc for 30 on node 0
[ 1.964296] alloc kstat_irqs on node 0
[ 1.964304] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 1.964323] alloc irq_desc for 31 on node 0
[ 1.964328] alloc kstat_irqs on node 0
[ 1.964336] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 1.965086] Uniform Multi-Platform E-IDE driver
[ 1.965292] adb: starting probe task...
[ 1.965309] adb: finished probe task...
[ 2.985213] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 2.985255] Probing IDE interface ide0...
[ 3.273506] hda: ST3120814A, ATA DISK drive
[ 3.609202] hdb: WDC WD2500JB-00GVA0, ATA DISK drive
[ 3.609324] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.609515] hda: UDMA/66 mode selected
[ 3.609706] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.610939] hdb: UDMA/66 mode selected
[ 3.612248] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 19
[ 4.629210] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
[ 4.629245] Probing IDE interface ide1...
[ 5.029373] hdc: LITE-ON DVDRW SHM-165H6S, ATAPI CD/DVD-ROM drive
[ 5.701302] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.701579] hdc: MWDMA2 mode selected
[ 5.701893] ide1 at 0xf102e000-0xf102e070,0xf102e160 on irq 20
[ 6.721227] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 1, irq 21
[ 6.721260] Probing IDE interface ide2...
[ 7.289324] ide2 at 0xf1036000-0xf1036070,0xf1036160 on irq 21
[ 7.289380] ide-gd driver 1.18
[ 7.289464] hda: max request size: 512KiB
[ 7.354804] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
[ 7.379191] hda: cache flushes supported
[ 7.379561] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
[ 7.404499] hdb: max request size: 512KiB
[ 7.422420] hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 7.424363] hdb: cache flushes supported
[ 7.424624] hdb: [mac] hdb1 hdb2 hdb3 hdb4 hdb5 hdb6
[ 7.438571] ide-cd driver 5.00
[ 7.440511] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 7.440532] Uniform CD-ROM driver Revision: 3.20
[ 7.450104] Fixed MDIO Bus: probed
[ 7.450128] tun: Universal TUN/TAP device driver, 1.6
[ 7.450134] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 7.450413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.450532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.450601] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
[ 7.450639] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 7.450805] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 7.450866] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 7.525617] hub 1-0:1.0: USB hub found
[ 7.525644] hub 1-0:1.0: 2 ports detected
[ 7.525820] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
[ 7.525853] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 7.526000] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 7.526055] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 7.601506] hub 2-0:1.0: USB hub found
[ 7.601525] hub 2-0:1.0: 2 ports detected
[ 7.601712] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.602212] mice: PS/2 mouse device common for all mice
[ 7.602494] PowerMac i2c bus pmu 2 registered
[ 7.602583] PowerMac i2c bus pmu 1 registered
[ 7.602652] PowerMac i2c bus mac-io 0 registered
[ 7.602719] PowerMac i2c bus uni-n 1 registered
[ 7.602801] PowerMac i2c bus uni-n 0 registered
[ 7.603137] device-mapper: uevent: version 1.0.3
[ 7.603580] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: <email address hidden>
[ 7.604493] TCP cubic registered
[ 7.604507] NET: Registered protocol family 17
[ 7.604983] registered taskstats version 1
[ 7.605460] input: PMU as /devices/virtual/input/input0
[ 7.605494] /build/buildd/linux-2.6.35/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 7.605632] Freeing unused kernel memory: 360k init
[ 7.685584] udev[56]: starting version 163
[ 7.977703] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 8.186458] hub 2-1:1.0: USB hub found
[ 8.188287] hub 2-1:1.0: 3 ports detected
[ 8.362959] sungem.c:v0.98 8/24/03 David S. Miller (<email address hidden>)
[ 8.490291] usb 2-1.1: new full speed USB device using ohci_hcd and address 3
[ 8.505661] PHY ID: 2060e1, addr: 0
[ 8.507109] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:92:6f:52
[ 8.507124] eth0: Found BCM5421 PHY
[ 8.646900] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 8.676701] usb 2-1.2: new low speed USB device using ohci_hcd and address 4
[ 8.796294] usbcore: registered new interface driver hiddev
[ 8.802697] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 8.803238] generic-usb 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:19.0-1.1/input0
[ 8.818571] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
[ 8.819111] generic-usb 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:19.0-1.1/input1
[ 8.828787] input: Fujitsu Component Apple Optical USB Mouse as /devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3
[ 8.829814] generic-usb 0003:05AC:0306.0003: input,hidraw2: USB HID v1.10 Mouse [Fujitsu Component Apple Optical USB Mouse] on usb-0001:10:19.0-1.2/input0
[ 8.830642] usbcore: registered new interface driver usbhid
[ 8.830655] usbhid: USB HID core driver
[ 8.879002] EXT4-fs (hdb3): INFO: recovery required on readonly filesystem
[ 8.879023] EXT4-fs (hdb3): write access will be enabled during recovery
[ 9.137587] firewire_core: created device fw0: GUID 000393fffe926f52, S400
[ 9.163632] firewire_core: created device fw1: GUID 0030e002e0454647, S400
[ 9.163650] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 9.184714] scsi0 : SBP-2 IEEE-1394
[ 9.658156] firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries)
[ 9.663848] scsi 0:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4
[ 9.703601] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 9.706353] sd 0:0:0:0: [sda] Write Protect is off
[ 9.706364] sd 0:0:0:0: [sda] Mode Sense: 10 00 00 00
[ 9.708409] sd 0:0:0:0: [sda] Cache data unavailable
[ 9.708419] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.717858] sd 0:0:0:0: [sda] Cache data unavailable
[ 9.717873] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.717911] sda: sda1
[ 9.739249] sd 0:0:0:0: [sda] Cache data unavailable
[ 9.739262] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 9.739272] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.760164] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.913582] eth0: Link is up at 100 Mbps, full-duplex.
[ 11.845150] EXT4-fs (hdb3): orphan cleanup on readonly fs
[ 11.845231] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 3014670
[ 11.845535] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10617732
[ 11.845870] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10617731
[ 11.861874] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 6030793
[ 11.875188] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10618544
[ 11.875287] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10618543
[ 11.875343] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10617004
[ 11.875403] EXT4-fs (hdb3): ext4_orphan_cleanup: deleting unreferenced inode 10616912
[ 11.875450] EXT4-fs (hdb3): 8 orphan inodes deleted
[ 11.875462] EXT4-fs (hdb3): recovery complete
[ 12.178139] EXT4-fs (hdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.542835] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 19.625275] Adding 4528124k swap on /dev/hdb4. Priority:-1 extents:1 across:4528124k
[ 19.884368] udev[278]: starting version 163
[ 19.887952] EXT4-fs (hdb3): re-mounted. Opts: errors=remount-ro
[ 20.878754] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 21.123490] Linux agpgart interface v0.103
[ 21.469773] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset
[ 21.471163] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 21.471396] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 21.477045] pmac_zilog: 0.6 (Benjamin Herrenschmidt <email address hidden>)
[ 21.477159] pmac_zilog: i2c-modem detected, id: 1
[ 21.477368] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Internal modem
[ 21.477863] ttyPZ1 at MMIO 0x80013000 (irq = 29) is a Z85c30 ESCC - Serial port
[ 21.790228] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 21.790246] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[ 21.790256] hda: possibly failed opcode: 0xef
[ 21.972999] type=1400 audit(1298329917.956:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=433 comm="apparmor_parser"
[ 22.075879] type=1400 audit(1298329918.060:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[ 22.076516] type=1400 audit(1298329918.060:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[ 23.609670] alloc irq_desc for 33 on node 0
[ 23.609684] alloc kstat_irqs on node 0
[ 23.609700] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 33
[ 23.609747] alloc irq_desc for 34 on node 0
[ 23.609753] alloc kstat_irqs on node 0
[ 23.609761] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 34
[ 23.636719] alloc irq_desc for 61 on node 0
[ 23.636734] alloc kstat_irqs on node 0
[ 23.636750] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 23.743169] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 23.743191] hdb: task_no_data_intr: error=0x04 { DriveStatusError }
[ 23.743202] hdb: possibly failed opcode: 0xef
[ 24.051071] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5
[ 24.119550] type=1400 audit(1298329920.104:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=664 comm="apparmor_parser"
[ 24.168557] type=1400 audit(1298329920.152:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=662 comm="apparmor_parser"
[ 24.230692] type=1400 audit(1298329920.216:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=662 comm="apparmor_parser"
[ 24.260405] apm_emu: PMU APM Emulation initialized.
[ 24.297953] type=1400 audit(1298329920.284:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=675 comm="apparmor_parser"
[ 24.299152] type=1400 audit(1298329920.284:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=675 comm="apparmor_parser"
[ 24.299794] type=1400 audit(1298329920.284:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=675 comm="apparmor_parser"
[ 24.540794] eth0: Link is up at 100 Mbps, full-duplex.
[ 24.540809] eth0: Pause is disabled
[ 24.673311] lp: driver loaded but no devices found
[ 24.735904] type=1400 audit(1298329920.720:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=689 comm="apparmor_parser"
[ 24.897320] ppdev: user-space parallel port driver
[ 25.528881] NET: Registered protocol family 10
[ 25.530822] lo: Disabled Privacy Extensions
[ 26.379331] [drm] Initialized drm 1.1.0 20060810

0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP [106b:002d]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 16, Cache Line Size: 32 bytes
 Capabilities: [80] AGP version 1.0
  Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
 Kernel driver in use: agpgart-uninorth
 Kernel modules: uninorth-agp

---

0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] [1002:5157] (prog-if 00 [VGA controller])
 Subsystem: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] [1002:5157]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 255 (2000ns min), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 48
 Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
 Region 1: I/O ports at 0400 [size=256]
 Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
 Expansion ROM at 90020000 [disabled] [size=128K]
 Capabilities: [58] AGP version 2.0
  Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: radeonfb
 Kernel modules: radeon

0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI [106b:002e]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 16, Cache Line Size: 32 bytes
 Kernel modules: uninorth-agp

0001:10:17.0 Unassigned class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03)
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 16, Cache Line Size: 32 bytes
 Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
 Kernel driver in use: macio

0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 16 (750ns min, 21500ns max)
 Interrupt: pin A routed to IRQ 27
 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci_hcd

0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 16 (750ns min, 21500ns max)
 Interrupt: pin A routed to IRQ 28
 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ohci_hcd

0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 Internal PCI [106b:002f]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 16, Cache Line Size: 32 bytes
 Kernel modules: uninorth-agp

0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (prog-if 10 [OHCI])
 Subsystem: Agere Systems FW322/323 [11c1:5811]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 40
 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
 Kernel driver in use: firewire_ohci
 Kernel modules: firewire-ohci, ohci1394

0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
 Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 41
 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
 Expansion ROM at f5100000 [disabled] [size=1M]
 Kernel driver in use: gem
 Kernel modules: sungem

Kern.log http://pastebin.com/31PyMQya
Xorg.0.log if it helps any http://pastebin.com/0xU0PNNJ

Revision history for this message
Brad Figg (brad-figg) wrote : Missing required logs.

This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:

apport-collect 722998

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

Changed in linux (Ubuntu):
status: New → Incomplete
tags: added: maverick
Revision history for this message
Owen Savill (osavill) wrote :

Problem still exists on 11.10. I am looking for a solution but it's outside of configuration I will probably not be able to find it.

Revision history for this message
Owen Savill (osavill) wrote :

Just noticed this is a PPC issue but I'm using x86 so it doesn't look as if it's a platform specific issue.

Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.