X.Org X Server 1.10.1 Release Date: 2011-04-15 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-29-server i686 Ubuntu Current Operating System: Linux admin1-desktop 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=5d36a8e3-df1c-429c-8038-1b23d6c1da4f ro quiet splash vt.handoff=7 Build Date: 19 April 2011 03:33:17PM xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.20.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 29 07:48:53 2011 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (--) PCI:*(0:0:2:0) 8086:2592:8086:1999 rev 4, Mem @ 0xfe880000/524288, 0xd0000000/268435456, 0xfe840000/262144, I/O @ 0x0000ac00/8 (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (==) AIGLX enabled (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.13.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.2.0 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 2.14.0 (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.10.0, module version = 2.3.0 (WW) Warning, couldn't open module fbdev (II) Unloading fbdev (EE) Failed to load module "fbdev" (module does not exist, 0) (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) VESA: driver for VESA chipsets: vesa (++) using VT number 7 WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.38-8-generic/kernel/drivers/i2c/algos/i2c-algo-bit.ko): No such device WARNING: Error inserting drm (/lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/drm.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device FATAL: Error inserting i915 (/lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/i915/i915.ko): No such device (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.1.0 (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) VESA(0): initializing int10 (II) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) VESA(0): Depth 24, (--) framebuffer bpp 32 (==) VESA(0): RGB weight 888 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) VESA(0): VESA VBE DDC supported (II) VESA(0): Manufacturer: SAM Model: 41e Serial#: 1297691187 (II) VESA(0): Year: 2009 Week: 5 (II) VESA(0): EDID Version: 1.3 (II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) VESA(0): Sync: Separate Composite SyncOnGreen (II) VESA(0): Max Image Size [cm]: horiz.: 51 vert.: 29 (II) VESA(0): Gamma: 2.20 (II) VESA(0): DPMS capabilities: Off; RGB/Color Display (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) VESA(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) VESA(0): Supported established timings: (II) VESA(0): 640x480@60Hz (II) VESA(0): 800x600@56Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported standard timings: (II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) VESA(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) VESA(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) VESA(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) VESA(0): Supported detailed timing: (II) VESA(0): clock: 156.8 MHz Image Size: 510 x 287 mm (II) VESA(0): h_active: 2048 h_sync: 2096 h_sync_end 2128 h_blank_end 2208 h_border: 0 (II) VESA(0): v_active: 1152 v_sync: 1155 v_sync_end 1160 v_blanking: 1185 v_border: 0 (II) VESA(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 165 MHz (II) VESA(0): Monitor name: SyncMaster (II) VESA(0): Serial No: H9XS108678 (II) VESA(0): EDID (in hex): (II) VESA(0): 00ffffffffffff004c2d1e043332594d (II) VESA(0): 051301030e331d782aee91a3544c9926 (II) VESA(0): 0f50542308008180814081009500b300 (II) VESA(0): 0101010101013b3d00a0808021403020 (II) VESA(0): 3500fe1f1100001a000000fd00383c1e (II) VESA(0): 5110000a202020202020000000fc0053 (II) VESA(0): 796e634d61737465720a2020000000ff (II) VESA(0): 00483958533130383637380a20200052 (II) VESA(0): EDID vendor "SAM", prod id 1054 (II) VESA(0): Using EDID range info for horizontal sync (II) VESA(0): Using EDID range info for vertical refresh (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "2048x1152"x0.0 156.75 2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync (71.0 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) VESA(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) VESA(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) VESA(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) VESA(0): : Using hsync range of 30.00-81.00 kHz (II) VESA(0): : Using vrefresh range of 56.00-60.00 Hz (II) VESA(0): : Using maximum pixel clock of 165.00 MHz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name) (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): *Built-in mode "1280x1024" (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (**) VESA(0): Display dimensions: (510, 290) mm (**) VESA(0): DPI set to (63, 89) (**) VESA(0): Using "Shadow Framebuffer" (II) Loading /usr/lib/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.1.0 (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (==) Depth 24 pixmap format is 32 bpp (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.10.1, module version = 1.0.0 (II) VESA(0): initializing int10 (II) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected error setting MTRR (base = 0xd0000000, size = 0x007b0000, type = 1) Invalid argument (22) (II) VESA(0): Setting up VESA Mode 0x11B (1280x1024) (==) VESA(0): Default visual is TrueColor (==) VESA(0): Backing store disabled (==) VESA(0): DPMS enabled (==) RandR enabled (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Trying DRI driver /usr/lib/dri/swrast_dri.so (II) AIGLX: Loaded and initialized swrast (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0) (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.10.0.902, module version = 2.6.0 (II) Using input driver 'evdev' for 'Logitech USB Receiver' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event0" (--) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (II) XKB: reuse xkmfile /var/lib/xkb/server-01249E46A3C6B38FBE4BFE599469F76F8E51EBC5.xkm (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1) (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Logitech USB Receiver' (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event1" (--) Logitech USB Receiver: Found 20 mouse buttons (--) Logitech USB Receiver: Found scroll wheel(s) (--) Logitech USB Receiver: Found relative axes (--) Logitech USB Receiver: Found x and y relative axes (--) Logitech USB Receiver: Found absolute axes (II) evdev-grail: failed to open grail, no gesture support (--) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as mouse (II) Logitech USB Receiver: Configuring as keyboard (II) Logitech USB Receiver: Adding scrollwheel support (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (II) Logitech USB Receiver: initialized for relative axes. (WW) Logitech USB Receiver: ignoring absolute axes. (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 (**) Logitech USB Receiver: (accel) acceleration profile 0 (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 (**) Logitech USB Receiver: (accel) acceleration threshold: 4 (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring)