Epson CX5400 not detected in Edgy. Works in Dapper.
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
sane-backends (Ubuntu) |
Fix Released
|
Undecided
|
Unassigned | ||
Bug Description
For dapper:
Fresh install of Dapper. Connect Epson CX5400 to machine, boot machine. Start Xsane Image Scanner. Hit scan, works.
For Edgy:
Install Edgy. Boot with CX5400 connected. Start Xsane. No device detected.
Troubleshooting:
Dapper:
nick@dapper:~$ scanimage -L
device `epson:
nick@dapper:~$ cat /proc/bus/
...
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0808 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB MFP
S: SerialNumber=
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
---
For Edgy:
root@edgy:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
root@edgy:
....
found USB scanner (vendor=0x04b8 [EPSON], product=0x0808 [USB MFP]) at libusb:002:002
....
root@edgy:
....
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0808 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB MFP
S: SerialNumber=
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
....
Changed in sane-backends: | |
status: | Unconfirmed → Confirmed |
nick@edgy:~$ export SANE_DEBUG_ EPSON=128 edgy-sane- cx5400- debug
nick@edgy:~$ scanimage -L 2>&1 &>/tmp/
<file attached>