[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afd70000 (usable) [ 0.000000] BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved) [ 0.000000] BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable) [ 0.000000] BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afebf000 - 00000000afeed000 (usable) [ 0.000000] BIOS-e820: 00000000afeed000 - 00000000afeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FFF00000 mask FFFFF00000 write-protect [ 0.000000] 1 base 0000000000 mask FF80000000 write-back [ 0.000000] 2 base 0080000000 mask FFE0000000 write-back [ 0.000000] 3 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afd70000 (usable) [ 0.000000] modified: 00000000afd70000 - 00000000afdbf000 (reserved) [ 0.000000] modified: 00000000afdbf000 - 00000000afe58000 (usable) [ 0.000000] modified: 00000000afe58000 - 00000000afebf000 (ACPI NVS) [ 0.000000] modified: 00000000afebf000 - 00000000afeed000 (usable) [ 0.000000] modified: 00000000afeed000 - 00000000afeff000 (ACPI data) [ 0.000000] modified: 00000000afeff000 - 00000000aff00000 (usable) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37856000 - 37fef1b2 [ 0.000000] Allocated new RAMDISK: 008de000 - 010771b2 [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef1b1 to 008de000 - 010771b1 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT afefe120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013) [ 0.000000] ACPI: FACP afefd000 000F4 (v04 HP 30F2 00000003 MSFT 01000013) [ 0.000000] ACPI: DSDT afef0000 09BB0 (v01 HP 30F2 F0000000 MSFT 01000013) [ 0.000000] ACPI: FACS afe61000 00040 [ 0.000000] ACPI: HPET afefc000 00038 (v01 HP 30F2 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC afefb000 00084 (v02 HP 30F2 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG afefa000 0003C (v01 HP 30F2 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT afeef000 00028 (v01 HP 30F2 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC afeee000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT afeed000 00386 (v01 AMD PowerNow 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1927MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd188] BRK ==> [00008da000 - 00008dd188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 00010771b2] NEW RAMDISK ==> [00008de000 - 00010771b2] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000aff00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afd70 [ 0.000000] 0: 0x000afdbf -> 0x000afe58 [ 0.000000] 0: 0x000afebf -> 0x000afeed [ 0.000000] 0: 0x000afeff -> 0x000aff00 [ 0.000000] On node 0 totalpages: 720339 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3855 pages used for memmap [ 0.000000] HighMem zone: 489259 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714708 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=8cf4c7e1-158e-4f5d-91e0-fd7a7d2271a1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 14412800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000aff00) [ 0.000000] Memory: 2826584k/2882560k available (4673k kernel code, 53536k reserved, 2121k data, 656k init, 1972456k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.152 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3998.30 BogoMIPS (lpj=7996608) [ 0.004052] Security Framework initialized [ 0.004085] AppArmor: AppArmor initialized [ 0.004099] Mount-cache hash table entries: 512 [ 0.004307] Initializing cgroup subsys ns [ 0.004313] Initializing cgroup subsys cpuacct [ 0.004322] Initializing cgroup subsys memory [ 0.004334] Initializing cgroup subsys devices [ 0.004339] Initializing cgroup subsys freezer [ 0.004344] Initializing cgroup subsys net_cls [ 0.004375] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004381] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004385] CPU: Physical Processor ID: 0 [ 0.004389] CPU: Processor Core ID: 0 [ 0.004395] mce: CPU supports 5 MCE banks [ 0.004419] Performance Events: AMD PMU driver. [ 0.004431] ... version: 0 [ 0.004435] ... bit width: 48 [ 0.004439] ... generic registers: 4 [ 0.004443] ... value mask: 0000ffffffffffff [ 0.004448] ... max period: 00007fffffffffff [ 0.004452] ... fixed-purpose events: 0 [ 0.004456] ... event mask: 000000000000000f [ 0.004463] Checking 'hlt' instruction... OK. [ 0.024983] ACPI: Core revision 20090903 [ 0.048038] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048055] ftrace: allocating 21771 entries in 43 pages [ 0.052138] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.052520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092955] CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-70 stepping 01 [ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.180066] CPU1: AMD Turion(tm) X2 Dual-Core Mobile RM-70 stepping 01 [ 0.180122] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.184001] Measured 195492461 cycles TSC warp between CPUs, turning off TSC clock. [ 0.184001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.184019] Brought up 2 CPUs [ 0.184025] Total of 2 processors activated (7988.39 BogoMIPS). [ 0.184252] CPU0 attaching sched-domain: [ 0.184259] domain 0: span 0-1 level MC [ 0.184265] groups: 0 1 [ 0.184277] CPU1 attaching sched-domain: [ 0.184283] domain 0: span 0-1 level MC [ 0.184288] groups: 1 0 [ 0.184443] devtmpfs: initialized [ 0.184443] regulator: core version 0.5 [ 0.184443] Time: 10:49:12 Date: 10/12/10 [ 0.184443] NET: Registered protocol family 16 [ 0.184443] Trying to unpack rootfs image as initramfs... [ 0.184444] EISA bus registered [ 0.184460] ACPI: bus type pci registered [ 0.184613] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.184621] PCI: MCFG area at e0000000 reserved in E820 [ 0.184626] PCI: Using MMCONFIG for extended config space [ 0.184631] PCI: Using configuration type 1 for base access [ 0.188197] bio: create slab at 0 [ 0.190177] ACPI: EC: Look up EC in DSDT [ 0.193198] ACPI: Executed 1 blocks of module-level executable AML code [ 0.199385] ACPI: BIOS _OSI(Linux) query ignored [ 0.211145] ACPI: Interpreter enabled [ 0.211145] ACPI: (supports S0 S3 S4 S5) [ 0.211145] ACPI: Using IOAPIC for interrupt routing [ 0.228123] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.228646] ACPI: No dock devices found. [ 0.230560] _OSC request failed [ 0.230566] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.230837] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.230845] pci 0000:00:04.0: PME# disabled [ 0.230919] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.230925] pci 0000:00:05.0: PME# disabled [ 0.230998] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.231005] pci 0000:00:06.0: PME# disabled [ 0.231124] pci 0000:00:11.0: reg 10 io port: [0x6038-0x603f] [ 0.231136] pci 0000:00:11.0: reg 14 io port: [0x604c-0x604f] [ 0.231148] pci 0000:00:11.0: reg 18 io port: [0x6030-0x6037] [ 0.231160] pci 0000:00:11.0: reg 1c io port: [0x6048-0x604b] [ 0.231172] pci 0000:00:11.0: reg 20 io port: [0x6010-0x601f] [ 0.231184] pci 0000:00:11.0: reg 24 32bit mmio: [0xd2408000-0xd24083ff] [ 0.231262] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2407000-0xd2407fff] [ 0.231343] pci 0000:00:12.1: reg 10 32bit mmio: [0xd2406000-0xd2406fff] [ 0.231447] pci 0000:00:12.2: reg 10 32bit mmio: [0xd2408500-0xd24085ff] [ 0.231521] pci 0000:00:12.2: supports D1 D2 [ 0.231526] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.231534] pci 0000:00:12.2: PME# disabled [ 0.231582] pci 0000:00:13.0: reg 10 32bit mmio: [0xd2405000-0xd2405fff] [ 0.231662] pci 0000:00:13.1: reg 10 32bit mmio: [0xd2404000-0xd2404fff] [ 0.231767] pci 0000:00:13.2: reg 10 32bit mmio: [0xd2408400-0xd24084ff] [ 0.231842] pci 0000:00:13.2: supports D1 D2 [ 0.231846] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.231854] pci 0000:00:13.2: PME# disabled [ 0.232043] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.232055] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.232067] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.232079] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.232091] pci 0000:00:14.1: reg 20 io port: [0x6000-0x600f] [ 0.232187] pci 0000:00:14.2: reg 10 64bit mmio: [0xd2400000-0xd2403fff] [ 0.232249] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.232257] pci 0000:00:14.2: PME# disabled [ 0.232688] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.232697] pci 0000:01:05.0: reg 14 io port: [0x5000-0x50ff] [ 0.232707] pci 0000:01:05.0: reg 18 32bit mmio: [0xd2300000-0xd230ffff] [ 0.232723] pci 0000:01:05.0: reg 24 32bit mmio: [0xd2200000-0xd22fffff] [ 0.232749] pci 0000:01:05.0: supports D1 D2 [ 0.232789] pci 0000:01:05.1: reg 10 32bit mmio: [0xd2310000-0xd2313fff] [ 0.232832] pci 0000:01:05.1: supports D1 D2 [ 0.232908] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff] [ 0.232915] pci 0000:00:01.0: bridge 32bit mmio: [0xd2200000-0xd23fffff] [ 0.232924] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.232995] pci 0000:00:04.0: bridge io port: [0x3000-0x4fff] [ 0.233002] pci 0000:00:04.0: bridge 32bit mmio: [0xd1200000-0xd21fffff] [ 0.233011] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff] [ 0.233073] pci 0000:08:00.0: reg 10 64bit mmio: [0xd1100000-0xd110ffff] [ 0.233259] pci 0000:00:05.0: bridge 32bit mmio: [0xd1100000-0xd11fffff] [ 0.233318] pci 0000:09:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.233343] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xd1010000-0xd1010fff] [ 0.233361] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xd1000000-0xd100ffff] [ 0.233373] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff] [ 0.233418] pci 0000:09:00.0: supports D1 D2 [ 0.233423] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.233430] pci 0000:09:00.0: PME# disabled [ 0.233517] pci 0000:00:06.0: bridge io port: [0x2000-0x2fff] [ 0.233528] pci 0000:00:06.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff] [ 0.233608] pci 0000:00:14.4: transparent bridge [ 0.233616] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] [ 0.233650] pci_bus 0000:00: on NUMA node 0 [ 0.233663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.234180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.234339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.234516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.234670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.234924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.235269] _OSC request failed [ 0.262309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.262583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.262855] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.263160] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.263430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.263733] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.263970] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.264293] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.264537] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.264548] vgaarb: loaded [ 0.264760] SCSI subsystem initialized [ 0.276129] libata version 3.00 loaded. [ 0.276232] usbcore: registered new interface driver usbfs [ 0.276257] usbcore: registered new interface driver hub [ 0.276306] usbcore: registered new device driver usb [ 0.276618] ACPI: WMI: Mapper loaded [ 0.276622] PCI: Using ACPI for IRQ routing [ 0.276967] NetLabel: Initializing [ 0.276972] NetLabel: domain hash size = 128 [ 0.276976] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.277001] NetLabel: unlabeled traffic allowed by default [ 0.277093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.277106] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.279122] Switching to clocksource hpet [ 0.279576] AppArmor: AppArmor Filesystem Enabled [ 0.279606] pnp: PnP ACPI init [ 0.279634] ACPI: bus type pnp registered [ 0.283955] alloc irq_desc for 23 on node -1 [ 0.283960] alloc kstat_irqs on node -1 [ 0.285781] pnp: PnP ACPI: found 13 devices [ 0.285785] ACPI: ACPI bus type pnp unregistered [ 0.285791] PnPBIOS: Disabled by ACPI PNP [ 0.285816] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.285823] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.285840] system 00:09: ioport range 0x400-0x4cf has been reserved [ 0.285847] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.285854] system 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 0.285860] system 00:09: ioport range 0x680-0x6ff has been reserved [ 0.285866] system 00:09: ioport range 0x77a-0x77a has been reserved [ 0.285873] system 00:09: ioport range 0xc00-0xc01 has been reserved [ 0.285879] system 00:09: ioport range 0xc14-0xc14 has been reserved [ 0.285886] system 00:09: ioport range 0xc50-0xc52 has been reserved [ 0.285892] system 00:09: ioport range 0xc6c-0xc6c has been reserved [ 0.285899] system 00:09: ioport range 0xc6f-0xc6f has been reserved [ 0.285905] system 00:09: ioport range 0xcd0-0xcdb has been reserved [ 0.285917] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved [ 0.285924] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.321083] pci 0000:09:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] [ 0.321133] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.321139] pci 0000:00:01.0: IO window: 0x5000-0x5fff [ 0.321147] pci 0000:00:01.0: MEM window: 0xd2200000-0xd23fffff [ 0.321155] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.321164] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.321170] pci 0000:00:04.0: IO window: 0x3000-0x4fff [ 0.321178] pci 0000:00:04.0: MEM window: 0xd1200000-0xd21fffff [ 0.321185] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff [ 0.321194] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 [ 0.321199] pci 0000:00:05.0: IO window: disabled [ 0.321206] pci 0000:00:05.0: MEM window: 0xd1100000-0xd11fffff [ 0.321212] pci 0000:00:05.0: PREFETCH window: disabled [ 0.321222] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 [ 0.321228] pci 0000:00:06.0: IO window: 0x2000-0x2fff [ 0.321236] pci 0000:00:06.0: MEM window: 0xb0000000-0xb00fffff [ 0.321243] pci 0000:00:06.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff [ 0.321252] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 [ 0.321259] pci 0000:00:14.4: IO window: 0x1000-0x1fff [ 0.321268] pci 0000:00:14.4: MEM window: disabled [ 0.321275] pci 0000:00:14.4: PREFETCH window: disabled [ 0.321294] pci 0000:00:01.0: setting latency timer to 64 [ 0.321308] alloc irq_desc for 16 on node -1 [ 0.321312] alloc kstat_irqs on node -1 [ 0.321322] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.321329] pci 0000:00:04.0: setting latency timer to 64 [ 0.321340] alloc irq_desc for 17 on node -1 [ 0.321343] alloc kstat_irqs on node -1 [ 0.321351] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.321358] pci 0000:00:05.0: setting latency timer to 64 [ 0.321369] alloc irq_desc for 18 on node -1 [ 0.321372] alloc kstat_irqs on node -1 [ 0.321380] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.321387] pci 0000:00:06.0: setting latency timer to 64 [ 0.321400] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.321406] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.321412] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] [ 0.321418] pci_bus 0000:01: resource 1 mem: [0xd2200000-0xd23fffff] [ 0.321424] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.321430] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff] [ 0.321435] pci_bus 0000:02: resource 1 mem: [0xd1200000-0xd21fffff] [ 0.321441] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd0ffffff] [ 0.321448] pci_bus 0000:08: resource 1 mem: [0xd1100000-0xd11fffff] [ 0.321454] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] [ 0.321459] pci_bus 0000:09: resource 1 mem: [0xb0000000-0xb00fffff] [ 0.321465] pci_bus 0000:09: resource 2 pref mem [0xd1000000-0xd10fffff] [ 0.321472] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff] [ 0.321477] pci_bus 0000:80: resource 3 io: [0x00-0xffff] [ 0.321483] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffff] [ 0.321549] NET: Registered protocol family 2 [ 0.321732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.322368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.323442] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.323975] TCP: Hash tables configured (established 131072 bind 65536) [ 0.323980] TCP reno registered [ 0.324215] NET: Registered protocol family 1 [ 0.490566] Freeing initrd memory: 7780k freed [ 0.500122] pci 0000:01:05.0: Boot video device [ 0.500214] Simple Boot Flag at 0x44 set to 0x1 [ 0.500569] cpufreq-nforce2: No nForce2 chipset. [ 0.500619] Scanning for low memory corruption every 60 seconds [ 0.500833] audit: initializing netlink socket (disabled) [ 0.500854] type=2000 audit(1286880552.500:1): initialized [ 0.521596] highmem bounce pool size: 64 pages [ 0.521607] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.524614] VFS: Disk quotas dquot_6.5.2 [ 0.524736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.525895] fuse init (API version 7.13) [ 0.526062] msgmni has been set to 1685 [ 0.526562] alg: No test for stdrng (krng) [ 0.526669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.526677] io scheduler noop registered [ 0.526682] io scheduler anticipatory registered [ 0.526687] io scheduler deadline registered [ 0.526766] io scheduler cfq registered (default) [ 0.527046] alloc irq_desc for 25 on node -1 [ 0.527052] alloc kstat_irqs on node -1 [ 0.527069] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.527081] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.527254] alloc irq_desc for 26 on node -1 [ 0.527259] alloc kstat_irqs on node -1 [ 0.527270] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 0.527281] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.527425] alloc irq_desc for 27 on node -1 [ 0.527430] alloc kstat_irqs on node -1 [ 0.527440] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 0.527451] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.527576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.527802] _OSC request failed [ 0.528072] _OSC request failed [ 0.528112] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.528989] ACPI: AC Adapter [ACAD] (on-line) [ 0.529137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.529146] ACPI: Power Button [PWRB] [ 0.529232] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.529239] ACPI: Sleep Button [SLPB] [ 0.529360] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.529808] ACPI: Lid Switch [LID] [ 0.529899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.529907] ACPI: Power Button [PWRF] [ 0.530616] processor LNXCPU:00: registered as cooling_device0 [ 0.530682] processor LNXCPU:01: registered as cooling_device1 [ 0.536387] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386) [ 0.536711] isapnp: Scanning for PnP cards... [ 0.539581] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.542252] brd: module loaded [ 0.543193] loop: module loaded [ 0.543370] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.543645] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.543741] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.544401] Fixed MDIO Bus: probed [ 0.544467] PPP generic driver version 2.4.2 [ 0.544538] tun: Universal TUN/TAP device driver, 1.6 [ 0.544543] tun: (C) 1999-2004 Max Krasnyansky [ 0.544698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.544765] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.544791] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.544798] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.544862] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.544941] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.544963] ehci_hcd 0000:00:12.2: debug port 1 [ 0.545003] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2408500 [ 0.556062] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.556231] usb usb1: configuration #1 chosen from 1 choice [ 0.556288] hub 1-0:1.0: USB hub found [ 0.556305] hub 1-0:1.0: 6 ports detected [ 0.556472] alloc irq_desc for 19 on node -1 [ 0.556477] alloc kstat_irqs on node -1 [ 0.556489] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.556509] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.556516] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.556580] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.556652] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.556674] ehci_hcd 0000:00:13.2: debug port 1 [ 0.556705] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2408400 [ 0.568117] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.568268] usb usb2: configuration #1 chosen from 1 choice [ 0.568322] hub 2-0:1.0: USB hub found [ 0.568337] hub 2-0:1.0: 6 ports detected [ 0.568512] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.568569] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.568587] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.568594] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.568808] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.568897] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2407000 [ 0.573348] ACPI: Battery Slot [BAT0] (battery present) [ 0.628189] usb usb3: configuration #1 chosen from 1 choice [ 0.628247] hub 3-0:1.0: USB hub found [ 0.628298] hub 3-0:1.0: 3 ports detected [ 0.628423] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.628443] ohci_hcd 0000:00:12.1: setting latency timer to 64 [ 0.628450] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.628529] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 0.628556] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2406000 [ 0.688195] usb usb4: configuration #1 chosen from 1 choice [ 0.688253] hub 4-0:1.0: USB hub found [ 0.688303] hub 4-0:1.0: 3 ports detected [ 0.688388] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.688406] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.688414] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.688488] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.688561] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2405000 [ 0.748195] usb usb5: configuration #1 chosen from 1 choice [ 0.748249] hub 5-0:1.0: USB hub found [ 0.748299] hub 5-0:1.0: 3 ports detected [ 0.748383] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.748402] ohci_hcd 0000:00:13.1: setting latency timer to 64 [ 0.748410] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.748476] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 0.748542] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2404000 [ 0.808193] usb usb6: configuration #1 chosen from 1 choice [ 0.808247] hub 6-0:1.0: USB hub found [ 0.808297] hub 6-0:1.0: 3 ports detected [ 0.808430] uhci_hcd: USB Universal Host Controller Interface driver [ 0.808582] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.829697] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.829711] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.829949] mice: PS/2 mouse device common for all mice [ 0.830892] rtc_cmos 00:05: RTC can wake from S4 [ 0.830965] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.831033] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.831222] device-mapper: uevent: version 1.0.3 [ 0.831469] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.831641] device-mapper: multipath: version 1.1.0 loaded [ 0.831646] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.831898] EISA: Probing bus 0 at eisa.0 [ 0.831944] Cannot allocate resource for EISA slot 1 [ 0.831949] Cannot allocate resource for EISA slot 2 [ 0.831955] Cannot allocate resource for EISA slot 3 [ 0.831960] Cannot allocate resource for EISA slot 4 [ 0.831965] Cannot allocate resource for EISA slot 5 [ 0.831971] Cannot allocate resource for EISA slot 6 [ 0.831987] EISA: Detected 0 cards. [ 0.832164] cpuidle: using governor ladder [ 0.832169] cpuidle: using governor menu [ 0.833041] TCP cubic registered [ 0.833341] NET: Registered protocol family 10 [ 0.834257] lo: Disabled Privacy Extensions [ 0.834903] NET: Registered protocol family 17 [ 0.834962] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-70 processors (2 cpu cores) (version 2.20.00) [ 0.835040] powernow-k8: 0 : pstate 0 (2000 MHz) [ 0.835046] powernow-k8: 1 : pstate 1 (1000 MHz) [ 0.835052] powernow-k8: 2 : pstate 2 (500 MHz) [ 0.851540] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.871687] Using IPI No-Shortcut mode [ 0.871799] PM: Resume from disk failed. [ 0.871814] registered taskstats version 1 [ 0.872266] Magic number: 14:771:830 [ 0.872320] acpi PNP0C32:00: hash matches [ 0.872410] rtc_cmos 00:05: setting system clock to 2010-10-12 10:49:13 UTC (1286880553) [ 0.872414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.872417] EDD information not available. [ 0.919641] isapnp: No Plug & Play device found [ 0.919659] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.919680] Freeing unused kernel memory: 656k freed [ 0.920163] Write protecting the kernel text: 4676k [ 0.920204] Write protecting the kernel read-only data: 1840k [ 0.940841] udev: starting version 151 [ 1.041163] scsi0 : pata_atiixp [ 1.049943] usb 1-2: configuration #1 chosen from 1 choice [ 1.054692] scsi1 : pata_atiixp [ 1.055788] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14 [ 1.055791] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15 [ 1.070445] ahci 0000:00:11.0: version 3.0 [ 1.070502] alloc irq_desc for 22 on node -1 [ 1.070505] alloc kstat_irqs on node -1 [ 1.070513] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.070629] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 1.070633] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio ccc [ 1.087655] scsi2 : ahci [ 1.106109] scsi3 : ahci [ 1.110659] scsi4 : ahci [ 1.110784] ata3: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408100 irq 22 [ 1.110790] ata4: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22 [ 1.110795] ata5: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408200 irq 22 [ 1.122584] Initializing USB Mass Storage driver... [ 1.122781] scsi5 : SCSI emulation for USB Mass Storage devices [ 1.122886] usbcore: registered new interface driver usb-storage [ 1.122889] USB Mass Storage support registered. [ 1.122896] usb-storage: device found at 2 [ 1.122899] usb-storage: waiting for device to settle before scanning [ 1.160064] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.311674] usb 1-3: configuration #1 chosen from 1 choice [ 1.424056] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.440073] ata5: SATA link down (SStatus 0 SControl 300) [ 1.567136] usb 1-4: configuration #1 chosen from 1 choice [ 1.571883] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.572029] usb-storage: device found at 4 [ 1.572031] usb-storage: waiting for device to settle before scanning [ 1.596055] ata3: softreset failed (device not ready) [ 1.596059] ata3: applying SB600 PMP SRST workaround and retrying [ 1.760066] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.760615] ata3.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100 [ 1.760619] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.761313] ata3.00: configured for UDMA/100 [ 1.761441] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5 [ 1.761624] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.761700] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.761748] sd 2:0:0:0: [sda] Write Protect is off [ 1.761751] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.761776] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.761925] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.835252] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.000055] ata4: softreset failed (device not ready) [ 2.000059] ata4: applying SB600 PMP SRST workaround and retrying [ 2.164055] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.166276] ata4.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100 [ 2.168670] ata4.00: configured for UDMA/100 [ 2.169971] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.83 PQ: 0 ANSI: 5 [ 2.172777] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.172782] Uniform CD-ROM driver Revision: 3.20 [ 2.172886] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.172954] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.176425] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.176448] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.176488] r8169 0000:09:00.0: setting latency timer to 64 [ 2.176563] alloc irq_desc for 28 on node -1 [ 2.176566] alloc kstat_irqs on node -1 [ 2.176580] r8169 0000:09:00.0: irq 28 for MSI/MSI-X [ 2.179166] eth0: RTL8102e at 0xf80d6000, 00:1e:68:90:c2:05, XID 14a00000 IRQ 28 [ 3.057894] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 6.120239] usb-storage: device scan complete [ 6.120697] scsi 5:0:0:0: Direct-Access Toshiba External USB HDD 1.03 PQ: 0 ANSI: 4 [ 6.121250] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 6.122424] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 6.123174] sd 5:0:0:0: [sdb] Write Protect is off [ 6.123178] sd 5:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 6.123181] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.124668] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.124671] sdb: sdb1 [ 6.477124] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 6.477129] sd 5:0:0:0: [sdb] Attached SCSI disk [ 6.572421] usb-storage: device scan complete [ 6.574382] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.574881] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.579106] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 19.997841] udev: starting version 151 [ 20.037217] Adding 337324k swap on /dev/sda6. Priority:-1 extents:1 across:337324k [ 20.127583] lp: driver loaded but no devices found [ 20.178040] lis3lv02d: laptop model unknown, using default axes configuration [ 20.178781] lis3lv02d: 1-byte sensor found [ 20.180891] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMBI [0xb00-0xb0f] [ 20.180895] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.194437] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 20.194444] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 20.194553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 20.262400] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 20.262511] Registered led device: hp::hddprotect [ 20.262535] lis3lv02d driver loaded. [ 20.357416] lirc_dev: IR Remote Control driver registered, major 61 [ 20.358858] lirc_dev: lirc_register_driver: sample_rate: 0 [ 20.359017] enecir: KB3926C detected, driver support is not complete! [ 20.359021] enecir: chip is 0x3926 - 0x00, 0xc0 [ 20.359029] enecir: hardware features: [ 20.359032] enecir: learning and tx off, gpio40_learn off, fan_in off [ 20.359034] enecir: driver has been succesfully loaded [ 20.366678] acpi device:03: registered as cooling_device2 [ 20.366842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7 [ 20.366905] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 20.368433] Linux video capture interface: v2.00 [ 20.372119] cfg80211: Calling CRDA to update world regulatory domain [ 20.372926] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba) [ 20.385771] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input8 [ 20.386144] usbcore: registered new interface driver uvcvideo [ 20.386198] USB Video Class driver (v0.1.0) [ 20.418609] cfg80211: World regulatory domain updated: [ 20.418614] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.418618] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.418622] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.418625] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.418628] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.418631] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.419674] vga16fb: initializing [ 20.419680] vga16fb: mapped to 0xc00a0000 [ 20.419849] fb0: VGA16 VGA frame buffer device [ 20.452087] ath5k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.452101] ath5k 0000:08:00.0: setting latency timer to 64 [ 20.452142] ath5k 0000:08:00.0: registered as 'phy0' [ 20.486811] type=1505 audit(1286905773.112:2): operation="profile_load" pid=723 name="/sbin/dhclient3" [ 20.487101] type=1505 audit(1286905773.112:3): operation="profile_load" pid=723 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.487288] type=1505 audit(1286905773.112:4): operation="profile_load" pid=723 name="/usr/lib/connman/scripts/dhclient-script" [ 20.692629] Linux agpgart interface v0.103 [ 20.700574] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.700580] Disabling lock debugging due to kernel taint [ 20.852359] [fglrx] Maximum main memory to use for locked dma buffers: 2628 MBytes. [ 20.852390] [fglrx] vendor: 1002 device: 9612 count: 1 [ 20.852840] [fglrx] ioport: bar 1, base 0x5000, size: 0x100 [ 20.852873] pci 0000:01:05.0: power state changed by ACPI to D0 [ 20.852884] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 20.852890] pci 0000:01:05.0: setting latency timer to 64 [ 20.853387] [fglrx] Kernel PAT support is enabled [ 20.853417] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 20.989784] ath: EEPROM regdomain: 0x64 [ 20.989787] ath: EEPROM indicates we should expect a direct regpair map [ 20.989792] ath: Country alpha2 being used: 00 [ 20.989794] ath: Regpair used: 0x64 [ 21.019451] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.019563] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 21.025788] phy0: Selected rate control algorithm 'minstrel' [ 21.026555] Registered led device: ath5k-phy0::rx [ 21.026574] Registered led device: ath5k-phy0::tx [ 21.026578] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 21.047403] Console: switching to colour frame buffer device 80x30 [ 21.146938] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9 [ 21.170270] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 21.170376] input: HDA ATI SB Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 21.170442] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 21.171347] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 21.171377] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 21.409140] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000 [ 21.492967] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13 [ 1634.133186] type=1505 audit(1286907386.760:5): operation="profile_load" pid=971 name="/usr/share/gdm/guest-session/Xsession" [ 1634.144453] type=1505 audit(1286907386.768:6): operation="profile_replace" pid=1035 name="/sbin/dhclient3" [ 1634.144757] type=1505 audit(1286907386.772:7): operation="profile_replace" pid=1035 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 1634.144924] type=1505 audit(1286907386.772:8): operation="profile_replace" pid=1035 name="/usr/lib/connman/scripts/dhclient-script" [ 1634.154667] type=1505 audit(1286907386.780:9): operation="profile_load" pid=1038 name="/usr/bin/evince" [ 1634.170407] type=1505 audit(1286907386.796:10): operation="profile_load" pid=1038 name="/usr/bin/evince-previewer" [ 1634.173246] type=1505 audit(1286907386.800:11): operation="profile_load" pid=1038 name="/usr/bin/evince-thumbnailer" [ 1634.190078] type=1505 audit(1286907386.816:12): operation="profile_load" pid=1042 name="/usr/lib/cups/backend/cups-pdf" [ 1634.190446] type=1505 audit(1286907386.816:13): operation="profile_load" pid=1042 name="/usr/sbin/cupsd" [ 1634.196183] type=1505 audit(1286907386.820:14): operation="profile_load" pid=1043 name="/usr/sbin/mysqld" [ 1634.239397] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1634.250542] r8169: eth0: link down [ 1634.250769] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1635.900415] [fglrx] GART Table is not in FRAME_BUFFER range [ 1635.967457] ppdev: user-space parallel port driver [ 1636.027990] alloc irq_desc for 29 on node -1 [ 1636.027994] alloc kstat_irqs on node -1 [ 1636.028079] fglrx_pci 0000:01:05.0: irq 29 for MSI/MSI-X [ 1636.031505] [fglrx] Firegl kernel thread PID: 1326 [ 1636.031894] [fglrx] IRQ 29 Enabled [ 1636.135430] CPU0 attaching NULL sched-domain. [ 1636.135438] CPU1 attaching NULL sched-domain. [ 1636.160619] CPU0 attaching sched-domain: [ 1636.160624] domain 0: span 0-1 level MC [ 1636.160627] groups: 0 1 [ 1636.160633] CPU1 attaching sched-domain: [ 1636.160635] domain 0: span 0-1 level MC [ 1636.160638] groups: 1 0 [ 1636.308239] [fglrx] Gart USWC size:864 M. [ 1636.308244] [fglrx] Gart cacheable size:342 M. [ 1636.308250] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 1636.308253] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 1638.644518] CPU0 attaching NULL sched-domain. [ 1638.644526] CPU1 attaching NULL sched-domain. [ 1638.672113] CPU0 attaching sched-domain: [ 1638.672118] domain 0: span 0-1 level MC [ 1638.672121] groups: 0 1 [ 1638.672127] CPU1 attaching sched-domain: [ 1638.672130] domain 0: span 0-1 level MC [ 1638.672132] groups: 1 0 [ 1639.238062] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 2426.024579] wlan0: direct probe to AP 00:1c:f0:0f:da:a4 (try 1) [ 2426.024613] wlan0: deauthenticating from 00:1c:f0:0f:da:a4 by local choice (reason=3) [ 2426.024671] wlan0: direct probe to AP 00:1c:f0:0f:da:a4 (try 1) [ 2426.028056] wlan0: direct probe responded [ 2426.028062] wlan0: authenticate with AP 00:1c:f0:0f:da:a4 (try 1) [ 2426.031223] wlan0: authenticated [ 2426.031259] wlan0: associate with AP 00:1c:f0:0f:da:a4 (try 1) [ 2426.033438] wlan0: RX AssocResp from 00:1c:f0:0f:da:a4 (capab=0x431 status=0 aid=102) [ 2426.033442] wlan0: associated [ 2426.034167] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2426.097538] padlock: VIA PadLock not detected. [ 2436.936023] wlan0: no IPv6 routers present [ 2485.988359] UDF-fs: No VRS found [ 2485.988368] UDF-fs: No partition found (1) [ 2486.084171] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2486.126301] ISO 9660 Extensions: RRIP_1991A [ 2486.343595] __ratelimit: 6 callbacks suppressed [ 2486.343601] gvfsd-metadata[3252]: segfault at 8 ip 0804d35a sp bfc29540 error 4 in gvfsd-metadata[8048000+c000]