This bug has been produced on my system with both
Xubuntu 6.10 Beta and Ubuntu 6.10 Beta.
When installing with the livecd installer, at the hardware
detection step, the loading of the usb-storage module takes
forever (i.e. it does not seem to be loading). I can still
continue to use the livecd as normal. However plugging
in usb devices does not work.
This is a Compaq Presario SR1617.
(Booting with -noapic or -nolapic is not an option for me)
I have included (in order) the output of:
-lspci
-dmesg
-cat /proc/version
#######################LSPCI##########
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0162 (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
############################DMESG######
[17179569.184000] Linux version 2.6.17-10-generic (root@palmer) (gcc version 4.1.2 20060920 (prerelease) (Ubuntu 4.1.1-13ubuntu3)) #2 SMP Tue Sep 26 16:53:47 UTC 2006 (Ubuntu 2.6.17-10.24-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[17179569.184000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 126MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f46e0
[17179569.184000] On node 0 totalpages: 261872
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32496 pages, LIFO batch:7
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v000 HP-CPC ) @ 0x000f8600
[17179569.184000] ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040
[17179569.184000] ACPI: FADT (v002 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0
[17179569.184000] ACPI: SSDT (v001 HP-CPC POWERNOW 0x00000001 LTP 0x00000001) @ 0x3fef6f40
[17179569.184000] ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef7080
[17179569.184000] ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef6e80
[17179569.184000] ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:15 APIC version 16
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- vga=0x318
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2189.244 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour dummy device 80x25
[17179572.640000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.640000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.656000] Memory: 1026692k/1047488k available (1894k kernel code, 20204k reserved, 1098k data, 308k init, 129984k highmem)
[17179572.656000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.736000] Calibrating delay using timer specific routine.. 4384.72 BogoMIPS (lpj=8769457)
[17179572.736000] Security Framework v1.0.0 initialized
[17179572.736000] SELinux: Disabled at boot.
[17179572.736000] Mount-cache hash table entries: 512
[17179572.736000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179572.736000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179572.736000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179572.736000] CPU: L2 Cache: 512K (64 bytes/line)
[17179572.736000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179572.736000] Checking 'hlt' instruction... OK.
[17179572.752000] SMP alternatives: switching to UP code
[17179572.752000] Freeing SMP alternatives: 16k freed
[17179572.752000] checking if image is initramfs... it is
[17179573.304000] Freeing initrd memory: 7412k freed
[17179573.304000] ACPI: Core revision 20060707
[17179573.316000] ACPI: Looking for DSDT ... not found!
[17179573.316000] ACPI: System reset via FADT Reset Register is supported
[17179573.316000] machine_reset = acpi_machine_reset
[17179573.320000] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 02
[17179573.320000] Total of 1 processors activated (4384.72 BogoMIPS).
[17179573.320000] ENABLING IO-APIC IRQs
[17179573.320000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.320000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[17179573.320000] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[17179573.320000] ...trying to set up timer as Virtual Wire IRQ... works.
[17179573.504000] Brought up 1 CPUs
[17179573.504000] migration_cost=0
[17179573.504000] NET: Registered protocol family 16
[17179573.504000] EISA bus registered
[17179573.504000] ACPI: bus type pci registered
[17179573.504000] PCI: Using MMCONFIG
[17179573.504000] PCI: No mmconfig possible on 0:18
[17179573.504000] Setting up standard PCI resources
[17179573.516000] ACPI: Interpreter enabled
[17179573.516000] ACPI: Using IOAPIC for interrupt routing
[17179573.516000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.516000] PCI: Probing PCI hardware (bus 00)
[17179573.516000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.520000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179573.520000] Boot video device is 0000:01:00.0
[17179573.520000] PCI: Transparent bridge - 0000:00:14.4
[17179573.520000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.532000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[17179573.532000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[17179573.532000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[17179573.532000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[17179573.532000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[17179573.532000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
[17179573.532000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11), disabled.
[17179573.532000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[17179573.532000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179573.536000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.536000] pnp: PnP ACPI init
[17179573.536000] pnp: PnP ACPI: found 12 devices
[17179573.536000] PnPBIOS: Disabled by ACPI PNP
[17179573.536000] PCI: Using ACPI for IRQ routing
[17179573.536000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.536000] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[17179573.540000] pnp: 00:01: ioport range 0x228-0x22f has been reserved
[17179573.540000] pnp: 00:01: ioport range 0x40b-0x40b has been reserved
[17179573.540000] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
[17179573.540000] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
[17179573.540000] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
[17179573.540000] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
[17179573.540000] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
[17179573.540000] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
[17179573.540000] PCI: Bridge: 0000:00:02.0
[17179573.540000] IO window: e000-efff
[17179573.540000] MEM window: fa000000-fcffffff
[17179573.540000] PREFETCH window: d0000000-dfffffff
[17179573.540000] PCI: Bridge: 0000:00:14.4
[17179573.540000] IO window: d000-dfff
[17179573.540000] MEM window: fde00000-fdefffff
[17179573.540000] PREFETCH window: fdd00000-fddfffff
[17179573.540000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179573.540000] NET: Registered protocol family 2
[17179573.572000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.572000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179573.572000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.572000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.572000] TCP reno registered
[17179573.572000] audit: initializing netlink socket (disabled)
[17179573.572000] audit(1160500962.572:1): initialized
[17179573.572000] highmem bounce pool size: 64 pages
[17179573.572000] VFS: Disk quotas dquot_6.5.1
[17179573.572000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.572000] Initializing Cryptographic API
[17179573.572000] io scheduler noop registered
[17179573.572000] io scheduler anticipatory registered
[17179573.572000] io scheduler deadline registered
[17179573.572000] io scheduler cfq registered (default)
[17179573.572000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179573.572000] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[17179573.572000] assign_interrupt_mode Found MSI capability
[17179573.572000] Allocate Port Service[0000:00:02.0:pcie00]
[17179573.572000] Allocate Port Service[0000:00:02.0:pcie01]
[17179573.572000] Allocate Port Service[0000:00:02.0:pcie03]
[17179573.572000] isapnp: Scanning for PnP cards...
[17179573.928000] isapnp: No Plug & Play device found
[17179573.944000] Real Time Clock Driver v1.12ac
[17179573.944000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.944000] mice: PS/2 mouse device common for all mice
[17179573.944000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[17179573.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.944000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.492000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.500000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.508000] EISA: Probing bus 0 at eisa.0
[17179574.508000] Cannot allocate resource for EISA slot 4
[17179574.508000] EISA: Detected 0 cards.
[17179574.508000] TCP bic registered
[17179574.508000] NET: Registered protocol family 1
[17179574.508000] NET: Registered protocol family 8
[17179574.508000] NET: Registered protocol family 20
[17179574.508000] Using IPI No-Shortcut mode
[17179574.508000] ACPI: (supports S0 S1 S3 S4 S5)
[17179574.508000] Freeing unused kernel memory: 308k freed
[17179574.552000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.576000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 65536k
[17179574.576000] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[17179574.576000] vesafb: protected mode interface info at c000:d2e0
[17179574.576000] vesafb: scrolling: redraw
[17179574.576000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[17179574.784000] Console: switching to colour frame buffer device 128x48
[17179574.784000] fb0: VESA VGA frame buffer device
[17179575.928000] Capability LSM initialized
[17179575.956000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.956000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179575.956000] ACPI: Getting cpuindex for acpiid 0x1
[17179576.296000] SCSI subsystem initialized
[17179576.300000] libata version 1.20 loaded.
[17179576.300000] sata_sil 0000:00:12.0: version 0.9
[17179576.300000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 193
[17179576.300000] ata1: SATA max UDMA/100 cmd 0xF8842080 ctl 0xF884208A bmdma 0xF8842000 irq 193
[17179576.300000] ata2: SATA max UDMA/100 cmd 0xF88420C0 ctl 0xF88420CA bmdma 0xF8842008 irq 193
[17179576.660000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179576.676000] ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3c01 87:4023 88:203f
[17179576.676000] ata1: dev 0 ATA-7, max UDMA/100, 488397168 sectors: LBA48
[17179576.688000] ata1: dev 0 configured for UDMA/100
[17179576.688000] scsi0 : sata_sil
[17179576.892000] ata2: SATA link down (SStatus 0)
[17179576.904000] scsi1 : sata_sil
[17179576.904000] Vendor: ATA Model: ST3250823AS Rev: 3.03
[17179576.904000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.912000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179576.912000] sda: Write Protect is off
[17179576.912000] sda: Mode Sense: 00 3a 00 00
[17179576.912000] SCSI device sda: drive cache: write back
[17179576.912000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179576.912000] sda: Write Protect is off
[17179576.912000] sda: Mode Sense: 00 3a 00 00
[17179576.912000] SCSI device sda: drive cache: write back
[17179576.912000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[17179576.996000] sd 0:0:0:0: Attached scsi disk sda
[17179577.428000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179577.428000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 201
[17179577.428000] ATIIXP: chipset revision 0
[17179577.428000] ATIIXP: not 100% native mode: will probe irqs later
[17179577.428000] ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:pio, hdb:pio
[17179577.428000] ide1: BM-DMA at 0xf808-0xf80f, BIOS settings: hdc:pio, hdd:pio
[17179577.428000] Probing IDE interface ide0...
[17179578.172000] hda: TSSTcorpCD/DVDW TS-H552D, ATAPI CD/DVD-ROM drive
[17179578.848000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.860000] Probing IDE interface ide1...
[17179579.440000] hda: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179579.440000] Uniform CD-ROM driver Revision: 3.20
[17179579.500000] Probing IDE interface ide1...
[17179579.528000] usbcore: registered new driver usbfs
[17179579.528000] usbcore: registered new driver hub
[17179579.532000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179579.532000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 209
[17179579.532000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179579.532000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179579.600000] ieee1394: Initialized config rom entry `ip1394'
[17179579.600000] ohci_hcd 0000:00:13.0: irq 209, io mem 0xfe02e000
[17179579.660000] usb usb1: configuration #1 chosen from 1 choice
[17179579.660000] hub 1-0:1.0: USB hub found
[17179579.660000] hub 1-0:1.0: 4 ports detected
[17179579.764000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 209
[17179579.764000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179579.764000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[17179579.952000] APIC error on CPU0: 00(40)
[17179580.092000] APIC error on CPU0: 40(40)
[17179580.268000] irq 209: nobody cared (try booting with the "irqpoll" option)
[17179580.268000] <c01499b4> __report_bad_irq+0x24/0x80 <c0149aad> note_interrupt+0x9d/0x270
[17179580.268000] <f8efd854> usb_hcd_irq+0x24/0x60 [usbcore] <c0149333> handle_IRQ_event+0x33/0x60
[17179580.268000] <c0149458> __do_IRQ+0xf8/0x110 <c0105c89> do_IRQ+0x19/0x30
[17179580.268000] <c010408a> common_interrupt+0x1a/0x20 <c0102080> default_idle+0x0/0x60
[17179580.268000] <c01020aa> default_idle+0x2a/0x60 <c0102122> cpu_idle+0x42/0xb0
[17179580.268000] <c03f47a1> start_kernel+0x321/0x3a0 <c03f4210> unknown_bootoption+0x0/0x270
[17179580.268000] handlers:
[17179580.268000] [<f8efd830>] (usb_hcd_irq+0x0/0x60 [usbcore])
[17179580.268000] Disabling IRQ #209
[17179580.268000] ohci_hcd 0000:00:13.1: irq 209, io mem 0xfe02d000
[17179580.328000] usb usb2: configuration #1 chosen from 1 choice
[17179580.328000] hub 2-0:1.0: USB hub found
[17179580.328000] hub 2-0:1.0: 4 ports detected
[17179580.436000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179580.436000] PCI: Via IRQ fixup for 0000:02:04.0, from 255 to 9
[17179580.488000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[17179580.492000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 209
[17179580.492000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179580.492000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[17179580.492000] ehci_hcd 0000:00:13.2: irq 209, io mem 0xfe02c000
[17179580.492000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.492000] usb usb3: configuration #1 chosen from 1 choice
[17179580.492000] hub 3-0:1.0: USB hub found
[17179580.492000] hub 3-0:1.0: 8 ports detected
[17179580.540000] usb 1-1: new full speed USB device using ohci_hcd and address 2
[17179580.960000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179580.992000] ISO 9660 Extensions: RRIP_1991A
[17179581.028000] Registering unionfs 1.1.4
[17179581.032000] loop: loaded (max 8 devices)
[17179581.152000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[17179581.540000] ohci_hcd 0000:00:13.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[17179581.776000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000ded5e0]
[17179605.876000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179605.880000] 8139cp: pci dev 0000:02:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[17179605.880000] 8139cp: Try the "8139too" driver instead.
[17179605.880000] 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[17179605.880000] 8139cp: Try the "8139too" driver instead.
[17179605.880000] 8139too Fast Ethernet driver 0.9.27
[17179605.880000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179605.880000] eth0: RealTek RTL8139 at 0xf8fea000, 00:08:a1:66:eb:1e, IRQ 217
[17179605.880000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179605.880000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179605.880000] eth1: RealTek RTL8139 at 0xf9000000, 00:13:d3:f3:77:8f, IRQ 217
[17179605.880000] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[17179627.744000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179627.788000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179627.952000] Linux agpgart interface v0.101 (c) Dave Jones
[17179628.348000] input: PC Speaker as /class/input/input1
[17179628.584000] parport: PnPBIOS parport detected.
[17179628.584000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[17179629.004000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[17179629.632000] ts: Compaq touchscreen protocol output
[17179630.276000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179630.484000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 193
[17179630.536000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179630.540000] eth0: link down
[17179631.392000] NET: Registered protocol family 17
[17179633.792000] NET: Registered protocol family 10
[17179633.792000] lo: Disabled Privacy Extensions
[17179633.792000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179633.792000] IPv6 over IPv4 tunneling driver
[17179637.220000] ACPI: Power Button (FF) [PWRF]
[17179637.220000] ACPI: Power Button (CM) [PWRB]
[17179637.356000] ibm_acpi: ec object not found
[17179637.380000] pcc_acpi: loading...
[17179638.072000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179638.072000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 (1400 mV)
[17179638.072000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 (1350 mV)
[17179638.072000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[17179638.072000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179638.072000] cpu_init done, current fid 0xe, vid 0x6
[17179641.188000] lp0: using parport0 (interrupt-driven).
[17179641.968000] ppdev: user-space parallel port driver
[17179644.180000] eth1: no IPv6 routers present
[17179650.616000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179650.616000] apm: overridden by ACPI.
[17179662.224000] Bluetooth: Core ver 2.8
[17179662.224000] NET: Registered protocol family 31
[17179662.224000] Bluetooth: HCI device and connection manager initialized
[17179662.224000] Bluetooth: HCI socket layer initialized
[17179662.528000] Bluetooth: L2CAP ver 2.8
[17179662.528000] Bluetooth: L2CAP socket layer initialized
[17180147.508000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17180147.668000] JFS: nTxBlock = 8083, nTxLock = 64664
[17180147.860000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[17180147.860000] SGI XFS Quota Management subsystem
[17180172.596000] BUG: soft lockup detected on CPU#0!
[17180172.596000] <c01491df> softlockup_tick+0x9f/0xf0 <c012bee1> update_process_times+0x31/0x80
[17180172.596000] <c0114d13> smp_apic_timer_interrupt+0x53/0x60 <c010413c> apic_timer_interrupt+0x1c/0x30
[17180172.596000] <c014e7b1> find_get_pages+0x51/0x60 <c0153c12> pagevec_lookup+0x22/0x30
[17180172.596000] <c0154049> invalidate_mapping_pages+0x49/0xf0 <c0127758> on_each_cpu+0x28/0x40
[17180172.596000] <c01d70d7> blkdev_ioctl+0x267/0x7d0 <c018fe30> mpage_writepages+0x140/0x3e0
[17180172.596000] <c018fe30> mpage_writepages+0x140/0x3e0 <c014b9d6> find_get_pages_tag+0x36/0x80
[17180172.596000] <c015340a> pagevec_lookup_tag+0x2a/0x40 <c014c8be> wait_on_page_writeback_range+0x5e/0x100
[17180172.596000] <c01724c8> block_ioctl+0x18/0x20 <c01724b0> block_ioctl+0x0/0x20
[17180172.596000] <c017d64b> do_ioctl+0x2b/0x90 <c017d70c> vfs_ioctl+0x5c/0x2b0
[17180172.596000] <c017d9d2> sys_ioctl+0x72/0x90 <c0102fbb> sysenter_past_esp+0x54/0x79
[17180187.220000] BUG: soft lockup detected on CPU#0!
[17180187.220000] <c01491df> softlockup_tick+0x9f/0xf0 <c012bee1> update_process_times+0x31/0x80
[17180187.220000] <c0114d13> smp_apic_timer_interrupt+0x53/0x60 <c010413c> apic_timer_interrupt+0x1c/0x30
[17180187.220000] <c015374f> __lru_add_drain+0xf/0x40 <c0153af8> __pagevec_release+0x8/0x20
[17180187.220000] <c01540e3> invalidate_mapping_pages+0xe3/0xf0 <c0127758> on_each_cpu+0x28/0x40
[17180187.220000] <c01d70d7> blkdev_ioctl+0x267/0x7d0 <c018fe30> mpage_writepages+0x140/0x3e0
[17180187.220000] <c018fe30> mpage_writepages+0x140/0x3e0 <c014b9d6> find_get_pages_tag+0x36/0x80
[17180187.220000] <c015340a> pagevec_lookup_tag+0x2a/0x40 <c014c8be> wait_on_page_writeback_range+0x5e/0x100
[17180187.220000] <c01724c8> block_ioctl+0x18/0x20 <c01724b0> block_ioctl+0x0/0x20
[17180187.220000] <c017d64b> do_ioctl+0x2b/0x90 <c017d70c> vfs_ioctl+0x5c/0x2b0
[17180187.220000] <c017d9d2> sys_ioctl+0x72/0x90 <c0102fbb> sysenter_past_esp+0x54/0x79
[17180192.032000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17180192.036000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[17180202.228000] eth0: no IPv6 routers present
[17180204.976000] BUG: soft lockup detected on CPU#0!
[17180204.976000] <c01491df> softlockup_tick+0x9f/0xf0 <c012bee1> update_process_times+0x31/0x80
[17180204.976000] <c0114d13> smp_apic_timer_interrupt+0x53/0x60 <c010413c> apic_timer_interrupt+0x1c/0x30
[17180204.976000] <c014e7b1> find_get_pages+0x51/0x60 <c0153c12> pagevec_lookup+0x22/0x30
[17180204.976000] <c0154049> invalidate_mapping_pages+0x49/0xf0 <c0127758> on_each_cpu+0x28/0x40
[17180204.976000] <c01d70d7> blkdev_ioctl+0x267/0x7d0 <c018fe30> mpage_writepages+0x140/0x3e0
[17180204.976000] <c018fe30> mpage_writepages+0x140/0x3e0 <c014b9d6> find_get_pages_tag+0x36/0x80
[17180204.976000] <c015340a> pagevec_lookup_tag+0x2a/0x40 <c014c8be> wait_on_page_writeback_range+0x5e/0x100
[17180204.976000] <c01724c8> block_ioctl+0x18/0x20 <c01724b0> block_ioctl+0x0/0x20
[17180204.976000] <c017d64b> do_ioctl+0x2b/0x90 <c017d70c> vfs_ioctl+0x5c/0x2b0
[17180204.976000] <c017d9d2> sys_ioctl+0x72/0x90 <c0102fbb> sysenter_past_esp+0x54/0x79
[17180343.004000] Adding 2101640k swap on /dev/sda10. Priority:-1 extents:1 across:2101640k
[17180384.408000] kjournald starting. Commit interval 5 seconds
[17180384.416000] EXT3 FS on sda9, internal journal
[17180384.416000] EXT3-fs: mounted filesystem with ordered data mode.
[17180961.404000] QNX4 filesystem 0.2.3 registered.
[17180961.532000] cramfs: wrong magic
[17180961.548000] Unable to identify CD-ROM format.
[17180961.564000] SQUASHFS error: Can't find a SQUASHFS superblock on sda1
[17180961.568000] VFS: Can't find an ext2 filesystem on dev sda1.
[17180962.300000] cramfs: wrong magic
[17180962.316000] Unable to identify CD-ROM format.
[17180962.324000] SQUASHFS error: Can't find a SQUASHFS superblock on sda2
[17180962.328000] VFS: Can't find an ext2 filesystem on dev sda2.
[17180962.336000] FAT: bogus number of reserved sectors
[17180962.336000] VFS: Can't find a valid FAT filesystem on dev sda2.
[17180962.380000] NTFS volume version 3.1.
[17180962.660000] cramfs: wrong magic
[17180962.664000] attempt to access beyond end of device
[17180962.664000] sda3: rw=0, want=66, limit=2
[17180962.664000] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
[17180962.680000] SQUASHFS error: Can't find a SQUASHFS superblock on sda3
[17180962.688000] attempt to access beyond end of device
[17180962.688000] sda3: rw=0, want=4, limit=2
[17180962.688000] EXT2-fs: unable to read superblock
[17180962.696000] FAT: bogus number of reserved sectors
[17180962.696000] VFS: Can't find a valid FAT filesystem on dev sda3.
[17180962.700000] NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
[17180962.700000] NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[17180962.704000] NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume.
[17180962.708000] attempt to access beyond end of device
[17180962.708000] sda3: rw=0, want=4, limit=2
[17180962.712000] EXT3-fs: unable to read superblock
[17180962.716000] attempt to access beyond end of device
[17180962.716000] sda3: rw=0, want=72, limit=2
[17180962.716000] attempt to access beyond end of device
[17180962.716000] sda3: rw=0, want=128, limit=2
[17180962.724000] attempt to access beyond end of device
[17180962.724000] sda3: rw=0, want=18, limit=2
[17180962.724000] ReiserFS: sda3: warning: sh-2006: read_super_block: bread failed (dev sda3, block 8, size 1024)
[17180962.724000] attempt to access beyond end of device
[17180962.724000] sda3: rw=0, want=130, limit=2
[17180962.724000] ReiserFS: sda3: warning: sh-2006: read_super_block: bread failed (dev sda3, block 64, size 1024)
[17180962.724000] ReiserFS: sda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda3
[17180962.732000] attempt to access beyond end of device
[17180962.732000] sda3: rw=0, want=8, limit=2
[17180962.740000] attempt to access beyond end of device
[17180962.740000] sda3: rw=0, want=68, limit=2
[17180962.740000] attempt to access beyond end of device
[17180962.740000] sda3: rw=0, want=1252, limit=2
[17180962.740000] attempt to access beyond end of device
[17180962.740000] sda3: rw=0, want=1028, limit=2
[17180962.740000] UDF-fs: No partition found (1)
[17180962.748000] FAT: bogus number of reserved sectors
[17180962.748000] VFS: Can't find a valid FAT filesystem on dev sda3.
[17180962.752000] attempt to access beyond end of device
[17180962.752000] sda3: rw=0, want=4, limit=2
[17180962.752000] MINIX-fs: unable to read superblock
[17180962.780000] attempt to access beyond end of device
[17180962.780000] sda3: rw=0, want=3, limit=2
[17180962.780000] hfs: unable to find HFS+ superblock
[17180962.788000] qnx4: wrong fsid in superblock.
[17180962.792000] attempt to access beyond end of device
[17180962.792000] sda3: rw=0, want=3, limit=2
[17180962.796000] hfs: can't find a HFS filesystem on dev sda3.
[17180962.836000] cramfs: wrong magic
[17180962.852000] Unable to identify CD-ROM format.
[17180962.860000] SQUASHFS error: Can't find a SQUASHFS superblock on sda5
[17180962.864000] VFS: Can't find an ext2 filesystem on dev sda5.
[17180963.184000] cramfs: wrong magic
[17180963.204000] Unable to identify CD-ROM format.
[17180963.216000] SQUASHFS error: Can't find a SQUASHFS superblock on sda6
[17180963.224000] EXT2-fs warning (device sda6): ext2_fill_super: mounting ext3 filesystem as ext2
[17180963.432000] cramfs: wrong magic
[17180963.448000] Unable to identify CD-ROM format.
[17180963.456000] SQUASHFS error: Can't find a SQUASHFS superblock on sda7
[17180963.464000] EXT2-fs warning (device sda7): ext2_fill_super: mounting ext3 filesystem as ext2
[17180963.576000] cramfs: wrong magic
[17180963.592000] Unable to identify CD-ROM format.
[17180963.600000] SQUASHFS error: Can't find a SQUASHFS superblock on sda8
[17180963.604000] VFS: Can't find an ext2 filesystem on dev sda8.
#########################CAT /PROC/VERSION#
Linux version 2.6.17-10-generic (root@palmer) (gcc version 4.1.2 20060920 (prerelease) (Ubuntu 4.1.1-13ubuntu3)) #2 SMP Tue Sep 26 16:53:47 UTC 2006 (Ubuntu 2.6.17-10.24-generic)
did you try to boot with "irqpoll" option as suggested by the first OOPS in dmesg?