[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable) [ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fedf800 (usable) [ 0.000000] BIOS-e820: 000000007fedf800 - 000000007fee0000 (reserved) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fedf max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000098400 (usable) [ 0.000000] modified: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fedf800 (usable) [ 0.000000] modified: 000000007fedf800 - 000000007fee0000 (reserved) [ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7f5de000 - 7fecf1e2 [ 0.000000] Allocated new RAMDISK: 008e0000 - 011d11e2 [ 0.000000] Move RAMDISK from 000000007f5de000 - 000000007fecf1e1 to 008e0000 - 011d11e1 [ 0.000000] ACPI: RSDP 000f8350 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 7fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7fee7ac0 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7fee3280 047C1 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 7fee0000 00040 [ 0.000000] ACPI: SLIC 7fee7d00 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 7fee7ec0 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 7fee7f40 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 7fee7c00 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7fee84a0 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [0000098400 - 0000100000] BIOS reserved ==> [0000098400 - 0000100000] [ 0.000000] #5 [00008dc000 - 00008df5e4] BRK ==> [00008dc000 - 00008df5e4] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e0000 - 00011d11e2] NEW RAMDISK ==> [00008e0000 - 00011d11e2] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5ed0] f5ed0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007fedf [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x0007fedf [ 0.000000] On node 0 totalpages: 523879 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c11d3200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3944 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2318 pages used for memmap [ 0.000000] HighMem zone: 294355 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519785 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10479660 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fedf) [ 0.000000] Memory: 2049432k/2095996k available (4679k kernel code, 44928k reserved, 2116k data, 660k init, 1186692k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d43 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d43 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.419 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.83 BogoMIPS (lpj=8001676) [ 0.004023] Security Framework initialized [ 0.004045] AppArmor: AppArmor initialized [ 0.004051] Mount-cache hash table entries: 512 [ 0.004188] Initializing cgroup subsys ns [ 0.004193] Initializing cgroup subsys cpuacct [ 0.004197] Initializing cgroup subsys memory [ 0.004205] Initializing cgroup subsys devices [ 0.004208] Initializing cgroup subsys freezer [ 0.004210] Initializing cgroup subsys net_cls [ 0.004231] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004234] CPU: L2 cache: 2048K [ 0.004237] CPU: Physical Processor ID: 0 [ 0.004239] CPU: Processor Core ID: 0 [ 0.004243] mce: CPU supports 6 MCE banks [ 0.004252] CPU0: Thermal monitoring enabled (TM2) [ 0.004256] using mwait in idle threads. [ 0.004263] Performance Events: Core2 events, Intel PMU driver. [ 0.004272] ... version: 2 [ 0.004273] ... bit width: 40 [ 0.004275] ... generic registers: 2 [ 0.004277] ... value mask: 000000ffffffffff [ 0.004279] ... max period: 000000007fffffff [ 0.004281] ... fixed-purpose events: 3 [ 0.004283] ... event mask: 0000000700000003 [ 0.004287] Checking 'hlt' instruction... OK. [ 0.022809] ACPI: Core revision 20090903 [ 0.032024] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032032] ftrace: allocating 21780 entries in 43 pages [ 0.036059] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077176] CPU0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.164118] CPU1: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 [ 0.164129] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168021] Brought up 2 CPUs [ 0.168024] Total of 2 processors activated (8001.96 BogoMIPS). [ 0.168476] CPU0 attaching sched-domain: [ 0.168480] domain 0: span 0-1 level MC [ 0.168482] groups: 0 1 [ 0.168489] CPU1 attaching sched-domain: [ 0.168491] domain 0: span 0-1 level MC [ 0.168493] groups: 1 0 [ 0.168597] devtmpfs: initialized [ 0.168597] regulator: core version 0.5 [ 0.168597] Time: 19:11:38 Date: 09/28/10 [ 0.168597] NET: Registered protocol family 16 [ 0.168597] Trying to unpack rootfs image as initramfs... [ 0.168597] EISA bus registered [ 0.168597] ACPI: bus type pci registered [ 0.168597] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.168597] PCI: MCFG area at f0000000 reserved in E820 [ 0.168597] PCI: Using MMCONFIG for extended config space [ 0.168597] PCI: Using configuration type 1 for base access [ 0.172101] bio: create slab at 0 [ 0.172898] ACPI: EC: Look up EC in DSDT [ 0.178901] ACPI: Interpreter enabled [ 0.178916] ACPI: (supports S0 S1 S3 S4 S5) [ 0.178947] ACPI: Using IOAPIC for interrupt routing [ 0.183481] ACPI: No dock devices found. [ 0.183576] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.183697] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.183701] pci 0000:00:01.0: PME# disabled [ 0.183769] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.183814] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.183818] pci 0000:00:1b.0: PME# disabled [ 0.183864] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.183916] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.183967] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.184036] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.184085] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.184134] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.184138] pci 0000:00:1d.7: PME# disabled [ 0.184299] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.184306] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.184313] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.184320] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.184327] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f] [ 0.184376] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07] [ 0.184382] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903] [ 0.184388] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807] [ 0.184394] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703] [ 0.184401] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f] [ 0.184407] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.184434] pci 0000:00:1f.2: PME# supported from D3hot [ 0.184438] pci 0000:00:1f.2: PME# disabled [ 0.184487] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.184545] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.184555] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.184565] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.184572] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f] [ 0.184578] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbf80000-0xfbffffff] [ 0.184650] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.184654] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.184659] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.184696] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.184746] pci 0000:02:01.0: supports D1 D2 [ 0.184748] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot [ 0.184753] pci 0000:02:01.0: PME# disabled [ 0.184795] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff] [ 0.184803] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f] [ 0.184847] pci 0000:02:08.0: supports D1 D2 [ 0.184849] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184854] pci 0000:02:08.0: PME# disabled [ 0.184892] pci 0000:00:1e.0: transparent bridge [ 0.184896] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.184901] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.184915] pci_bus 0000:00: on NUMA node 0 [ 0.184920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.185089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.196734] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.196845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.196955] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.197065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.197173] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.197282] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.197394] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.197505] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.197629] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.197633] vgaarb: loaded [ 0.197755] SCSI subsystem initialized [ 0.197831] libata version 3.00 loaded. [ 0.197907] usbcore: registered new interface driver usbfs [ 0.197920] usbcore: registered new interface driver hub [ 0.197946] usbcore: registered new device driver usb [ 0.198078] ACPI: WMI: Mapper loaded [ 0.198080] PCI: Using ACPI for IRQ routing [ 0.198227] NetLabel: Initializing [ 0.198229] NetLabel: domain hash size = 128 [ 0.198230] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.198243] NetLabel: unlabeled traffic allowed by default [ 0.198274] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.198279] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.174052] Switching to clocksource tsc [ 2.174650] AppArmor: AppArmor Filesystem Enabled [ 2.174685] pnp: PnP ACPI init [ 2.174716] ACPI: bus type pnp registered [ 2.176906] pnp: PnP ACPI: found 12 devices [ 2.176909] ACPI: ACPI bus type pnp unregistered [ 2.176917] PnPBIOS: Disabled by ACPI PNP [ 2.176936] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 2.176940] system 00:01: ioport range 0x800-0x87f has been reserved [ 2.176943] system 00:01: ioport range 0x294-0x297 has been reserved [ 2.176946] system 00:01: ioport range 0x880-0x88f has been reserved [ 2.176956] system 00:08: ioport range 0x400-0x4bf has been reserved [ 2.176964] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 2.176971] system 00:0b: iomem range 0xd4800-0xd7fff has been reserved [ 2.176974] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 2.176977] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 2.176980] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 2.176983] system 00:0b: iomem range 0xfed00000-0xfed000ff has been reserved [ 2.176986] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 2.176989] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 2.176992] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved [ 2.176996] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 2.176999] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 2.177002] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved [ 2.177005] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 2.177008] system 00:0b: iomem range 0xe0000-0xeffff has been reserved [ 2.211791] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 2.211798] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 2.211803] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff [ 2.211808] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 2.211814] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 2.211817] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 2.211823] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 2.211828] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.211851] alloc irq_desc for 16 on node -1 [ 2.211854] alloc kstat_irqs on node -1 [ 2.211865] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.211871] pci 0000:00:01.0: setting latency timer to 64 [ 2.211883] pci 0000:00:1e.0: setting latency timer to 64 [ 2.211888] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.211891] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 2.211894] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 2.211897] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 2.211899] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 2.211902] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 2.211905] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 2.211907] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 2.211909] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 2.211964] NET: Registered protocol family 2 [ 2.212108] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.212520] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.213242] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.213625] TCP: Hash tables configured (established 131072 bind 65536) [ 2.213629] TCP reno registered [ 2.213804] NET: Registered protocol family 1 [ 2.213963] pci 0000:01:00.0: Boot video device [ 2.213976] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 2.214216] cpufreq-nforce2: No nForce2 chipset. [ 2.214259] Scanning for low memory corruption every 60 seconds [ 2.214403] audit: initializing netlink socket (disabled) [ 2.214422] type=2000 audit(1285701100.212:1): initialized [ 2.222277] Freeing initrd memory: 9156k freed [ 2.227036] highmem bounce pool size: 64 pages [ 2.227042] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.228673] VFS: Disk quotas dquot_6.5.2 [ 2.228739] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.229350] fuse init (API version 7.13) [ 2.229444] msgmni has been set to 1705 [ 2.229695] alg: No test for stdrng (krng) [ 2.229750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.229754] io scheduler noop registered [ 2.229756] io scheduler anticipatory registered [ 2.229758] io scheduler deadline registered [ 2.229796] io scheduler cfq registered (default) [ 2.229945] alloc irq_desc for 24 on node -1 [ 2.229947] alloc kstat_irqs on node -1 [ 2.229957] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.229964] pcieport 0000:00:01.0: setting latency timer to 64 [ 2.230035] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.230061] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.230158] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.230162] ACPI: Power Button [PWRB] [ 2.230224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.230227] ACPI: Power Button [PWRF] [ 2.230277] fan PNP0C0B:00: registered as cooling_device0 [ 2.230283] ACPI: Fan [FAN] (on) [ 2.230774] ACPI: SSDT 7fee7fc0 001B7 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 2.231001] processor LNXCPU:00: registered as cooling_device1 [ 2.231173] ACPI: SSDT 7fee83d0 000CE (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 2.231382] processor LNXCPU:01: registered as cooling_device2 [ 2.233548] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.233556] ACPI: Thermal Zone [THRM] (15 C) [ 2.233635] isapnp: Scanning for PnP cards... [ 2.235027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.236419] brd: module loaded [ 2.236934] loop: module loaded [ 2.237013] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.237096] ata_piix 0000:00:1f.1: version 2.13 [ 2.237110] alloc irq_desc for 18 on node -1 [ 2.237112] alloc kstat_irqs on node -1 [ 2.237118] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.237153] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.237227] scsi0 : ata_piix [ 2.237299] scsi1 : ata_piix [ 2.237685] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 2.237688] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 2.238030] Fixed MDIO Bus: probed [ 2.238067] PPP generic driver version 2.4.2 [ 2.238100] tun: Universal TUN/TAP device driver, 1.6 [ 2.238102] tun: (C) 1999-2004 Max Krasnyansky [ 2.238189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.238207] alloc irq_desc for 23 on node -1 [ 2.238208] alloc kstat_irqs on node -1 [ 2.238213] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.238223] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.238226] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.238263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.238281] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 2.242169] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.242182] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 2.256508] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.256597] usb usb1: configuration #1 chosen from 1 choice [ 2.256626] hub 1-0:1.0: USB hub found [ 2.256634] hub 1-0:1.0: 8 ports detected [ 2.256698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.256715] uhci_hcd: USB Universal Host Controller Interface driver [ 2.256734] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.256740] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.256744] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.256774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.256797] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 2.256883] usb usb2: configuration #1 chosen from 1 choice [ 2.256909] hub 2-0:1.0: USB hub found [ 2.256916] hub 2-0:1.0: 2 ports detected [ 2.256962] alloc irq_desc for 19 on node -1 [ 2.256964] alloc kstat_irqs on node -1 [ 2.256968] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.256974] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.256977] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.257008] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.257037] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 2.257125] usb usb3: configuration #1 chosen from 1 choice [ 2.257152] hub 3-0:1.0: USB hub found [ 2.257158] hub 3-0:1.0: 2 ports detected [ 2.257203] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.257211] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.257214] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.257245] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.257274] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 2.257358] usb usb4: configuration #1 chosen from 1 choice [ 2.257387] hub 4-0:1.0: USB hub found [ 2.257394] hub 4-0:1.0: 2 ports detected [ 2.257436] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.257441] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.257444] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.257483] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.257512] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 2.257599] usb usb5: configuration #1 chosen from 1 choice [ 2.257627] hub 5-0:1.0: USB hub found [ 2.257634] hub 5-0:1.0: 2 ports detected [ 2.257723] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.257725] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.258370] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.258474] mice: PS/2 mouse device common for all mice [ 2.258587] rtc_cmos 00:04: RTC can wake from S4 [ 2.258621] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.258648] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.258748] device-mapper: uevent: version 1.0.3 [ 2.258835] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.258895] device-mapper: multipath: version 1.1.0 loaded [ 2.258897] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.259000] EISA: Probing bus 0 at eisa.0 [ 2.259027] EISA: Detected 0 cards. [ 2.259098] cpuidle: using governor ladder [ 2.259100] cpuidle: using governor menu [ 2.259558] TCP cubic registered [ 2.259714] NET: Registered protocol family 10 [ 2.260209] lo: Disabled Privacy Extensions [ 2.260586] NET: Registered protocol family 17 [ 2.261594] Using IPI No-Shortcut mode [ 2.261695] PM: Resume from disk failed. [ 2.261708] registered taskstats version 1 [ 2.261961] Magic number: 10:754:193 [ 2.262030] rtc_cmos 00:04: setting system clock to 2010-09-28 19:11:50 UTC (1285701110) [ 2.262033] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.262034] EDD information not available. [ 2.262268] ata2: port disabled. ignoring. [ 2.280939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.587244] isapnp: No Plug & Play device found [ 2.587283] Freeing unused kernel memory: 660k freed [ 2.587576] Write protecting the kernel text: 4680k [ 2.587621] Write protecting the kernel read-only data: 1840k [ 2.607897] udev: starting version 151 [ 2.692267] Linux agpgart interface v0.103 [ 2.701238] ahci 0000:00:1f.2: version 3.0 [ 2.701259] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.701299] alloc irq_desc for 25 on node -1 [ 2.701302] alloc kstat_irqs on node -1 [ 2.701312] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X [ 2.701381] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 2.701385] ahci 0000:00:1f.2: flags: 64bit ncq led clo [ 2.701389] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.708882] scsi2 : ahci [ 2.709042] scsi3 : ahci [ 2.709159] scsi4 : ahci [ 2.709264] scsi5 : ahci [ 2.709411] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 25 [ 2.709415] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 25 [ 2.709418] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 25 [ 2.709421] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 25 [ 2.748567] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 2.808412] [drm] Initialized drm 1.1.0 20060810 [ 2.881057] usb 1-6: configuration #1 chosen from 1 choice [ 2.888436] Initializing USB Mass Storage driver... [ 2.888542] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.888632] usbcore: registered new interface driver usb-storage [ 2.888635] USB Mass Storage support registered. [ 2.888640] usb-storage: device found at 4 [ 2.888642] usb-storage: waiting for device to settle before scanning [ 2.992053] usb 1-7: new high speed USB device using ehci_hcd and address 5 [ 3.028047] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.028071] ata5: SATA link down (SStatus 0 SControl 300) [ 3.028097] ata6: SATA link down (SStatus 0 SControl 300) [ 3.028116] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.028831] ata3.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133 [ 3.028836] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.030609] ata3.00: configured for UDMA/133 [ 3.030785] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5 [ 3.030955] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.030989] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.031056] sd 2:0:0:0: [sda] Write Protect is off [ 3.031059] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.031084] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.031222] sda: sda1 sda4 [ 3.039536] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.141553] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33 [ 3.141817] usb 1-7: configuration #1 chosen from 1 choice [ 3.143443] scsi7 : SCSI emulation for USB Mass Storage devices [ 3.143644] usb-storage: device found at 5 [ 3.143646] usb-storage: waiting for device to settle before scanning [ 3.144458] ata4.00: configured for UDMA/33 [ 3.149164] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S755 PQ: 0 ANSI: 5 [ 3.155737] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.155742] Uniform CD-ROM driver Revision: 3.20 [ 3.155894] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.155976] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.171959] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.171962] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.172003] alloc irq_desc for 20 on node -1 [ 3.172006] alloc kstat_irqs on node -1 [ 3.172013] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.191905] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.191912] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.194510] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096000c1) [ 3.194943] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 3.195603] e100 0000:02:08.0: PME# disabled [ 3.196359] e100: eth0: e100_probe: addr 0xfdefe000, irq 20, MAC addr 00:1b:fc:40:34:53 [ 3.196399] ohci1394 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.244409] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.244414] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.244417] [drm] nouveau 0000:01:00.0: Bios version 62.94.2c.00 [ 3.244421] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 3.244424] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 3.244428] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 3.244431] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.244434] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 3.244437] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.244440] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 3.244443] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 3.244445] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028 [ 3.244449] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 3.244451] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 3.244454] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030 [ 3.244456] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c083 [ 3.244465] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD0DE [ 3.254531] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 3.296161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4F3 [ 3.312054] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE513 [ 3.312066] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE65C [ 3.320131] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE898 [ 3.320136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE8FD [ 3.344033] [drm] nouveau 0000:01:00.0: 0xE8FD: Condition still not met after 20ms, skipping following opcodes [ 3.344043] [drm] nouveau 0000:01:00.0: 0xC0AE: parsing output script 0 [ 3.344052] [drm] nouveau 0000:01:00.0: 0xC0AE: parsing output script 0 [ 3.344060] [drm] nouveau 0000:01:00.0: 0xAB3A: parsing output script 0 [ 3.380513] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 3.419520] [TTM] Zone kernel: Available graphics memory: 436858 kiB. [ 3.419523] [TTM] Zone highmem: Available graphics memory: 1030204 kiB. [ 3.419532] [drm] nouveau 0000:01:00.0: 512 MiB VRAM [ 3.446079] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 3.446859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 3.452941] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.453522] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.453525] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.453528] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.453530] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.453533] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 3.453536] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.453686] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.571290] usb 3-2: configuration #1 chosen from 1 choice [ 3.584556] [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 1 [ 3.589129] usbcore: registered new interface driver hiddev [ 3.595460] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 3.595560] generic-usb 0003:046D:C041.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-2/input0 [ 3.604293] generic-usb 0003:046D:C041.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-2/input1 [ 3.604314] usbcore: registered new interface driver usbhid [ 3.604316] usbhid: v2.6:USB HID core driver [ 3.639187] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo f6bdfc00 [ 3.639251] fb0: nouveaufb frame buffer device [ 3.639253] registered panic notifier [ 3.639260] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 3.640974] vga16fb: initializing [ 3.640977] vga16fb: mapped to 0xc00a0000 [ 3.640980] vga16fb: not registering due to another framebuffer present [ 3.648273] Console: switching to colour frame buffer device 160x64 [ 3.648309] [drm] nouveau 0000:01:00.0: 0x11F1: parsing clock script 0 [ 3.816025] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 3.955484] xor: automatically using best checksumming function: pIII_sse [ 3.971996] pIII_sse : 7356.000 MB/sec [ 3.971999] xor: using function: pIII_sse (7356.000 MB/sec) [ 3.974587] device-mapper: dm-raid45: initialized v0.2594b [ 3.992612] usb 4-1: configuration #1 chosen from 1 choice [ 4.012773] input: Primax Kensington Eagle Trackball as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input5 [ 4.012879] generic-usb 0003:047D:2048.0003: input,hidraw2: USB HID v1.11 Mouse [Primax Kensington Eagle Trackball] on usb-0000:00:1d.2-1/input0 [ 4.540294] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000147b470] [ 7.888148] usb-storage: device scan complete [ 7.888641] scsi 6:0:0:0: Direct-Access TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0 CCS [ 7.889514] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.889764] sd 6:0:0:0: [sdb] 3903487 512-byte logical blocks: (1.99 GB/1.86 GiB) [ 7.890226] sd 6:0:0:0: [sdb] Write Protect is off [ 7.890229] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 7.890232] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.891979] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.891986] sdb: sdb1 [ 7.894222] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.894225] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 8.140166] usb-storage: device scan complete [ 8.146671] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 8.153164] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 8.159789] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 8.166414] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 8.166994] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 8.167162] sd 7:0:0:1: Attached scsi generic sg4 type 0 [ 8.167310] sd 7:0:0:2: Attached scsi generic sg5 type 0 [ 8.167451] sd 7:0:0:3: Attached scsi generic sg6 type 0 [ 8.169897] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 8.173575] sd 7:0:0:2: [sde] Attached SCSI removable disk [ 8.174131] sd 7:0:0:1: [sdd] Attached SCSI removable disk [ 8.174881] sd 7:0:0:3: [sdf] Attached SCSI removable disk [ 8.348235] aufs 2-standalone.tree-20091207 [ 8.361644] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 10.075144] kjournald starting. Commit interval 5 seconds [ 10.075864] EXT3 FS on loop1, internal journal [ 10.075872] EXT3-fs: mounted filesystem with ordered data mode. [ 10.089528] aufs test_add:243:exe[793]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755 [ 30.846078] udev: starting version 151 [ 31.673294] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.676152] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 31.692459] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.813032] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 31.813059] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 31.932746] hda_codec: ALC1200: BIOS auto-probing. [ 31.934474] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 32.803889] lp: driver loaded but no devices found [ 32.986387] ppdev: user-space parallel port driver [ 33.365391] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 33.383715] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 34.574283] CPU0 attaching NULL sched-domain. [ 34.574289] CPU1 attaching NULL sched-domain. [ 34.596067] CPU0 attaching sched-domain: [ 34.596070] domain 0: span 0-1 level MC [ 34.596073] groups: 0 1 [ 34.596079] CPU1 attaching sched-domain: [ 34.596082] domain 0: span 0-1 level MC [ 34.596084] groups: 1 0 [ 42.164014] eth0: no IPv6 routers present [ 113.797685] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2 [ 116.466237] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 116.472980] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 122.507826] CPU0 attaching NULL sched-domain. [ 122.507834] CPU1 attaching NULL sched-domain. [ 122.532081] CPU0 attaching sched-domain: [ 122.532085] domain 0: span 0-1 level MC [ 122.532088] groups: 0 1 [ 122.532094] CPU1 attaching sched-domain: [ 122.532096] domain 0: span 0-1 level MC [ 122.532099] groups: 1 0