[ 14.412538] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex [ 14.412542] tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX [ 14.412697] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.510013] cfg80211: Found new beacon on frequency: 5200 MHz (Ch 40) on phy0 [ 15.950258] ppdev: user-space parallel port driver [ 16.765822] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0 [ 17.834912] ata1.00: configured for UDMA/133 [ 17.834919] ata1: EH complete [ 18.439034] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0 [ 21.762063] ata1.00: configured for UDMA/133 [ 21.762071] ata1: EH complete [ 23.425141] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0 [ 24.516129] eth0: no IPv6 routers present [ 270.244878] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 273.795842] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 1) [ 273.994183] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 2) [ 274.192303] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 3) [ 274.392436] wlan0: direct probe to 00:1a:1e:14:6c:40 timed out [ 287.069499] wlan0: authenticate with 00:1a:1e:d1:3a:00 (try 1) [ 287.072306] wlan0: authenticated [ 287.076532] wlan0: associate with 00:1a:1e:d1:3a:00 (try 1) [ 287.082716] wlan0: RX AssocResp from 00:1a:1e:d1:3a:00 (capab=0x521 status=0 aid=1) [ 287.082724] wlan0: associated [ 287.086811] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 287.086900] cfg80211: Calling CRDA for country: US [ 287.091947] cfg80211: Received country IE: [ 287.091951] cfg80211: Regulatory domain: US [ 287.091952] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 287.091954] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3600 mBm) [ 287.091956] cfg80211: CRDA thinks this should applied: [ 287.091957] cfg80211: Regulatory domain: US [ 287.091958] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 287.091960] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 287.091962] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 287.091964] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 287.091966] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 287.091968] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 287.091970] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 287.091971] cfg80211: We intersect both of these and get: [ 287.091972] cfg80211: Regulatory domain: 98 [ 287.091973] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 287.091975] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 287.091979] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 287.091981] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 287.091983] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 287.091984] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 287.091986] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 287.091988] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 287.091990] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 287.091992] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 287.091993] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 287.091995] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 287.091997] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 287.091999] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 287.092001] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 287.092002] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 287.092004] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 287.092006] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 287.092008] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 287.092009] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 287.092011] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 287.092013] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 287.092015] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 287.092017] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE [ 287.092018] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE [ 287.092020] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE [ 287.092022] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE [ 287.092024] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE [ 287.092028] cfg80211: Current regulatory domain updated by AP to: US [ 287.092029] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 287.092031] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 297.550865] wlan0: no IPv6 routers present [ 607.457803] dell-wmi: Unknown key 3a pressed [ 641.373320] lo: Disabled Privacy Extensions [ 981.464502] wlan0: deauthenticating from 00:1a:1e:d1:3a:00 by local choice (reason=3) [ 981.511704] cfg80211: All devices are disconnected, going to restore regulatory settings [ 981.511713] cfg80211: Restoring regulatory settings [ 981.511720] cfg80211: Calling CRDA to update world regulatory domain [ 981.517027] cfg80211: World regulatory domain updated: [ 981.517031] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 981.517036] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 981.517041] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 981.517045] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 981.517049] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 981.517053] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 981.557153] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 1) [ 981.754900] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 2) [ 981.954518] wlan0: direct probe to 00:1a:1e:14:6c:40 (try 3) [ 982.154130] wlan0: direct probe to 00:1a:1e:14:6c:40 timed out [ 994.610986] wlan0: authenticate with 00:1a:1e:d1:3a:00 (try 1) [ 994.635523] wlan0: authenticated [ 994.640016] wlan0: associate with 00:1a:1e:d1:3a:00 (try 1) [ 994.838573] wlan0: associate with 00:1a:1e:d1:3a:00 (try 2) [ 994.869328] wlan0: RX AssocResp from 00:1a:1e:d1:3a:00 (capab=0x421 status=0 aid=1) [ 994.869334] wlan0: associated [ 994.881918] cfg80211: Calling CRDA for country: US [ 994.887577] cfg80211: Received country IE: [ 994.887582] cfg80211: Regulatory domain: US [ 994.887585] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 994.887590] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 3600 mBm) [ 994.887593] cfg80211: CRDA thinks this should applied: [ 994.887596] cfg80211: Regulatory domain: US [ 994.887598] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 994.887603] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 994.887607] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 994.887611] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 994.887615] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 994.887619] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 994.887623] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 994.887626] cfg80211: We intersect both of these and get: [ 994.887628] cfg80211: Regulatory domain: 98 [ 994.887630] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 994.887635] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 994.887641] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 994.887645] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 994.887648] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 994.887652] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 994.887656] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 994.887660] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 994.887663] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 994.887667] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 994.887671] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 994.887675] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 994.887678] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 994.887682] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 994.887686] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 994.887690] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 994.887693] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 994.887697] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 994.887701] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 994.887705] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 994.887709] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 994.887712] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 994.887716] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 994.887720] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE [ 994.887724] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE [ 994.887727] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE [ 994.887731] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE [ 994.887735] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE [ 994.887743] cfg80211: Current regulatory domain updated by AP to: US [ 994.887746] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 994.887750] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1439.467332] dell-wmi: Unknown key 3a pressed [ 1538.838304] dell-wmi: Unknown key 3a pressed [ 1553.006856] dell-wmi: Unknown key 3a pressed [ 1554.167433] dell-wmi: Unknown key 3a pressed [ 1554.812266] dell-wmi: Unknown key 3a pressed [ 1557.748068] dell-wmi: Unknown key 3a pressed [ 1603.013785] dell-wmi: Unknown key 3a pressed