[ 24.940017] Skipping EDID probe due to cached edid [ 24.943901] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa04000/0x20000 [ 24.943904] synaptics: Toshiba Satellite L305 detected, limiting rate to 40pps. [ 24.982788] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.982792] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 24.982793] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 24.982794] vboxdrv: the usage of hardware performance counters by [ 24.982795] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 24.982957] vboxdrv: Found 1 processor cores. [ 24.985211] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.985215] vboxdrv: Successfully loaded version 3.1.8 (interface 0x00100001). [ 25.036505] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [ 25.421571] Console: switching to colour frame buffer device 106x30 [ 25.423029] fb0: inteldrmfb frame buffer device [ 25.423031] drm: registered panic notifier [ 25.423042] Slow work thread pool: Starting up [ 25.423085] Slow work thread pool: Ready [ 25.433802] acpi device:02: registered as cooling_device2 [ 25.435237] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 25.435386] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 25.436319] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 25.436363] alloc irq_desc for 22 on node -1 [ 25.436365] alloc kstat_irqs on node -1 [ 25.436372] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 25.436432] alloc irq_desc for 45 on node -1 [ 25.436433] alloc kstat_irqs on node -1 [ 25.436444] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 25.436486] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 25.499075] hda_codec: ALC268: BIOS auto-probing. [ 25.556036] Skipping EDID probe due to cached edid [ 25.932073] Skipping EDID probe due to cached edid [ 26.048051] Skipping EDID probe due to cached edid [ 26.540033] Skipping EDID probe due to cached edid [ 26.664030] Skipping EDID probe due to cached edid [ 26.788034] Skipping EDID probe due to cached edid [ 26.904023] Skipping EDID probe due to cached edid [ 27.901260] ata1.00: configured for UDMA/133 [ 27.901265] ata1: EH complete [ 28.865401] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.214594] ppdev: user-space parallel port driver [ 30.236888] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 34.112069] Skipping EDID probe due to cached edid [ 34.240030] Skipping EDID probe due to cached edid [ 34.368032] Skipping EDID probe due to cached edid [ 34.488028] Skipping EDID probe due to cached edid [ 36.676054] Skipping EDID probe due to cached edid [ 39.317291] wlan0: authenticate with 00:26:f2:f0:30:bc (try 1) [ 39.319282] wlan0: authenticated [ 39.393289] wlan0: associate with 00:26:f2:f0:30:bc (try 1) [ 39.467668] wlan0: RX AssocResp from 00:26:f2:f0:30:bc (capab=0x431 status=0 aid=3) [ 39.467672] wlan0: associated [ 39.542373] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.542431] cfg80211: Calling CRDA for country: US [ 39.588874] cfg80211: Received country IE: [ 39.588878] cfg80211: Regulatory domain: US [ 39.588880] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.588883] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 2700 mBm) [ 39.588884] cfg80211: CRDA thinks this should applied: [ 39.588886] cfg80211: Regulatory domain: US [ 39.588887] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.588890] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 39.588892] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 39.588895] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.588897] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.588899] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.588901] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 39.588903] cfg80211: We intersect both of these and get: [ 39.588905] cfg80211: Regulatory domain: 98 [ 39.588906] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.588909] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 39.588913] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 39.588915] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 39.588917] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 39.588920] cfg80211: Current regulatory domain updated by AP to: US [ 39.588922] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.588924] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 39.671013] padlock: VIA PadLock not detected. [ 40.408063] Skipping EDID probe due to cached edid [ 50.272021] wlan0: no IPv6 routers present [ 2755.609688] ata1.00: configured for UDMA/133 [ 2755.609694] ata1: EH complete [ 2755.805552] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 2757.141890] wlan0: deauthenticating from 00:26:f2:f0:30:bc by local choice (reason=3) [ 2757.209913] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2757.209918] cfg80211: Restoring regulatory settings [ 2757.209921] cfg80211: Calling CRDA to update world regulatory domain [ 2757.227914] cfg80211: World regulatory domain updated: [ 2757.227917] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2757.227921] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2757.227923] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2757.227926] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2757.227928] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2757.227930] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2757.680054] PM: Syncing filesystems ... done. [ 2757.685052] PM: Preparing system for mem sleep [ 2757.736097] Freezing user space processes ... (elapsed 0.07 seconds) done. [ 2757.816033] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 2757.832030] PM: Entering mem sleep [ 2757.832058] Suspending console(s) (use no_console_suspend to debug) [ 2757.832644] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2757.883823] sd 0:0:0:0: [sda] Stopping disk [ 2757.914510] uhci_hcd 0000:00:1d.3: PCI INT C disabled [ 2757.914542] uhci_hcd 0000:00:1d.2: PCI INT D disabled [ 2757.914573] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 2757.914603] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 2757.915164] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 2757.915194] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 2757.915226] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 2758.016095] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 2758.032017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.337 msecs [ 2758.200017] usb 2-6: reset high speed USB device using ehci_hcd and address 2 [ 2758.348016] PM: suspend of drv:usb dev:2-6 complete after 515.283 msecs [ 2758.348048] PM: suspend of drv:usb dev:usb2 complete after 434.187 msecs [ 2758.364029] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 2758.364032] PM: suspend of drv:ehci_hcd dev:0000:00:1d.7 complete after 449.551 msecs [ 2758.410070] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.426 msecs [ 2758.410077] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.399 msecs [ 2758.410082] PM: suspend of drv:scsi dev:host0 complete after 577.366 msecs [ 2758.488017] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 573.605 msecs [ 2758.488023] PM: suspend of drv: dev:pci0000:00 complete after 572.496 msecs [ 2758.488028] PM: suspend of devices complete after 655.851 msecs [ 2758.488030] PM: suspend devices took 0.656 seconds [ 2758.488652] r8169 0000:02:00.0: PME# enabled [ 2758.488662] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI [ 2758.536195] PM: late suspend of devices complete after 48.161 msecs [ 2758.544129] ACPI: Preparing to enter system sleep state S3 [ 2758.546734] PM: Saving platform NVS memory [ 2758.553235] Disabling non-boot CPUs ... [ 2758.553235] Back to C! [ 2758.553235] PM: Restoring platform NVS memory [ 2758.553235] ACPI: Waking up from system sleep state S3 [ 2758.576343] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x4111) [ 2758.576348] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0x8000000c) [ 2758.576354] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 2758.576414] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576455] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576503] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 2758.576555] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 2758.576562] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 2758.576595] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2758.576607] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x91419041) [ 2758.576612] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x94509360) [ 2758.576617] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x3020) [ 2758.576622] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 2758.576632] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2758.576681] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 2758.576693] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x92419151) [ 2758.576698] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x93509260) [ 2758.576703] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x1010) [ 2758.576707] pcieport 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x70600) [ 2758.576718] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 2758.576779] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576820] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576861] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576901] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2758.576948] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 2758.576984] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 2758.576989] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 2758.576994] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 2758.577006] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2758.577102] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 2758.596016] pci_raw_set_power_state: 9 callbacks suppressed [ 2758.596018] r8169 0000:02:00.0: Refused to change power state, currently in D3 [ 2758.596028] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0xffffffff, writing 0x105) [ 2758.596033] r8169 0000:02:00.0: restoring config space at offset 0xe (was 0xffffffff, writing 0x0) [ 2758.596038] r8169 0000:02:00.0: restoring config space at offset 0xd (was 0xffffffff, writing 0x40) [ 2758.596043] r8169 0000:02:00.0: restoring config space at offset 0xc (was 0xffffffff, writing 0xfffe0000) [ 2758.596048] r8169 0000:02:00.0: restoring config space at offset 0xb (was 0xffffffff, writing 0xff661179) [ 2758.596053] r8169 0000:02:00.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0) [ 2758.596058] r8169 0000:02:00.0: restoring config space at offset 0x9 (was 0xffffffff, writing 0x0) [ 2758.596063] r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xffffffff, writing 0x9040000c) [ 2758.596068] r8169 0000:02:00.0: restoring config space at offset 0x7 (was 0xffffffff, writing 0x0) [ 2758.596073] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xffffffff, writing 0x9041000c) [ 2758.596078] r8169 0000:02:00.0: restoring config space at offset 0x5 (was 0xffffffff, writing 0x0) [ 2758.596082] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0xffffffff, writing 0x2001) [ 2758.596087] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0xffffffff, writing 0x10) [ 2758.596092] r8169 0000:02:00.0: restoring config space at offset 0x2 (was 0xffffffff, writing 0x2000002) [ 2758.596097] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0xffffffff, writing 0x100407) [ 2758.596102] r8169 0000:02:00.0: restoring config space at offset 0x0 (was 0xffffffff, writing 0x813610ec) [ 2758.596515] PM: early resume of devices complete after 20.291 msecs [ 2758.622215] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2758.622222] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2758.622247] usb usb3: root hub lost power or was reset [ 2758.622269] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2758.622275] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2758.622297] usb usb4: root hub lost power or was reset [ 2758.622319] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2758.622325] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2758.622355] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2758.622361] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2758.622405] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 2758.622449] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2758.622455] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2758.622478] usb usb5: root hub lost power or was reset [ 2758.622499] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2758.622505] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2758.622527] usb usb6: root hub lost power or was reset [ 2758.622548] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2758.622554] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2758.622577] usb usb7: root hub lost power or was reset [ 2758.622597] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2758.622603] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2758.622625] usb usb8: root hub lost power or was reset [ 2758.622645] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2758.622652] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2758.622701] pci 0000:00:1e.0: setting latency timer to 64 [ 2758.622717] ahci 0000:00:1f.2: setting latency timer to 64 [ 2758.622778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI [ 2758.622792] r8169 0000:02:00.0: PME# disabled [ 2758.622902] sd 0:0:0:0: [sda] Starting disk [ 2758.630966] i915 0000:00:02.0: setting latency timer to 64 [ 2758.752031] PM: resume of drv:usb dev:usb2 complete after 129.218 msecs [ 2758.752042] PM: resume of drv:hub dev:2-0:1.0 complete after 129.226 msecs [ 2758.752059] PM: resume of drv: dev:ep_81 complete after 103.942 msecs [ 2758.764041] PM: resume of drv:usb dev:usb3 complete after 141.222 msecs [ 2758.764057] PM: resume of drv:usb dev:usb4 complete after 141.230 msecs [ 2758.764073] PM: resume of drv:usb dev:usb5 complete after 141.237 msecs [ 2758.764089] PM: resume of drv:usb dev:usb6 complete after 141.246 msecs [ 2758.764106] PM: resume of drv:usb dev:usb7 complete after 141.255 msecs [ 2758.764121] PM: resume of drv:usb dev:usb8 complete after 141.263 msecs [ 2758.764127] PM: resume of drv:hub dev:3-0:1.0 complete after 141.302 msecs [ 2758.764132] PM: resume of drv:hub dev:4-0:1.0 complete after 141.299 msecs [ 2758.764136] PM: resume of drv:hub dev:5-0:1.0 complete after 141.296 msecs [ 2758.764141] PM: resume of drv:hub dev:6-0:1.0 complete after 141.292 msecs [ 2758.764145] PM: resume of drv:hub dev:7-0:1.0 complete after 141.289 msecs [ 2758.764150] PM: resume of drv:hub dev:8-0:1.0 complete after 141.286 msecs [ 2758.864034] usb 2-6: reset high speed USB device using ehci_hcd and address 2 [ 2758.868182] PM: resume of drv:i915 dev:0000:00:02.0 complete after 245.989 msecs [ 2758.948038] ata2: SATA link down (SStatus 0 SControl 300) [ 2758.956037] ata5: SATA link down (SStatus 0 SControl 300) [ 2758.998986] PM: resume of drv:usb dev:2-6 complete after 376.119 msecs [ 2758.998993] PM: resume of drv:usb dev:2-6:1.0 complete after 376.123 msecs [ 2758.998998] PM: resume of drv: dev:ep_83 complete after 227.385 msecs [ 2759.128035] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2759.134231] ata6.00: configured for UDMA/33 [ 2760.840057] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2760.855533] ata1.00: configured for UDMA/133 [ 2760.886180] PM: resume of drv:sd dev:0:0:0:0 complete after 2263.274 msecs [ 2760.886188] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2258.137 msecs [ 2760.886192] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1887.168 msecs [ 2760.886334] PM: resume of devices complete after 2289.790 msecs [ 2761.168000] phy1: Selected rate control algorithm 'minstrel' [ 2761.168480] phy1: hwaddr 00:24:d2:9a:55:62, RTL8187BvE V0 + rtl8225z2, rfkill mask 4 [ 2761.189976] rtl8187: Customer ID is 0x04 [ 2761.189998] Registered led device: rtl8187-phy1::radio [ 2761.190013] Registered led device: rtl8187-phy1::tx [ 2761.190027] Registered led device: rtl8187-phy1::rx [ 2761.190715] rtl8187: wireless switch is on [ 2761.190803] PM: resume devices took 2.592 seconds [ 2761.190840] PM: Finishing wakeup. [ 2761.190842] Restarting tasks ... done. [ 2761.222585] video LNXVIDEO:00: Restoring backlight state [ 2761.286351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 2761.328064] Skipping EDID probe due to cached edid [ 2762.121664] r8169 0000:02:00.0: eth0: link up [ 2765.989555] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2767.067240] ata1.00: configured for UDMA/133 [ 2767.067246] ata1: EH complete [ 2767.399287] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 2767.754468] ata6: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10 [ 2767.754472] ata6: irq_stat 0x40000001 [ 2767.754475] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 [ 2767.754485] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 2767.754486] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [ 2767.754489] ata6.00: status: { DRDY ERR } [ 2772.640035] eth0: no IPv6 routers present [ 2778.537274] wlan0: authenticate with 00:26:f2:f0:30:bc (try 1) [ 2778.539265] wlan0: authenticated [ 2778.609273] wlan0: associate with 00:26:f2:f0:30:bc (try 1) [ 2778.678778] wlan0: RX AssocResp from 00:26:f2:f0:30:bc (capab=0x431 status=0 aid=2) [ 2778.678781] wlan0: associated [ 2778.753474] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2778.753527] cfg80211: Calling CRDA for country: US [ 2778.764957] cfg80211: Received country IE: [ 2778.764961] cfg80211: Regulatory domain: US [ 2778.764963] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2778.764965] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 2700 mBm) [ 2778.764967] cfg80211: CRDA thinks this should applied: [ 2778.764969] cfg80211: Regulatory domain: US [ 2778.764970] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2778.764973] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2778.764975] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 2778.764978] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2778.764980] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2778.764982] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2778.764985] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 2778.764986] cfg80211: We intersect both of these and get: [ 2778.764988] cfg80211: Regulatory domain: 98 [ 2778.764989] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2778.764992] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2778.764996] cfg80211: Disabling channel 2467 MHz on phy1 due to Country IE [ 2778.764998] cfg80211: Disabling channel 2472 MHz on phy1 due to Country IE [ 2778.765000] cfg80211: Disabling channel 2484 MHz on phy1 due to Country IE [ 2778.765003] cfg80211: Current regulatory domain updated by AP to: US [ 2778.765005] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2778.765007] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 2789.360025] wlan0: no IPv6 routers present [ 6390.016027] ------------[ cut here ]------------ [ 6390.016037] WARNING: at /build/buildd/linux-2.6.35/net/sched/sch_generic.c:258 dev_watchdog+0x1fd/0x210() [ 6390.016039] Hardware name: Satellite L305 [ 6390.016041] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out [ 6390.016043] Modules linked in: aes_i586 aes_generic binfmt_misc parport_pc ppdev snd_hda_codec_realtek vboxnetadp vboxnetflt joydev vboxdrv arc4 snd_hda_intel i915 snd_hda_codec snd_hwdep snd_pcm drm_kms_helper snd_seq_midi snd_rawmidi rtl8187 drm mac80211 snd_seq_midi_event snd_seq led_class snd_timer snd_seq_device cfg80211 eeprom_93cx6 psmouse snd intel_agp serio_raw soundcore i2c_algo_bit video agpgart snd_page_alloc output lp parport ahci libahci r8169 mii [ 6390.016072] Pid: 0, comm: swapper Not tainted 2.6.35-19-generic #28-Ubuntu [ 6390.016074] Call Trace: [ 6390.016081] [] warn_slowpath_common+0x72/0xa0 [ 6390.016084] [] ? dev_watchdog+0x1fd/0x210 [ 6390.016087] [] ? dev_watchdog+0x1fd/0x210 [ 6390.016090] [] warn_slowpath_fmt+0x33/0x40 [ 6390.016093] [] dev_watchdog+0x1fd/0x210 [ 6390.016096] [] ? tick_program_event+0x2e/0x40 [ 6390.016099] [] ? hrtimer_interrupt+0x1ae/0x2a0 [ 6390.016102] [] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 6390.016106] [] ? dev_watchdog+0x0/0x210 [ 6390.016109] [] call_timer_fn+0x2f/0xf0 [ 6390.016112] [] run_timer_softirq+0x104/0x210 [ 6390.016115] [] ? tick_handle_oneshot_broadcast+0x12c/0x140 [ 6390.016118] [] ? dev_watchdog+0x0/0x210 [ 6390.016121] [] __do_softirq+0x9c/0x1b0 [ 6390.016125] [] ? handle_IRQ_event+0x44/0x150 [ 6390.016128] [] ? irq_to_desc+0x14/0x20 [ 6390.016130] [] ? move_native_irq+0x19/0x50 [ 6390.016133] [] do_softirq+0x45/0x50 [ 6390.016136] [] irq_exit+0x65/0x70 [ 6390.016139] [] do_IRQ+0x55/0xc0 [ 6390.016142] [] ? sched_clock_local+0xa4/0x180 [ 6390.016145] [] common_interrupt+0x30/0x38 [ 6390.016149] [] ? sys_getpriority+0x7b/0x200 [ 6390.016153] [] ? acpi_idle_enter_simple+0xf1/0x12d [ 6390.016157] [] cpuidle_idle_call+0x7a/0x100 [ 6390.016159] [] cpu_idle+0x8c/0xd0 [ 6390.016165] [] rest_init+0x71/0x80 [ 6390.016168] [] start_kernel+0x36e/0x374 [ 6390.016171] [] ? pass_all_bootoptions+0x0/0xa [ 6390.016174] [] i386_start_kernel+0xd7/0xdf [ 6390.016176] ---[ end trace 5bf938c876b5399d ]--- [ 6390.833631] r8169 0000:02:00.0: eth0: link up