[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000c8000 - 00000000000ce000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000c8000 - 00000000000ce000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] modified: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f898000 - 300334b6 [ 0.000000] ACPI: RSDP 000fa210 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 3fff0000 00028 (v01 AMIINT VIA_P6 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT VIA_P6 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 3fff0120 02F51 (v01 VIA APOLLO-P 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3fff8000 00040 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [002f898000 - 00300334b6] RAMDISK ==> [002f898000 - 00300334b6] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e10e4] BRK ==> [00008de000 - 00008e10e4] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fb840] fb840 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: No APIC-table, disabling MPS [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c8000 [ 0.000000] PM: Registered nosave memory: 00000000000c8000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=9f18d01b-ed8d-4c2b-9e24-09baf906f169 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017416k/1048512k available (4679k kernel code, 30072k reserved, 2124k data, 660k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.387 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.77 BogoMIPS (lpj=9601548) [ 0.004041] Security Framework initialized [ 0.004090] AppArmor: AppArmor initialized [ 0.004103] Mount-cache hash table entries: 512 [ 0.004334] Initializing cgroup subsys ns [ 0.004344] Initializing cgroup subsys cpuacct [ 0.004353] Initializing cgroup subsys memory [ 0.004370] Initializing cgroup subsys devices [ 0.004376] Initializing cgroup subsys freezer [ 0.004381] Initializing cgroup subsys net_cls [ 0.004421] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004428] CPU: L2 cache: 512K [ 0.004433] CPU: Hyper-Threading is disabled [ 0.004441] mce: CPU supports 4 MCE banks [ 0.004458] CPU0: Thermal monitoring enabled (TM1) [ 0.004477] Performance Events: no PMU driver, software events only. [ 0.004491] Checking 'hlt' instruction... OK. [ 0.021173] SMP alternatives: switching to UP code [ 0.034418] Freeing SMP alternatives: 19k freed [ 0.034456] ACPI: Core revision 20090903 [ 0.041819] ACPI: setting ELCR to 0200 (from 0820) [ 0.042167] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.042177] ftrace: allocating 21780 entries in 43 pages [ 0.044131] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.044138] weird, boot CPU (#0) not listed by the BIOS. [ 0.044141] SMP motherboard not detected. [ 0.048001] SMP disabled [ 0.048001] Brought up 1 CPUs [ 0.048001] Total of 1 processors activated (4800.77 BogoMIPS). [ 0.048001] CPU0 attaching NULL sched-domain. [ 0.048001] devtmpfs: initialized [ 0.048001] regulator: core version 0.5 [ 0.048001] Time: 16:02:44 Date: 09/06/10 [ 0.048001] NET: Registered protocol family 16 [ 0.048001] EISA bus registered [ 0.048001] ACPI: bus type pci registered [ 0.051338] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 [ 0.051341] PCI: Using configuration type 1 for base access [ 0.052704] bio: create slab at 0 [ 0.053294] ACPI: EC: Look up EC in DSDT [ 0.059591] ACPI: Interpreter enabled [ 0.059601] ACPI: (supports S0 S1 S4 S5) [ 0.059629] ACPI: Using PIC for interrupt routing [ 0.065277] ACPI: Power Resource [URP1] (off) [ 0.065316] ACPI: Power Resource [URP2] (off) [ 0.065354] ACPI: Power Resource [FDDP] (off) [ 0.065392] ACPI: Power Resource [LPTP] (off) [ 0.065537] ACPI: No dock devices found. [ 0.065708] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.065776] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.065889] pci 0000:00:01.0: supports D1 [ 0.065935] pci 0000:00:09.0: reg 10 32bit mmio: [0xdffff000-0xdfffffff] [ 0.065943] pci 0000:00:09.0: reg 14 io port: [0xec00-0xecff] [ 0.065985] pci 0000:00:09.0: PME# supported from D3hot D3cold [ 0.065991] pci 0000:00:09.0: PME# disabled [ 0.066029] pci 0000:00:0a.0: reg 10 io port: [0xe800-0xe8ff] [ 0.066037] pci 0000:00:0a.0: reg 14 32bit mmio: [0xdfffef00-0xdfffefff] [ 0.066064] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0xdffe0000-0xdffeffff] [ 0.066085] pci 0000:00:0a.0: supports D1 [ 0.066088] pci 0000:00:0a.0: PME# supported from D1 D3cold [ 0.066093] pci 0000:00:0a.0: PME# disabled [ 0.066132] pci 0000:00:0b.0: reg 10 32bit mmio: [0xdffd0000-0xdffdffff] [ 0.066240] pci 0000:00:10.0: reg 20 io port: [0xdc00-0xdc1f] [ 0.066270] pci 0000:00:10.0: supports D1 D2 [ 0.066273] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066278] pci 0000:00:10.0: PME# disabled [ 0.066336] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f] [ 0.066366] pci 0000:00:10.1: supports D1 D2 [ 0.066369] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066374] pci 0000:00:10.1: PME# disabled [ 0.066429] pci 0000:00:10.2: reg 20 io port: [0xe400-0xe41f] [ 0.066459] pci 0000:00:10.2: supports D1 D2 [ 0.066462] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066467] pci 0000:00:10.2: PME# disabled [ 0.066503] pci 0000:00:10.3: reg 10 32bit mmio: [0xdfffee00-0xdfffeeff] [ 0.066551] pci 0000:00:10.3: supports D1 D2 [ 0.066554] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066559] pci 0000:00:10.3: PME# disabled [ 0.066632] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.066640] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM [ 0.066644] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB [ 0.066717] pci 0000:00:11.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.066789] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff] [ 0.066839] pci 0000:00:11.5: supports D1 D2 [ 0.066917] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdbffffff] [ 0.066925] pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff] [ 0.066934] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfefc000-0xdfefffff] [ 0.066955] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfec0000-0xdfedffff] [ 0.066983] pci 0000:01:00.0: supports D1 [ 0.067026] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.067032] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.067037] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7c00000-0xdfcfffff] [ 0.067047] pci_bus 0000:00: on NUMA node 0 [ 0.067054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.088598] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.088723] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.088846] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.088968] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.089126] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.089130] vgaarb: loaded [ 0.089318] SCSI subsystem initialized [ 0.089433] libata version 3.00 loaded. [ 0.089545] usbcore: registered new interface driver usbfs [ 0.089565] usbcore: registered new interface driver hub [ 0.089601] usbcore: registered new device driver usb [ 0.089796] ACPI: WMI: Mapper loaded [ 0.089799] PCI: Using ACPI for IRQ routing [ 0.089996] NetLabel: Initializing [ 0.089999] NetLabel: domain hash size = 128 [ 0.090001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.090020] NetLabel: unlabeled traffic allowed by default [ 0.090086] Switching to clocksource tsc [ 0.092001] AppArmor: AppArmor Filesystem Enabled [ 0.092001] pnp: PnP ACPI init [ 0.092001] ACPI: bus type pnp registered [ 0.095154] pnp: PnP ACPI: found 13 devices [ 0.095158] ACPI: ACPI bus type pnp unregistered [ 0.095165] PnPBIOS: Disabled by ACPI PNP [ 0.129985] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.129991] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.129998] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff [ 0.130004] pci 0000:00:01.0: PREFETCH window: 0xd7c00000-0xdfcfffff [ 0.130023] pci 0000:00:01.0: setting latency timer to 64 [ 0.130030] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.130034] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.130037] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.130041] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff] [ 0.130045] pci_bus 0000:01: resource 2 pref mem [0xd7c00000-0xdfcfffff] [ 0.130101] NET: Registered protocol family 2 [ 0.130242] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.130808] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.132072] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.132882] TCP: Hash tables configured (established 131072 bind 65536) [ 0.132889] TCP reno registered [ 0.133116] NET: Registered protocol family 1 [ 0.133152] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.133255] pci 0000:01:00.0: Boot video device [ 0.133590] cpufreq-nforce2: No nForce2 chipset. [ 0.133629] Scanning for low memory corruption every 60 seconds [ 0.133784] audit: initializing netlink socket (disabled) [ 0.133802] type=2000 audit(1283788964.129:1): initialized [ 0.143847] Trying to unpack rootfs image as initramfs... [ 0.154320] highmem bounce pool size: 64 pages [ 0.154336] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.160167] VFS: Disk quotas dquot_6.5.2 [ 0.160264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.161143] fuse init (API version 7.13) [ 0.161270] msgmni has been set to 1716 [ 0.166487] alg: No test for stdrng (krng) [ 0.166632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.166637] io scheduler noop registered [ 0.166640] io scheduler anticipatory registered [ 0.166643] io scheduler deadline registered [ 0.166704] io scheduler cfq registered (default) [ 0.166858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.166897] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.167038] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.167045] ACPI: Power Button [PWRB] [ 0.167125] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.167135] ACPI: Sleep Button [SLPB] [ 0.167196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.167200] ACPI: Power Button [PWRF] [ 0.167449] processor LNXCPU:00: registered as cooling_device0 [ 0.173952] isapnp: Scanning for PnP cards... [ 0.179811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.179946] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.180075] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.180429] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.180603] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.181087] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.181092] PCI: setting IRQ 11 as level-triggered [ 0.181100] serial 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.181539] 0000:00:09.0: ttyS2 at I/O 0xec28 (irq = 11) is a 8250 [ 0.181758] 0000:00:09.0: ttyS3 at I/O 0xec40 (irq = 11) is a 8250 [ 0.181791] Couldn't register serial port 0000:00:09.0: -28 [ 0.187743] brd: module loaded [ 0.188417] loop: module loaded [ 0.188597] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.188855] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 0.188944] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 0.189414] Fixed MDIO Bus: probed [ 0.189465] PPP generic driver version 2.4.2 [ 0.189543] tun: Universal TUN/TAP device driver, 1.6 [ 0.189546] tun: (C) 1999-2004 Max Krasnyansky [ 0.189661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.238329] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 0.238336] PCI: setting IRQ 5 as level-triggered [ 0.238345] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 0.238378] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.238511] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.238576] ehci_hcd 0000:00:10.3: irq 5, io mem 0xdfffee00 [ 0.250254] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.250485] usb usb1: configuration #1 chosen from 1 choice [ 0.250531] hub 1-0:1.0: USB hub found [ 0.250550] hub 1-0:1.0: 6 ports detected [ 0.250644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.250670] uhci_hcd: USB Universal Host Controller Interface driver [ 0.251000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 [ 0.251007] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.251022] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.251104] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.251135] uhci_hcd 0000:00:10.0: irq 5, io base 0x0000dc00 [ 0.251266] usb usb2: configuration #1 chosen from 1 choice [ 0.251310] hub 2-0:1.0: USB hub found [ 0.251326] hub 2-0:1.0: 2 ports detected [ 0.251394] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.251405] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.251458] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.251485] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e000 [ 0.251604] usb usb3: configuration #1 chosen from 1 choice [ 0.251646] hub 3-0:1.0: USB hub found [ 0.251657] hub 3-0:1.0: 2 ports detected [ 0.251916] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 0.251922] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.251933] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.251989] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.252015] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000e400 [ 0.252153] usb usb4: configuration #1 chosen from 1 choice [ 0.252193] hub 4-0:1.0: USB hub found [ 0.252207] hub 4-0:1.0: 2 ports detected [ 0.252344] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.252708] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.252722] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.252919] mice: PS/2 mouse device common for all mice [ 0.253113] rtc_cmos 00:08: RTC can wake from S4 [ 0.253180] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.253208] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.253382] device-mapper: uevent: version 1.0.3 [ 0.255902] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.257555] device-mapper: multipath: version 1.1.0 loaded [ 0.257562] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.260515] EISA: Probing bus 0 at eisa.0 [ 0.260557] EISA: Detected 0 cards. [ 0.260662] cpuidle: using governor ladder [ 0.260666] cpuidle: using governor menu [ 0.261308] TCP cubic registered [ 0.261491] NET: Registered protocol family 10 [ 0.262139] lo: Disabled Privacy Extensions [ 0.262604] NET: Registered protocol family 17 [ 0.262693] Using IPI No-Shortcut mode [ 0.262896] PM: Resume from disk failed. [ 0.262921] registered taskstats version 1 [ 0.263226] Magic number: 10:127:34 [ 0.263349] rtc_cmos 00:08: setting system clock to 2010-09-06 16:02:44 UTC (1283788964) [ 0.263354] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.263356] EDD information not available. [ 0.270921] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.769571] Freeing initrd memory: 7789k freed [ 0.826463] isapnp: No Plug & Play device found [ 0.826519] Freeing unused kernel memory: 660k freed [ 0.827654] Write protecting the kernel text: 4680k [ 0.827689] Write protecting the kernel read-only data: 1844k [ 0.862982] udev: starting version 151 [ 0.969859] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.122801] Floppy drive(s): fd0 is 1.44M [ 1.124202] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 1.124269] tulip 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 1.141888] FDC 0 is a post-1991 82077 [ 1.160125] usb 2-2: configuration #1 chosen from 1 choice [ 1.162011] hub 2-2:1.0: USB hub found [ 1.163925] hub 2-2:1.0: 3 ports detected [ 1.172399] eth0: Macronix 98715 PMAC rev 32 at Port 0xe800, EEPROM not present, 00:4c:69:6e:75:79, IRQ 5. [ 1.172456] pata_via 0000:00:11.1: version 0.3.4 [ 1.172478] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 1.177392] scsi0 : pata_via [ 1.177724] scsi1 : pata_via [ 1.181118] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.181123] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.363622] ata1.00: ATA-8: WDC WD2500AAJB-00WGA0, 00.02C01, max UDMA/100 [ 1.363627] ata1.00: 488397168 sectors, multi 16: LBA48 [ 1.363678] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A102, max UDMA/33 [ 1.363714] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.369095] ata1.00: configured for UDMA/33 [ 1.384264] ata1.01: configured for UDMA/33 [ 1.386843] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAJB-0 00.0 PQ: 0 ANSI: 5 [ 1.387108] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.391589] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A102 PQ: 0 ANSI: 5 [ 1.392236] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.404989] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.404995] Uniform CD-ROM driver Revision: 3.20 [ 1.405431] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.405645] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.405901] sd 0:0:0:0: [sda] Write Protect is off [ 1.405906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.405976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.406185] sda: sda1 [ 1.410379] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.445848] usb 2-2.1: new full speed USB device using uhci_hcd and address 3 [ 1.567949] usb 2-2.1: configuration #1 chosen from 1 choice [ 1.582073] ata2.00: ATA-7: Maxtor 6Y060L0, YAR41BW0, max UDMA/133 [ 1.582080] ata2.00: 120103200 sectors, multi 16: LBA [ 1.582128] ata2.01: ATAPI: HL-DT-ST GCE-8400B, 1.05, max MWDMA2 [ 1.582163] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.588470] ata2.00: configured for UDMA/33 [ 1.604263] ata2.01: configured for MWDMA2 [ 1.604635] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y060L0 YAR4 PQ: 0 ANSI: 5 [ 1.604994] sd 1:0:0:0: [sdb] 120103200 512-byte logical blocks: (61.4 GB/57.2 GiB) [ 1.605063] sd 1:0:0:0: [sdb] Write Protect is off [ 1.605067] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.605102] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.605420] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.605966] sdb: [ 1.606075] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8400B 1.05 PQ: 0 ANSI: 5 [ 1.616026] sdb1 < sdb5 > sdb2 sdb3 [ 1.641041] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.641359] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.641633] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.641857] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.649820] usb 2-2.2: new full speed USB device using uhci_hcd and address 4 [ 1.675832] usbcore: registered new interface driver hiddev [ 1.680670] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input5 [ 1.680972] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:10.0-2.1/input0 [ 1.681029] usbcore: registered new interface driver usbhid [ 1.681211] usbhid: v2.6:USB HID core driver [ 1.777441] usb 2-2.2: configuration #1 chosen from 1 choice [ 1.785661] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input6 [ 1.786437] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:10.0-2.2/input0 [ 1.857727] usb 2-2.3: new full speed USB device using uhci_hcd and address 5 [ 1.995862] usb 2-2.3: configuration #1 chosen from 1 choice [ 2.011736] EXT4-fs (sdb2): mounted filesystem with ordered data mode [ 14.525521] udev: starting version 151 [ 14.531475] Adding 5000184k swap on /dev/sdb5. Priority:-1 extents:1 across:5000184k [ 14.665708] lp: driver loaded but no devices found [ 14.704981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.819129] Linux agpgart interface v0.103 [ 15.054756] type=1505 audit(1283788979.288:2): operation="profile_load" pid=392 name="/sbin/dhclient3" [ 15.055407] type=1505 audit(1283788979.288:3): operation="profile_load" pid=392 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.055752] type=1505 audit(1283788979.288:4): operation="profile_load" pid=392 name="/usr/lib/connman/scripts/dhclient-script" [ 15.295128] irda_init() [ 15.295154] NET: Registered protocol family 23 [ 15.333666] parport_pc 00:04: reported by Plug and Play ACPI [ 15.333725] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.351664] vga16fb: initializing [ 15.351681] vga16fb: mapped to 0xc00a0000 [ 15.351803] fb0: VGA16 VGA frame buffer device [ 15.351971] agpgart: Detected VIA P4X266 chipset [ 15.355866] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 15.424515] lp0: using parport0 (interrupt-driven). [ 15.435337] Bluetooth: Core ver 2.15 [ 15.452226] NET: Registered protocol family 31 [ 15.452231] Bluetooth: HCI device and connection manager initialized [ 15.452237] Bluetooth: HCI socket layer initialized [ 15.475087] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.475771] usbcore: registered new interface driver btusb [ 15.502592] psmouse serio1: ID: 10 00 64 [ 15.583700] cfg80211: Calling CRDA to update world regulatory domain [ 15.588436] logips2pp: Detected unknown logitech mouse model 127 [ 15.649555] cfg80211: World regulatory domain updated: [ 15.649563] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.649568] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.649572] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.649576] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.649580] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.649584] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.651768] ppdev: user-space parallel port driver [ 15.768079] gameport: NS558 PnP Gameport is pnp00:05/gameport0, io 0x201, speed 641kHz [ 15.888908] ath5k 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 15.888976] ath5k 0000:00:0b.0: registered as 'phy0' [ 16.478538] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input7 [ 16.697288] Console: switching to colour frame buffer device 80x30 [ 17.113997] ath: EEPROM regdomain: 0x809c [ 17.114003] ath: EEPROM indicates we should expect a country code [ 17.114007] ath: doing EEPROM country->regdmn map search [ 17.114010] ath: country maps to regdmn code: 0x52 [ 17.114013] ath: Country alpha2 being used: CN [ 17.114016] ath: Regpair used: 0x52 [ 17.129634] phy0: Selected rate control algorithm 'minstrel' [ 17.130802] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) [ 17.131415] cfg80211: Calling CRDA for country: CN [ 17.131508] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 17.131656] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 17.149388] cfg80211: Regulatory domain changed to country: CN [ 17.149396] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.149400] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 17.149404] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 17.207272] EXT4-fs (sdb3): mounted filesystem with ordered data mode [ 17.630226] type=1505 audit(1283788981.864:5): operation="profile_load" pid=715 name="/usr/share/gdm/guest-session/Xsession" [ 17.641821] type=1505 audit(1283788981.876:6): operation="profile_replace" pid=716 name="/sbin/dhclient3" [ 17.642510] type=1505 audit(1283788981.876:7): operation="profile_replace" pid=716 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.642881] type=1505 audit(1283788981.876:8): operation="profile_replace" pid=716 name="/usr/lib/connman/scripts/dhclient-script" [ 17.677937] type=1505 audit(1283788981.912:9): operation="profile_load" pid=717 name="/usr/bin/evince" [ 17.707457] type=1505 audit(1283788981.940:10): operation="profile_load" pid=717 name="/usr/bin/evince-previewer" [ 17.728378] type=1505 audit(1283788981.964:11): operation="profile_load" pid=717 name="/usr/bin/evince-thumbnailer" [ 18.308953] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.529694] Bluetooth: L2CAP ver 2.14 [ 18.529701] Bluetooth: L2CAP socket layer initialized [ 18.567891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.567898] Bluetooth: BNEP filters: protocol multicast [ 18.640360] Bridge firewalling registered [ 18.676524] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.676531] Bluetooth: SCO socket layer initialized [ 18.921675] Bluetooth: RFCOMM TTY layer initialized [ 18.921686] Bluetooth: RFCOMM socket layer initialized [ 18.921690] Bluetooth: RFCOMM ver 1.11 [ 19.592652] [drm] Initialized drm 1.1.0 20060810 [ 19.598445] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 19.599825] [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0 [ 19.601009] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 19.601039] agpgart-via 0000:00:00.0: putting AGP V2 device into 1x mode [ 19.601107] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 19.664714] platform r128_cce.0: firmware: requesting r128/r128_cce.bin [ 27.092870] wlan0: direct probe to AP 00:23:51:3e:3f:69 (try 1) [ 27.092913] wlan0: deauthenticating from 00:23:51:3e:3f:69 by local choice (reason=3) [ 27.092949] wlan0: direct probe to AP 00:23:51:3e:3f:69 (try 1) [ 27.209211] wlan0: direct probe responded [ 27.209220] wlan0: authenticate with AP 00:23:51:3e:3f:69 (try 1) [ 27.212336] wlan0: authenticated [ 27.212379] wlan0: associate with AP 00:23:51:3e:3f:69 (try 1) [ 27.213820] wlan0: RX AssocResp from 00:23:51:3e:3f:69 (capab=0x431 status=0 aid=2) [ 27.213826] wlan0: associated [ 27.214907] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.215033] cfg80211: Calling CRDA for country: US [ 27.245368] cfg80211: Received country IE: [ 27.245376] cfg80211: Regulatory domain: US [ 27.245378] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.245383] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 27.245386] cfg80211: CRDA thinks this should applied: [ 27.245388] cfg80211: Regulatory domain: US [ 27.245390] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.245394] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 27.245399] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 27.245403] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.245407] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.245411] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.245415] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 27.245417] cfg80211: We intersect both of these and get: [ 27.245420] cfg80211: Regulatory domain: 98 [ 27.245422] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.245426] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 27.245435] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 27.245439] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 27.245442] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 27.245449] cfg80211: Current regulatory domain updated by AP to: US [ 27.245452] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.245456] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 28.296016] eth0: no IPv6 routers present [ 38.072038] wlan0: no IPv6 routers present