[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=4098138a-5361-4f27-ae5c-05fe5d68cde1 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fee0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fee0000 @ 10000-14000 [ 0.000000] RAMDISK: 377fc000 - 37feff76 [ 0.000000] ACPI: RSDP 00000000000f7c80 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 000000007fee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007feead00 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fee3280 07A2A (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007fee0000 00040 [ 0.000000] ACPI: SSDT 000000007feeaf00 00350 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 000000007feeb2c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 000000007feeb340 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007feeae40 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fee0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fee0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fc000 - 0037feff76] RAMDISK ==> [00377fc000 - 0037feff76] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30155] BRK ==> [0001a30000 - 0001a30155] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f5bd0] f5bd0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523887 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516620 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=4098138a-5361-4f27-ae5c-05fe5d68cde1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2a08000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2047892k/2096000k available (5422k kernel code, 452k absent, 47656k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3215.154 MHz processor. [ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6430.30 BogoMIPS (lpj=32151540) [ 0.010025] Security Framework initialized [ 0.010041] AppArmor: AppArmor initialized [ 0.010190] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011098] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011616] Mount-cache hash table entries: 256 [ 0.011725] Initializing cgroup subsys ns [ 0.011728] Initializing cgroup subsys cpuacct [ 0.011731] Initializing cgroup subsys memory [ 0.011738] Initializing cgroup subsys devices [ 0.011740] Initializing cgroup subsys freezer [ 0.011741] Initializing cgroup subsys net_cls [ 0.011756] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.011758] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.011759] CPU 0/0x0 -> Node 0 [ 0.011761] tseg: 007ff00000 [ 0.011762] CPU: Physical Processor ID: 0 [ 0.011763] CPU: Processor Core ID: 0 [ 0.011765] mce: CPU supports 5 MCE banks [ 0.011774] using C1E aware idle routine [ 0.011775] Performance Events: AMD PMU driver. [ 0.011778] ... version: 0 [ 0.011780] ... bit width: 48 [ 0.011781] ... generic registers: 4 [ 0.011782] ... value mask: 0000ffffffffffff [ 0.011783] ... max period: 00007fffffffffff [ 0.011784] ... fixed-purpose events: 0 [ 0.011785] ... event mask: 000000000000000f [ 0.012882] ACPI: Core revision 20090903 [ 0.023477] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.023486] ftrace: allocating 22527 entries in 89 pages [ 0.027942] Setting APIC routing to flat [ 0.028371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128399] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.280064] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.280075] Brought up 2 CPUs [ 0.280076] Total of 2 processors activated (12859.92 BogoMIPS). [ 0.280252] CPU0 attaching sched-domain: [ 0.280254] domain 0: span 0-1 level MC [ 0.280256] groups: 0 1 [ 0.280260] CPU1 attaching sched-domain: [ 0.280261] domain 0: span 0-1 level MC [ 0.280262] groups: 1 0 [ 0.280323] devtmpfs: initialized [ 0.280323] regulator: core version 0.5 [ 0.280323] Time: 19:05:01 Date: 09/01/10 [ 0.280323] NET: Registered protocol family 16 [ 0.280323] node 0 link 0: io port [7000, ffff] [ 0.280323] TOM: 0000000080000000 aka 2048M [ 0.280323] node 0 link 0: mmio [a0000, bffff] [ 0.280323] node 0 link 0: mmio [80000000, efffffff] [ 0.280323] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.280323] Trying to unpack rootfs image as initramfs... [ 0.280323] [ 0.280323] node 0 link 0: mmio [f0000000, f03fffff] [ 0.280323] bus: [00,03] on node 0 link 0 [ 0.280323] bus: 00 index 0 io port: [0, ffff] [ 0.280323] bus: 00 index 1 mmio: [a0000, bffff] [ 0.280323] bus: 00 index 2 mmio: [80000000, f3ffffff] [ 0.280323] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.280323] ACPI: bus type pci registered [ 0.280323] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.280323] PCI: MCFG area at f0000000 reserved in E820 [ 0.281156] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.281157] PCI: Using configuration type 1 for base access [ 0.290083] bio: create slab at 0 [ 0.290752] ACPI: EC: Look up EC in DSDT [ 0.298039] ACPI: Interpreter enabled [ 0.298045] ACPI: (supports S0 S1 S3 S4 S5) [ 0.298067] ACPI: Using IOAPIC for interrupt routing [ 0.304674] ACPI: No dock devices found. [ 0.304756] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.304956] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.304965] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.304969] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.304987] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.304991] pci 0000:00:01.1: PME# disabled [ 0.305033] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.305049] pci 0000:00:02.0: supports D1 D2 [ 0.305051] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305053] pci 0000:00:02.0: PME# disabled [ 0.305068] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.305085] pci 0000:00:02.1: supports D1 D2 [ 0.305086] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305088] pci 0000:00:02.1: PME# disabled [ 0.305109] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.305132] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7] [ 0.305134] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3] [ 0.305137] pci 0000:00:05.0: reg 18 io port: [0x970-0x977] [ 0.305140] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73] [ 0.305142] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.305145] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.305170] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7] [ 0.305173] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3] [ 0.305175] pci 0000:00:05.1: reg 18 io port: [0x960-0x967] [ 0.305178] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63] [ 0.305180] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f] [ 0.305183] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.305209] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407] [ 0.305212] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003] [ 0.305215] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07] [ 0.305217] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803] [ 0.305220] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f] [ 0.305223] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.305271] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.305290] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.305292] pci 0000:00:06.1: PME# disabled [ 0.305321] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.305324] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007] [ 0.305326] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.305329] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.305346] pci 0000:00:08.0: supports D1 D2 [ 0.305348] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305351] pci 0000:00:08.0: PME# disabled [ 0.305376] pci 0000:00:09.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff] [ 0.305378] pci 0000:00:09.0: reg 14 io port: [0xac00-0xac07] [ 0.305381] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff] [ 0.305384] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f] [ 0.305401] pci 0000:00:09.0: supports D1 D2 [ 0.305403] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305406] pci 0000:00:09.0: PME# disabled [ 0.305437] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305439] pci 0000:00:0e.0: PME# disabled [ 0.305466] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.305468] pci 0000:00:0f.0: PME# disabled [ 0.305552] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff] [ 0.305557] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff] [ 0.305579] pci 0000:01:0b.0: supports D1 D2 [ 0.305581] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.305583] pci 0000:01:0b.0: PME# disabled [ 0.305600] pci 0000:00:06.0: transparent bridge [ 0.305603] pci 0000:00:06.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.305659] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff] [ 0.305665] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdde0000-0xfddeffff] [ 0.305685] pci 0000:02:00.0: PME# supported from D3hot [ 0.305689] pci 0000:02:00.0: PME# disabled [ 0.305723] pci 0000:02:00.1: reg 10 io port: [0x9c00-0x9c07] [ 0.305729] pci 0000:02:00.1: reg 14 io port: [0x9800-0x9803] [ 0.305735] pci 0000:02:00.1: reg 18 io port: [0x9400-0x9407] [ 0.305740] pci 0000:02:00.1: reg 1c io port: [0x9000-0x9003] [ 0.305746] pci 0000:02:00.1: reg 20 io port: [0x8c00-0x8c0f] [ 0.305805] pci 0000:00:0e.0: bridge io port: [0x8000-0x9fff] [ 0.305807] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.305826] pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.305832] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.305837] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.305841] pci 0000:03:00.0: reg 24 io port: [0x7c00-0x7c7f] [ 0.305844] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff] [ 0.305884] pci 0000:00:0f.0: bridge io port: [0x7000-0x7fff] [ 0.305886] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.305889] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.305897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.306106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.341126] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341231] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341339] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341443] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341547] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341653] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.341759] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.341863] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.341968] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342072] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342178] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.342282] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 0.342388] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.342492] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342597] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342702] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342806] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.342911] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.343016] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.343122] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.343258] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.343393] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.343526] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.343659] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.343793] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.343927] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.344064] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.344202] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.344336] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.344472] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.344607] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.344741] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.344875] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.345009] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.345145] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.345279] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.345414] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.345549] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.345683] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.345817] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.345908] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.345910] vgaarb: loaded [ 0.345986] SCSI subsystem initialized [ 0.346064] libata version 3.00 loaded. [ 0.346121] usbcore: registered new interface driver usbfs [ 0.346129] usbcore: registered new interface driver hub [ 0.346149] usbcore: registered new device driver usb [ 0.346250] ACPI: WMI: Mapper loaded [ 0.346251] PCI: Using ACPI for IRQ routing [ 0.346361] NetLabel: Initializing [ 0.346362] NetLabel: domain hash size = 128 [ 0.346363] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.346374] NetLabel: unlabeled traffic allowed by default [ 0.346403] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.346406] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.350048] Switching to clocksource hpet [ 0.351283] AppArmor: AppArmor Filesystem Enabled [ 0.351301] pnp: PnP ACPI init [ 0.351317] ACPI: bus type pnp registered [ 0.354705] pnp: PnP ACPI: found 12 devices [ 0.354707] ACPI: ACPI bus type pnp unregistered [ 0.354715] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.354717] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.354719] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.354720] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.354722] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.354726] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.354730] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.354732] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.354734] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.354739] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.354743] system 00:0b: iomem range 0xd2800-0xd3fff has been reserved [ 0.354745] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.354747] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.354749] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.354751] system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.354753] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 0.354755] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.354757] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.354759] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved [ 0.354761] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.354763] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.354765] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.354767] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.354769] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.354771] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.359431] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.359433] pci 0000:00:06.0: IO window: disabled [ 0.359435] pci 0000:00:06.0: MEM window: 0xfde00000-0xfdefffff [ 0.359437] pci 0000:00:06.0: PREFETCH window: disabled [ 0.359440] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 0.359441] pci 0000:00:0e.0: IO window: 0x8000-0x9fff [ 0.359443] pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff [ 0.359445] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.359448] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03 [ 0.359449] pci 0000:00:0f.0: IO window: 0x7000-0x7fff [ 0.359451] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfbffffff [ 0.359453] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.359459] pci 0000:00:06.0: setting latency timer to 64 [ 0.359463] pci 0000:00:0e.0: setting latency timer to 64 [ 0.359467] pci 0000:00:0f.0: setting latency timer to 64 [ 0.359470] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.359471] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.359473] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.359475] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.359476] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.359478] pci_bus 0000:02: resource 0 io: [0x8000-0x9fff] [ 0.359480] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.359481] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff] [ 0.359483] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.359484] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.359512] NET: Registered protocol family 2 [ 0.359613] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.360378] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.362122] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.362573] TCP: Hash tables configured (established 262144 bind 65536) [ 0.362575] TCP reno registered [ 0.362661] NET: Registered protocol family 1 [ 0.380092] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.380135] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.380177] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.380218] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.380263] pci 0000:00:06.1: Enabling HT MSI Mapping [ 0.380314] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.380369] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.380425] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.380484] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.380500] pci 0000:03:00.0: Boot video device [ 0.380761] Scanning for low memory corruption every 60 seconds [ 0.380857] audit: initializing netlink socket (disabled) [ 0.380866] type=2000 audit(1283367901.380:1): initialized [ 0.386773] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.387737] VFS: Disk quotas dquot_6.5.2 [ 0.387776] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.388199] fuse init (API version 7.13) [ 0.388255] msgmni has been set to 3999 [ 0.388410] alg: No test for stdrng (krng) [ 0.388448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.388451] io scheduler noop registered [ 0.388452] io scheduler anticipatory registered [ 0.388453] io scheduler deadline registered [ 0.388480] io scheduler cfq registered (default) [ 0.388592] alloc irq_desc for 24 on node 0 [ 0.388593] alloc kstat_irqs on node 0 [ 0.388599] pcieport 0000:00:0e.0: irq 24 for MSI/MSI-X [ 0.388603] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.388673] alloc irq_desc for 25 on node 0 [ 0.388674] alloc kstat_irqs on node 0 [ 0.388677] pcieport 0000:00:0f.0: irq 25 for MSI/MSI-X [ 0.388680] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.388723] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.388740] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.388821] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.388824] ACPI: Power Button [PWRB] [ 0.388868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.388870] ACPI: Power Button [PWRF] [ 0.388908] fan PNP0C0B:00: registered as cooling_device0 [ 0.388912] ACPI: Fan [FAN] (on) [ 0.389192] processor LNXCPU:00: registered as cooling_device1 [ 0.389218] processor LNXCPU:01: registered as cooling_device2 [ 0.392763] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.392769] ACPI: Thermal Zone [THRM] (40 C) [ 0.393752] Linux agpgart interface v0.103 [ 0.393778] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.393864] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.394086] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.394742] brd: module loaded [ 0.395042] loop: module loaded [ 0.395100] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.395278] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.395567] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.395570] alloc irq_desc for 23 on node 0 [ 0.395572] alloc kstat_irqs on node 0 [ 0.395580] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.395598] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.395603] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.395852] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.395854] alloc irq_desc for 22 on node 0 [ 0.395855] alloc kstat_irqs on node 0 [ 0.395861] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.395874] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.395879] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.396124] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.396126] alloc irq_desc for 21 on node 0 [ 0.396127] alloc kstat_irqs on node 0 [ 0.396133] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.396150] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.396155] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.396186] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001) [ 0.396407] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 0.396409] alloc irq_desc for 16 on node 0 [ 0.396410] alloc kstat_irqs on node 0 [ 0.396415] pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 0.396433] pata_acpi 0000:02:00.1: setting latency timer to 64 [ 0.396440] pata_acpi 0000:02:00.1: PCI INT B disabled [ 0.396727] Fixed MDIO Bus: probed [ 0.396751] PPP generic driver version 2.4.2 [ 0.396779] tun: Universal TUN/TAP device driver, 1.6 [ 0.396780] tun: (C) 1999-2004 Max Krasnyansky [ 0.396840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.397089] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.397090] alloc irq_desc for 20 on node 0 [ 0.397092] alloc kstat_irqs on node 0 [ 0.397097] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.397109] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.397111] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.397135] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.397154] ehci_hcd 0000:00:02.1: debug port 1 [ 0.397159] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.397177] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 0.410013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.410070] usb usb1: configuration #1 chosen from 1 choice [ 0.410090] hub 1-0:1.0: USB hub found [ 0.410096] hub 1-0:1.0: 10 ports detected [ 0.410144] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.410387] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.410389] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.410396] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.410398] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.410425] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.410444] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.423733] Freeing initrd memory: 8143k freed [ 0.472065] usb usb2: configuration #1 chosen from 1 choice [ 0.472082] hub 2-0:1.0: USB hub found [ 0.472088] hub 2-0:1.0: 10 ports detected [ 0.472133] uhci_hcd: USB Universal Host Controller Interface driver [ 0.472188] PNP: No PS/2 controller found. Probing ports directly. [ 0.472564] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.472568] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.472616] mice: PS/2 mouse device common for all mice [ 0.472689] rtc_cmos 00:05: RTC can wake from S4 [ 0.472715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.472747] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.472838] device-mapper: uevent: version 1.0.3 [ 0.472937] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.473008] device-mapper: multipath: version 1.1.0 loaded [ 0.473010] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.473164] cpuidle: using governor ladder [ 0.473165] cpuidle: using governor menu [ 0.473415] TCP cubic registered [ 0.473496] NET: Registered protocol family 10 [ 0.473818] lo: Disabled Privacy Extensions [ 0.474018] NET: Registered protocol family 17 [ 0.474042] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ processors (2 cpu cores) (version 2.20.00) [ 0.474091] powernow-k8: 0 : fid 0x18 (3200 MHz), vid 0x6 [ 0.474092] powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x8 [ 0.474094] powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0xa [ 0.474095] powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xc [ 0.474096] powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xe [ 0.474098] powernow-k8: 5 : fid 0xe (2200 MHz), vid 0x10 [ 0.474099] powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10 [ 0.474101] powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10 [ 0.474102] powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 [ 0.474177] PM: Resume from disk failed. [ 0.474186] registered taskstats version 1 [ 0.474462] Magic number: 10:620:90 [ 0.474537] rtc_cmos 00:05: setting system clock to 2010-09-01 19:05:01 UTC (1283367901) [ 0.474539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.474540] EDD information not available. [ 0.474578] Freeing unused kernel memory: 880k freed [ 0.474904] Write protecting the kernel read-only data: 7696k [ 0.486480] udev: starting version 151 [ 0.535978] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.536271] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.536276] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.536280] forcedeth 0000:00:08.0: setting latency timer to 64 [ 0.536326] nv_probe: set workaround bit for reversed mac addr [ 0.553618] pata_jmicron 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 0.553653] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 0.569017] scsi0 : pata_jmicron [ 0.575637] scsi1 : pata_jmicron [ 0.575724] ata1: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16 [ 0.575726] ata2: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16 [ 0.577450] ahci 0000:02:00.0: version 3.0 [ 0.577800] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 0.577804] alloc irq_desc for 19 on node 0 [ 0.577805] alloc kstat_irqs on node 0 [ 0.577814] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 0.578129] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 0.578132] ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 0.590111] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.590113] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.590117] ahci 0000:02:00.0: setting latency timer to 64 [ 0.590274] scsi2 : ahci [ 0.590345] scsi3 : ahci [ 0.590380] ata3: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16 [ 0.590383] ata4: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16 [ 0.630055] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 0.940024] ata3: SATA link down (SStatus 0 SControl 300) [ 0.942527] ata4: SATA link down (SStatus 0 SControl 300) [ 1.060635] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:e7:58:f6 [ 1.060638] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.060687] pata_amd 0000:00:04.0: version 0.4.1 [ 1.060720] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.060776] scsi4 : pata_amd [ 1.060840] scsi5 : pata_amd [ 1.061358] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.061360] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.061489] sata_nv 0000:00:05.0: version 3.5 [ 1.061496] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.061497] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.061855] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.061958] scsi6 : sata_nv [ 1.062056] scsi7 : sata_nv [ 1.062207] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 1.062209] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 1.062500] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.062503] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.062506] forcedeth 0000:00:09.0: setting latency timer to 64 [ 1.062544] nv_probe: set workaround bit for reversed mac addr [ 1.070028] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 1.260348] ata5.01: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100 [ 1.260350] ata5.01: 488397168 sectors, multi 1: LBA48 [ 1.260366] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000) ACPI=0x3f01f (600:20:0x1c) [ 1.280272] ata5.01: configured for UDMA/100 [ 1.280346] scsi 4:0:1:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 1.280458] sd 4:0:1:0: Attached scsi generic sg0 type 0 [ 1.280517] ata6: port disabled. ignoring. [ 1.280522] sd 4:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.280559] sd 4:0:1:0: [sda] Write Protect is off [ 1.280561] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.280578] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.280671] sda: sda1 [ 1.289904] sd 4:0:1:0: [sda] Attached SCSI disk [ 1.303074] usb 2-3: configuration #1 chosen from 1 choice [ 1.306066] hub 2-3:1.0: USB hub found [ 1.309033] hub 2-3:1.0: 4 ports detected [ 1.550031] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.590640] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1b:fc:e7:76:3e [ 1.590643] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.590710] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.590713] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.591071] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.591206] scsi8 : sata_nv [ 1.591287] scsi9 : sata_nv [ 1.591438] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 [ 1.591440] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 [ 1.591510] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.591513] sata_nv 0000:00:05.2: Using SWNCQ mode [ 1.591869] sata_nv 0000:00:05.2: setting latency timer to 64 [ 1.592001] scsi10 : sata_nv [ 1.592161] scsi11 : sata_nv [ 1.592314] ata11: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 [ 1.592316] ata12: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 [ 1.596082] ata7.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 1.596084] ata7.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.611034] usb 2-3.1: new low speed USB device using ohci_hcd and address 3 [ 1.631082] ata7.00: configured for UDMA/133 [ 1.631153] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.631273] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1.631298] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.631353] sd 6:0:0:0: [sdb] Write Protect is off [ 1.631355] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.631371] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.631566] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 1.658537] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.735116] usb 2-3.1: configuration #1 chosen from 1 choice [ 1.745268] usbcore: registered new interface driver hiddev [ 1.752249] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input3 [ 1.752315] generic-usb 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:02.0-3.1/input0 [ 1.766061] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.1/input/input4 [ 1.766177] generic-usb 0003:046D:C226.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:02.0-3.1/input1 [ 1.766193] usbcore: registered new interface driver usbhid [ 1.766195] usbhid: v2.6:USB HID core driver [ 1.821038] usb 2-3.2: new full speed USB device using ohci_hcd and address 4 [ 1.932809] ata11: SATA link down (SStatus 0 SControl 300) [ 1.932815] ata9: SATA link down (SStatus 0 SControl 300) [ 1.950098] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000164287d] [ 1.961107] usb 2-3.2: configuration #1 chosen from 1 choice [ 1.976246] input: Logitech G500 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input5 [ 1.976324] generic-usb 0003:046D:C068.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:02.0-3.2/input0 [ 1.992116] input: Logitech G500 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.1/input/input6 [ 1.992190] generic-usb 0003:046D:C068.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:02.0-3.2/input1 [ 2.067812] kjournald starting. Commit interval 5 seconds [ 2.067819] EXT3-fs: mounted filesystem with ordered data mode. [ 2.072040] usb 2-3.4: new full speed USB device using ohci_hcd and address 5 [ 2.120040] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.140114] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB01, max UDMA/100 [ 2.180123] ata8.00: configured for UDMA/100 [ 2.181363] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB01 PQ: 0 ANSI: 5 [ 2.185436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.185438] Uniform CD-ROM driver Revision: 3.20 [ 2.185523] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 2.185567] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 2.202077] usb 2-3.4: configuration #1 chosen from 1 choice [ 2.229097] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.4/2-3.4:1.0/input/input7 [ 2.229163] generic-usb 0003:046D:C227.0005: input,hiddev98,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:02.0-3.4/input0 [ 2.520308] ata10: SATA link down (SStatus 0 SControl 300) [ 2.860305] ata12: SATA link down (SStatus 0 SControl 300) [ 19.159760] udev: starting version 151 [ 19.176274] Adding 4200988k swap on /dev/sdb5. Priority:-1 extents:1 across:4200988k [ 19.194231] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 19.194236] ACPI: resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c45] [ 19.194237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.194239] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 19.234652] EDAC MC: Ver: 2.1.0 Aug 19 2010 [ 19.253638] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 19.256805] vga16fb: initializing [ 19.256809] vga16fb: mapped to 0xffff8800000a0000 [ 19.256864] fb0: VGA16 VGA frame buffer device [ 19.273626] lp: driver loaded but no devices found [ 19.373108] type=1505 audit(1283360720.395:2): operation="profile_load" pid=677 name="/sbin/dhclient3" [ 19.373287] type=1505 audit(1283360720.395:3): operation="profile_load" pid=677 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.373388] type=1505 audit(1283360720.395:4): operation="profile_load" pid=677 name="/usr/lib/connman/scripts/dhclient-script" [ 19.431220] nvidia: module license 'NVIDIA' taints kernel. [ 19.431223] Disabling lock debugging due to kernel taint [ 19.579474] EXT3 FS on sdb6, internal journal [ 19.707655] EDAC amd64_edac: Ver: 3.2.0 Aug 19 2010 [ 19.875674] parport_pc 00:09: reported by Plug and Play ACPI [ 19.875698] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 19.879419] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 19.879426] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 19.879427] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 19.879428] (Note that use of the override may cause unknown side effects.) [ 19.879444] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 19.942780] ppdev: user-space parallel port driver [ 19.943944] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 19.943948] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 19.943951] hda_intel: Disable MSI for Nvidia chipset [ 19.943974] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 19.956976] lp0: using parport0 (interrupt-driven). [ 19.996308] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 19.996311] nvidia 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 19.996316] nvidia 0000:03:00.0: setting latency timer to 64 [ 19.996320] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 19.996487] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 20.019875] Console: switching to colour frame buffer device 80x30 [ 20.389454] kjournald starting. Commit interval 5 seconds [ 20.389986] EXT3 FS on sdb7, internal journal [ 20.389990] EXT3-fs: mounted filesystem with ordered data mode. [ 21.775523] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input8 [ 23.819162] input: G15 Extra Keys as /devices/virtual/input/input9 [ 24.015084] type=1505 audit(1283360725.037:5): operation="profile_load" pid=1062 name="/usr/share/gdm/guest-session/Xsession" [ 24.016276] type=1505 audit(1283360725.037:6): operation="profile_replace" pid=1063 name="/sbin/dhclient3" [ 24.016465] type=1505 audit(1283360725.037:7): operation="profile_replace" pid=1063 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.016569] type=1505 audit(1283360725.037:8): operation="profile_replace" pid=1063 name="/usr/lib/connman/scripts/dhclient-script" [ 24.020146] type=1505 audit(1283360725.037:9): operation="profile_load" pid=1064 name="/usr/bin/evince" [ 24.021070] alloc irq_desc for 26 on node 0 [ 24.021073] alloc kstat_irqs on node 0 [ 24.021080] forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X [ 24.021264] eth0: no link during initialization. [ 24.021876] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.022831] type=1505 audit(1283360725.047:10): operation="profile_load" pid=1064 name="/usr/bin/evince-previewer" [ 24.024311] type=1505 audit(1283360725.047:11): operation="profile_load" pid=1064 name="/usr/bin/evince-thumbnailer" [ 24.052436] alloc irq_desc for 27 on node 0 [ 24.052440] alloc kstat_irqs on node 0 [ 24.052448] forcedeth 0000:00:09.0: irq 27 for MSI/MSI-X