[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1dff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFC000000 write-back [ 0.000000] 3 base 01C000000 mask FFE000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] modified: 000000001dff0000 - 000000001dffffc0 (ACPI data) [ 0.000000] modified: 000000001dffffc0 - 000000001e000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001dff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001dc00000 page 2M [ 0.000000] 001dc00000 - 001dff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1dff0000 @ 7000-c000 [ 0.000000] RAMDISK: 15baa000 - 16833980 [ 0.000000] ACPI: RSDP 000e2010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 1dfffbc0 00030 (v01 INSYDE RSDT_000 00000001 _CSI 00010101) [ 0.000000] ACPI: FACP 1dfffa50 00084 (v01 INSYDE FACP_000 00000100 _CSI 00010101) [ 0.000000] ACPI: DSDT 1dffc560 034E2 (v01 INSYDE 8640 00001002 INTL 02002036) [ 0.000000] ACPI: FACS 1dffffc0 00040 [ 0.000000] ACPI: APIC 1dfffae0 00068 (v01 INSYDE APIC_000 30303030 0000 30303030) [ 0.000000] ACPI: BOOT 1dfffb50 00028 (v01 INSYDE ISC_BOOT 00000100 _CSI 00010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1dff0000 [ 0.000000] low ram: 0 - 1dff0000 [ 0.000000] node 0 low ram: 00000000 - 1dff0000 [ 0.000000] node 0 bootmap 00008000 - 0000bc00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [0015baa000 - 0016833980] RAMDISK ==> [0015baa000 - 0016833980] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e1138] BRK ==> [00008de000 - 00008e1138] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001dff0 [ 0.000000] HighMem 0x0001dff0 -> 0x0001dff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001dff0 [ 0.000000] On node 0 totalpages: 122763 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 117840 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121803 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=f1c405fa-78fa-4dbc-99c7-8b256296c530 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 462916k/491456k available (4679k kernel code, 27708k reserved, 2124k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xde7f0000 - 0xff7fe000 ( 528 MB) [ 0.000000] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.680 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.36 BogoMIPS (lpj=11198720) [ 0.004031] Security Framework initialized [ 0.004056] AppArmor: AppArmor initialized [ 0.004066] Mount-cache hash table entries: 512 [ 0.004244] Initializing cgroup subsys ns [ 0.004250] Initializing cgroup subsys cpuacct [ 0.004256] Initializing cgroup subsys memory [ 0.004267] Initializing cgroup subsys devices [ 0.004271] Initializing cgroup subsys freezer [ 0.004274] Initializing cgroup subsys net_cls [ 0.004303] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004307] CPU: L2 cache: 512K [ 0.004311] CPU: Hyper-Threading is disabled [ 0.004316] mce: CPU supports 4 MCE banks [ 0.004329] CPU0: Thermal monitoring enabled (TM1) [ 0.004341] Performance Events: no PMU driver, software events only. [ 0.004350] Checking 'hlt' instruction... OK. [ 0.020993] SMP alternatives: switching to UP code [ 0.032252] ACPI: Core revision 20090903 [ 0.040011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040020] ftrace: allocating 21780 entries in 43 pages [ 0.044121] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087643] CPU0: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (5599.36 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 20:54:47 Date: 08/29/10 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.088001] PCI: PCI BIOS revision 2.10 entry at 0xe8994, last bus=1 [ 0.088001] PCI: Using configuration type 1 for base access [ 0.088001] bio: create slab at 0 [ 0.088001] ACPI: EC: Look up EC in DSDT [ 0.088001] ACPI: Executed 1 blocks of module-level executable AML code [ 0.089904] ACPI: Interpreter enabled [ 0.089917] ACPI: (supports S0 S3 S4 S5) [ 0.089942] ACPI: Using IOAPIC for interrupt routing [ 0.094322] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.094506] ACPI: No dock devices found. [ 0.094687] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.094751] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.094921] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.094977] pci 0000:00:02.1: reg 20 io port: [0x00-0x1f] [ 0.095045] pci 0000:00:02.5: reg 20 io port: [0x1100-0x110f] [ 0.095104] pci 0000:00:02.6: reg 10 io port: [0xe000-0xe0ff] [ 0.095112] pci 0000:00:02.6: reg 14 io port: [0xe100-0xe17f] [ 0.095163] pci 0000:00:02.6: supports D1 D2 [ 0.095166] pci 0000:00:02.6: PME# supported from D3hot D3cold [ 0.095172] pci 0000:00:02.6: PME# disabled [ 0.095213] pci 0000:00:02.7: reg 10 io port: [0xe200-0xe2ff] [ 0.095222] pci 0000:00:02.7: reg 14 io port: [0xe300-0xe37f] [ 0.095272] pci 0000:00:02.7: supports D1 D2 [ 0.095275] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.095280] pci 0000:00:02.7: PME# disabled [ 0.095320] pci 0000:00:03.0: reg 10 32bit mmio: [0x0d8000-0x0d8fff] [ 0.095375] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.095380] pci 0000:00:03.0: PME# disabled [ 0.095419] pci 0000:00:03.1: reg 10 32bit mmio: [0x0da000-0x0dafff] [ 0.095473] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.095478] pci 0000:00:03.1: PME# disabled [ 0.095520] pci 0000:00:03.3: reg 10 32bit mmio: [0xf4000000-0xf4000fff] [ 0.095575] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.095580] pci 0000:00:03.3: PME# disabled [ 0.095627] pci 0000:00:04.0: reg 10 io port: [0xe400-0xe4ff] [ 0.095635] pci 0000:00:04.0: reg 14 32bit mmio: [0xf4001000-0xf4001fff] [ 0.095666] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.095689] pci 0000:00:04.0: supports D1 D2 [ 0.095691] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.095697] pci 0000:00:04.0: PME# disabled [ 0.095746] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.095769] pci 0000:00:09.0: supports D1 D2 [ 0.095772] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.095777] pci 0000:00:09.0: PME# disabled [ 0.095858] pci 0000:01:00.0: reg 10 32bit mmio pref: [0x90000000-0x97ffffff] [ 0.095865] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe001ffff] [ 0.095872] pci 0000:01:00.0: reg 18 io port: [0xc000-0xc07f] [ 0.095908] pci 0000:01:00.0: supports D1 D2 [ 0.095951] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff] [ 0.095956] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xefffffff] [ 0.095962] pci 0000:00:01.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff] [ 0.096013] pci_bus 0000:00: on NUMA node 0 [ 0.096019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.105695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11) [ 0.105852] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.106017] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11) [ 0.106174] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11) [ 0.106334] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 10) [ 0.106490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10) [ 0.106645] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10) [ 0.106805] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10) [ 0.106965] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.106969] vgaarb: loaded [ 0.107139] SCSI subsystem initialized [ 0.107239] libata version 3.00 loaded. [ 0.107338] usbcore: registered new interface driver usbfs [ 0.107354] usbcore: registered new interface driver hub [ 0.107385] usbcore: registered new device driver usb [ 0.107557] ACPI: WMI: Mapper loaded [ 0.107560] PCI: Using ACPI for IRQ routing [ 0.107740] NetLabel: Initializing [ 0.107743] NetLabel: domain hash size = 128 [ 0.107744] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.107765] NetLabel: unlabeled traffic allowed by default [ 0.107822] Switching to clocksource tsc [ 0.107999] AppArmor: AppArmor Filesystem Enabled [ 0.107999] pnp: PnP ACPI init [ 0.107999] ACPI: bus type pnp registered [ 0.108597] pnp: PnP ACPI: found 10 devices [ 0.108601] ACPI: ACPI bus type pnp unregistered [ 0.108608] PnPBIOS: Disabled by ACPI PNP [ 0.108625] system 00:03: iomem range 0x0-0x9ffff could not be reserved [ 0.108630] system 00:03: iomem range 0xd0000-0xd7fff has been reserved [ 0.108634] system 00:03: iomem range 0xe0000-0xfffff could not be reserved [ 0.108638] system 00:03: iomem range 0x100000-0x1dffffff could not be reserved [ 0.108642] system 00:03: iomem range 0xfff80000-0xffffffff has been reserved [ 0.108646] system 00:03: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.108649] system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.108658] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.108663] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.108667] system 00:05: ioport range 0x680-0x6ff has been reserved [ 0.108670] system 00:05: ioport range 0x77c-0x77f has been reserved [ 0.108674] system 00:05: ioport range 0x200-0x20f has been reserved [ 0.108677] system 00:05: ioport range 0x1000-0x10fe has been reserved [ 0.108681] system 00:05: iomem range 0x1e000000-0x1fffffff could not be reserved [ 0.143449] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.143453] pci 0000:00:01.0: IO window: 0xc000-0xdfff [ 0.143460] pci 0000:00:01.0: MEM window: 0xe0000000-0xefffffff [ 0.143466] pci 0000:00:01.0: PREFETCH window: 0x90000000-0x9fffffff [ 0.143475] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02 [ 0.143478] pci 0000:00:09.0: IO window: 0x001400-0x0014ff [ 0.143483] pci 0000:00:09.0: IO window: 0x001800-0x0018ff [ 0.143489] pci 0000:00:09.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.143494] pci 0000:00:09.0: MEM window: 0x24000000-0x27ffffff [ 0.143522] alloc irq_desc for 17 on node -1 [ 0.143524] alloc kstat_irqs on node -1 [ 0.143533] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.143541] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.143544] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.143548] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.143551] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff] [ 0.143554] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff] [ 0.143557] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 0.143560] pci_bus 0000:02: resource 1 io: [0x1800-0x18ff] [ 0.143563] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.143567] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] [ 0.143615] NET: Registered protocol family 2 [ 0.143738] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.144085] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.144203] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.144294] TCP: Hash tables configured (established 16384 bind 16384) [ 0.144296] TCP reno registered [ 0.144401] NET: Registered protocol family 1 [ 0.144474] pci 0000:01:00.0: Boot video device [ 0.144593] Simple Boot Flag at 0x37 set to 0x1 [ 0.144716] cpufreq-nforce2: No nForce2 chipset. [ 0.144752] Scanning for low memory corruption every 60 seconds [ 0.144905] audit: initializing netlink socket (disabled) [ 0.144922] type=2000 audit(1283115287.144:1): initialized [ 0.153713] Trying to unpack rootfs image as initramfs... [ 0.164640] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.166401] VFS: Disk quotas dquot_6.5.2 [ 0.166477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.172255] fuse init (API version 7.13) [ 0.172418] msgmni has been set to 904 [ 0.172754] alg: No test for stdrng (krng) [ 0.172838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.172842] io scheduler noop registered [ 0.172844] io scheduler anticipatory registered [ 0.172847] io scheduler deadline registered [ 0.172899] io scheduler cfq registered (default) [ 0.173034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.173065] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.173950] ACPI: AC Adapter [AC] (on-line) [ 0.174044] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.174053] ACPI: Sleep Button [SBTN] [ 0.174109] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.174792] ACPI: Lid Switch [LID] [ 0.174878] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.174882] ACPI: Power Button [PWRF] [ 0.175154] processor LNXCPU:00: registered as cooling_device0 [ 0.184598] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.185019] alloc irq_desc for 18 on node -1 [ 0.185022] alloc kstat_irqs on node -1 [ 0.185033] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.185041] serial 0000:00:02.6: PCI INT C disabled [ 0.186246] brd: module loaded [ 0.186832] loop: module loaded [ 0.186970] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.187148] pata_sis 0000:00:02.5: version 0.5.2 [ 0.187547] isapnp: Scanning for PnP cards... [ 0.193200] scsi0 : pata_sis [ 0.193442] scsi1 : pata_sis [ 0.194839] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 0.194843] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 0.196055] Fixed MDIO Bus: probed [ 0.196221] PPP generic driver version 2.4.2 [ 0.196635] ACPI: Battery Slot [BAT0] (battery present) [ 0.199116] tun: Universal TUN/TAP device driver, 1.6 [ 0.199120] tun: (C) 1999-2004 Max Krasnyansky [ 0.199262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.199305] alloc irq_desc for 23 on node -1 [ 0.199309] alloc kstat_irqs on node -1 [ 0.199319] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.199343] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.199384] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.199436] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.199456] ehci_hcd 0000:00:03.3: irq 23, io mem 0xf4000000 [ 0.247806] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.248001] usb usb1: configuration #1 chosen from 1 choice [ 0.248042] hub 1-0:1.0: USB hub found [ 0.248066] hub 1-0:1.0: 6 ports detected [ 0.248163] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.248201] alloc irq_desc for 20 on node -1 [ 0.248205] alloc kstat_irqs on node -1 [ 0.248215] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.248225] ohci_hcd 0000:00:03.0: setting latency timer to 64 [ 0.248229] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.248297] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.248331] ohci_hcd 0000:00:03.0: irq 20, io mem 0x000d8000 [ 0.333889] usb usb2: configuration #1 chosen from 1 choice [ 0.333930] hub 2-0:1.0: USB hub found [ 0.333946] hub 2-0:1.0: 3 ports detected [ 0.334030] alloc irq_desc for 21 on node -1 [ 0.334033] alloc kstat_irqs on node -1 [ 0.334043] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.334053] ohci_hcd 0000:00:03.1: setting latency timer to 64 [ 0.334057] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.334119] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.334152] ohci_hcd 0000:00:03.1: irq 21, io mem 0x000da000 [ 0.360804] ata1.00: ATA-6: ST980815A, 3.ALD, max UDMA/100 [ 0.360810] ata1.00: 156301488 sectors, multi 16: LBA48 [ 0.376921] ata1.00: configured for UDMA/100 [ 0.426170] usb usb3: configuration #1 chosen from 1 choice [ 0.426213] hub 3-0:1.0: USB hub found [ 0.426232] hub 3-0:1.0: 3 ports detected [ 0.426311] uhci_hcd: USB Universal Host Controller Interface driver [ 0.426437] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.431588] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.442717] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.442737] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.442800] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.442835] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.442867] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.443077] mice: PS/2 mouse device common for all mice [ 0.443867] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.443897] rtc0: alarms up to one year, 114 bytes nvram [ 0.444062] device-mapper: uevent: version 1.0.3 [ 0.445835] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.447346] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.448544] device-mapper: multipath: version 1.1.0 loaded [ 0.448549] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.450209] EISA: Probing bus 0 at eisa.0 [ 0.450219] Cannot allocate resource for EISA slot 1 [ 0.450248] EISA: Detected 0 cards. [ 0.453084] cpuidle: using governor ladder [ 0.453089] cpuidle: using governor menu [ 0.453705] TCP cubic registered [ 0.453870] NET: Registered protocol family 10 [ 0.454495] lo: Disabled Privacy Extensions [ 0.454894] NET: Registered protocol family 17 [ 0.455191] Using IPI No-Shortcut mode [ 0.455334] PM: Resume from disk failed. [ 0.455352] registered taskstats version 1 [ 0.455614] Magic number: 6:206:954 [ 0.455720] rtc_cmos 00:01: setting system clock to 2010-08-29 20:54:48 UTC (1283115288) [ 0.455724] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.455727] EDD information not available. [ 0.703870] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 0.876088] isapnp: No Plug & Play device found [ 0.876334] scsi 0:0:0:0: Direct-Access ATA ST980815A 3.AL PQ: 0 ANSI: 5 [ 0.876581] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.876817] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.876881] sd 0:0:0:0: [sda] Write Protect is off [ 0.876885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.876915] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.877103] sda: sda1 sda2 < [ 0.902910] usb 1-5: configuration #1 chosen from 1 choice [ 0.916914] sda5 sda6 [ 0.947586] Freeing initrd memory: 12838k freed [ 0.971323] sda7 sda8 > [ 0.991603] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.040408] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW242B, UX51, max UDMA/33 [ 1.056421] ata2.00: configured for UDMA/33 [ 1.057145] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW242B UX51 PQ: 0 ANSI: 5 [ 1.059846] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray [ 1.059851] Uniform CD-ROM driver Revision: 3.20 [ 1.059977] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.060059] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.060126] Freeing unused kernel memory: 660k freed [ 1.061095] Write protecting the kernel text: 4680k [ 1.061126] Write protecting the kernel read-only data: 1844k [ 1.080219] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.091553] udev: starting version 151 [ 1.278200] usb 3-1: configuration #1 chosen from 1 choice [ 1.371268] vga16fb: initializing [ 1.371275] vga16fb: mapped to 0xc00a0000 [ 1.371358] fb0: VGA16 VGA frame buffer device [ 1.377457] Linux agpgart interface v0.103 [ 1.392667] sis900.c: v1.08.10 Apr. 2 2006 [ 1.392736] alloc irq_desc for 19 on node -1 [ 1.392739] alloc kstat_irqs on node -1 [ 1.392750] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.393924] 0000:00:04.0: ICS LAN PHY transceiver found at address 1. [ 1.406180] 0000:00:04.0: Using transceiver found at address 1 as default [ 1.461796] usbcore: registered new interface driver hiddev [ 1.462965] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:40:d0:51:3d:9a [ 1.463004] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650] [ 1.468578] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 1.469456] input: USB Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input5 [ 1.469610] generic-usb 0003:15D9:0A41.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.1-1/input0 [ 1.469649] usbcore: registered new interface driver usbhid [ 1.469653] usbhid: v2.6:USB HID core driver [ 1.526573] Console: switching to colour frame buffer device 80x30 [ 2.301146] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 4.091800] Adding 1393656k swap on /dev/sda8. Priority:-1 extents:1 across:1393656k [ 4.312563] udev: starting version 151 [ 5.088914] parport_pc 00:09: reported by Plug and Play ACPI [ 5.088966] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 5.425750] lp0: using parport0 (interrupt-driven). [ 5.471059] ppdev: user-space parallel port driver [ 5.829401] type=1505 audit(1283111693.872:2): operation="profile_load" pid=494 name="/sbin/dhclient3" [ 5.829953] type=1505 audit(1283111693.872:3): operation="profile_load" pid=494 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 5.830251] type=1505 audit(1283111693.872:4): operation="profile_load" pid=494 name="/usr/lib/connman/scripts/dhclient-script" [ 5.978127] cfg80211: Calling CRDA to update world regulatory domain [ 6.363844] yenta_cardbus 0000:00:09.0: CardBus bridge found [1071:8640] [ 6.363870] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI [ 6.363873] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI [ 6.363879] yenta_cardbus 0000:00:09.0: TI: mfunc 0x01021c72, devctl 0x64 [ 6.592660] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0c78, PCI irq 17 [ 6.592666] yenta_cardbus 0000:00:09.0: Socket status: 30000006 [ 6.593614] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1c00 [ 6.593959] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.628281] cfg80211: World regulatory domain updated: [ 6.628287] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.628291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.628294] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.628298] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.628301] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.628305] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.830201] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0 [ 6.870629] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 7.165536] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 7.167281] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 7.168117] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 7.168763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 7.169597] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.876430] phy0: Selected rate control algorithm 'minstrel' [ 7.877306] phy0: hwaddr 00:18:4d:bd:27:33, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 7.888496] rtl8187: Customer ID is 0xFF [ 7.889305] Registered led device: rtl8187-phy0::tx [ 7.891200] Registered led device: rtl8187-phy0::rx [ 7.891858] rtl8187: wireless switch is on [ 7.891975] usbcore: registered new interface driver rtl8187 [ 9.236768] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.481104] type=1505 audit(1283111697.524:5): operation="profile_load" pid=697 name="/usr/share/gdm/guest-session/Xsession" [ 9.484066] type=1505 audit(1283111697.524:6): operation="profile_replace" pid=704 name="/sbin/dhclient3" [ 9.485143] type=1505 audit(1283111697.528:7): operation="profile_replace" pid=704 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.485467] type=1505 audit(1283111697.528:8): operation="profile_replace" pid=704 name="/usr/lib/connman/scripts/dhclient-script" [ 9.709725] type=1505 audit(1283111697.752:9): operation="profile_load" pid=705 name="/usr/bin/evince" [ 9.717853] type=1505 audit(1283111697.760:10): operation="profile_load" pid=705 name="/usr/bin/evince-previewer" [ 9.722735] type=1505 audit(1283111697.764:11): operation="profile_load" pid=705 name="/usr/bin/evince-thumbnailer" [ 10.064032] intel8x0_measure_ac97_clock: measured 55221 usecs (2657 samples) [ 10.064038] intel8x0: clocking to 48000 [ 14.296913] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.303312] eth0: Media Link Off [ 14.305767] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.824696] padlock: VIA PadLock not detected. [ 74.544234] Marking TSC unstable due to cpufreq changes [ 74.544316] Switching to clocksource acpi_pm [ 285.792796] wlan0: deauthenticating from 00:1b:2f:74:b6:50 by local choice (reason=3) [ 285.848742] wlan0: direct probe to AP 00:1b:2f:74:b6:50 (try 1) [ 285.850985] wlan0: direct probe responded [ 285.850991] wlan0: authenticate with AP 00:1b:2f:74:b6:50 (try 1) [ 285.852451] wlan0: authenticated [ 285.852819] wlan0: associate with AP 00:1b:2f:74:b6:50 (try 1) [ 285.855114] wlan0: RX AssocResp from 00:1b:2f:74:b6:50 (capab=0x411 status=0 aid=1) [ 285.855123] wlan0: associated [ 285.858340] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 296.772022] wlan0: no IPv6 routers present [ 2841.790923] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2841.808385] SGI XFS Quota Management subsystem [ 2841.968205] JFS: nTxBlock = 3725, nTxLock = 29802 [ 2842.142993] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 2842.227398] QNX4 filesystem 0.2.3 registered. [ 2842.391885] Btrfs loaded [ 3121.460878] udev: starting version 151 [ 3251.763555] __ratelimit: 9 callbacks suppressed [ 3251.763563] type=1505 audit(1283114939.804:15): operation="profile_load" pid=26604 name="/usr/bin/freshclam"