[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-16-generic (buildd@vernadsky) (gcc version 4.4.5 20100813 (Linaro prerelease) [release 2010.08-0] (Ubuntu/Linaro 4.4.4-8ubuntu2) ) #22-Ubuntu SMP Tue Aug 17 02:19:50 UTC 2010 (Ubuntu 2.6.35-16.22-generic 2.6.35.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003be90000 (usable) [ 0.000000] BIOS-e820: 000000003be90000 - 000000003be9c000 (ACPI data) [ 0.000000] BIOS-e820: 000000003be9c000 - 000000003bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3be90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03BF00000 mask FFFF00000 uncachable [ 0.000000] 2 base 03C000000 mask FFC000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003be90000 (usable) [ 0.000000] modified: 000000003be90000 - 000000003be9c000 (ACPI data) [ 0.000000] modified: 000000003be9c000 - 000000003bf00000 (ACPI NVS) [ 0.000000] modified: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f81a0] f81a0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 2c4e8000 - 2cf2c000 [ 0.000000] ACPI: RSDP 000f8170 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3be977c0 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3be9bf3c 00074 (v01 VN800 PTLTW 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 3be97ec0 0407C (v01 VIA PTL_ACPI 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3be9cfc0 00040 [ 0.000000] ACPI: APIC 3be9bfb0 00050 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 3be97cd0 001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.000000] ACPI: SSDT 3be977f4 004DC (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 70MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003be90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0003be90 [ 0.000000] On node 0 totalpages: 245279 [ 0.000000] free_area_init_node: node 0, pgdat c07fb640, node_mem_map c1001020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 142 pages used for memmap [ 0.000000] HighMem zone: 17924 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: VIA [ 0.000000] MPTABLE: Product ID: VN800 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #1 Version 3 at 0xFEC00000. [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 1 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36352 r0 d20992 u4194304 [ 0.000000] pcpu-alloc: s36352 r0 d20992 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243361 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-16-generic root=UUID=698778a8-de26-486e-b861-866b114455b3 ro quiet noapic splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4907820 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (48 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 000099badc] TEXT DATA BSS [ 0.000000] #3 [002c4e8000 - 002cf2c000] RAMDISK [ 0.000000] #4 [000099c000 - 000099f110] BRK [ 0.000000] #5 [00000f81b0 - 0000100000] BIOS reserved [ 0.000000] #6 [00000f81a0 - 00000f81b0] MP-table mpf [ 0.000000] #7 [000009e000 - 000009e571] BIOS reserved [ 0.000000] #8 [000009e659 - 00000f81a0] BIOS reserved [ 0.000000] #9 [000009e571 - 000009e659] MP-table mpc [ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #12 [0000015000 - 0000016000] PGTABLE [ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM [ 0.000000] #14 [0001001000 - 0001781000] BOOTMEM [ 0.000000] #15 [0001781000 - 0001781004] BOOTMEM [ 0.000000] #16 [0001781040 - 0001781100] BOOTMEM [ 0.000000] #17 [0001781100 - 0001781154] BOOTMEM [ 0.000000] #18 [0001781180 - 0001784180] BOOTMEM [ 0.000000] #19 [0001784180 - 0001784188] BOOTMEM [ 0.000000] #20 [00017841c0 - 00017847c0] BOOTMEM [ 0.000000] #21 [00017847c0 - 00017847e7] BOOTMEM [ 0.000000] #22 [0001784800 - 000178496c] BOOTMEM [ 0.000000] #23 [0001784980 - 00017849c0] BOOTMEM [ 0.000000] #24 [00017849c0 - 0001784a00] BOOTMEM [ 0.000000] #25 [0001784a00 - 0001784a40] BOOTMEM [ 0.000000] #26 [0001784a40 - 0001784a80] BOOTMEM [ 0.000000] #27 [0001784a80 - 0001784ac0] BOOTMEM [ 0.000000] #28 [0001784ac0 - 0001784b00] BOOTMEM [ 0.000000] #29 [0001784b00 - 0001784b40] BOOTMEM [ 0.000000] #30 [0001784b40 - 0001784b80] BOOTMEM [ 0.000000] #31 [0001784b80 - 0001784bc0] BOOTMEM [ 0.000000] #32 [0001784bc0 - 0001784c00] BOOTMEM [ 0.000000] #33 [0001784c00 - 0001784c10] BOOTMEM [ 0.000000] #34 [0001784c40 - 0001784c50] BOOTMEM [ 0.000000] #35 [0001784c80 - 0001784cf1] BOOTMEM [ 0.000000] #36 [0001784d00 - 0001784d71] BOOTMEM [ 0.000000] #37 [0001800000 - 000180e000] BOOTMEM [ 0.000000] #38 [0001786d80 - 0001786d84] BOOTMEM [ 0.000000] #39 [0001786dc0 - 0001786dc4] BOOTMEM [ 0.000000] #40 [0001786e00 - 0001786e04] BOOTMEM [ 0.000000] #41 [0001786e40 - 0001786e44] BOOTMEM [ 0.000000] #42 [0001786e80 - 0001786f30] BOOTMEM [ 0.000000] #43 [0001786f40 - 0001786fe8] BOOTMEM [ 0.000000] #44 [0001787000 - 000178b000] BOOTMEM [ 0.000000] #45 [000180e000 - 000188e000] BOOTMEM [ 0.000000] #46 [000178b000 - 00017cb000] BOOTMEM [ 0.000000] #47 [000188e000 - 0001d3c32c] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0003be90) [ 0.000000] Memory: 948404k/981568k available (4918k kernel code, 32712k reserved, 2329k data, 684k init, 72264k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0814000 - 0xc08bf000 ( 684 kB) [ 0.000000] .data : 0xc05cd82e - 0xc0813f68 (2329 kB) [ 0.000000] .text : 0xc0100000 - 0xc05cd82e (4918 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.062 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.12 BogoMIPS (lpj=6384248) [ 0.004013] pid_max: default: 32768 minimum: 301 [ 0.004043] Security Framework initialized [ 0.004072] AppArmor: AppArmor initialized [ 0.004075] Yama: becoming mindful. [ 0.004153] Mount-cache hash table entries: 512 [ 0.008132] Initializing cgroup subsys ns [ 0.008140] Initializing cgroup subsys cpuacct [ 0.008146] Initializing cgroup subsys memory [ 0.008159] Initializing cgroup subsys devices [ 0.008163] Initializing cgroup subsys freezer [ 0.008166] Initializing cgroup subsys net_cls [ 0.008205] mce: CPU supports 6 MCE banks [ 0.008215] Disabling lock debugging due to kernel taint [ 0.008227] CPU0: Thermal monitoring enabled (TM1) [ 0.008233] using mwait in idle threads. [ 0.008242] Performance Events: Core events, core PMU driver. [ 0.008256] ... version: 1 [ 0.008259] ... bit width: 40 [ 0.008261] ... generic registers: 2 [ 0.008264] ... value mask: 000000ffffffffff [ 0.008267] ... max period: 000000007fffffff [ 0.008270] ... fixed-purpose events: 0 [ 0.008272] ... event mask: 0000000000000003 [ 0.009623] SMP alternatives: switching to UP code [ 0.018973] Freeing SMP alternatives: 24k freed [ 0.018992] ACPI: Core revision 20100428 [ 0.026148] ACPI: setting ELCR to 0400 (from 0680) [ 0.027715] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.027721] ftrace: allocating 21706 entries in 43 pages [ 0.032090] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032102] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 [ 0.036000] APIC calibration not consistent with PM-Timer: 184ms instead of 100ms [ 0.036000] APIC delta adjusted to PM-Timer: 831248 (1529587) [ 0.036000] Brought up 1 CPUs [ 0.036000] Total of 1 processors activated (3192.12 BogoMIPS). [ 0.036000] devtmpfs: initialized [ 0.036000] regulator: core version 0.5 [ 0.036000] Time: 22:36:49 Date: 08/19/10 [ 0.036000] NET: Registered protocol family 16 [ 0.036000] EISA bus registered [ 0.036000] ACPI: bus type pci registered [ 0.036000] PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1 [ 0.036000] PCI: Using configuration type 1 for base access [ 0.036000] bio: create slab at 0 [ 0.036848] ACPI: EC: Look up EC in DSDT [ 0.042460] ACPI: Interpreter enabled [ 0.042465] ACPI: (supports S0 S3 S4 S5) [ 0.042488] ACPI: Using PIC for interrupt routing [ 0.060250] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 [ 0.060633] ACPI: No dock devices found. [ 0.060639] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.060755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.060965] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.060969] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.060973] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfff7ffff] (ignored) [ 0.061004] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.061354] pci 0000:00:01.0: supports D1 [ 0.061405] pci 0000:00:0e.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.061427] pci 0000:00:0e.0: supports D1 D2 [ 0.061431] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.061437] pci 0000:00:0e.0: PME# disabled [ 0.061471] pci 0000:00:0e.1: reg 10: [mem 0x00000000-0x0000007f] [ 0.061524] pci 0000:00:0e.1: supports D1 D2 [ 0.061528] pci 0000:00:0e.1: PME# supported from D0 D1 D2 D3hot [ 0.061534] pci 0000:00:0e.1: PME# disabled [ 0.061567] pci 0000:00:0e.2: reg 10: [mem 0x00000000-0x000000ff] [ 0.061621] pci 0000:00:0e.2: supports D1 D2 [ 0.061624] pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot [ 0.061630] pci 0000:00:0e.2: PME# disabled [ 0.061665] pci 0000:00:0e.4: reg 10: [mem 0x00000000-0x000000ff] [ 0.061718] pci 0000:00:0e.4: supports D1 D2 [ 0.061721] pci 0000:00:0e.4: PME# supported from D0 D1 D2 D3hot [ 0.061728] pci 0000:00:0e.4: PME# disabled [ 0.061765] pci 0000:00:0f.0: reg 10: [io 0x1430-0x1437] [ 0.061774] pci 0000:00:0f.0: reg 14: [io 0x1424-0x1427] [ 0.061782] pci 0000:00:0f.0: reg 18: [io 0x1428-0x142f] [ 0.061791] pci 0000:00:0f.0: reg 1c: [io 0x1420-0x1423] [ 0.061799] pci 0000:00:0f.0: reg 20: [io 0x1400-0x140f] [ 0.061807] pci 0000:00:0f.0: reg 24: [io 0x1000-0x10ff] [ 0.061888] pci 0000:00:0f.1: reg 20: [io 0x1410-0x141f] [ 0.061981] pci 0000:00:10.0: reg 20: [io 0x1440-0x145f] [ 0.062012] pci 0000:00:10.0: supports D1 D2 [ 0.062016] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062022] pci 0000:00:10.0: PME# disabled [ 0.062074] pci 0000:00:10.1: reg 20: [io 0x1460-0x147f] [ 0.062105] pci 0000:00:10.1: supports D1 D2 [ 0.062109] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062115] pci 0000:00:10.1: PME# disabled [ 0.062167] pci 0000:00:10.2: reg 20: [io 0x1480-0x149f] [ 0.062198] pci 0000:00:10.2: supports D1 D2 [ 0.062201] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062208] pci 0000:00:10.2: PME# disabled [ 0.062260] pci 0000:00:10.3: reg 20: [io 0x14a0-0x14bf] [ 0.062291] pci 0000:00:10.3: supports D1 D2 [ 0.062294] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062300] pci 0000:00:10.3: PME# disabled [ 0.062333] pci 0000:00:10.4: reg 10: [mem 0xf5200000-0xf52000ff] [ 0.062384] pci 0000:00:10.4: supports D1 D2 [ 0.062387] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062394] pci 0000:00:10.4: PME# disabled [ 0.062464] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.062523] pci 0000:00:11.5: reg 10: [io 0x1800-0x18ff] [ 0.062576] pci 0000:00:11.5: supports D1 D2 [ 0.062611] pci 0000:00:11.6: reg 10: [io 0x1c00-0x1cff] [ 0.062697] pci 0000:00:12.0: reg 10: [io 0x2000-0x20ff] [ 0.062706] pci 0000:00:12.0: reg 14: [mem 0xf5200400-0xf52004ff] [ 0.062753] pci 0000:00:12.0: supports D1 D2 [ 0.062756] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.062762] pci 0000:00:12.0: PME# disabled [ 0.062841] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref] [ 0.062848] pci 0000:01:00.0: reg 14: [mem 0xf4000000-0xf4ffffff] [ 0.062871] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.062892] pci 0000:01:00.0: supports D1 D2 [ 0.062934] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.062941] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.062947] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf4ffffff] [ 0.062953] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.063002] pci_bus 0000:00: on NUMA node 0 [ 0.063007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.078423] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [ 0.078544] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. [ 0.078661] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *7, disabled. [ 0.078773] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. [ 0.078928] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *9 10 11 12) [ 0.079081] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 9 *10 11 12) [ 0.079228] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *7 [ 0.079357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled. [ 0.079485] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled. [ 0.079612] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled. [ 0.079739] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled. [ 0.079866] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *0, disabled. [ 0.079923] HEST: Table is not found! [ 0.080042] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.080046] vgaarb: loaded [ 0.080258] SCSI subsystem initialized [ 0.080328] libata version 3.00 loaded. [ 0.080407] usbcore: registered new interface driver usbfs [ 0.080423] usbcore: registered new interface driver hub [ 0.080459] usbcore: registered new device driver usb [ 0.080706] ACPI: WMI: Mapper loaded [ 0.080709] PCI: Using ACPI for IRQ routing [ 0.080714] PCI: pci_cache_line_size set to 64 bytes [ 0.080811] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.080815] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.080818] reserve RAM buffer: 000000003be90000 - 000000003bffffff [ 0.080948] NetLabel: Initializing [ 0.080951] NetLabel: domain hash size = 128 [ 0.080953] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.080971] NetLabel: unlabeled traffic allowed by default [ 0.081025] Switching to clocksource tsc [ 0.094697] AppArmor: AppArmor Filesystem Enabled [ 0.094731] pnp: PnP ACPI init [ 0.094765] ACPI: bus type pnp registered [ 0.097354] pnp: PnP ACPI: found 9 devices [ 0.097358] ACPI: ACPI bus type pnp unregistered [ 0.097363] PnPBIOS: Disabled by ACPI PNP [ 0.097385] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.097390] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.097394] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.097398] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved [ 0.097406] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.097410] system 00:06: [io 0x0278-0x027b] has been reserved [ 0.097413] system 00:06: [io 0x0678-0x067b] has been reserved [ 0.097417] system 00:06: [io 0xfe10-0xfe11] has been reserved [ 0.097421] system 00:06: [io 0xfe00] has been reserved [ 0.097425] system 00:06: [io 0x4000-0x407f] has been reserved [ 0.097428] system 00:06: [io 0x4100-0x411f] has been reserved [ 0.132207] pci 0000:00:0e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref] [ 0.132212] pci 0000:00:0e.0: BAR 16: assigned [mem 0x44000000-0x47ffffff] [ 0.132216] pci 0000:00:0e.0: BAR 0: assigned [mem 0x48000000-0x48000fff] [ 0.132225] pci 0000:00:0e.0: BAR 0: set to [mem 0x48000000-0x48000fff] (PCI address [0x48000000-0x48000fff] [ 0.132230] pci 0000:00:0e.0: BAR 13: assigned [io 0x2400-0x24ff] [ 0.132234] pci 0000:00:0e.0: BAR 14: assigned [io 0x2800-0x28ff] [ 0.132238] pci 0000:00:0e.2: BAR 0: assigned [mem 0x48001000-0x480010ff] [ 0.132245] pci 0000:00:0e.2: BAR 0: set to [mem 0x48001000-0x480010ff] (PCI address [0x48001000-0x480010ff] [ 0.132250] pci 0000:00:0e.4: BAR 0: assigned [mem 0x48001100-0x480011ff] [ 0.132257] pci 0000:00:0e.4: BAR 0: set to [mem 0x48001100-0x480011ff] (PCI address [0x48001100-0x480011ff] [ 0.132261] pci 0000:00:0e.1: BAR 0: assigned [mem 0x48001200-0x4800127f] [ 0.132268] pci 0000:00:0e.1: BAR 0: set to [mem 0x48001200-0x4800127f] (PCI address [0x48001200-0x4800127f] [ 0.132274] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000) [ 0.132277] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.132280] pci 0000:00:01.0: bridge window [io disabled] [ 0.132287] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf4ffffff] [ 0.132293] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.132301] pci 0000:00:0e.0: CardBus bridge to [bus 02-05] [ 0.132304] pci 0000:00:0e.0: bridge window [io 0x2400-0x24ff] [ 0.132310] pci 0000:00:0e.0: bridge window [io 0x2800-0x28ff] [ 0.132316] pci 0000:00:0e.0: bridge window [mem 0x40000000-0x43ffffff pref] [ 0.132322] pci 0000:00:0e.0: bridge window [mem 0x44000000-0x47ffffff] [ 0.132343] pci 0000:00:01.0: setting latency timer to 64 [ 0.132353] pci 0000:00:0e.0: enabling device (0000 -> 0003) [ 0.132606] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 0.132610] PCI: setting IRQ 9 as level-triggered [ 0.132618] pci 0000:00:0e.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 0.132626] pci 0000:00:0e.0: setting latency timer to 64 [ 0.132632] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.132636] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.132640] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf4ffffff] [ 0.132643] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.132647] pci_bus 0000:02: resource 0 [io 0x2400-0x24ff] [ 0.132650] pci_bus 0000:02: resource 1 [io 0x2800-0x28ff] [ 0.132654] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref] [ 0.132658] pci_bus 0000:02: resource 3 [mem 0x44000000-0x47ffffff] [ 0.132716] NET: Registered protocol family 2 [ 0.132806] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.133137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.134484] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.135385] TCP: Hash tables configured (established 131072 bind 65536) [ 0.135391] TCP reno registered [ 0.135401] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.135433] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.135618] NET: Registered protocol family 1 [ 0.135659] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.135775] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.135794] pci 0000:01:00.0: Boot video device [ 0.135798] PCI: CLS 32 bytes, default 64 [ 0.136109] cpufreq-nforce2: No nForce2 chipset. [ 0.136142] Scanning for low memory corruption every 60 seconds [ 0.136373] audit: initializing netlink socket (disabled) [ 0.136391] type=2000 audit(1282257409.132:1): initialized [ 0.150730] Trying to unpack rootfs image as initramfs... [ 0.167379] highmem bounce pool size: 64 pages [ 0.167389] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.173333] VFS: Disk quotas dquot_6.5.2 [ 0.173422] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.179249] fuse init (API version 7.14) [ 0.179410] msgmni has been set to 1711 [ 0.187617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.187623] io scheduler noop registered [ 0.187626] io scheduler deadline registered [ 0.187652] io scheduler cfq registered (default) [ 0.187849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.187877] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.188075] vesafb: framebuffer at 0xf012c000, mapped to 0xf8080000, using 1216k, total 1216k [ 0.188079] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.188082] vesafb: scrolling: redraw [ 0.188086] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.202267] Console: switching to colour frame buffer device 80x30 [ 0.216275] fb0: VESA VGA frame buffer device [ 0.247107] ACPI: AC Adapter [AC] (on-line) [ 0.247233] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.247239] ACPI: Power Button [PWB] [ 0.247302] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.247311] ACPI: Sleep Button [SLPB] [ 0.247366] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.248086] ACPI: Lid Switch [LID] [ 0.248152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.248156] ACPI: Power Button [PWRF] [ 0.248409] ACPI: acpi_idle registered with cpuidle [ 0.248569] Marking TSC unstable due to TSC halts in idle [ 0.254680] Switching to clocksource acpi_pm [ 0.280172] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.280190] ACPI: Thermal Zone [THRM] (55 C) [ 0.280339] ERST: Table is not found! [ 0.282109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.283902] brd: module loaded [ 0.289054] loop: module loaded [ 0.289432] pata_acpi 0000:00:0f.0: PCI INT B -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 0.289439] pata_acpi 0000:00:0f.0: VIA VLink IRQ fixup, from 10 to 9 [ 0.289521] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.289620] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0 [ 0.289659] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0 [ 0.289667] pata_acpi 0000:00:0f.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 0.289672] pata_acpi 0000:00:0f.1: VIA VLink IRQ fixup, from 0 to 9 [ 0.289717] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.290108] Fixed MDIO Bus: probed [ 0.290156] PPP generic driver version 2.4.2 [ 0.290212] tun: Universal TUN/TAP device driver, 1.6 [ 0.290215] tun: (C) 1999-2004 Max Krasnyansky [ 0.290314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.290615] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.290619] PCI: setting IRQ 11 as level-triggered [ 0.290627] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.290632] ehci_hcd 0000:00:10.4: VIA VLink IRQ fixup, from 7 to 11 [ 0.290671] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.290722] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.290775] ehci_hcd 0000:00:10.4: irq 11, io mem 0xf5200000 [ 0.290931] isapnp: Scanning for PnP cards... [ 0.300210] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.300420] hub 1-0:1.0: USB hub found [ 0.300428] hub 1-0:1.0: 8 ports detected [ 0.300522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.300547] uhci_hcd: USB Universal Host Controller Interface driver [ 0.300615] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 0.300629] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.300676] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.300709] uhci_hcd 0000:00:10.0: irq 9, io base 0x00001440 [ 0.300849] hub 2-0:1.0: USB hub found [ 0.300861] hub 2-0:1.0: 2 ports detected [ 0.300931] uhci_hcd 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 0.300941] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.300981] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.301004] uhci_hcd 0000:00:10.1: irq 9, io base 0x00001460 [ 0.301144] hub 3-0:1.0: USB hub found [ 0.301149] hub 3-0:1.0: 2 ports detected [ 0.301507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.301511] PCI: setting IRQ 10 as level-triggered [ 0.301517] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.301527] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.301572] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.301598] uhci_hcd 0000:00:10.2: irq 10, io base 0x00001480 [ 0.301754] hub 4-0:1.0: USB hub found [ 0.301760] hub 4-0:1.0: 2 ports detected [ 0.301824] uhci_hcd 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.301833] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.301877] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.301900] uhci_hcd 0000:00:10.3: irq 10, io base 0x000014a0 [ 0.302045] hub 5-0:1.0: USB hub found [ 0.302051] hub 5-0:1.0: 2 ports detected [ 0.302189] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.308641] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.365586] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.365599] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.365660] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.365712] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.365746] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.365951] mice: PS/2 mouse device common for all mice [ 0.366188] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.366225] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.366421] device-mapper: uevent: version 1.0.3 [ 0.366592] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.369716] device-mapper: multipath: version 1.1.1 loaded [ 0.369748] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.376665] EISA: Probing bus 0 at eisa.0 [ 0.376677] Cannot allocate resource for EISA slot 1 [ 0.376682] Cannot allocate resource for EISA slot 2 [ 0.376689] Cannot allocate resource for EISA slot 4 [ 0.376708] EISA: Detected 0 cards. [ 0.376856] cpuidle: using governor ladder [ 0.376924] cpuidle: using governor menu [ 0.377314] TCP cubic registered [ 0.377493] NET: Registered protocol family 10 [ 0.377952] lo: Disabled Privacy Extensions [ 0.378224] NET: Registered protocol family 17 [ 0.378297] Using IPI No-Shortcut mode [ 0.378441] PM: Resume from disk failed. [ 0.378458] registered taskstats version 1 [ 0.378756] Magic number: 6:356:654 [ 0.378916] rtc_cmos 00:02: setting system clock to 2010-08-19 22:36:50 UTC (1282257410) [ 0.378921] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.378923] EDD information not available. [ 0.397438] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.648428] ACPI: Battery Slot [BAT0] (battery present) [ 0.719782] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.895807] isapnp: No Plug & Play device found [ 0.916389] Freeing initrd memory: 10512k freed [ 0.929626] Freeing unused kernel memory: 684k freed [ 0.930501] Write protecting the kernel text: 4920k [ 0.930548] Write protecting the kernel read-only data: 1972k [ 0.956233] udev: starting version 151 [ 1.156100] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 1.182156] sdhci: Secure Digital Host Controller Interface driver [ 1.182161] sdhci: Copyright(c) Pierre Ossman [ 1.223900] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.223961] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 1.275112] eth0: VIA Rhine II at 0xf5200400, 00:90:f5:56:02:d7, IRQ 9. [ 1.275829] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 1.275858] pata_via 0000:00:0f.1: version 0.3.4 [ 1.275950] pata_via 0000:00:0f.1: power state changed by ACPI to D0 [ 1.275990] pata_via 0000:00:0f.1: power state changed by ACPI to D0 [ 1.276071] pata_via 0000:00:0f.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 1.276858] scsi0 : pata_via [ 1.277081] scsi1 : pata_via [ 1.278118] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1410 irq 14 [ 1.278122] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1418 irq 15 [ 1.278253] sata_via 0000:00:0f.0: version 2.6 [ 1.278266] sata_via 0000:00:0f.0: PCI INT B -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 1.278306] sata_via 0000:00:0f.0: routed to hard irq line 9 [ 1.278612] scsi2 : sata_via [ 1.278744] scsi3 : sata_via [ 1.278795] ata3: SATA max UDMA/133 cmd 0x1430 ctl 0x1424 bmdma 0x1400 irq 9 [ 1.278799] ata4: SATA max UDMA/133 cmd 0x1428 ctl 0x1420 bmdma 0x1408 irq 9 [ 1.278930] sdhci-pci 0000:00:0e.2: SDHCI controller found [1524:0550] (rev 1) [ 1.278944] sdhci-pci 0000:00:0e.2: enabling device (0000 -> 0002) [ 1.278953] sdhci-pci 0000:00:0e.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 1.279025] Registered led device: mmc0:: [ 1.279069] mmc0: SDHCI controller on PCI [0000:00:0e.2] using PIO [ 1.279081] sdhci-pci 0000:00:0e.4: SDHCI controller found [1524:0551] (rev 1) [ 1.279094] sdhci-pci 0000:00:0e.4: enabling device (0000 -> 0002) [ 1.279101] sdhci-pci 0000:00:0e.4: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 1.279148] Registered led device: mmc1:: [ 1.279176] mmc1: SDHCI controller on PCI [0000:00:0e.4] using PIO [ 1.440422] ata1.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AX04, max UDMA/33 [ 1.456306] ata1.00: configured for UDMA/33 [ 1.458287] scsi 0:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AX04 PQ: 0 ANSI: 5 [ 1.472264] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.472269] Uniform CD-ROM driver Revision: 3.20 [ 1.472590] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.472760] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.480046] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.544043] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.636554] ata2.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100 [ 1.636559] ata2.00: 195371568 sectors, multi 16: LBA48 [ 1.636591] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.644428] ata2.00: configured for UDMA/33 [ 1.644554] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5 [ 1.644721] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.645012] sd 1:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) [ 1.645087] sd 1:0:0:0: [sda] Write Protect is off [ 1.645091] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.645124] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.645316] sda: sda1 sda2 sda3 [ 1.676148] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.848044] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.872345] usbcore: registered new interface driver hiddev [ 1.887243] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input5 [ 1.887465] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-2/input0 [ 1.887627] usbcore: registered new interface driver usbhid [ 1.887631] usbhid: USB HID core driver [ 1.968048] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.155124] input: USB Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.0/input/input6 [ 2.155681] generic-usb 0003:05E3:1205.0002: input,hidraw1: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:10.2-2/input0 [ 2.287140] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 19.162202] Adding 2731012k swap on /dev/sda1. Priority:-1 extents:1 across:2731012k [ 19.233595] udev: starting version 151 [ 19.465839] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.683723] Linux agpgart interface v0.103 [ 19.687421] agpgart: Detected VIA VT3314 chipset [ 20.017463] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input7 [ 20.017607] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 20.045444] lp: driver loaded but no devices found [ 20.061084] Linux video capture interface: v2.00 [ 20.082714] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 20.082771] yenta_cardbus 0000:00:0e.0: CardBus bridge found [1558:0662] [ 20.082792] yenta_cardbus 0000:00:0e.0: Enabling burst memory read transactions [ 20.082798] yenta_cardbus 0000:00:0e.0: Using CSCINT to route CSC interrupts to PCI [ 20.082801] yenta_cardbus 0000:00:0e.0: Routing CardBus interrupts to PCI [ 20.082808] yenta_cardbus 0000:00:0e.0: TI: mfunc 0x00001202, devctl 0x44 [ 20.146460] cfg80211: Calling CRDA to update world regulatory domain [ 20.191563] cfg80211: World regulatory domain updated: [ 20.191568] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.191572] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.191576] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.191580] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.191584] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.191587] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.192118] type=1400 audit(1282257430.310:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=609 comm="apparmor_parser" [ 20.192949] type=1400 audit(1282257430.310:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser" [ 20.193409] type=1400 audit(1282257430.310:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser" [ 20.201203] type=1400 audit(1282257430.318:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=618 comm="apparmor_parser" [ 20.312607] yenta_cardbus 0000:00:0e.0: ISA IRQ mask 0x0070, PCI irq 9 [ 20.312614] yenta_cardbus 0000:00:0e.0: Socket status: 30000006 [ 20.317643] coretemp coretemp.0: Unable to read TjMax from CPU. [ 20.317648] coretemp coretemp.0: TjMax is assumed as 100 C! [ 20.353397] gspca: main v2.9.0 registered [ 20.360456] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.364558] gspca: probing 0402:5602 [ 20.364564] ALi m5602: Probing for a po1030 sensor [ 20.377427] ALi m5602: Probing for a mt9m111 sensor [ 20.406434] ALi m5602: Probing for a s5k4aa sensor [ 20.448815] ALi m5602: Probing for an ov9650 sensor [ 20.471518] nf_conntrack version 0.5.0 (14994 buckets, 59976 max) [ 20.473734] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.473740] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.473743] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 20.474336] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x278-0x27f 0x370-0x377 [ 20.476358] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 20.477202] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 20.481791] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 20.482630] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 20.482698] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 20.483028] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 20.483101] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 20.483319] ALi m5602: Detected an ov9650 sensor [ 20.483885] clean. [ 20.557959] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0 [ 20.585416] gspca: video0 created [ 20.585454] usbcore: registered new interface driver ALi m5602 [ 20.585457] ALi m5602: registered [ 20.595701] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 21.078698] phy0: Selected rate control algorithm 'minstrel' [ 21.079581] phy0: hwaddr 00:15:af:0e:5d:6c, RTL8187vB (default) V1 + rtl8225, rfkill mask 2 [ 21.093432] rtl8187: Customer ID is 0x00 [ 21.094387] Registered led device: rtl8187-phy0::radio [ 21.095251] Registered led device: rtl8187-phy0::tx [ 21.096306] Registered led device: rtl8187-phy0::rx [ 21.096797] rtl8187: wireless switch is off [ 21.097878] usbcore: registered new interface driver rtl8187 [ 21.379528] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 21.379592] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 21.379606] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 21.379613] VIA 82xx Audio 0000:00:11.5: VIA VLink IRQ fixup, from 7 to 11 [ 21.379775] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 21.391860] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.899780] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 21.899843] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 21.899851] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 21.899863] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 21.899871] VIA 82xx Modem 0000:00:11.6: VIA VLink IRQ fixup, from 255 to 11 [ 21.904070] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 31.158857] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 31.269214] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 32.150066] type=1400 audit(1282257442.266:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=947 comm="apparmor_parser" [ 32.166529] type=1400 audit(1282257442.282:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=949 comm="apparmor_parser" [ 32.167358] type=1400 audit(1282257442.282:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=949 comm="apparmor_parser" [ 32.167816] type=1400 audit(1282257442.282:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=949 comm="apparmor_parser" [ 32.191024] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 32.220340] type=1400 audit(1282257442.338:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=950 comm="apparmor_parser" [ 32.290722] type=1400 audit(1282257442.406:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=950 comm="apparmor_parser" [ 32.325417] type=1400 audit(1282257442.442:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=950 comm="apparmor_parser" [ 32.345385] type=1400 audit(1282257442.462:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1026 comm="apparmor_parser" [ 32.346403] type=1400 audit(1282257442.462:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1026 comm="apparmor_parser" [ 32.349898] type=1400 audit(1282257442.466:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1027 comm="apparmor_parser"