[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=76a084b1-ca3c-4734-a789-b41e7c800400 ro quiet single acpi_no_auto_ssdt [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=76a084b1-ca3c-4734-a789-b41e7c800400 ro quiet single acpi_no_auto_ssdt [ 0.000000] ACPI: SSDT auto-load disabled [ 0.000000] Detected 2394.362 MHz processor. [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.72 BogoMIPS (lpj=23943620) [ 0.010035] Security Framework initialized [ 0.011377] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.011903] Mount-cache hash table entries: 256 [ 0.012043] Initializing cgroup subsys ns [ 0.012048] Initializing cgroup subsys cpuacct [ 0.012051] Initializing cgroup subsys memory [ 0.012059] Initializing cgroup subsys devices [ 0.012061] Initializing cgroup subsys freezer [ 0.012063] Initializing cgroup subsys net_cls [ 0.012083] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012085] CPU: L2 cache: 3072K [ 0.012088] CPU 0/0x0 -> Node 0 [ 0.012090] CPU: Physical Processor ID: 0 [ 0.012091] CPU: Processor Core ID: 0 [ 0.012094] mce: CPU supports 6 MCE banks [ 0.012102] CPU0: Thermal monitoring enabled (TM2) [ 0.012106] using mwait in idle threads. [ 0.012108] Performance Events: Core2 events, Intel PMU driver. [ 0.012113] ... version: 2 [ 0.012114] ... bit width: 40 [ 0.012115] ... generic registers: 2 [ 0.012117] ... value mask: 000000ffffffffff [ 0.012118] ... max period: 000000007fffffff [ 0.012119] ... fixed-purpose events: 3 [ 0.012121] ... event mask: 0000000700000003 [ 0.014414] ACPI: Core revision 20090903 [ 0.023981] ACPI: SSDT ignored due to "acpi_no_auto_ssdt" [ 0.024033] ACPI: SSDT ignored due to "acpi_no_auto_ssdt" [ 0.024048] ACPI: SSDT ignored due to "acpi_no_auto_ssdt" [ 0.024155] ACPI: SSDT ignored due to "acpi_no_auto_ssdt" [ 0.026194] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.026198] ftrace: allocating 22527 entries in 89 pages [ 0.030058] Setting APIC routing to flat [ 0.030406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.134965] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.290058] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.290066] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300017] Brought up 2 CPUs [ 0.300019] Total of 2 processors activated (9576.74 BogoMIPS). [ 0.300582] CPU0 attaching sched-domain: [ 0.300586] domain 0: span 0-1 level MC [ 0.300588] groups: 0 1 [ 0.300594] CPU1 attaching sched-domain: [ 0.300595] domain 0: span 0-1 level MC [ 0.300597] groups: 1 0 [ 0.300688] devtmpfs: initialized [ 0.300688] regulator: core version 0.5 [ 0.300688] Time: 18:36:43 Date: 08/13/10 [ 0.300688] NET: Registered protocol family 16 [ 0.300688] Trying to unpack rootfs image as initramfs... [ 0.300688] ACPI: bus type pci registered [ 0.300688] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.300688] PCI: MCFG area at e0000000 reserved in E820 [ 0.305247] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.305249] PCI: Using configuration type 1 for base access [ 0.310787] ACPI: EC: Look up EC in DSDT [ 0.312699] ACPI: BIOS _OSI(Linux) query ignored [ 0.390070] ACPI: Interpreter enabled [ 0.390077] ACPI: (supports S0 S3 S4 S5) [ 0.390102] ACPI: Using IOAPIC for interrupt routing [ 0.434336] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.434635] ACPI: No dock devices found. [ 0.435160] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.435269] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.435272] pci 0000:00:01.0: PME# disabled [ 0.435360] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.435425] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.435497] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0504800-0xf0504bff] [ 0.435559] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.435564] pci 0000:00:1a.7: PME# disabled [ 0.435619] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff] [ 0.435680] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.435684] pci 0000:00:1b.0: PME# disabled [ 0.435775] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.435780] pci 0000:00:1c.0: PME# disabled [ 0.435876] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.435881] pci 0000:00:1c.1: PME# disabled [ 0.435976] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.435980] pci 0000:00:1c.2: PME# disabled [ 0.436078] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.436083] pci 0000:00:1c.3: PME# disabled [ 0.436150] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 0.436214] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 0.436279] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 0.436350] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504c00-0xf0504fff] [ 0.436412] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.436417] pci 0000:00:1d.7: PME# disabled [ 0.436592] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.436596] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.436600] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007) [ 0.436604] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0260 (mask 0007) [ 0.436661] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.436668] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.436676] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.436683] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.436691] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 0.436765] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 0.436773] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 0.436780] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 0.436788] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 0.436795] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.436803] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504000-0xf05047ff] [ 0.436845] pci 0000:00:1f.2: PME# supported from D3hot [ 0.436849] pci 0000:00:1f.2: PME# disabled [ 0.436883] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.436908] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.436977] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.436990] pci 0000:01:00.0: reg 18 64bit mmio: [0xcfef0000-0xcfefffff] [ 0.436997] pci 0000:01:00.0: reg 20 io port: [0x2000-0x20ff] [ 0.437010] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.437038] pci 0000:01:00.0: supports D1 D2 [ 0.437101] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.437103] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff] [ 0.437107] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.437166] pci 0000:00:1c.0: bridge io port: [0xf000-0xffff] [ 0.437170] pci 0000:00:1c.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.437239] pci 0000:04:00.0: reg 10 32bit mmio: [0xf0300000-0xf03003ff] [ 0.437258] pci 0000:04:00.0: reg 18 io port: [0x3000-0x307f] [ 0.437293] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.437410] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.437415] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff] [ 0.437565] pci 0000:05:00.0: reg 10 32bit mmio: [0xf0200000-0xf0200fff] [ 0.437807] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.437819] pci 0000:05:00.0: PME# disabled [ 0.437936] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0200000-0xf02fffff] [ 0.438017] pci 0000:06:00.0: reg 10 io port: [0x4000-0x40ff] [ 0.438047] pci 0000:06:00.0: reg 18 64bit mmio: [0xf0400000-0xf0400fff] [ 0.438076] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.438139] pci 0000:06:00.0: supports D1 D2 [ 0.438140] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.438146] pci 0000:06:00.0: PME# disabled [ 0.438224] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] [ 0.438228] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.438302] pci 0000:00:1e.0: transparent bridge [ 0.438350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.438522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.438588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.438652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.438713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.438774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.438864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.447503] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.447592] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.447678] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.447763] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.447848] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.447935] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.448019] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.448108] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.448216] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.448220] vgaarb: loaded [ 0.448327] SCSI subsystem initialized [ 0.448422] libata version 3.00 loaded. [ 0.448487] usbcore: registered new interface driver usbfs [ 0.448497] usbcore: registered new interface driver hub [ 0.448520] usbcore: registered new device driver usb [ 0.448653] ACPI: WMI: Mapper loaded [ 0.448655] PCI: Using ACPI for IRQ routing [ 0.448847] NetLabel: Initializing [ 0.448849] NetLabel: domain hash size = 128 [ 0.448850] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.448865] NetLabel: unlabeled traffic allowed by default [ 0.448898] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.448902] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.460169] Switching to clocksource tsc [ 0.461602] AppArmor: AppArmor Filesystem Enabled [ 0.461621] pnp: PnP ACPI init [ 0.461638] ACPI: bus type pnp registered [ 0.465811] Freeing initrd memory: 8136k freed [ 0.481235] pnp 00:07: io resource (0xfe00-0xfe00) overlaps 0000:00:1c.0 BAR 13 (0xf000-0xffff), disabling [ 0.481538] pnp: PnP ACPI: found 11 devices [ 0.481540] ACPI: ACPI bus type pnp unregistered [ 0.481552] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.481555] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.481557] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.481560] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.481562] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.481564] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.481567] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.481569] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.481575] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.481581] system 00:07: ioport range 0x680-0x69f has been reserved [ 0.481583] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.481586] system 00:07: ioport range 0x1000-0x107f has been reserved [ 0.481588] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 0.481590] system 00:07: ioport range 0x1640-0x164f has been reserved [ 0.486367] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.486370] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.486373] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff [ 0.486376] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.486381] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.486384] pci 0000:00:1c.0: IO window: 0xf000-0xffff [ 0.486390] pci 0000:00:1c.0: MEM window: 0xfb000000-0xfcffffff [ 0.486394] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.486402] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.486405] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.486411] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff [ 0.486416] pci 0000:00:1c.1: PREFETCH window: 0x80200000-0x803fffff [ 0.486423] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.486426] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.486432] pci 0000:00:1c.2: MEM window: 0xf0200000-0xf02fffff [ 0.486437] pci 0000:00:1c.2: PREFETCH window: 0x00000080400000-0x000000805fffff [ 0.486444] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.486448] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.486453] pci 0000:00:1c.3: MEM window: 0xf0400000-0xf04fffff [ 0.486458] pci 0000:00:1c.3: PREFETCH window: 0x80600000-0x807fffff [ 0.486465] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.486467] pci 0000:00:1e.0: IO window: disabled [ 0.486472] pci 0000:00:1e.0: MEM window: disabled [ 0.486476] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.486491] alloc irq_desc for 16 on node -1 [ 0.486493] alloc kstat_irqs on node -1 [ 0.486498] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.486501] pci 0000:00:01.0: setting latency timer to 64 [ 0.486513] alloc irq_desc for 17 on node -1 [ 0.486514] alloc kstat_irqs on node -1 [ 0.486517] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.486522] pci 0000:00:1c.0: setting latency timer to 64 [ 0.486531] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.486536] pci 0000:00:1c.1: setting latency timer to 64 [ 0.486545] alloc irq_desc for 18 on node -1 [ 0.486547] alloc kstat_irqs on node -1 [ 0.486549] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.486554] pci 0000:00:1c.2: setting latency timer to 64 [ 0.486563] alloc irq_desc for 19 on node -1 [ 0.486564] alloc kstat_irqs on node -1 [ 0.486567] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.486572] pci 0000:00:1c.3: setting latency timer to 64 [ 0.486579] pci 0000:00:1e.0: setting latency timer to 64 [ 0.486584] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.486586] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.486588] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.486591] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff] [ 0.486592] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.486595] pci_bus 0000:02: resource 0 io: [0xf000-0xffff] [ 0.486597] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.486598] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff] [ 0.486601] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 0.486603] pci_bus 0000:04: resource 1 mem: [0xf0300000-0xf03fffff] [ 0.486605] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x803fffff] [ 0.486606] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] [ 0.486608] pci_bus 0000:05: resource 1 mem: [0xf0200000-0xf02fffff] [ 0.486610] pci_bus 0000:05: resource 2 pref mem [0x80400000-0x805fffff] [ 0.486613] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.486614] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff] [ 0.486616] pci_bus 0000:06: resource 2 pref mem [0x80600000-0x807fffff] [ 0.486618] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.486620] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.486660] NET: Registered protocol family 2 [ 0.486791] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.487561] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.489562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.490152] TCP: Hash tables configured (established 262144 bind 65536) [ 0.490154] TCP reno registered [ 0.490276] NET: Registered protocol family 1 [ 0.490429] pci 0000:01:00.0: Boot video device [ 0.490481] Simple Boot Flag at 0x36 set to 0x1 [ 0.490656] Scanning for low memory corruption every 60 seconds [ 0.490795] audit: initializing netlink socket (disabled) [ 0.490809] type=2000 audit(1281724602.489:1): initialized [ 0.499125] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.500357] VFS: Disk quotas dquot_6.5.2 [ 0.500404] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.500933] fuse init (API version 7.13) [ 0.501006] msgmni has been set to 4015 [ 0.501184] alg: No test for stdrng (krng) [ 0.501231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.501234] io scheduler noop registered [ 0.501235] io scheduler anticipatory registered [ 0.501237] io scheduler deadline registered [ 0.501268] io scheduler cfq registered (default) [ 0.501393] alloc irq_desc for 24 on node -1 [ 0.501395] alloc kstat_irqs on node -1 [ 0.501402] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.501408] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.501528] alloc irq_desc for 25 on node -1 [ 0.501529] alloc kstat_irqs on node -1 [ 0.501537] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.501548] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.501697] alloc irq_desc for 26 on node -1 [ 0.501698] alloc kstat_irqs on node -1 [ 0.501707] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.501717] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.501860] alloc irq_desc for 27 on node -1 [ 0.501862] alloc kstat_irqs on node -1 [ 0.501870] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.501880] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.502028] alloc irq_desc for 28 on node -1 [ 0.502030] alloc kstat_irqs on node -1 [ 0.502038] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X [ 0.502048] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.502141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.502268] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.502588] ACPI: AC Adapter [AC0] (on-line) [ 0.502686] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.502718] ACPI: Lid Switch [LID0] [ 0.502758] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.502760] ACPI: Power Button [PWRB] [ 0.502795] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.502798] ACPI: Sleep Button [SLPB] [ 0.502849] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.502851] ACPI: Power Button [PWRF] [ 0.503278] Marking TSC unstable due to TSC halts in idle [ 0.503324] Switching to clocksource hpet [ 0.503383] processor LNXCPU:00: registered as cooling_device0 [ 0.503618] processor LNXCPU:01: registered as cooling_device1 [ 0.534876] ACPI: Thermal Zone [THRM] (61 C) [ 0.536153] Linux agpgart interface v0.103 [ 0.536178] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.537277] brd: module loaded [ 0.537679] loop: module loaded [ 0.537745] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.537812] ata_piix 0000:00:1f.1: version 2.13 [ 0.537822] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.537856] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.537941] scsi0 : ata_piix [ 0.538004] scsi1 : ata_piix [ 0.538511] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.538513] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.538800] Fixed MDIO Bus: probed [ 0.538826] PPP generic driver version 2.4.2 [ 0.538855] tun: Universal TUN/TAP device driver, 1.6 [ 0.538857] tun: (C) 1999-2004 Max Krasnyansky [ 0.538926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.538943] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.538953] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.538956] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.538984] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.539014] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.542900] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.542912] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504800 [ 0.559267] ACPI: Battery Slot [BAT0] (battery present) [ 0.570087] usb usb1: configuration #1 chosen from 1 choice [ 0.570110] hub 1-0:1.0: USB hub found [ 0.570117] hub 1-0:1.0: 4 ports detected [ 0.570166] alloc irq_desc for 23 on node -1 [ 0.570168] alloc kstat_irqs on node -1 [ 0.570172] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.570181] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.570184] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.570216] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.570247] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.574117] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.574129] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504c00 [ 0.600091] hub 2-0:1.0: USB hub found [ 0.600239] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.600339] hub 3-0:1.0: USB hub found [ 0.600345] hub 3-0:1.0: 2 ports detected [ 0.600386] alloc kstat_irqs on node -1 [ 0.600464] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.600560] hub 4-0:1.0: USB hub found [ 0.600606] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.600612] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.600615] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.600737] usb usb5: configuration #1 chosen from 1 choice [ 0.600756] hub 5-0:1.0: USB hub found [ 0.600762] hub 5-0:1.0: 2 ports detected [ 0.600804] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.600809] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.600812] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.600981] hub 6-0:1.0: 2 ports detected [ 0.601024] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.601030] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.601033] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.601065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.601091] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.601163] usb usb7: configuration #1 chosen from 1 choice [ 0.601184] hub 7-0:1.0: USB hub found [ 0.601189] hub 7-0:1.0: 2 ports detected [ 0.601266] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.603841] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.604920] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.604926] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.604948] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.604968] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.604986] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.605076] mice: PS/2 mouse device common for all mice [ 0.605236] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.605264] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.605360] device-mapper: uevent: version 1.0.3 [ 0.605445] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.605512] device-mapper: multipath: version 1.1.0 loaded [ 0.605514] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.605695] cpuidle: using governor ladder [ 0.605744] cpuidle: using governor menu [ 0.606035] TCP cubic registered [ 0.606138] NET: Registered protocol family 10 [ 0.606504] lo: Disabled Privacy Extensions [ 0.606745] NET: Registered protocol family 17 [ 0.606843] PM: Resume from disk failed. [ 0.606854] registered taskstats version 1 [ 0.607395] Magic number: 6:479:645 [ 0.607478] rtc_cmos 00:08: setting system clock to 2010-08-13 18:36:43 UTC (1281724603) [ 0.607480] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.607482] EDD information not available. [ 0.640715] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.720358] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, fs03, max UDMA/33 [ 0.760242] ata1.00: configured for UDMA/33 [ 0.765964] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H fs03 PQ: 0 ANSI: 5 [ 0.781126] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.781129] Uniform CD-ROM driver Revision: 3.20 [ 0.781204] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.781242] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.781308] Freeing unused kernel memory: 880k freed [ 0.781618] Write protecting the kernel read-only data: 7696k [ 0.793908] udev: starting version 151 [ 0.849700] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.849727] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.849783] r8169 0000:06:00.0: setting latency timer to 64 [ 0.849861] alloc irq_desc for 29 on node -1 [ 0.849863] alloc kstat_irqs on node -1 [ 0.849880] r8169 0000:06:00.0: irq 29 for MSI/MSI-X [ 0.855252] eth0: RTL8101e at 0xffffc90000350000, 00:03:0d:8c:ac:26, XID 94200000 IRQ 29 [ 0.857802] ahci 0000:00:1f.2: version 3.0 [ 0.857820] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.857864] alloc irq_desc for 30 on node -1 [ 0.857866] alloc kstat_irqs on node -1 [ 0.857877] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 0.857937] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.857940] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.857945] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.878671] scsi2 : ahci [ 0.894154] scsi3 : ahci [ 0.898210] scsi4 : ahci [ 0.898279] ata3: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504100 irq 30 [ 0.898283] ata4: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504180 irq 30 [ 0.898286] ata5: SATA max UDMA/133 abar m2048@0xf0504000 port 0xf0504200 irq 30 [ 1.240032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.268770] ata3.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 [ 1.268773] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.269691] ata3.00: configured for UDMA/133 [ 1.280106] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 [ 1.280245] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.280275] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.280321] sd 2:0:0:0: [sda] Write Protect is off [ 1.280323] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.280344] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.280462] sda: sda1 sda2 [ 1.290413] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.582136] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.690020] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 7.883141] usb 5-1: configuration #1 chosen from 1 choice [ 12.674404] udev: starting version 151 [ 12.911422] [drm] Initialized drm 1.1.0 20060810 [ 12.911799] cfg80211: Calling CRDA to update world regulatory domain [ 12.912347] lirc_dev: IR Remote Control driver registered, major 61 [ 12.912959] lirc_dev: lirc_register_driver: sample_rate: 0 [ 12.929549] lirc_ite8709: device found : irq=10 io=0x260 [ 12.932269] acpi device:03: registered as cooling_device2 [ 12.932303] ACPI: Cant attach device [ 12.932374] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 12.932422] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 12.941935] lp: driver loaded but no devices found [ 12.950404] type=1505 audit(1281724615.835:2): operation="profile_load" pid=694 name="/sbin/dhclient3" [ 12.950972] type=1505 audit(1281724615.835:3): operation="profile_load" pid=694 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.951270] type=1505 audit(1281724615.835:4): operation="profile_load" pid=694 name="/usr/lib/connman/scripts/dhclient-script" [ 12.977782] [drm] radeon defaulting to kernel modesetting. [ 12.977784] [drm] radeon kernel modesetting enabled. [ 12.977834] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.977840] radeon 0000:01:00.0: setting latency timer to 64 [ 12.980229] [drm] radeon: Initializing kernel modesetting. [ 12.981924] [drm] register mmio base: 0xCFEF0000 [ 12.981927] [drm] register mmio size: 65536 [ 12.982005] ATOM BIOS: ECS_U50SA_M72M [ 12.982017] [drm] Clocks initialized ! [ 12.982885] [drm] Detected VRAM RAM=256M, BAR=256M [ 12.982889] [drm] RAM width 64bits DDR [ 12.982970] [TTM] Zone kernel: Available graphics memory: 1028436 kiB. [ 12.982991] [drm] radeon: 256M of VRAM memory ready [ 12.982994] [drm] radeon: 512M of GTT memory ready. [ 12.983057] alloc irq_desc for 31 on node -1 [ 12.983059] alloc kstat_irqs on node -1 [ 12.983072] radeon 0000:01:00.0: irq 31 for MSI/MSI-X [ 12.983079] [drm] radeon: using MSI. [ 12.983117] [drm] radeon: irq initialized. [ 12.983119] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.983692] [drm] Loading RV610 Microcode [ 12.983696] platform radeon_cp.0: firmware: requesting radeon/RV610_pfp.bin [ 12.993982] platform radeon_cp.0: firmware: requesting radeon/RV610_me.bin [ 12.996300] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [ 13.013129] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 13.013132] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 13.013210] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.013224] iwl3945 0000:05:00.0: setting latency timer to 64 [ 13.033768] [drm] ring test succeeded in 1 usecs [ 13.033881] [drm] radeon: ib pool ready. [ 13.033953] [drm] ib test succeeded in 0 usecs [ 13.033955] [drm] Enabling audio support [ 13.034524] [drm] Default TV standard: NTSC [ 13.035706] [drm] Radeon Display Connectors [ 13.035709] [drm] Connector 0: [ 13.035710] [drm] LVDS [ 13.035712] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc [ 13.035713] [drm] Encoders: [ 13.035714] [drm] LCD1: INTERNAL_LVTM1 [ 13.035716] [drm] Connector 1: [ 13.035717] [drm] DIN [ 13.035718] [drm] Encoders: [ 13.035719] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 13.035720] [drm] Connector 2: [ 13.035721] [drm] VGA [ 13.035723] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 13.035724] [drm] Encoders: [ 13.035726] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.035727] [drm] Connector 3: [ 13.035728] [drm] DVI-I [ 13.035729] [drm] HPD1 [ 13.035730] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 13.035732] [drm] Encoders: [ 13.035733] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 13.091929] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 13.091933] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 13.092048] alloc irq_desc for 32 on node -1 [ 13.092050] alloc kstat_irqs on node -1 [ 13.092082] iwl3945 0000:05:00.0: irq 32 for MSI/MSI-X [ 13.105747] usbcore: registered new interface driver hiddev [ 13.108281] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7 [ 13.108367] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 13.116937] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8 [ 13.117058] generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 13.119415] cfg80211: World regulatory domain updated: [ 13.119417] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.119420] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.119422] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.119424] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 13.119427] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.119429] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.124122] generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2 [ 13.124147] usbcore: registered new interface driver usbhid [ 13.124150] usbhid: v2.6:USB HID core driver [ 13.140183] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 13.146065] alloc irq_desc for 22 on node -1 [ 13.146068] alloc kstat_irqs on node -1 [ 13.146075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.146111] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.310186] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 13.404634] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 13.406110] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9 [ 13.412256] type=1505 audit(1281724616.302:5): operation="profile_load" pid=898 name="/usr/share/gdm/guest-session/Xsession" [ 13.413588] type=1505 audit(1281724616.302:6): operation="profile_replace" pid=899 name="/sbin/dhclient3" [ 13.414159] type=1505 audit(1281724616.302:7): operation="profile_replace" pid=899 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.414467] type=1505 audit(1281724616.302:8): operation="profile_replace" pid=899 name="/usr/lib/connman/scripts/dhclient-script" [ 13.416903] type=1505 audit(1281724616.302:9): operation="profile_load" pid=900 name="/usr/bin/evince" [ 13.424151] type=1505 audit(1281724616.312:10): operation="profile_load" pid=900 name="/usr/bin/evince-previewer" [ 13.434757] type=1505 audit(1281724616.322:11): operation="profile_load" pid=900 name="/usr/bin/evince-thumbnailer" [ 13.469155] Registered led device: iwl-phy0::radio [ 13.469306] Registered led device: iwl-phy0::assoc [ 13.469494] Registered led device: iwl-phy0::RX [ 13.469619] Registered led device: iwl-phy0::TX [ 13.491006] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.492168] r8169: eth0: link down [ 13.492382] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.624255] [drm] fb mappable at 0xD0141000 [ 13.624257] [drm] vram apper at 0xD0000000 [ 13.624259] [drm] size 4096000 [ 13.624260] [drm] fb depth is 24 [ 13.624261] [drm] pitch is 5120 [ 13.624410] fb0: radeondrmfb frame buffer device [ 13.624412] registered panic notifier [ 13.624417] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 13.627564] vga16fb: initializing [ 13.627568] vga16fb: mapped to 0xffff8800000a0000 [ 13.627571] vga16fb: not registering due to another framebuffer present [ 13.656003] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 13.691471] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 14.052465] Console: switching to colour frame buffer device 160x50 [ 464.290048] usb 5-1: USB disconnect, address 2 [ 469.270020] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 469.463139] usb 5-1: configuration #1 chosen from 1 choice [ 469.471295] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input11 [ 469.471373] generic-usb 0003:046D:C52B.0004: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 469.474508] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input12 [ 469.474642] generic-usb 0003:046D:C52B.0005: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 469.480132] generic-usb 0003:046D:C52B.0006: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2 [ 511.540051] usb 5-1: USB disconnect, address 3 [ 530.750020] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 531.003138] usb 5-1: configuration #1 chosen from 1 choice [ 531.011295] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input13 [ 531.011370] generic-usb 0003:046D:C52B.0007: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 531.014528] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input14 [ 531.014663] generic-usb 0003:046D:C52B.0008: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 531.021145] generic-usb 0003:046D:C52B.0009: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2 [ 708.255885] wlan0: deauthenticating from 00:1a:2b:12:f1:bd by local choice (reason=3) [ 708.257143] wlan0: direct probe to AP 00:1a:2b:12:f1:bd (try 1) [ 708.450022] wlan0: direct probe to AP 00:1a:2b:12:f1:bd (try 2) [ 708.452371] wlan0: direct probe responded [ 708.452373] wlan0: authenticate with AP 00:1a:2b:12:f1:bd (try 1) [ 708.454324] wlan0: authenticated [ 708.454339] wlan0: associate with AP 00:1a:2b:12:f1:bd (try 1) [ 708.458956] wlan0: RX AssocResp from 00:1a:2b:12:f1:bd (capab=0x411 status=0 aid=1) [ 708.458958] wlan0: associated [ 708.460716] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 708.474846] Intel AES-NI instructions are not detected. [ 708.493702] padlock: VIA PadLock not detected. [ 712.450954] wlan0: deauthenticated from 00:1a:2b:12:f1:bd (Reason: 15) [ 715.252215] wlan0: direct probe to AP 00:1a:2b:12:f1:bd (try 1) [ 715.256453] wlan0: direct probe responded [ 715.256458] wlan0: authenticate with AP 00:1a:2b:12:f1:bd (try 1) [ 715.258964] wlan0: authenticated [ 715.258980] wlan0: associate with AP 00:1a:2b:12:f1:bd (try 1) [ 715.261367] wlan0: RX AssocResp from 00:1a:2b:12:f1:bd (capab=0x411 status=0 aid=1) [ 715.261369] wlan0: associated [ 719.041669] wlan0: no IPv6 routers present [ 730.790052] usb 5-1: USB disconnect, address 4 [ 731.580017] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 731.773168] usb 5-1: configuration #1 chosen from 1 choice [ 731.781341] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input15 [ 731.781428] generic-usb 0003:046D:C52B.000A: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 731.785561] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input16 [ 731.785705] generic-usb 0003:046D:C52B.000B: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 731.793184] generic-usb 0003:046D:C52B.000C: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2