error no suitable mode found error unknown command terminal

[mrtrip2010]

HI to all i just upgrade my xubuntu 9.10 to xubuntu 10.04 and when it start before login it say that errors
error :No suitable mode found
error: unknow command terminal.
After that it login, and the higer resolution it make is 800x600 :( then i cant make it bigger and i cant open a monitor settings program ,i tried ctr+alt+"-" but it just make bigger the resolution.

I think the errors It is complaining that the resolution capability of the video card is too low.

My xorg maybe cant configure my graphic card and thats whay it show me that error.
My graphic card is s3virge with 256 ram .

Please somehelp iam new to ubuntu and i dont know what to do .

HELP!

[kurt belgrave (trinikrono)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. This bug did not have a package associated with it, which is important for ensuring that it gets looked at by the proper developers. You can learn more about finding the right package at https://wiki.ubuntu.com/Bugs/FindRightPackage . I have classified this bug as a bug in xorg.
(With many applications, you can report a future bug directly on the appropriate package by opening the application's "Help" menu and choosing "Report a Problem". https://wiki.ubuntu.com/ReportingBugs)

[Bryce Harrington (bryce)]

Hi mrtrip2010,

        Please attach the output of `lspci -vvnn` too.

    [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]

[mrtrip2010 (mrtrip2010)]

Hi my lspci -vvnn is :

00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M266 Host Bridge [1106:3148]
 Subsystem: Albatron Corp. Device [17f2:3148]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 8
 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
 Capabilities: <access denied>
 Kernel driver in use: agpgart-via
 Kernel modules: via-agp

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel modules: shpchp

00:08.0 VGA compatible controller [0300]: S3 Inc. 86c325 [ViRGE] [5333:5631] (rev 06)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32 (1000ns min, 63750ns max)
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
 [virtual] Expansion ROM at 10000000 [disabled] [size=64K]
 Kernel driver in use: s3fb
 Kernel modules: s3fb

00:0a.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01)
 Subsystem: Conexant Systems, Inc. Device [14f1:2004]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
 Region 1: I/O ports at d000 [size=8]
 Capabilities: <access denied>

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
 Subsystem: Albatron Corp. Device [17f2:3038]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 32, Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 21
 Region 4: I/O ports at d400 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
 Subsystem: Albatron Corp. Device [17f2:3038]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- ...

[mrtrip2010 (mrtrip2010)]

Now abou xorglog i dont know how to post that i dont i dont know what command to uses for that .

My xorg didnt work fine so that why the error comes out .I dont have a sound to i cant play music or any sound from movie .
My xorg file is not in /etc/X11/ or in /root/.
It didnt made .

Thanks for the care :)

[mrtrip2010 (mrtrip2010)]

I have problem with the errors and i dont have any sound.

Please help.

my xorg file is : Section "ServerLayout"
 Identifier "X.org Configured"
 Screen 0 "Screen0" 0 0
 InputDevice "Mouse0" "CorePointer"
 InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
 ModulePath "/usr/lib/xorg/modules"
 FontPath "/usr/share/fonts/X11/misc"
 FontPath "/usr/share/fonts/X11/cyrillic"
 FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/Type1"
 FontPath "/usr/share/fonts/X11/100dpi"
 FontPath "/usr/share/fonts/X11/75dpi"
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
 FontPath "built-ins"
EndSection

Section "Module"
 Load "extmod"
 Load "record"
 Load "dri"
 Load "glx"
 Load "dbe"
 Load "dri2"
EndSection

Section "InputDevice"
 Identifier "Keyboard0"
 Driver "kbd"
EndSection

Section "InputDevice"
 Identifier "Mouse0"
 Driver "mouse"
 Option "Protocol" "auto"
 Option "Device" "/dev/input/mice"
 Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
 Identifier "Monitor0"
 VendorName "Monitor Vendor"
 ModelName "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option "slow_edodram" # [<bool>]
        #Option "slow_dram" # [<bool>]
        #Option "fast_dram" # [<bool>]
        #Option "fpm_vram" # [<bool>]
        #Option "pci_burst" # [<bool>]
        #Option "fifo_conservative" # [<bool>]
        #Option "fifo_moderate" # [<bool>]
        #Option "fifo_aggressive" # [<bool>]
        #Option "pci_retry" # [<bool>]
        #Option "NoAccel" # [<bool>]
        #Option "early_ras_precharge" # [<bool>]
        #Option "late_ras_precharge" # [<bool>]
        #Option "lcd_center" # [<bool>]
        #Option "set_lcdclk" # <i>
        #Option "set_mclk" # <freq>
        #Option "set_refclk" # <freq>
        #Option "show_cache" # [<bool>]
        #Option "HWCursor" # [<bool>]
        #Option "SWCursor" # [<bool>]
        #Option "ShadowFB" # [<bool>]
        #Option "Rotate" # [<str>]
        #Option "mxcr3afix" # [<bool>]
        #Option "XVideo" # [<bool>]
 Identifier "Card0"
 Driver "s3virge"
 VendorName "S3 Inc."
 BoardName "86c325 [ViRGE]"
 BusID "PCI:0:8:0"
EndSection

Section "Screen"
 Identifier "Screen0"
 Device "Card0"
 Monitor "Monitor0"
 SubSection "Display"
  Viewport 0 0
  Depth 1
 EndSubSection
 SubSection "Display"
  Viewport 0 0
  Depth 4
 EndSubSection
 SubSection "Display"
  Viewport 0 0
  Depth 8
 EndSubSection
...

[Launchpad Janitor (janitor)]

[Expired for xorg (Ubuntu) because there has been no activity for 60 days.]