ssb: ERROR: PLL init unknown for device 4322

[JeanF]

I need help...
Newbie here.

I searched and tried ALL I could find to fix my Broadcom BCM4322 and I still have the
ssb: ERROR: PLL init unknown for device 4322
ssb: ERROR: PMU resource config unknown for device 4322
errors.

Those are the first 2 lines when I boot.

HP tx2 TouchSmart
Kernel 2.6.30.9
Ubuntu 8.10 intrepid

Tried to paste the result from the log files but it's too long and could not attach them all....
So ask what you need and I'll reply promptly

Thanks.

[Jeremy Foshee (jeremyfoshee)]

Hi JeanF,

Please be sure to confirm this issue exists with the latest development release of Ubuntu. ISO CD images are available from http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains, please run the following command from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report.

apport-collect -p linux 593472

Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results.

Thanks in advance.

    [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]

[JeanF (jf-seatern)]

I will download and try the latest CD Image in a few days when I have better internet access.
This is the BT4 BackTrack 4 final version and I try to get my internal card to work.

apport-collect -p linux 593472 gives me a 'bash: apport-collect: command not found'

upstream kernel testing: newbie here... way over my head for the time being it seems

[JeanF (jf-seatern)]

Found this in some other bugs:

sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | grep ound; dmesg | grep b43; dmesg | grep wl; dmesg | grep witch; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo /etc/init.d/networking restart

Here is the reply:
 *-network
       description: Network controller
       product: BCM4322 802.11a/b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:08:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=b43-pci-bridge latency=0
  *-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:09:00.0
       logical name: eth0
       version: 02
       serial: 00:23:8b:a8:da:3e
       size: 10MB/s
       capacity: 1GB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
  *-network
       description: Wireless interface
       physical id: 1
       logical name: wlan0
       serial: 00:09:5b:67:ac:0e
       capabilities: ethernet physical wireless
       configuration: broadcast=yes ip=184.48.29.212 multicast=yes wireless=IEEE 802.11-b
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Scan completed :
          Cell 01 - Address: 00:1E:F7:F2:24:D0
                    ESSID:"attwifi"
                    Mode:Master
                    Encryption key:off
                    Channel:11
                    Quality:50/100 Signal level:-66 dBm Noise level:-86 dBm

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp

auto ath0
iface ath0 inet dhcp

auto wlan0
iface wlan0 inet dhcp

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
DISTRIB_DESCRIPTION="Ubuntu 8.10"
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602]
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604]
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391]
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
00:12...

[Mark Rijckenberg (markrijckenberg)]

@JeanF: I think the issue here is two-fold:

1) Your Ubuntu version is too old (Ubuntu 8.10)
2) You are using the wrong driver. You need to use the bcmwl-kernel-source driver package instead of the b43 driver. But I do not think that bcmwl-kernel-source is available in the Ubuntu 8.10 repositories

So I suggest the following:

Install Ubuntu 10.04 from a LiveCD session

Then connect the PC to the wireless router using a wired LAN connection.

Using the wired connection, install bcmwl-kernel-source in Ubuntu 10.04.

[Jeremy Foshee (jeremyfoshee)]

This bug report was marked as Incomplete and has not had any updated comments for quite some time. As a result this bug is being closed. Please reopen if this is still an issue in the current Ubuntu release http://www.ubuntu.com/getubuntu/download . Also, please be sure to provide any requested information that may have been missing. To reopen the bug, click on the current status under the Status column and change the status back to "New". Thanks.

[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]