Kernel oops in bt878 module
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-source-2.6.15 (Ubuntu) |
Invalid
|
High
|
Unassigned |
Bug Description
Binary package hint: linux-image-
Steps to reproduce:
1. Install four bttv-based video capturing PCI cards on a PC, each card having four bttv chips.
2. Boot up the system with 2.6.15-26-686 kernel.
3. A kernel oops will occur (every time), and the system will lock up.
Points worth noting:
* Using 386-optimized kernel, 2.6.15-26-386, this problem does *not* occur.
* With only three cards installed (and thus twelve video4linux devices), this problem does *not* occur with the 686 kernel either.
Hardware information:
Asus P4P800-SE motherboard
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 9
cpu MHz : 2799.251
cache size : 512 KB
The bttv cards have video inputs only, no tuners, no audio input.
Here is the content of dmesg:
[17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Jul 7 19:48:22 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002ffb0000 (usable)
[17179569.184000] BIOS-e820: 000000002ffb0000 - 000000002ffc0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002ffc0000 - 000000002fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 196528
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 192432 pages, LIFO batch:31
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad60
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x02000517 MSFT 0x00000097) @ 0x2ffb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x02000517 MSFT 0x00000097) @ 0x2ffb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x02000517 MSFT 0x00000097) @ 0x2ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x02000517 MSFT 0x00000097) @ 0x2ffc0040
[17179569.184000] ACPI: DSDT (v001 A0049 A0049000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfb80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro lang=fi emergency
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2799.251 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.712000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.712000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.732000] Memory: 767208k/786112k available (2110k kernel code, 18312k reserved, 595k data, 332k init, 0k highmem)
[17179571.732000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.812000] Calibrating delay using timer specific routine.. 5603.45 BogoMIPS (lpj=11206908)
[17179571.812000] Security Framework v1.0.0 initialized
[17179571.812000] SELinux: Disabled at boot.
[17179571.812000] Mount-cache hash table entries: 512
[17179571.812000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179571.812000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179571.812000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179571.812000] CPU: L2 cache: 512K
[17179571.812000] CPU: Hyper-Threading is disabled
[17179571.812000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179571.812000] mtrr: v2.0 (20020519)
[17179571.812000] Enabling fast FPU save and restore... done.
[17179571.812000] Enabling unmasked SIMD FPU exception support... done.
[17179571.812000] Checking 'hlt' instruction... OK.
[17179571.828000] SMP alternatives: switching to UP code
[17179571.828000] checking if image is initramfs... it is
[17179572.296000] Freeing initrd memory: 6811k freed
[17179572.308000] ACPI: Looking for DSDT ... not found!
[17179572.312000] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[17179572.312000] Total of 1 processors activated (5603.45 BogoMIPS).
[17179572.312000] ENABLING IO-APIC IRQs
[17179572.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.456000] Brought up 1 CPUs
[17179572.456000] NET: Registered protocol family 16
[17179572.456000] EISA bus registered
[17179572.456000] ACPI: bus type pci registered
[17179572.456000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=6
[17179572.456000] PCI: Using configuration type 1
[17179572.456000] ACPI: Subsystem revision 20051216
[17179572.460000] ACPI: Interpreter enabled
[17179572.460000] ACPI: Using IOAPIC for interrupt routing
[17179572.460000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.460000] PCI: Probing PCI hardware (bus 00)
[17179572.464000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[17179572.464000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179572.464000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.464000] Boot video device is 0000:01:00.0
[17179572.464000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.468000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.480000] ACPI: PCI Interrupt Routing Table [\_SB_.
[17179572.484000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179572.484000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179572.488000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179572.492000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.492000] pnp: PnP ACPI init
[17179572.496000] pnp: PnP ACPI: found 12 devices
[17179572.496000] ASUS P4P800 detected. Disabling PnPBIOS
[17179572.496000] PnPBIOS: Disabled
[17179572.496000] PCI: Using ACPI for IRQ routing
[17179572.496000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.524000] pnp: 00:08: ioport range 0x680-0x6ff has been reserved
[17179572.524000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[17179572.524000] PCI: Bridge: 0000:00:01.0
[17179572.524000] IO window: disabled.
[17179572.524000] MEM window: fc900000-fe9fffff
[17179572.524000] PREFETCH window: e7b00000-f7afffff
[17179572.524000] PCI: Bridge: 0000:02:09.0
[17179572.524000] IO window: disabled.
[17179572.524000] MEM window: disabled.
[17179572.524000] PREFETCH window: f7b00000-f7bfffff
[17179572.524000] PCI: Bridge: 0000:02:0a.0
[17179572.524000] IO window: disabled.
[17179572.524000] MEM window: disabled.
[17179572.524000] PREFETCH window: f7c00000-f7cfffff
[17179572.524000] PCI: Bridge: 0000:02:0b.0
[17179572.524000] IO window: disabled.
[17179572.524000] MEM window: disabled.
[17179572.524000] PREFETCH window: f7d00000-f7dfffff
[17179572.524000] PCI: Bridge: 0000:02:0c.0
[17179572.524000] IO window: disabled.
[17179572.524000] MEM window: disabled.
[17179572.524000] PREFETCH window: f7e00000-f7efffff
[17179572.524000] PCI: Bridge: 0000:00:1e.0
[17179572.524000] IO window: d000-dfff
[17179572.524000] MEM window: fea00000-feafffff
[17179572.524000] PREFETCH window: f7b00000-f7efffff
[17179572.524000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.524000] audit: initializing netlink socket (disabled)
[17179572.524000] audit(115279056
[17179572.524000] VFS: Disk quotas dquot_6.5.1
[17179572.524000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.524000] Initializing Cryptographic API
[17179572.524000] io scheduler noop registered
[17179572.524000] io scheduler anticipatory registered
[17179572.528000] io scheduler deadline registered
[17179572.528000] io scheduler cfq registered
[17179572.528000] isapnp: Scanning for PnP cards...
[17179572.880000] isapnp: No Plug & Play device found
[17179572.900000] Real Time Clock Driver v1.12
[17179572.900000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179572.900000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179572.900000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.900000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179572.900000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.900000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.904000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.904000] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179572.904000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.904000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.904000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.904000] mice: PS/2 mouse device common for all mice
[17179572.904000] EISA: Probing bus 0 at eisa.0
[17179572.904000] EISA: Detected 0 cards.
[17179572.908000] NET: Registered protocol family 2
[17179572.948000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.948000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[17179572.948000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179572.948000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.948000] TCP reno registered
[17179572.948000] TCP bic registered
[17179572.952000] NET: Registered protocol family 1
[17179572.952000] NET: Registered protocol family 8
[17179572.952000] NET: Registered protocol family 20
[17179572.952000] Using IPI No-Shortcut mode
[17179572.952000] ACPI wakeup devices:
[17179572.952000] P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K ILAN
[17179572.952000] ACPI: (supports S0 S1 S3 S4 S5)
[17179572.952000] Freeing unused kernel memory: 332k freed
[17179573.000000] Capability LSM initialized
[17179573.088000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.572000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[17179573.572000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179573.572000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[17179573.572000] ICH5: chipset revision 2
[17179573.572000] ICH5: not 100% native mode: will probe irqs later
[17179573.572000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
[17179573.572000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179573.572000] Probing IDE interface ide0...
[17179574.140000] Probing IDE interface ide1...
[17179574.876000] hdc: CD-952E/AKV, ATAPI CD/DVD-ROM drive
[17179575.212000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.220000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
[17179575.224000] Uniform CD-ROM driver Revision: 3.20
[17179575.256000] SCSI subsystem initialized
[17179575.260000] ACPI: bus type scsi registered
[17179575.260000] libata version 1.20 loaded.
[17179575.260000] ata_piix 0000:00:1f.2: version 1.05
[17179575.260000] ata_pci_init_one: pci_dev class+intf: 0x1018f
[17179575.260000] ata_pci_init_one: NO_LEGACY == 0
[17179575.260000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
[17179575.260000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179575.264000] ata1: PATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF60 irq 169
[17179575.264000] ata2: PATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF68 irq 169
[17179575.428000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff 93:0000
[17179575.428000] ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
[17179575.428000] sata_get_
[17179575.432000] ata1: dev 0 configured for UDMA/133
[17179575.432000] sata_get_
[17179575.436000] scsi0 : ata_piix
[17179576.664000] scsi1 : ata_piix
[17179576.664000] Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
[17179576.668000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.676000] Driver 'sd' needs updating - please use bus_type methods
[17179576.676000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179576.676000] SCSI device sda: drive cache: write back
[17179576.680000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179576.680000] SCSI device sda: drive cache: write back
[17179576.680000] sda: sda1 sda2 < sda5 >
[17179576.720000] sd 0:0:0:0: Attached scsi disk sda
[17179576.900000] usbcore: registered new driver usbfs
[17179576.900000] usbcore: registered new driver hub
[17179576.900000] USB Universal Host Controller Interface driver v2.3
[17179576.900000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179576.900000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.900000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.904000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179576.904000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000ef00
[17179576.904000] hub 1-0:1.0: USB hub found
[17179576.904000] hub 1-0:1.0: 2 ports detected
[17179577.008000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[17179577.008000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.008000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.008000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.008000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000ef20
[17179577.008000] hub 2-0:1.0: USB hub found
[17179577.008000] hub 2-0:1.0: 2 ports detected
[17179577.112000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[17179577.112000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.112000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.112000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.112000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ef40
[17179577.112000] hub 3-0:1.0: USB hub found
[17179577.112000] hub 3-0:1.0: 2 ports detected
[17179577.216000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
[17179577.216000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.216000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.216000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.216000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000ef80
[17179577.216000] hub 4-0:1.0: USB hub found
[17179577.216000] hub 4-0:1.0: 2 ports detected
[17179577.248000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[17179577.320000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[17179577.320000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.320000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.320000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.320000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.324000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.324000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfebffc00
[17179577.328000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.328000] hub 5-0:1.0: USB hub found
[17179577.328000] hub 5-0:1.0: 8 ports detected
[17179577.448000] Probing IDE interface ide0...
[17179577.772000] usb 1-1: device not accepting address 2, error -71
[17179578.044000] Attempting manual resume
[17179578.064000] kjournald starting. Commit interval 5 seconds
[17179578.064000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.564000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[17179578.976000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[17179596.428000] EXT3 FS on sda1, internal journal
[17179606.872000] Linux video capture interface: v1.00
[17179606.916000] bttv: driver version 0.9.16 loaded
[17179606.916000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179606.916000] bttv: Bt8xx card found (0).
[17179606.916000] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179606.916000] bttv0: Bt878 (rev 17) at 0000:03:08.0, irq: 201, latency: 64, mmio: 0xf7bfe000
[17179606.916000] bttv0: using: ProVideo PV143 [card=105,insmod option]
[17179606.916000] bttv0: gpio: en=00000000, out=00000000 in=00ff9f00 [init]
[17179606.916000] bttv0: using tuner=-1
[17179606.916000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179606.920000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179606.924000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179606.924000] bttv0: registered device video0
[17179606.924000] bttv0: registered device vbi0
[17179606.924000] bttv0: PLL: 28636363 => 35468950 .. ok
[17179606.956000] bttv: Bt8xx card found (1).
[17179606.956000] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 22 (level, low) -> IRQ 209
[17179606.956000] bttv1: Bt878 (rev 17) at 0000:03:09.0, irq: 209, latency: 64, mmio: 0xf7bfc000
[17179606.956000] bttv1: using: ProVideo PV143 [card=105,insmod option]
[17179606.956000] bttv1: gpio: en=00000000, out=00000000 in=00ffbfff [init]
[17179606.956000] bttv1: using tuner=-1
[17179606.956000] bttv1: i2c: checking for TDA9875 @ 0xb0... not found
[17179606.960000] bttv1: i2c: checking for TDA7432 @ 0x8a... not found
[17179606.964000] bttv1: i2c: checking for TDA9887 @ 0x86... not found
[17179606.964000] bttv1: registered device video1
[17179606.964000] bttv1: registered device vbi1
[17179606.964000] bttv1: PLL: 28636363 => 35468950 .. ok
[17179606.996000] bttv: Bt8xx card found (2).
[17179606.996000] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179606.996000] bttv2: Bt878 (rev 17) at 0000:03:0a.0, irq: 193, latency: 64, mmio: 0xf7bfa000
[17179606.996000] bttv2: using: ProVideo PV143 [card=105,insmod option]
[17179606.996000] bttv2: gpio: en=00000000, out=00000000 in=00ffdfff [init]
[17179606.996000] bttv2: using tuner=-1
[17179606.996000] bttv2: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.000000] bttv2: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.004000] bttv2: i2c: checking for TDA9887 @ 0x86... not found
[17179607.004000] bttv2: registered device video2
[17179607.004000] bttv2: registered device vbi2
[17179607.004000] bttv2: PLL: 28636363 => 35468950 .. ok
[17179607.036000] bttv: Bt8xx card found (3).
[17179607.036000] ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179607.036000] bttv3: Bt878 (rev 17) at 0000:03:0b.0, irq: 217, latency: 64, mmio: 0xf7bf8000
[17179607.036000] bttv3: using: ProVideo PV143 [card=105,insmod option]
[17179607.036000] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179607.036000] bttv3: using tuner=-1
[17179607.036000] bttv3: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.040000] bttv3: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.044000] bttv3: i2c: checking for TDA9887 @ 0x86... not found
[17179607.044000] bttv3: registered device video3
[17179607.044000] bttv3: registered device vbi3
[17179607.044000] bttv3: PLL: 28636363 => 35468950 .. ok
[17179607.076000] bttv: Bt8xx card found (4).
[17179607.076000] ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 22 (level, low) -> IRQ 209
[17179607.076000] bttv4: Bt878 (rev 17) at 0000:04:08.0, irq: 209, latency: 64, mmio: 0xf7cfe000
[17179607.076000] bttv4: using: ProVideo PV143 [card=105,insmod option]
[17179607.076000] bttv4: gpio: en=00000000, out=00000000 in=00ff9f00 [init]
[17179607.076000] bttv4: using tuner=-1
[17179607.076000] bttv4: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.080000] bttv4: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.084000] bttv4: i2c: checking for TDA9887 @ 0x86... not found
[17179607.084000] bttv4: registered device video4
[17179607.084000] bttv4: registered device vbi4
[17179607.084000] bttv4: PLL: 28636363 => 35468950 .. ok
[17179607.116000] bttv: Bt8xx card found (5).
[17179607.116000] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179607.116000] bttv5: Bt878 (rev 17) at 0000:04:09.0, irq: 193, latency: 64, mmio: 0xf7cfc000
[17179607.116000] bttv5: using: ProVideo PV143 [card=105,insmod option]
[17179607.116000] bttv5: gpio: en=00000000, out=00000000 in=00ffbfff [init]
[17179607.116000] bttv5: using tuner=-1
[17179607.116000] bttv5: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.120000] bttv5: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.124000] bttv5: i2c: checking for TDA9887 @ 0x86... not found
[17179607.124000] bttv5: registered device video5
[17179607.124000] bttv5: registered device vbi5
[17179607.124000] bttv5: PLL: 28636363 => 35468950 .. ok
[17179607.156000] bttv: Bt8xx card found (6).
[17179607.156000] ACPI: PCI Interrupt 0000:04:0a.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179607.156000] bttv6: Bt878 (rev 17) at 0000:04:0a.0, irq: 217, latency: 64, mmio: 0xf7cfa000
[17179607.156000] bttv6: using: ProVideo PV143 [card=105,insmod option]
[17179607.156000] bttv6: gpio: en=00000000, out=00000000 in=00ffdfff [init]
[17179607.156000] bttv6: using tuner=-1
[17179607.156000] bttv6: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.160000] bttv6: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.164000] bttv6: i2c: checking for TDA9887 @ 0x86... not found
[17179607.164000] bttv6: registered device video6
[17179607.164000] bttv6: registered device vbi6
[17179607.164000] bttv6: PLL: 28636363 => 35468950 .. ok
[17179607.196000] bttv: Bt8xx card found (7).
[17179607.196000] ACPI: PCI Interrupt 0000:04:0b.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179607.196000] bttv7: Bt878 (rev 17) at 0000:04:0b.0, irq: 201, latency: 64, mmio: 0xf7cf8000
[17179607.196000] bttv7: using: ProVideo PV143 [card=105,insmod option]
[17179607.196000] bttv7: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179607.196000] bttv7: using tuner=-1
[17179607.196000] bttv7: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.200000] bttv7: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.204000] bttv7: i2c: checking for TDA9887 @ 0x86... not found
[17179607.204000] bttv7: registered device video7
[17179607.204000] bttv7: registered device vbi7
[17179607.204000] bttv7: PLL: 28636363 => 35468950 .. ok
[17179607.236000] bttv: Bt8xx card found (8).
[17179607.236000] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179607.236000] bttv8: Bt878 (rev 17) at 0000:05:08.0, irq: 193, latency: 64, mmio: 0xf7dfe000
[17179607.236000] bttv8: using: ProVideo PV143 [card=105,insmod option]
[17179607.236000] bttv8: gpio: en=00000000, out=00000000 in=00ff9f00 [init]
[17179607.236000] bttv8: using tuner=-1
[17179607.236000] bttv8: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.240000] bttv8: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.244000] bttv8: i2c: checking for TDA9887 @ 0x86... not found
[17179607.244000] bttv8: registered device video8
[17179607.244000] bttv8: registered device vbi8
[17179607.244000] bttv8: PLL: 28636363 => 35468950 .. ok
[17179607.276000] bttv: Bt8xx card found (9).
[17179607.276000] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179607.276000] bttv9: Bt878 (rev 17) at 0000:05:09.0, irq: 217, latency: 64, mmio: 0xf7dfc000
[17179607.276000] bttv9: using: ProVideo PV143 [card=105,insmod option]
[17179607.276000] bttv9: gpio: en=00000000, out=00000000 in=00ffbfff [init]
[17179607.276000] bttv9: using tuner=-1
[17179607.276000] bttv9: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.280000] bttv9: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.284000] bttv9: i2c: checking for TDA9887 @ 0x86... not found
[17179607.284000] bttv9: registered device video9
[17179607.284000] bttv9: registered device vbi9
[17179607.284000] bttv9: PLL: 28636363 => 35468950 .. ok
[17179607.316000] bttv: Bt8xx card found (10).
[17179607.316000] ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179607.316000] bttv10: Bt878 (rev 17) at 0000:05:0a.0, irq: 201, latency: 64, mmio: 0xf7dfa000
[17179607.316000] bttv10: using: ProVideo PV143 [card=105,insmod option]
[17179607.316000] bttv10: gpio: en=00000000, out=00000000 in=00ffdfff [init]
[17179607.316000] bttv10: using tuner=-1
[17179607.316000] bttv10: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.320000] bttv10: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.324000] bttv10: i2c: checking for TDA9887 @ 0x86... not found
[17179607.324000] bttv10: registered device video10
[17179607.324000] bttv10: registered device vbi10
[17179607.324000] bttv10: PLL: 28636363 => 35468950 .. ok
[17179607.356000] bttv: Bt8xx card found (11).
[17179607.356000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 22 (level, low) -> IRQ 209
[17179607.356000] bttv11: Bt878 (rev 17) at 0000:05:0b.0, irq: 209, latency: 64, mmio: 0xf7df8000
[17179607.356000] bttv11: using: ProVideo PV143 [card=105,insmod option]
[17179607.356000] bttv11: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179607.356000] bttv11: using tuner=-1
[17179607.356000] bttv11: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.360000] bttv11: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.364000] bttv11: i2c: checking for TDA9887 @ 0x86... not found
[17179607.364000] bttv11: registered device video11
[17179607.364000] bttv11: registered device vbi11
[17179607.364000] bttv11: PLL: 28636363 => 35468950 .. ok
[17179607.396000] bttv: Bt8xx card found (12).
[17179607.396000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179607.396000] bttv12: Bt878 (rev 17) at 0000:06:08.0, irq: 217, latency: 64, mmio: 0xf7efe000
[17179607.396000] bttv12: using: ProVideo PV143 [card=105,insmod option]
[17179607.396000] bttv12: gpio: en=00000000, out=00000000 in=00ff9f00 [init]
[17179607.396000] bttv12: using tuner=-1
[17179607.396000] bttv12: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.400000] bttv12: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.404000] bttv12: i2c: checking for TDA9887 @ 0x86... not found
[17179607.404000] bttv12: registered device video12
[17179607.404000] bttv12: registered device vbi12
[17179607.404000] bttv12: PLL: 28636363 => 35468950 .. ok
[17179607.436000] bttv: Bt8xx card found (13).
[17179607.436000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 21 (level, low) -> IRQ 201
[17179607.436000] bttv13: Bt878 (rev 17) at 0000:06:09.0, irq: 201, latency: 64, mmio: 0xf7efc000
[17179607.436000] bttv13: using: ProVideo PV143 [card=105,insmod option]
[17179607.436000] bttv13: gpio: en=00000000, out=00000000 in=00ffbfff [init]
[17179607.436000] bttv13: using tuner=-1
[17179607.436000] bttv13: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.440000] bttv13: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.444000] bttv13: i2c: checking for TDA9887 @ 0x86... not found
[17179607.444000] bttv13: registered device video13
[17179607.444000] bttv13: registered device vbi13
[17179607.444000] bttv13: PLL: 28636363 => 35468950 .. ok
[17179607.476000] bttv: Bt8xx card found (14).
[17179607.476000] ACPI: PCI Interrupt 0000:06:0a.0[A] -> GSI 22 (level, low) -> IRQ 209
[17179607.476000] bttv14: Bt878 (rev 17) at 0000:06:0a.0, irq: 209, latency: 64, mmio: 0xf7efa000
[17179607.476000] bttv14: using: ProVideo PV143 [card=105,insmod option]
[17179607.476000] bttv14: gpio: en=00000000, out=00000000 in=00ffdfff [init]
[17179607.476000] bttv14: using tuner=-1
[17179607.476000] bttv14: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.480000] bttv14: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.484000] bttv14: i2c: checking for TDA9887 @ 0x86... not found
[17179607.484000] bttv14: registered device video14
[17179607.484000] bttv14: registered device vbi14
[17179607.484000] bttv14: PLL: 28636363 => 35468950 .. ok
[17179607.516000] bttv: Bt8xx card found (15).
[17179607.516000] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
[17179607.516000] bttv15: Bt878 (rev 17) at 0000:06:0b.0, irq: 193, latency: 64, mmio: 0xf7ef8000
[17179607.516000] bttv15: using: ProVideo PV143 [card=105,insmod option]
[17179607.516000] bttv15: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179607.516000] bttv15: using tuner=-1
[17179607.516000] bttv15: i2c: checking for TDA9875 @ 0xb0... not found
[17179607.520000] bttv15: i2c: checking for TDA7432 @ 0x8a... not found
[17179607.524000] bttv15: i2c: checking for TDA9887 @ 0x86... not found
[17179607.524000] bttv15: registered device video15
[17179607.524000] bttv15: registered device vbi15
[17179607.524000] bttv15: PLL: 28636363 => 35468950 .. ok
[17179617.808000] bt878: AUDIO driver version 0.0.0 loaded
[17179617.808000] bt878: Bt878 AUDIO function found (0).
[17179617.808000] ACPI: PCI Interrupt 0000:03:08.1[A] -> GSI 21 (level, low) -> IRQ 201
[17179617.808000] bt878(0): Bt878 (rev 17) at 03:08.1, irq: 201, latency: 64, memory: 0xf7bff000
[17179617.808000] bt878: Bt878 AUDIO function found (1).
[17179617.808000] ACPI: PCI Interrupt 0000:03:09.1[A] -> GSI 22 (level, low) -> IRQ 209
[17179617.808000] bt878(1): Bt878 (rev 17) at 03:09.1, irq: 209, latency: 64, memory: 0xf7bfd000
[17179617.808000] bt878: Bt878 AUDIO function found (2).
[17179617.808000] ACPI: PCI Interrupt 0000:03:0a.1[A] -> GSI 23 (level, low) -> IRQ 193
[17179617.808000] bt878(2): Bt878 (rev 17) at 03:0a.1, irq: 193, latency: 64, memory: 0xf7bfb000
[17179617.808000] bt878: Bt878 AUDIO function found (3).
[17179617.808000] ACPI: PCI Interrupt 0000:03:0b.1[A] -> GSI 20 (level, low) -> IRQ 217
[17179617.808000] bt878(3): Bt878 (rev 17) at 03:0b.1, irq: 217, latency: 64, memory: 0xf7bf9000
[17179617.808000] bt878: Bt878 AUDIO function found (4).
[17179617.808000] ACPI: PCI Interrupt 0000:04:08.1[A] -> GSI 22 (level, low) -> IRQ 209
[17179617.808000] bt878(4): Bt878 (rev 17) at 04:08.1, irq: 209, latency: 64, memory: 0xf7cff000
[17179617.808000] bt878: Bt878 AUDIO function found (5).
[17179617.808000] ACPI: PCI Interrupt 0000:04:09.1[A] -> GSI 23 (level, low) -> IRQ 193
[17179617.808000] bt878(5): Bt878 (rev 17) at 04:09.1, irq: 193, latency: 64, memory: 0xf7cfd000
[17179617.812000] bt878: Bt878 AUDIO function found (6).
[17179617.812000] ACPI: PCI Interrupt 0000:04:0a.1[A] -> GSI 20 (level, low) -> IRQ 217
[17179617.812000] bt878(6): Bt878 (rev 17) at 04:0a.1, irq: 217, latency: 64, memory: 0xf7cfb000
[17179617.812000] bt878: Bt878 AUDIO function found (7).
[17179617.812000] ACPI: PCI Interrupt 0000:04:0b.1[A] -> GSI 21 (level, low) -> IRQ 201
[17179617.812000] bt878(7): Bt878 (rev 17) at 04:0b.1, irq: 201, latency: 64, memory: 0xf7cf9000
[17179617.812000] bt878: Bt878 AUDIO function found (8).
[17179617.812000] ACPI: PCI Interrupt 0000:05:08.1[A] -> GSI 23 (level, low) -> IRQ 193
[17179617.812000] bt878(8): Bt878 (rev 17) at 05:08.1, irq: 193, latency: 64, memory: 0xf7dff000
[17179617.812000] bt878: Bt878 AUDIO function found (9).
[17179617.812000] ACPI: PCI Interrupt 0000:05:09.1[A] -> GSI 20 (level, low) -> IRQ 217
[17179617.812000] bt878(9): Bt878 (rev 17) at 05:09.1, irq: 217, latency: 64, memory: 0xf7dfd000
[17179617.812000] bt878: Bt878 AUDIO function found (10).
[17179617.812000] ACPI: PCI Interrupt 0000:05:0a.1[A] -> GSI 21 (level, low) -> IRQ 201
[17179617.812000] bt878(10): Bt878 (rev 17) at 05:0a.1, irq: 201, latency: 64, memory: 0xf7dfb000
[17179617.812000] bt878: Bt878 AUDIO function found (11).
[17179617.812000] ACPI: PCI Interrupt 0000:05:0b.1[A] -> GSI 22 (level, low) -> IRQ 209
[17179617.812000] bt878(11): Bt878 (rev 17) at 05:0b.1, irq: 209, latency: 64, memory: 0xf7df9000
[17179617.812000] bt878: buffer size error!
[17179617.812000] bt878: Bt878 AUDIO function found (12).
[17179617.812000] ACPI: PCI Interrupt 0000:06:08.1[A] -> GSI 20 (level, low) -> IRQ 217
[17179617.812000] bt878(12): Bt878 (rev 17) at 06:08.1, irq: 217, latency: 64, memory: 0xf7eff000
[17179617.812000] bt878: Bt878 AUDIO function found (13).
[17179617.812000] ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 21 (level, low) -> IRQ 201
[17179617.812000] bt878(13): Bt878 (rev 17) at 06:09.1, irq: 201, latency: 64, memory: 0xf7efd000
[17179617.812000] bt878: Bt878 AUDIO function found (14).
[17179617.812000] ACPI: PCI Interrupt 0000:06:0a.1[A] -> GSI 22 (level, low) -> IRQ 209
[17179617.812000] Unable to handle kernel paging request at virtual address f098800c
[17179617.812000] printing eip:
[17179617.812000] f0985810
[17179617.816000] *pde = 1ffec067
[17179617.816000] Oops: 0002 [#1]
[17179617.816000] PREEMPT SMP
[17179617.816000] Modules linked in: bt878 bttv video_buf i2c_algo_bit v4l2_common btcx_risc tveeprom i2c_core videodev ext3 jbd ide_generic ehci_hcd uhci_hcd usbcore sd_mod ata_piix libata scsi_mod ide_cd cdrom piix generic thermal processor fan fbcon tileblit font bitblit softcursor capability commoncap
[17179617.816000] CPU: 0
[17179617.816000] EIP: 0060:[<f0985810>] Not tainted VLI
[17179617.816000] EFLAGS: 00010246 (2.6.15-26-686)
[17179617.816000] EIP is at bt878_probe+
[17179617.816000] eax: 00000000 ebx: fffffffb ecx: 0000000e edx: 00000046
[17179617.816000] esi: f0987520 edi: f0987fe8 ebp: dff4d400 esp: ee891e84
[17179617.816000] ds: 007b es: 007b ss: 0068
[17179617.816000] Process modprobe (pid: 2145, threadinfo=ee890000 task=dfc8ea90)
[17179617.816000] Stack: dff4d400 0000000e dfe5cd44 00000000 f0987520 c0206a9a f09874e0 dff4d400
[17179617.816000] dff4d400 f0987520 f0987548 f0987548 c0206bd6 dff4d400 f09874e0 f09874e0
[17179617.816000] f0987520 dff4d400 c0206c1f f0987520 dff4d400 dff4d444 dff4d444 c0263094
[17179617.816000] Call Trace:
[17179617.816000] [<c0206a9a>] pci_match_
[17179617.816000] [<c0206bd6>] __pci_device_
[17179617.816000] [<c0206c1f>] pci_device_
[17179617.816000] [<c0263094>] driver_
[17179617.816000] [<c02631b0>] __driver_
[17179617.816000] [<c02631f3>] __driver_
[17179617.816000] [<c02625ad>] bus_for_
[17179617.816000] [<c0263225>] driver_
[17179617.816000] [<c02631b0>] __driver_
[17179617.816000] [<c0262b09>] bus_add_
[17179617.816000] [<c0206ec5>] __pci_register_
[17179617.816000] [<c0124eeb>] printk+0x1b/0x20
[17179617.816000] [<f0985c4f>] bt878_init_
[17179617.816000] [<c0144a6c>] sys_init_
[17179617.816000] [<c0103487>] sysenter_
[17179617.816000] Code: 89 2c 24 e8 e3 ef 87 cf 85 c0 0f 85 27 02 00 00 8b 0d 20 78 98 f0 8d 14 89 8d 04 d5 00 00 00 00 29 d0 8d 3c 85 40 78 98 f0 31 c0 <89> 6f 24 89 4f 18 89 87 88 00 00 00 0f b7 45 26 89 47 28 8b 85
[17179617.816000]
Thank your for your bug report. Do you still have this issue with the latest release of Ubuntu ?