libvirtd: errors/warnings after start

[zigi]

Hi,

After the start of libvirt-bin I get the following errors/warnings in syslog:

Feb 15 06:05:50 sweetie libvirtd: 06:05:50.777: error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012
Feb 15 06:05:50 sweetie libvirtd: 06:05:50.777: error : udevStrToLong_ui:73 : Failed to convert 'e0' to unsigned int#012
Feb 15 06:05:50 sweetie libvirtd: 06:05:50.777: error : udevStrToLong_ui:73 : Failed to convert 'e0' to unsigned int#012
Feb 15 06:05:50 sweetie libvirtd: 06:05:50.777: error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012
Feb 15 06:05:50 sweetie libvirtd: 06:05:50.777: error : udevStrToLong_ui:73 : Failed to convert 'fe' to unsigned int#012
Feb 15 06:05:50 sweetie libvirtd: 06:05:50.830: error : udevStrToLong_ui:73 : Failed to convert '008' to unsigned int#012

Ubuntu: 10.04 lucid
libvirt-bin: 0.7.5-5ubuntu7
udev: 151-5

[Mathias Gug (mathiaz)]

Do you have libvirt guest defined? If so could you post the configuration of each guest?

[zigi (ziegleka)]

I haven't defined any guest. The errors are from syslog after fresh start of system.

[Dustin Kirkland  (kirkland)]

Confirmed, I have the same errors on my Lucid system. They look benign, though. I can't see any mal-effects.

[burivoy (burivoy)]

I have hp pavilion zv5000 and Huawei pcmcia ec500 modem. It is defined by Lucid in 50% of cases with the same error:

error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012

Also there are errors regarding some device string length:

libvirtd: 23:12:14.930: error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012

Have no idea ho to handle it.

[burivoy (burivoy)]

This fault happens several times:

May 3 23:40:59 Doors libvirtd: 23:40:59.660: error : udevTranslatePCIIds:366 : Failed to initialize libpciaccess#012
May 3 23:40:59 Doors kernel: [ 184.972034] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
May 3 23:40:59 Doors kernel: [ 184.972087] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 3 23:40:59 Doors kernel: [ 184.972156] pci 0000:03:00.0: supports D1 D2
May 3 23:40:59 Doors kernel: [ 184.972160] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
May 3 23:40:59 Doors kernel: [ 184.972166] pci 0000:03:00.0: PME# disabled
May 3 23:40:59 Doors kernel: [ 184.972215] pci 0000:03:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
May 3 23:40:59 Doors kernel: [ 184.972279] pci 0000:03:00.1: supports D1 D2
May 3 23:40:59 Doors kernel: [ 184.972282] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
May 3 23:40:59 Doors kernel: [ 184.972288] pci 0000:03:00.1: PME# disabled
May 3 23:40:59 Doors kernel: [ 184.972455] ohci_hcd 0000:03:00.0: enabling device (0000 -> 0002)
May 3 23:40:59 Doors kernel: [ 184.972468] ohci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
May 3 23:40:59 Doors kernel: [ 184.972519] ohci_hcd 0000:03:00.0: setting latency timer to 64
May 3 23:40:59 Doors kernel: [ 184.972524] ohci_hcd 0000:03:00.0: OHCI Host Controller
May 3 23:40:59 Doors kernel: [ 184.972653] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
May 3 23:40:59 Doors kernel: [ 184.972683] ohci_hcd 0000:03:00.0: irq 17, io mem 0x94000000
May 3 23:40:59 Doors kernel: [ 185.058843] usb usb6: configuration #1 chosen from 1 choice
May 3 23:40:59 Doors kernel: [ 185.060456] hub 6-0:1.0: USB hub found
May 3 23:40:59 Doors kernel: [ 185.060489] hub 6-0:1.0: 1 port detected
May 3 23:40:59 Doors kernel: [ 185.061640] ohci_hcd 0000:03:00.1: enabling device (0000 -> 0002)
May 3 23:40:59 Doors kernel: [ 185.061667] ohci_hcd 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
May 3 23:40:59 Doors kernel: [ 185.061736] ohci_hcd 0000:03:00.1: setting latency timer to 64
May 3 23:40:59 Doors kernel: [ 185.061744] ohci_hcd 0000:03:00.1: OHCI Host Controller
May 3 23:40:59 Doors kernel: [ 185.062123] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
May 3 23:40:59 Doors kernel: [ 185.062168] ohci_hcd 0000:03:00.1: irq 17, io mem 0x94001000
May 3 23:40:59 Doors libvirtd: 23:40:59.754: error : udevTranslatePCIIds:366 : Failed to initialize libpciaccess#012
May 3 23:40:59 Doors kernel: [ 185.146240] usb usb7: configuration #1 chosen from 1 choice
May 3 23:40:59 Doors kernel: [ 185.146426] hub 7-0:1.0: USB hub found
May 3 23:40:59 Doors kernel: [ 185.146460] hub 7-0:1.0: 1 port detected
May 3 23:41:03 Doors kernel: [ 189.160034] usb 6-1: new full speed USB device using ohci_hcd and address 2
May 3 23:41:04 Doors kernel: [ 189.373254] usb 6-1: configuration #1 chosen from 1 choice
May 3 23:41:04 Doors libvirtd: 23:41:04.071: error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012
May 3 23:41:04 Doors libvirtd: 23:41:04.076: error : udevStrToL...

[burivoy (burivoy)]

Then, finally, somehow it gets work:

May 3 23:41:11 Doors libvirtd: 23:41:11.240: error : udevTranslatePCIIds:366 : Failed to initialize libpciaccess#012
May 3 23:41:11 Doors kernel: [ 196.552038] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
May 3 23:41:11 Doors kernel: [ 196.552092] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
May 3 23:41:11 Doors kernel: [ 196.552160] pci 0000:03:00.0: supports D1 D2
May 3 23:41:11 Doors kernel: [ 196.552163] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
May 3 23:41:11 Doors kernel: [ 196.552170] pci 0000:03:00.0: PME# disabled
May 3 23:41:11 Doors kernel: [ 196.552218] pci 0000:03:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
May 3 23:41:11 Doors kernel: [ 196.552282] pci 0000:03:00.1: supports D1 D2
May 3 23:41:11 Doors kernel: [ 196.552285] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
May 3 23:41:11 Doors kernel: [ 196.552291] pci 0000:03:00.1: PME# disabled
May 3 23:41:11 Doors kernel: [ 196.552457] ohci_hcd 0000:03:00.0: enabling device (0000 -> 0002)
May 3 23:41:11 Doors kernel: [ 196.552469] ohci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
May 3 23:41:11 Doors kernel: [ 196.552520] ohci_hcd 0000:03:00.0: setting latency timer to 64
May 3 23:41:11 Doors kernel: [ 196.552525] ohci_hcd 0000:03:00.0: OHCI Host Controller
May 3 23:41:11 Doors kernel: [ 196.552656] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
May 3 23:41:11 Doors kernel: [ 196.552688] ohci_hcd 0000:03:00.0: irq 17, io mem 0x94000000
May 3 23:41:11 Doors kernel: [ 196.638733] usb usb6: configuration #1 chosen from 1 choice
May 3 23:41:11 Doors kernel: [ 196.638968] hub 6-0:1.0: USB hub found
May 3 23:41:11 Doors kernel: [ 196.638993] hub 6-0:1.0: 1 port detected
May 3 23:41:11 Doors kernel: [ 196.640305] ohci_hcd 0000:03:00.1: enabling device (0000 -> 0002)
May 3 23:41:11 Doors kernel: [ 196.640327] ohci_hcd 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
May 3 23:41:11 Doors kernel: [ 196.640398] ohci_hcd 0000:03:00.1: setting latency timer to 64
May 3 23:41:11 Doors kernel: [ 196.640405] ohci_hcd 0000:03:00.1: OHCI Host Controller
May 3 23:41:11 Doors kernel: [ 196.640793] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 7
May 3 23:41:11 Doors kernel: [ 196.640860] ohci_hcd 0000:03:00.1: irq 17, io mem 0x94001000
May 3 23:41:11 Doors libvirtd: 23:41:11.349: error : udevTranslatePCIIds:366 : Failed to initialize libpciaccess#012
May 3 23:41:11 Doors kernel: [ 196.727485] usb usb7: configuration #1 chosen from 1 choice
May 3 23:41:11 Doors kernel: [ 196.727792] hub 7-0:1.0: USB hub found
May 3 23:41:11 Doors kernel: [ 196.727823] hub 7-0:1.0: 1 port detected
May 3 23:41:15 Doors kernel: [ 200.736025] usb 6-1: new full speed USB device using ohci_hcd and address 2
May 3 23:41:15 Doors kernel: [ 200.949257] usb 6-1: configuration #1 chosen from 1 choice
May 3 23:41:15 Doors libvirtd: 23:41:15.643: error : udevStrToLong_ui:73 : Failed to convert 'ff' to unsigned int#012
May 3 23:41:15 Doors libvirtd: 23:41:15.654: error : udevStr...