Track indication

[Rocrail]

When I set the route IDs at the tracks, the track indication (yellow) are set (if the track is set). When the second track is set the first indication is gone.
The indication should remain even if other tracks are set.

Are the "Block IDs" at the tracks set and the block is destination for a track, the indication should be grey or yellow, not red.
Is the block is occupied with a train it should be red. Red must be prior.
Grey or yellow should be a option in Rocview properties. Is it grey a route ID can set it to yellow. Is it yellow the route ID needn't set in a block, if the block ID is set.
In a real SpDrS60 the tracks between the stations are not always yellow, if a track is set. But in the station the tracks allways yellow.

[Buddace (info-dccworld)]

Similar:
The indication should remain even if other tracks are set and/or lock . Track "Unlock" operation clear track indication.

[Rocrail (r.j.versluis)]

A concept is missing here:

Most users do not use CTC functionality, and therefor it is not possible to 'release' routes.

[Rocrail (r.j.versluis)]

Fix committed in revision 1369.

[Medel (mario-edelmann)]

Rev 1369

With route ID is set:
When I start Rocrail the route indication is grey - OK.
If the route is set, the route indication is yellow - OK.
If the route is reset the route is allways yellow - wrong, it must be grey.

In the route test dialog, the route indication is missing. Only swiches are set.

[Rocrail (r.j.versluis)]

The behavior has been changed: Only locked routes are lighted out.

[Medel (mario-edelmann)]

But in Rev. 1373 it is still like posting #4

If a route is set it is yellow, but it will never be grey

[Rocrail (r.j.versluis)]

You are right.
A fix for this is made in 1374.

[Hans-Peter Bock (g-launchpad-avaapgh-de)]

Why is a track assigned to a block shown as red although the block itself is still shown yellow?

[Medel (mario-edelmann)]

If a block is assinged to a block ID and the block is yellow the track should be yellow,
is it red or blue is red right.
But if a sensor assigned to a block ID and it is aktive it should be red.

[Rocrail (r.j.versluis)]

If a block is yellow it is reserved and mostly the route is also locked.
So if a route is locked the *-route.svg is used for tracks linked to it.
Route events are evaluated first.

[Medel (mario-edelmann)]

OK, but if a block is yellow, the train isn't in the block, the signal before the block is green (yellow,white).
The track indication from the block ID should not change the colour. It remains grey or yellow form the route ID

If a sensor is assigned to the block ID (and aktive) or the block is red (blue) it must be red. - OK